My Mac keeps loosing Internet connection even on ethernet

Hi,
I connect to internet through my LAN. Earlier it use to work fine but for sometime now I have been loosing connection every 10 mins or so. I have tried every possible thing I know, including resetting the SMC, deleting the Cookies folder in Library and manually enetering the network preference details. I have encountered many people having this problem for wi-fi but my problem unique as I face it even with ethernet. It is very frustrating as I have to put my Mac to sleep every 10 mins for getting internet. It is a mid 2011 MBP with mountain Lion OS. Please Help

Have you tried resetting your router and your DSL/cable modem? Usually, you just unplug both from mains for about 5 minutes, although some modems, in particular those that have battery backup, may have a reset button.
Clinton

Similar Messages

  • RE1000 keeps loosing internet connection

    I recently bought the RE1000 extender to improve our network at home.
    I'm using the Linksys WRT610N router and Linksys WUSB600N adapters to connect, no encryption or mac filter.
    My problem is that the RE1000 extender keeps loosing internet connection, the computers are still connected to the extender with full signal strength but no internet (Network magic icon with red X).
    If I disconnect/connect to the wireless network when this happens the computer will connect to the router with only one bar strength.
    To fix the problem I must restart the extender, then it works for a couple of days again before internet is lost again.

    As you mentioned in your post that if you connect the computer with the router's network it connects with one bar but does it go online? If yes then connect the RE1000 from the Router and check the DHCP client table it will show the RE1000 IP address and then configure the RE1000 again… Here is the link for the configuration of the RE1000…
    http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=3760&userrole=Linksy...
    Wireless settings in RE1000 will be same as router… In order to get the best performance from an RE1000 you need to place the extender in an area where you still have at least 50% signal strength to your router when you place it in the final location where the RE1000 will be used. Once after the configuration of the RE1000 try to connect the wireless laptop and check the connectivity…
    Secondly in the DHCP client table the client name shows up with the Device name and not the Wireless Network Name…

  • I keep loosing internet connection

    When I bought my MAC desktop MAC Lion OS X 10,7,5 it was working fine when connected to internet but now I keep loosing the connection.  I have to turn off  wifi off on to reconnect. It happens often.  Very annoying.  Can somebody help?

    Check thru thsi, you may have to change channels, as there may be some interference on the one your are on.
    http://support.apple.com/kb/DL1483

  • 2014 mac mini loosing internet connection

    Hi, my relatively new mac mini with most current system suddenly started to loose it's internet connection. WiFi or wired makes no difference. It works for a bit then I get time outs, spinning balls and nothing works anymore. All other devices on the same wifi (iphone, ipad, macbook pro, chrom book, windows laptop, apple TV) work just fine, so it's not comcast or a modem issue.
    I'm mostly connected with wifi, I moved wifi up in the priority list. I also deleted that particular wifi account and entered everything again, it's a comcast router with wifi built in. Nothing helps. If I run the network diagnostics all things come back with a green light, but even if I try to ping some site via terminal nothing happens. All other devices run great, but I need this compuer on the net. I might take it to the genius bar, but I can't bring my wifi with me, not sure how much that would help.
    Any other ideas?
    It started sporadically, just a hickup in a video file or a minute to refresh a page, I had comcast test everything too. Now - regardless of what browser I use) I mostly get nothing, if I'm lucky I get a connection for a couple minutes before it's over again. Wifi is connected, I did not change anything or install anything (though some things might have done so automatically) and I know nothing about networking, so I never touched any of those settings, since everything worked anyway.
    Any help is greatly appreciated, I can't work without internet on that machine :-(
    Thanks!

    Hi, this has worked for a few...
    Though all of these steps may or may not be needed, I'm including them all.
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.5, 10.6, 10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x/10.8.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    (There may be better or faster DNS numbers in your area, but these should be a good test).
    Click OK.

  • Linksys E1200 patch 2.0.05 build 2 Mar 28, 2013 - still keeps loosing Internet connection

    Hi Guys,
    Anyone with the above issue - suddenly now my internet keeps loosing connectivity.
    Is it the ISP fibre issue or the cisco linksys e1200.
    Any feedback appreciated.
    many thanks in advance
    francis

    To properly isolate on which device is not working properly is to disconnect the router from the setup and connect your main computer directly to the modem (via Ethernet cable). You can observe the internet connection through the modem for at least 24 hours. If you find that the modem is working fine (stable) then the problem is with the router. So what you can do is reset the router (pressing and holding the button down) for 15 seconds and power it down for also 15 seconds. You re-configure the internet connection on the router after that. Set the wireless settings, too, like change the SSID, set the channel to something else and make sure that wireless security is enabled. You use WPA2 for wireless security on the router.
    You can check the links below as well:
    Setting up your Linksys wireless-N router without using the setup CD
    http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=22734
    Resolving dropping wireless connections
    http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=4029
    Top causes of dropping wireless connection on a Linksys router
    http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=efc03a44a5bb47bd804cf4d0eb3015c8_Top_Causes_of_Int...

