My Mac mail won't send my comcast mail

I have had this problem off and on for a while.
Started again yesterday. Very frustrating. Anyone else? Got a solution?

OS X Mail: Troubleshooting sending and receiving email messages

Similar Messages

  • Mail won't send in Leopard-Mail

    Hello, I know this subject has been up for a while, but can someone help me step by step to get my mail to send in Leopard? It's a POP account, and never worked in Mail Tiger, but I got it working in Entourage. Now in Leopard, Entourage won't send either. My sending options in Mail always end up in "(account name) - Offline". How can I get that active?
    I tried port 110, port 587, but maybe I have confusion in SMTP yes or no, port number,authentication yes or no ...
    Thanks for any help!

    Dear M.Bode, thanks so much for you advice. It didn't work in Mail, but it did work in Entourage!
    In outgoing I did not check the boxes for SSL, I wrote port 25, and no authentication (password).
    It sent my test mail. I did the same thing on Mac Mail, and it wouldn't work. Too bad, I'd like to use Mail, and hope the problem will be addressed and the usage made simple again. Thanks again!

  • Mail won't send attached e-mail.

    Greetings,
    I'm a new Mac user, and I'm having this problem with my mail account. When I try to send an e-mail that has attachments to it, it takes a long time to send (that is, if it sends). The little blue bar that says "Outgoing messages" is completely full, and it does not send. And it doesn't matter the size of the e-mail nor the size of the attachment, it still does not send.
    Please help.
    Att.

    I don't use Hotmail (I'm allergic to any Microsoft product ), but I'd check both your ISP's and Hotmail's maximum allowed email/attachments file size. I have a Yahoo account and they do have not only a maximum on the number of attachments, but also the file size. Are you sending it to a large number of recipients? That could be another problem - some ISP's limit the number of recipients to discourage spammers.

  • Mac mail won't send to aol addresses any advice?

    mac mail won't send to aol addresses any advice?  i can't figure this one out!  thanks.

    Hello, mrselisec. 
    Thank you for visiting Apple Support Communities. 
    I would need more information regarding exactly what is happening when you attempt to send to an AOL email address to better assist you.  However, he are a couple basic troubleshooting guide that may help with this issue. 
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    iCloud: Troubleshooting iCloud Mail
    http://support.apple.com/kb/ts4002
    Cheers,
    Jason H. 

  • TS3276 Mac Mail won't send emails with signatures

    My Mac Mail won't send emails with signatures. I get the "whoosh" sound and they show in sent mail, but the recipient doesn't receive them until I take off the signature and resend the email. Without a signature, it is received. It never used to be a problem, but started this past month. Please advise!

    Did Earthlink have you try using their authenticated SMTP server?
    If not, try changing Earthlink's SMTP server settings to the following:
    SMTP Server: smtpauth.earthlink.net
    Server Port: 25 or 587. Assuming Earthlink is your ISP, 25 should work.
    Use Secure Sockets Layer (SSL): Off or not selected.
    Authentication Type: MD5 Challenge-Response. Not sure if this authentication type is available with 10.2 and if not, select Password.
    User Name: Your entire Earthlink email address.
    Password: The password for your Earthlink email account - the same password used to check the incoming mail server for new messages.

  • Mac mail won't send Button is greyed out

    I can't send emails Mac Mail won't send The Send button is greyed out. Seems to be receiving OK & I have checked with my provider all settings are OK

    Troubleshooting Apple Mail
    What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages
    SMTP servers keep going offline

  • Mac Mail won't send .mac mail

    All of a sudden Mac Mail won't send mail from my .mac account through it's mail server even though the MobileMe sends mail just fine.
    Anyone know what may be up?
    I hate using the mobile me mail.

    I experienced the same problem--unable to SEND mail using MobileMe server. Changed to port 587, now seems to work (cross fingers).
    I also noticed that I cannot change the incoming mail server name from "mail.mac.com" to "mail.me.com." When I try to change then save, it reverts to "mail.mac.com."
    By the way, under the "Advanced" menu, can anyone explain "IMAP Path Prefix"? It's blank by default, I gather. Why might someone use a prefix here? Also the default port is 143 and the "Use SSL" block is unchecked.
    Merely curious.

