My Mac laptop screen is black but everything else is on

My Mac laptop screen is black but everything else is on.

Hey Cdronet14,
Thanks for the question. I understand you are experiencing issues with your iPhone 5. I see that you have already attempted a reset of the device. To isolate the issue further and determine if it is hardware related, the next step would be to backup and restore your device as new:
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/HT4137
After erasing and setting up as a new device, your device is now in a factory configuration. Test to determine if erasing and setting up as a new device resolved the issue. Content on the device may have caused unexpected behavior.
If the issue is still present, you may want to contact Apple Support.
Thanks,
Matt M.

Similar Messages

When I flip open my Mac the screen is black but it lights up as I close it it lights up

I recently had my screen replaced and now my screen isn't working. When I open my Mac the screen is blank. As I start to close it the screen lights up but goes black as I go to open it.

You should take it back to where the screen was replaced and have them look at it. It sounds to me as though the inverter cable is broken.

The screen Turned white but Everything else is working!??

hi
i had the macbook Core 2 Duo for About 8 months and it was working great.
yesterday i left a file download in firefox for 5 hours then went back to check on it , it was working FINE, Then i got Back after 2 minutes and the screen is suddenly white and not showing anything!!
i shut down the laptop and restarted , there was a chime and just white screen...
i connected the laptop to an external monitor AND EVERYTHING IS WORKING on the external screen but the laptop screen is white!!!
i tried resetting the PRAM and i tried resetting the SMC twice but nothing Changed>>
i can't use the apple hardware testing because the external monitor does not work till the system loads (and it does always)and i will be working blind..
so , is this a sudden hardware thing in the screen or what ?
i'm on a 3 year waranty but i don't have an apple store in my country !! can i send the laptop to them via mail?
Where can i ask them directly via mail?
i previously backed up the laptop via time machine and i can fully use it on the external display , so would a restore of system folders HELP at least rule out system errors???
i searched for similar problems but none seems to match mine because other people always had a system error , and i don't seem to have one..
Please Guys any answer might help me , i have tons of work...

If you are not showing reception bars, then I don't know how the data is working? Have you tried doing a reset? Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, check to see if it works. If that doesn't help, then try removing the SIM card, then reinserting it. If that doesn't help, then contact your carrier for assistance in calling.

Blue Screen (after restart) but everything else is fine.

Hi,
I have an Xserve 2.3Ghz DP that is running fine a dandy except that the monitor connected to it shows just a blue screen. (no Dock, no menu bar). The strange thing is that when Retrospect starts up for it's automatic daily backup, the menu bar appears but it has only "retrospect options" available, the apple menu is all greyed out. Another anomaly is that during the startup procedure, I can see the grey apple "centered" onscreen, then the blue progress bar appears with all the normal information. But as soon as it's past those screens, the display just goes to a solid blue.
As I said before, everything else seems fine, my retrospect backups are happening as scheduled.
I use this server to burn and verify all my archives, so I really appreciated having a monitor connected. I've tried three other monitors all of them display just blue.
I thought maybe the Dock was hidden, it's not. Any ideas or suggestions would be greatly appreciated.
steph

Turn off the modem while you're trying to access the router. And turn off any software firewalls or browser proxy settings.
The box said windows xp or better... So I installed Linux!

Yesterday i bought ipad4 i transfered photos from pc to ipad that it opened in ipad when i click slideshow everything went black. whenever i m opening the application(photos) full screen looking black but all photos are occuping memory.

yesterday i bought ipad4 i transfered photos from pc to ipad that it opened in ipad when i click slideshow everything went black. whenever i m opening the application(photos) full screen looking black but all photos are occuping memory.i can see the pictures in settings>brightness>wallpapers but i couldnt able to see in photos application in ipad4

I have several thousand photos in several folders. I have noticed that whenever I want to change the folder used as the side show source, it takes the Screen Saver Preference pane a very long time to respond. It is as if it is scanning all the photos in the currently assigned folder in order to display them in the preview window provided, and it gets so dogged down doing that it can't respond to my clicks on the Choose Folder option.
Assuming you don't want to redistribute your photos into a greater number of folders or subfolders so there would be fewer in each folder to process, you could try a workaround. Try moving your currently-assigned folder to your desktop temporarily, before opening the Screen Saver preference pane. If the preference pane can't find the old folder, it may immediately ask you to choose a new one. You could hopefully then do so, close the preference pane, and then put back the old folder.
It's my understanding that there will be no future updates to Tiger, only security fixes.