  • Keep loosing internet connection

    I apologise if this isn't the right place ask this, but it I don't know where else to ask. We have a pretty regular problem with our internet. Most days (and sometimes a few time a day) we loose our internet connection completely and the only way to get it back is to unplug our router (a D-Link G604T wireless router) and then after at least 30 seconds plug it back in again. I've spoken to D-Link and they have said that the problem is with our internet provider (TalkTalk). I've also spoken to TalkTalk and they say they haven't got any problems and that it could be the router which they don't support, but it could also be the weather or that other people in the area are using the at the same time.
    I just wondered what other people thought and it anybody else had experienced similar problems.
    Thanks

    do you have time machine set up?
    if yes, observe to see if the internet drop out occurs EXACTLY when the time machine is backing up... if so, you've got the same problem as me.
    solve issue, by turning off time machine or moving to ethernet.
    here's a thread that helps
    http://discussions.apple.com/thread.jspa?messageID=9447151
    If you don't have TM set up, then please ignore this post...
    hope this helps.

  • TS1398 My week old ipad2 keeps loosing it's internet connection, even though it is still connected to my home wi-fi network. The ipad has to be rebooted to make it work, which it does for awhile, then looses connection again. Resetting the connection does

    My week old ipad2 keeps dropping it's internet connection, even after rebooting the ipad and renewing the wi-fi connection. Gets very frustrating not to have internet in the middle of a task or email.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Apple tv keeps loosing the connection with the mac

    Purchased a new desktop mac, time machine and an apple tv. everything is working splendid however the the apple tv seems to keep loosing the connection with the computer. As I sit here i see its no longer listed on the i tunes as a device, I seem to have to reset to the factory defaults again and re install it. I hope I am wrong and I am missing a step and its there and maybe I just don't know how to access it, So here I am posting this to all, Help.... I will be the first to admit I really am a little lost with this apple tv
    thanks you everyone

    I have the same problem as you do. i have had my apple tv for about 2 years now. I connect my apple tv to my iMac, via wifi by airport extreme. i used to before connect via ethernet cable to my airport extreme, i still had the same problem as you do. that itunes losses the apple tv. yet, from apple tv i can still access the internet. i have gone through all my settings on my airport, they are all correct. the connection only seems to last a few days then, it just losses connection. i have asked this question before, but now one was able to help. Apple is not interested because apple tv is just a pet project to them. you do not have to rest the apple tv every time, you just need to go to the options menu and select the connected computers and tell it to delete connection to your computer. once it has done that, make a new connection to your computer on itunes put in the new passcode and set up which films etc you want to be sync. We should not have to do this every few days. Apple needs to sort this out or at least lets us know how to stop this.

  • Do they have plans to fix the bugs with Yosemite.  I keep losing internet connection on my Mac Book

    Ever since i installed Yosemite on my Mac Book pro i keep losing internet connection.  Should I go back to mavericks because I just hate this Yosemite or do they plan to fix the bugs soon?  I did a complete clean install and I am still having problems.  I see a lot of complicated solutions and I am not that tech savvy to go into my settings.  Thanks

    All software has bugs. The first release (which you have) will be the worst.
    Many advocate not upgrading to a new operating system until it's been out for 3 months or longer. In the Windows world many recommend not upgrading until a full year has passed.
    So yes, most / some bugs and glitches will get fixed over time.   If you wish to reduce your difficulties in the future wait a while before installing ANY new OS.
    I suggest you post specific details on your Internet problems. How are you connected etc.

  • IMac keeps on loosing internet connection after a few minutes...

    Intel dual core iMac with 10.6.8 OS keeps losing internet connection after a few minutes. Need to put it to sleep and bring it up again. Than it works again...for a few minutes. Other equipment like laptops and iPad using same wifi internet connection and have no connectivity problem at all... What to do?

