My mac mini freeze every few days after updated to mountain lion

ANy solution to fix this issue?

Bonjour PanicRev16
   I use Grapher 2D 3D on my early 2006 iMac, but I tried it on my wife's Macbook Pro with Lion then Mountain Lion : no problem with Grapher 2.1 3D gcx files, Grapher 2.3 loves them !
   You can try the 3D Grapher 2.1 files from the website http://y.barois.free.fr/grapher/ and see the result on your Mac Mountain Lion.
   I updated Grapher documentation and bugs of this website on 15th december 2012 (Lion, then Mountain Lion).
Au revoir,
YB24

Similar Messages

Sony Xperia Z Wi-fi disconnect every few seconds after update 10.4.1.B.0.101

Hello,..
"Sony Xperia Z Wi-fi disconnect every few seconds after update 10.4.1.B.0.101 "
I upgraded my phone yesterday and after that it started connectivity issues with Wi-fi,
it got disconnect in few seconds and due to that its consuming too much power
also its showing power consumption due to Android System more then 50%

http://talk.sonymobile.com/t5/Xperia-Z-ZL-ZR/How-to-manually-update-downgrade-root-2013-Xperias/m-p/...
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

After updating to mountain lion on my mac pro I am unable to connect my g-raid

After updating to mountain lion on my mac pro I am unable to connect my g-raid 1T external hard drive using the firewire connection? I have 4 places to plug the firewire into, none work. All ports used to work with Snow leopard?

Try this:
Boot into Safe Mode then restart normally.
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
If this does not work to fix the problem, then:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

TS3276 hi after updating to Mountain Lion, it becomes difficult to quit Mail, always have to Force Quit. And while Mail is on standby, the fan keeps on running full power, the laptop is hot. Why is this happening?

hi after updating to Mountain Lion, it becomes difficult to quit Mail, always have to Force Quit. And while Mail is on standby, the fan keeps on running full power, the laptop is hot. Why is this happening?

If your computer was hot it wasn't asleep - it either didn't go to sleep or it work up after you put it to sleep. I've seen both things happen. First, read this article and follow the instructions.
1) For the next few days/weeks pay attention to the blinking light on the front of your computer when you close the lid. Don't put the computer into your backpack/case until it begins to blink. Wait a minute or so after it starts to blink to make sure it doesn't stop blinking - the signal it woke back up.
2) having followed the above instructions, if you take the computer out and it is hot again or if you take it out and discover it has powered down (you'll know this because when it starts up the battery will be drained and you'll see a progress bar over a ghostly display that will eventually become normal) immediately start the Console program and perform a search on 'sleep' and then 'wake'. This should bring up all the recent log files about sleep state changes (going to sleep and waking up). You should see one for when you put the computer to sleep and put it away and the next one should be just after you got it out. You'll find at least one though that shouldn't be there. That will tell you when the computer work up (when it shouldn't have) and might give a clue as to why.
One of the whys could be a magnet that is making the computer think the lid has been opened.

Line 6 tone port gx doesn't work properly after updating to mountain lion, i'm hearing artefacts, how is that possible?

i am using logic 9 and line 6 toneport gx for recording my guitar. on the previous version of OSx everything worked perfect, but now, after updating to mountain lion, i hear noise after i play something. the settings were: input: toneport, output: coreaudio, 44100, buffer 512. now they are the same and i have noise. i've installed the latest drivers for toneport and changed the buffer settings. when the buffer is large, i can play some seconds without the noise but it appears after 15-20 seconds. and when the buffer is small it appears faster. i assume it has to do something with the buffer size but i don't know for sure. any ideas?

I have the same problem after updating to ML. It's unusuable for recording until it gets sorted out.
I think it's a problem at the Line 6 end. They are aware of it, and are working on some patch/fix to address the strange artifact sounds, so hopefully it will be ready soon.
See link - http://line6.com/support/thread/86574

After updating to mountain lion, icloud password has not been accepted by system preferences

After updating to mountain lion my icloud password in the system preferences has not been accepted anymore. I already changed the password. Also the new one is not accepted by the system preferences. On iPhone and online everything is fine. Any idea?

I just got off the phone with Apple Support. They say they are having problems with iCloud and this issue should be resolved in 3-4 hours. We'll see......

After updating to Mountain lion I am having trouble printing to my wifi Epson printer

After updating to Mountain Lion I am having trouble printing on my wifi Epson Workforce 645. I keep getting an error message and my computer is set in the system prefrences to that printer

What is the error message?
Try resetting the printer queues:
http://support.apple.com/kb/PH11143
This update also clears your "computer name" in Syst Prefs > Sharing, and entering a computer name solves network print issues for many.

After updating to Mountain Lion, Mail has lost the RSS feeds, the colored marked mails folder, and the notes

After updating to Mountain Lion, Mail has lost the RSS feeds, the colored marked mails folder, and the notes. Where are they?

why did they erase something usefull and easy to use?

After updating to mountain lion, my Safari e-mail thru AT

After updating to mountain lion, my Safari e-mail thru AT&T, doesn't show the select all button at the top of the e-mail list, it is there in Chrome and Firefox. Is this a problem with AT&T's site or are others experiencing this same problem. Also my contacts list has change it's look and you can't select multiple contacts.