  • Mac mail won't send

    Imac mail won't send messages

    See if this helps. I recieved this from Comcast back in November 2012, but may have something to do with it.
    Dear Valued XFINITY Internet Customer, 
    Action Taken:
    On August 1, Comcast announced that we will no longer support the use of port 25 for sending email. Many older email clients (such as Outlook Express) default to using this port to send email. Please read this message to understand how this action may impact your ability to send email, and what you should do next. 
    Comcast Webmail Users:
    If you use a web browser to access Xfinity Connect or other webmail service, this action will not affect your ability to send or receive e-mail. 
    Email Program Users (Outlook Express, Outlook, MacMail, etc.):
    If you use an email program, this action will disable your program's ability to send email until you change your email program settings to send email on port 465. To protect your email security, click on the link for your current email software, then follow the step-by-step instructions to change your settings.
    Outlook Express
    Outlook 2003
    Outlook 2007
    Outlook 2010
    Windows Mail
    Mail (Apple OS X)
    Don't see your email software? Then locate the preferences for your mail account in the software you use and provide the settings listed on this page. Prefer professional tech support? A highly trained, Tech Expert can remotely change your settings to secure your email. To find out about one-time service and fixes, please call 1-877-550-0793 or visitxfinity.com/SignatureSupport. If you are not using Xfinity Connect and use another email provider, please contact your provider for its recommended port settings. Most email providers offer an alternative to port 25 for sending email. If you have additional questions please visit our Help and Support site or our Customer Forums where many questions are discussed and answered by the Comcast community. Thank you for choosing Comcast! Sincerely,
    Comcast Customer Security Assurance

  • Apple Mail won't send invitations when initially closed

    I just started using iCal to send invitations for appointments through Apple Mail. When Apple Mail is opened already when I create the appointment and click Send in iCal, it works fine. The mail is sent and delivered to the appropriate address.
    But if Apple Mail is closed initially, the application starts and the invitation is queued up in the Outbox but is never sent. I can manually open up each invitation in Mail and send them individually, but why is the behavior different? Whether Mail is opened or closed when I send an invitation, it ought to deliver the invitation automatically. By not being sent, I may not realize the invitation hasn't been delivered, making the process very error-prone. Is there a way to guarantee the invitation actually gets sent without having to check the Outbox every time?
    Is this an iCal bug or an Apple Mail bug? I saw no settings in Apple Mail for sending messages at shutdown or any other setting like this. Instead, these invitations may end up being buried in my Outbox for a very long time before I notice and by then, it may be too late.

    ronright wrote:
    Since I bought a new modem/router (Netgear n600), my Apple mail won't send e-mails. It will receive. My ISP is AT&T & the email accounts are via yahoo. I have a Macbook Pro with a recent OSX.
    The most recent OS is currently OS 10.8.3.  Your system profile confirms you are still using Mac OS X (10.7.5).  If this is incorrect, please correct your profile so that you will get the correct troubleshooting suggestions/solutions. 
    Also, post in the OS/Mail forum of whichever OS is currently installed on your MBP.  It's where the OS/Mail expert helpers hang out at. 

  • Mail won't send mail when in wireless mode but works fine when wired

    Ok, this happens all the time. I have several pop email accounts, all of which work fine when I am hooked in to an ethernet cable, but Apple Mail won't send any of my outgoing mail form any of my accounts when i'm am working wirelessly.
    I always get a message like:
    Cannot send message using server smtp.name.net
    I try to switch servers and I cycle through all of them, getting them same message, followed by things like:
    The server response was: 5.1.2 Bad or missing RCPT domain k39sm5757680wah
    Any advice.

    Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list. Leave checked (enabled) only the port configuration needed to connect to Internet and Built-in Ethernet (in that order if not the same), uncheck (disable) the rest of network port configurations and see whether that helps — if it doesn’t, turn ON again the ones you want enabled.
    You may use “network locations” to more easily switch between network settings if necessary, as described here:
    Using network locations in Mac OS X

  • HT1338 mail icon not in dock mail won't send a pop down dox appears and when message placed a black dot appes=ars on red dot appears and then the message will go into draft ?

    mail icon not in dock-  mail won't send - a drop down small box appears and when a message is typed in to sent the send icon goes grey and a black dot appears on the red dot in top left side of box and the message will be sent to drafts only

    Hello Bill,
    Who is your eMail provider, the part after the @ sign?
    In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
    Then click the Show Details button & Check again.
    Mail: Can't send messages, "Cannot send message using the server smtp.xxxxx.com" alert appears...
    old: http://support.apple.com/kb/TS1482

  • Mail won't send without Connection Doctor having to be launched.

    Mail won't send without Connection Doctor having to be launched. After running Connection Doctor, it will send, so settings all must be ok. But 15 minutes later, I need to "check again" to send mail. I read previous posts on this from a few years ago, but my laptop is running Lion.

    Try just watching the "Activity" window to learn what is happening to your mail - I have found it to be most enlightening.

  • Mail won't send but Connection Doctor says smtp account OK.

    Mail won't send but Connection Doctor says smtp account OK.
    I can receive mail but can't send it from Mail 3.5. Same problem on a wired G5 and on a wi-fi MacBook (using the same account), so not hardware related. Worked fine 'till today - I didn't change anything in between times. Incoming mail no problem. Tried mail rebuild, keychain first aid, deleting the account, repair disk permission - doesn't help.
    Mail's connection doctor says "smpt.xxxxxx - connection to server succeeded, no login required."
    Anybody any ideas? Thanks, N

    Been having the same problem for a few weeks now. This has been working just fine, and all of a sudden - nothing. The update to 10.5.6 didn't do anything to fix this either.
    I've spent numerous hours on the phone with the Apple support. Seeing as the two other accounts that I have configured work with no problem, they say that this is a problem with the provider which is also the ISP. I then called the support line for the ISP and informed them of this and they say that it's a problem with the software.
    Interestingly, if I send a message to somone with the same ISP, the message will go. But I can't send a message outside of the provider. Does anyone else have this problem?
    Also, from another forum, they suggested rebuilding the LaunchServices database. The Apple support didn't see what that would do. But I tried it anyway and the problem still exists.
    Another intesting thing is certificates. It's only happened twice, but I've received the message saying that Mail can't verify the certificate XXXXX which validates the identity of the smtp. Anyone else get this? I thought perhaps I could delete the certificate and it would magically reappear. But when I go into KeyChain, the certificate is listed only under System Root and I can't delete it.
    ideas?

  • Mail won't send - why?

    Mail won't send from either account my husband has on his iPad; mine won't send from pop account away from home.

    Mail won't send from either account my husband has on his iPad; mine won't send from pop account away from home.

  • Mail won't send from photos in iOS 7

    Mail won't send from photos or from notes in iOS 7

    What did you do to fix it. My email that I create goes immediately to drafts and won't even show in the outbox. Could you let me know what you did to fix it ... please???

Maybe you are looking for

  • Wrong  file format while generating a txt file

    Hi, I am using a java application to generate a txt file. This txt file will later be used by a spider. The problem is when the file is generated it has UNIX format. It means the '\n' characters at the end of the line are not the same as in a DOS fil

  • HT202778 my disply is not working how i can i connect to my laptop

    hi im facing a problem while im using hike messanger the guided access was enabled i knew my passcode but the keypad is not showing all the digits (3,6,9,#) are not displying what do i do?? im unable to access anything

  • Accounting document for PGI showing amount

    Dear All, While doing PGI through VL02N from sales order stock, the accounting document that is generated for the material document has some amount. I am not clear from where that amount is coming since price is not maintained in the material master.

  • 2 process generate the same form

    Hi members.. I would like to clarify a statement. Is it true that, two processes were trying to create the same form at the same time what is not possible? Edited by: nyap kah wai on Nov 26, 2010 9:27 AM

  • Query on Replication

    Gurus, I am trying to replicate Business Partner from CRM to R/3 system.I am getting an error "Account group does not exist,check for classification assignment". Did any one come across such issue?How to solve this issue? Regards, Alexfleming.