    Then what I suggest that you do is go to the Finder and select Mac Help in the Help menu. In Mac Help go to Index>C>Connect to the Internet. There you can read all about configuring your Mac, using a modem, etc. After you better understand how all that works then come back with your questions.
    Dah•veed

  • HT3529 I cannot activate imessage or facetime. I keep getting an error message to check my internet connection even though i am connected to the internet. Help

    I set up my ipad 2 again because it did not recognize my apple id. I chaged my password etc. but now that i have set it up and reloaded all of my apps i cant seem to be able to activate imessage or facetime. I keep getting an error message about my internet connection even though i am online. What do i do?

    http://support.apple.com/kb/TS4268

  • Cisco ASA 5505 - Keeps dropping internet connection

    Hi,
    We are having some issues with our Cisco ASA 5505 unit, it intermittently drops the outside interface connection. Internally the network appears to be working correctly with no issues. Even though the outside interface indicates it is 'up' access to the internet is lost from our LAN. This seems to be ocourring more and more often! This is happening for all users on the network too. Reloading the ASA seems to correct the problem temporally but this isn't really an option during peak periods in the day as this would obviously hinder work being carried out by employees.
    Any ideas?
    Any help would be greatly appreciated!!
    Thanks,
    John
    Running Config Below:
    ASA Version 8.2(1)
    hostname ******************
    domain-name *************************
    enable password ************************* encrypted
    passwd **************************** encrypted
    names
    dns-guard
    interface Vlan1
    nameif inside
    security-level 100
    ip address 10.3.0.254 255.255.0.0
    interface Vlan2
    nameif outside
    security-level 0
    ip address ***************** 255.255.255.248
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    ftp mode passive
    dns domain-lookup inside
    dns domain-lookup outside
    dns server-group DefaultDNS
    name-server *****************
    domain-name **********************
    same-security-traffic permit inter-interface
    same-security-traffic permit intra-interface
    access-list outside_access_in extended permit tcp any any eq smtp
    access-list outside_access_in extended permit tcp any any eq 3389
    access-list outside_access_in extended permit tcp any any eq https
    access-list outside_access_in extended permit tcp any any
    access-list outside_access_in extended permit tcp any any eq 3839
    pager lines 24
    logging enable
    logging asdm warnings
    mtu inside 1500
    mtu outside 1500
    failover timeout -1
    icmp unreachable rate-limit 1 burst-size 1
    asdm image disk0:/asdm-621.bin
    no asdm history enable
    arp timeout 14400
    global (outside) 1 interface
    nat (inside) 1 0.0.0.0 0.0.0.0
    static (inside,outside) tcp interface smtp 10.3.0.2 smtp netmask 255.255.255.255
    static (inside,outside) tcp interface https 10.3.0.2 https netmask 255.255.255.255
    static (inside,outside) tcp interface 3839 10.3.0.1 3839 netmask 255.255.255.255
    static (inside,outside) tcp interface 3389 10.3.0.1 3389 netmask 255.255.255.255
    static (inside,inside) 10.3.0.0 10.3.0.0 netmask 255.255.0.0 norandomseq nailed
    static (inside,inside) 172.16.63.0 172.16.63.0 netmask 255.255.255.240 norandomseq nailed
    access-group outside_access_in in interface outside
    route outside 0.0.0.0 0.0.0.0 *************** 1
    route inside 172.16.63.0 255.255.255.240 10.3.0.253 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    dynamic-access-policy-record DfltAccessPolicy
    http server enable
    http 10.3.0.0 255.255.0.0 inside
    http 10.3.0.0 255.255.255.0 inside
    http 10.10.2.0 255.255.255.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    sysopt noproxyarp inside
    crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    crypto isakmp enable outside
    crypto isakmp policy 10
    authentication pre-share
    encryption 3des
    hash md5
    group 1
    lifetime 86400
    telnet timeout 5
    ssh timeout 5
    console timeout 0
    dhcpd auto_config outside
    threat-detection basic-threat
    threat-detection statistics port
    threat-detection statistics protocol
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    webvpn
    username ************ password *********************** encrypted privilege 15
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
      message-length maximum 512
    policy-map global_policy
    class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect rsh
      inspect rtsp
      inspect esmtp
      inspect sqlnet
      inspect skinny
      inspect sunrpc
      inspect xdmcp
      inspect sip
      inspect netbios
      inspect tftp
    service-policy global_policy global

    Hello,
    What happens when you assign eth0 as internal interface and eth1 as outside if?
    Also configure logging (/debugging) to see if there are hardware issues or something else.
    And it seems you have a range of public addresses. What happens when you connect a device, e.g. a laptop directly on the internet access device and send continue ping to an internet host.
    When you loose internet connectivity, is the laptop still pinging to that host?
    Hopefully this helps you,
    Kind regards,
    Ralph Willemsen
    Arnhem, Netherlands

  • Keep losing internet connection

    I keep losing my wireless internet connection even though my wireless network connection says it's workinig. Today I can't access the website for 192.168.1.1 to try to fix it. any help?