My iMac 27inch screen keeps going black but everything is still running in the background? please help

My iMac 27inch screen keeps going black but everything is still running in the background? please help. I have read that apple are recalling 27inch iMacs....

Hello @DesCherryBomb,
I understand that you are having issues with your HP 2310m monitor going blank and/or flickering. I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Laptop screen remains black (off) when I turn on the computer

Hello,
Today I came home and turned on my laptop as usual except this time the screen remained black. I can hear the fan running and then the usual windows chime at start up, but nothing to view. The HP logo at the back still lights up though. Just the actual screen remains completely black like it is off. I tried connecting it to my tv via HDMI and to an external monitor but there's no signal. I also tried doing a hard reset which I read about here but that did nothing. I feel as though it's just the monitor won't turn on but everything else might be fine.

Hello @brianh123,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your notebook's screen remains black when your power on your computer, and I would be happy to assist you!
Since the image will not appear on either the notebook or the external monitor, I believe there is a startup issue with your computer. To enable your notebook to power on correctly, I recommend following the steps in this document on Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot.
If the issue continues, I recommend contacting our technical support at 800-474-6836 for hardware replacement options. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

MacBook pro screen is black but computer still on...

I was using my computer one minute, then closed it and stuck it in my bookbag and then headed down a flight of stairs. When I got down there I eventually tried to open up my laptop, and the screen was black but I could hear the computer. When I got home I held down the power button to turn it off, then powered it back on. Same issue. I hear the clicking sound i always hear when I turn the computer on, but no Mac starting chime, although I don't think I've heard that in years. The power button light that goes around the power button is not on, but again I don't think that's ever on. My charger is plugged in (it's orange).
I have tried taking the battery out with the computer off and popping it back in. I tried with the computer on and popping it back in. Same issue. The other thing I noticed is it doesn't seem to be going into sleep mode when I close the screen (that front white light using flashes off and on again when it sleeps I think?).
Im going to try to take it to an apple tech person, but I am studying abroad in new Zealand so there's much less infrastructure here. Can't find an official apple store. But i did want to try some things tonight possibly to maybe fix it.
I'm thinking this might be an nvidia graphics card issue.

Just tried to reset pvram and Pmu and in the steps it says the computer should restart. It doesn't seem to be restarting for me.

My laptop screen goes black when i plug in an Hdmi cord

Initially I had both my tv and computer off. I connected the dvi to the tv and the hdmi to the laptop and turned them both on. I had no issue using my laptop as i tried to sync the computer to the TV. However i must have accidentally hit something in the graphics options as my laptop screen went black. I unplugged the hdmi cord from my laptop and the screen came back up. But now for some reason everytime i plug in the hdmi cord to the laptop the screen goes black. When i take it out it the screen comes back up. Did i change something that is causing this to happen? Any help would be greatly appreciated. Thanks

I have pretty much the same exact problem and setup as DaveA1. I have a Toshiba Satellite Laptop C55T-A5123 which I just purchased a few months ago and when I connect my laptop to my SONY TV via the HDMI cable the screen on my laptop goes black and the TV says no signal. It was working just fine up until about a week ago when I was watching a movie through my VLC player and then the screen flickered a couple times then video went completely out and I've never been able to get it to come back even once.
Here's the specs on my laptop:
http://www.newegg.com/Product/Product.aspx?Item=N82E16834114907
So far I have tried on two different TVs, swapped HDMI cables which work on my other HDMI devices, system restore and attempted to update various different drivers. I am curious to find out if Dave was able to find a solution to his problem.

[SOLVED] Connecting extra Monitor, laptop screen goes black.