Hmmmm,
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   com.apple.phonenumbers
0x00007fff8e0300cb 0x7fff8e02e000 + 8395
1   com.apple.phonenumbers
0x00007fff8e02f50b 0x7fff8e02e000 + 5387
2   com.apple.phonenumbers
0x00007fff8e02f87d PNIsValidPhoneNumberForCountry + 112
Any ideas on your end on this phone number for Country???

Mein mac findet den HP-Scaaner nach dem Update auf Mountain Lion nicht mehr, oder nur teilweise und unvollkommen.

mein mac findet den HP-Scaaner nach dem Update auf Mountain Lion 10.8.4 nicht mehr, oder nur teilweise und unvollkommen. Was kann ich machen. Bin kein PC-Freak, sondern ein schon etwas betagter Rentner.

Hallo,
Einige Dinge zu versuchen ...
Bootup hält CMD + r, oder die Option / Alt-Taste, um von der Wiederherstellungs-Partition und Festplatten-Dienstprogramm von dort booten, um die Festplatte reparieren, dann Repair Permissions.
Oder ...
Mac OS X: Über den Druck-System zurücksetzen-Funktion ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 Anweisungen ...
In Systemeinstellungen> Drucken & Fax, rechte Maustaste oder Control + auf der Liste Drucker Sidebar klicken, wählen Drucksystem zurücksetzen.
wenn Sie halten Option und klicken Sie auf die "-"-Reiter setzt er das Drucksystem.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot aus dem HD, (Holding Shift-Taste beim Booten), führen Sie das Festplatten-Dienstprogramm in Programme> Dienstprogramme, und markieren Sie dann das Laufwerk, auf Reparatur Berechtigungen klicken.
Alle Geräte, die zuvor in Ihrem Printer List und Fax-Liste erschien, müssen Sie wieder nach dem Zurücksetzen des Drucksystems hinzugefügt werden.
Zurücksetzen des Drucksystems in Mac OS X 10.5.x + + +
1. Um die Druck-System zurücksetzen-Funktion in Mac OS X 10.5.x zu verwenden, gehen Sie folgendermaßen vor:
2. Wählen Sie Systemeinstellungen aus dem Apple-Menü.
3. Wählen Sie Drucken & Faxen aus dem Menü Ansicht.
4. Auf Liste der Drucker auf der linken Seite des Fensters Ctrl-Taste, wählen Sie dann "Drucksystem zurücksetzen" aus dem Kontextmenü. Wenn Sie nicht sehen, eine Liste von Druckern, Control-Klick auf den Text "Click +, um einen Drucker oder Fax hinzufügen" und wählen Sie "Drucksystem zurücksetzen ..." Als Alternative, wenn Sie derzeit einen oder mehrere Drucker aufgeführt ist, können Sie auf die Option "-" (Drucker entfernen)-Taste.
http://support.apple.com/kb/ht1341
Neustart.

Option in MAIL to "Add to iPhoto" isn't working after updating to Mountain Lion. Anybody else with this problem or sulution?

Option in MAIL to "Add to iPhoto" isn't working after updating to Mountain Lion. Anybody else with this problem or sulution?

A brief search. Or even glancing at the "more like this" list to the right will show that this is a known problem and there is no current solution. Workaround includ saving to the desktop and importing from there or opening in Quick Look and adding to iPhoto from there
LN