    What is the exact model number and version of your router? Who is your ISP?

  • Ip4 loosing internet connection

    my phone keeps dropping my internet connection even when i have full wifi strength, it has only been doing this since i upgraded to 4.3.1. It's not my router or modem as I have the same problem at work on another wireless link. What's going on??

    sorry wrong area!

  • HT201519 Loosing Internet connection

    CCan anyone help me please. I have a Mac book that keeps losing Internet connection. Sometimes it lasts for an hour ans sometimes just ten mins. If I re start Mac it usually connects automatically again for a few mins then drops off. When I go to assistant it says my password is wrong but I know it is not wrong. It just seems to connect and drop when it feels like it. There is no problem with any other device that connects to the same bt wifi.

    Good day Mander13,
    Thank you for visiting Apple Support Communities.
    It sounds like your MacBook Pro does not stay connected to your Wi-Fi network.
    For troubleshooting this situation, I recommend the following steps from the support article Wi-Fi: How to troubleshoot Wi-Fi connectivity:
    First, try Wireless Diagnostic on your Mac to see if it can identify any additional issues with your network:
    Use the Wireless Diagnostics application included with OS X Mountain Lion v10.8.4 and later to identify and resolve Wi-Fi issues. For further information, please see About Wireless Diagnostics.
    Next, try restarting your wireless router or modem:
    Powering your modem or router off for a few seconds and then on again may resolve network issues without any additional troubleshooting. If you have phone service through your ISP, power cycling your modem may interrupt that service. You may need to contact your ISP in order to restore your phone service if your modem is reset or powered off. Ensure that you have alternative means to contact your ISP (such as a cell phone) to avoid unnecessary delays in restoring your Internet or phone service.
    After that, try investigating the range, potential causes of interference, or whether this issue occurs on other wireless networks:
    Check your range to the Wi-Fi router and reduce the effect of interference.
    If your computer is too far from your Wi-Fi router or your environment has too much Wi-Fi interference, then your computer may not detect the Wi-Fi network properly. The easiest way to check for range limits with your Wi-Fi network is to move your computer or your Wi-Fi router closer together and make sure that there are no obstructions (such as walls, cabinets, and so forth) between the router and your computer.
    See Potential sources of wireless interference for more information about interference and solutions.
    Try connecting to a different Wi-Fi network. If your computer works fine when connected to a different Wi-Fi network, then the issue may be related to your network router or ISP. In that case, contact the manufacturer of your router or your ISP.
    All the best,
    Jeremy

Maybe you are looking for

  • Help needed for SCCM SQL query

    Hello. I have the below query to extract the workstations build date as well as the hardware info. This works fine.  Select distinct v_R_System.Name0, v_GS_COMPUTER_SYSTEM.Manufacturer0, v_GS_COMPUTER_SYSTEM.Model0, v_GS_COMPUTER_SYSTEM_PRODUCT.Versi

  • Viewing/sharing outlook calendars in ical

    I am trying to view a colleagues outlook calendar in ical. I've gone through the process of sharing and adding via the outlook web app and i can see their calendar fine via web browser. I'm struggling to see it in iCal however. I go to add the calend

  • How to create extra partitions for windows 7 after installing boot camp

    hello i am pretty new at imac so bare with me and i really need help. IMAC OS X version  10.9.5  ( i think its os X mavericks ??) iMac 21. inch  , Late 2013 iMac model identifier  iMac 14,1 i installed boot camp windows 7  and it works perfectly, aft

  • Monitor out of range problem

    I have a G5 dual 2.3 with a Sony monitor (analog) connected to the DVI port by the converter that came with the Mac. I have a problem in that certain games set the default resolution to a setting that is out of range of the monitor. Specifically, the

  • Linking to a Specific Spry panel (modified for RSS Reader)

    Hi – I would like to implement the following tutorial however have it work for the Spry Framework RSS Reader: http://foundationphp.com/tutorials/spry_url_utils.php I understand the concept of this article and have been able to implement the solution