Whenever i connect a additional monitor through HDMI (my only output), the laptop screen goes black. If i do FN + external_monitor switch, then the laptop screen turns on but the external monitor turns off.
If you move the mouse you can feel that the desktop has been extended as i wanted, it is just that one of the screens keeps going black. The gnome display settings show both screens as active, the menu is so minimalistic that there is not much to do.
system
[cristobal@orion ~]$ uname -a
Linux orion 3.11.4-1-razer #1 SMP PREEMPT Tue Oct 8 12:31:50 CLST 2013 x86_64 GNU/Linux
As a side note, the custom kernel is almost identical to the original archlinux one, just that USB 3.0 module is disabled.
some packages
[cristobal@orion ~]$ pacman -Q nvidia-dkms bumblebee bbswitch-dkms nvidia-utils gnome-desktop
nvidia-dkms 325.15-2
bumblebee 3.2.1-3
bbswitch-dkms 0.7-1
nvidia-utils 325.15-1
gnome-desktop 1:3.10.0-1
Any ideas?
Last edited by labotsirc (2013-10-15 18:33:18)

The problem is now fixed,
For some weird reason, this time the gnome settings did work. Must have been some sort of rare bug that now i cannot reproduce.
Last edited by labotsirc (2013-10-15 18:32:53)

IPods screen went black but assisted touch on screen still works?

IPods screen went black but assisted touch on screen still works? What's would be wrong?? I have dropped it and the lower volume button went partly in side the IPod (thats why i had the assisted touch on) and its been working very slowly fore the last week or so. but other then that it was fine.

With the information given, If the screen is completely black even after the reset, it's sounds as a hardware issue
Could be : The battery
The charger
The phone itself
You can narrow these down one by one preferably.
-If you have an extra battery, test it.
-Try another charging cable or another outlet
If neither of those affect it, you can also wipe the phone, but that's pretty much the last last step you should do since it erases everything. Then restoring it. Time varies.
If you are still having trouble, contacting your carrier, the closest Apple Store, or the technical support line for Apple.

My ipod feel and now everytime i connect it 2 my computer i fet the n/a on my desktop n when i go to restory it ... it say error 28 n the screen is black but when i do the recovorey steps the screen still looks the same so i dnt think it a black screen

my ipod feel and now everytime i connect it 2 my computer i get the n/a on my desktop n when i go to restory it ... it say error 28 n the screen is black but when i do the recovorey steps the screen still looks the same so i dnt think it a black screen so idk if the fireware is messed up or what n idk if it broking or what n if ipod store will take it n give me a new 1

From the link at the bottom of my post:
Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors
iOS: Resolving update and restore alert messages
I would do what the article and if unsuccessful make an appointment at the Genius bar of an Apple store since you likely have a hardware problem.

Laptop screen goes black when HDMI connected to TV

I have a Thinkpad Edge 431. I've set it up in Control Panel to duplicate both the laptop and the external monitor when connected by HDMI. It works fine.
When I connect it to my TV, the laptop screen black. The TV displays "No Signal" until the HDMI connection is made. When the laptop screen goes black, so does the TV screen. No sound or picture.
This was working fine until recently, and I can't figure out if I somehow changed settings to make this happen. It's clear that to me that the HDMI port on the laptop works, as does the cable.
The TV port works (I've switched the connection on the cable box to each HDMI port on the TV, to make sure they work).
I can't change anything in Control Panel when I connect the HDMI, because the screen is black.
I've updated the Lenovo system.
The other relevant piece of info: the Intel Graphics Card control panel says that Monitor/TV Settings are not supported (although until recently, I could easily display the computer on the TV).
Can anyone help with this? Thanks!

No video and audio signals to the tv connected

How do i fix my itouch. the screen is black but it still responds to touch

How do i fix my itouch. the screen is black but it still responds to touch

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

I dropped my iphone, it cracked (it alredy had some cracks in it) and the screen is black but sometimes has a background light.. When i plug it in to charge or to the computer it vibrates every 10 seconds and itunes does not recognize it. What can I do?

I dropped my iphone 4 pretty hard, it cracked (although it already had a few cracks in it) and now the screen is black but sometimes has a background light turn on and then off. Holding the home button and off button at the same time do not work. When I plug it in to charge or to the computer it vibrates every 10 seconds and itunes does not seem to recognize it. It gets really really hot when plugged in (which I don't think is normal). icloud does not recognize it under "find my iphone" either. What could the problem be? I am wondering if dropping it dislodged something inside. if so, what did I dislodge and is it possible to fix this myself?
Thanks

Sounds like that drop was a critical one, my friend. I would make an appointment at your nearest Apple Retail Store, because you're going to need a replacement. Also as a side note: the reason that the charger is making the phone vibrate over and over is because there is a disconnect somewhere in the charge port of the phone, causing it to plug in and out over and over.

My Mac laptop screen is black but everything else is on

Similar Messages

Maybe you are looking for