Late 2012 iMac Freezes every few days

My iMac has been in the Apple Store for a week with the Geniuses and they came back saying they couldn't find anything so putting this out to this community in the hope someone else can help. Here are the details.
Model: 21.5 inch Late-2012 iMac
RAM: 8Gb
Processor: 2.9Ghz Intel Core i5
Graphics: NVIDIA GeForce GT 650M 512 MB
Hard Drive: 1.12 Tb Fusion (653Gb free)
OS: 10.8.4
Software: Fairly vanilla with no MS or Adobe Apps. No system extensions or hacks installed.
Symptom: Every few days or so the iMac locks up. Certain running applications will still work but many common ones such as Pages, Aperture, App Store & TextEdit will hang when trying to open. Force Quitting them doesn't affect them. When I try to shut down the computer it goes to the grey screen and stays there. Eventually the power needs to be turned off to reboot it. This has been doing this for the last several months.
Solutions Tried:
- Fixed permissions
- Reset PRAM
- Re-install OS X
I can't replicate the crash but today it happened again. At around 3:50pm I went to the iMac and noticed that Pages wouldn't load. Force quitting the App didn't do anything. Aperture was not responding so force quit that. Still wouldn't re-open. Mail was working fine and I was able to send a test message. Safari worked fine. Launched System Preferences ok but could not launch TextEdit or App Store. Calendar opened and closed fine. Attempted to restart the Mac but got the grey screen and after 5 minutes of waiting turned the computer off & relaunched it.
Here is a snapshot of some Console entries:
5/09/13 2:27:41.316 PM coreaudiod[122]: Enabled automatic stack shots because audio IO is inactive
5/09/13 2:28:16.449 PM coreaudiod[122]: Disabled automatic stack shots because audio IO is active
5/09/13 2:28:17.262 PM coreaudiod[122]: Enabled automatic stack shots because audio IO is inactive
5/09/13 2:28:50.579 PM com.apple.usbmuxd[68]: _heartbeat_failed heartbeat detected detach for device 0xdf3-10.0.1.10:0!
5/09/13 2:37:54.690 PM com.apple.usbmuxd[68]: _heartbeat_failed heartbeat detected detach for device 0xdfc-10.0.1.10:0!
5/09/13 2:42:04.656 PM lsboxd[209]: @AE relay 61657674:6f646f63
5/09/13 2:47:21.156 PM com.apple.usbmuxd[68]: _heartbeat_failed heartbeat detected detach for device 0xe05-10.0.1.11:0!
5/09/13 4:03:23.428 PM com.apple.launchd[1]: *** launchd[1] has started up. ***
5/09/13 4:03:23.428 PM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
5/09/13 4:03:24.934 PM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
5/09/13 4:03:26.157 PM airportd[30]: _processDLILEvent: en1 attached (down)
5/09/13 4:03:26.342 PM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
5/09/13 4:03:26.609 PM fseventsd[39]: event logs in /.fseventsd out of sync with volume. destroying old logs. (419745 5 419906)
5/09/13 4:03:26.612 PM fseventsd[39]: log dir: /.fseventsd getting new uuid: A3689432-84D2-4FB0-8C25-0352BC004F8B
5/09/13 4:03:26.666 PM mDNSResponder[40]: mDNSResponder mDNSResponder-379.38.1 (Apr 25 2013 19:19:56) starting OSXVers 12
Notice that the last Console entry was at 2:47pm (in red) and then nothing. I went to use the computer at 3:50pm and did several actions on it. Plugged in iPad, opened iTunes. Copied a file from the iPad to the desktop. Prior to that it hadn't been used for several hours. The shutdown that I selected does not appear in the log (although it only managed to go to the grey screen rather than complete a full shut down).
Appreciate any clues at all here. This is very frustrating and has been going on for far too long.
TIA. Jordan

Back up all data immediately as your boot drive may be failing.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|Previous Sh' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.

Mac server hangs every few days. where to look for cause?

I have a Mac server that hangs every few days and requires a hard reboot.
It is run headless so we have no screen feed back of what is happening when it hangs.
It is possible that just the network communications fail. But it is in software because a reboot restores the situation everytime.
I could use some advice on where to look for possible causes: which logs, or dumps that are produced by the system.
Thanks

These instructions must be carried out as an administrator.
Launch the Console application.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
☞ When posting a log extract, be selective. A few dozen lines are almost always more than enough.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

I believe OS 10.10.2 is causing my mac to freeze every few seconds.

For the last two weeks or so, my MacBook Pro (2011) has been freezing every few seconds. I can barley type this now. When I pull up Activity Monitor, it shows my memory running at 3.0+ out of 4 GB's. I've tried everything I could think of. My Mac is more of a internet surfing comp so I didn't mind reinstalling OS. It worked great for about 30 minutes then everything started to freeze again. Im curious if anyone else is having this issue and if anyone's figured out how to fix it. I ran a diagnostic on my ram and thats not the issue. Im to the point of upgrading my ram but i think it's dumb reverting to that when the 4 GB has been plenty for me in the past.
Thank You.

Problem description:
System lagging every few seconds.
EtreCheck version: 2.1.8 (121)
Report generated February 16, 2015 at 4:19:55 AM PST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Early 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.3 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 216
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 384 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 2 days 23:36:23
Disk Information: ℹ️
    ST9320325ASG disk0 : (320.07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 318.84 GB (288.95 GB free)
            Encrypted AES-XTS Unlocked Failed
            Core Storage: disk0s2 319.21 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple Computer, Inc. IR Receiver
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Launch Agents: ℹ️
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    JavaAppletPlugin: Version: Java 8 Update 31 Check version
    Default Browser: Version: 600 - SDK 10.10
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Java [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         6%    WindowServer
         0%    com.apple.WebKit.Networking
         0%    fontd
         0%    com.apple.WebKit.WebContent
         0%    Safari
Top Processes by Memory: ℹ️
    163 MB    com.apple.WebKit.WebContent
    142 MB    softwareupdated
    103 MB    Safari
    77 MB    mds_stores
    77 MB    Finder
Virtual Memory Information: ℹ️
    208 MB    Free RAM
    1.60 GB    Active RAM
    1.41 GB    Inactive RAM
    1.03 GB    Wired RAM
    2.92 GB    Page-ins
    66 MB    Page-outs
Diagnostics Information: ℹ️
    Feb 13, 2015, 04:41:28 AM    Self test - passed

Apple TV icon is not showing on macbook pro after update to Mountain lion

I wanted to try Mirroring from my macbook pro to my tv using the new airplay update from Mountain lion but the icon is not showing after the update.

Welcome to the Apple Community.
AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). It also requires the computer to be using wi-fi.

My mac mini freeze every few days after updated to mountain lion

Similar Messages

Maybe you are looking for