My mac mini is not burning CD's.

My mac mini is not burning CD's. It can read CD's but writing CD's doesn't work, but burning DVD's works fine.
If I burn from iDVD it works fine but if I create a Burn Folder and drag Pictures from iPhoto to that folder it goes threw the process of burning but it spits out a Black CD. Any Ideas?
Blue skies!
Jerry

Welcome to Apple Support Communities
What OS X version have you got? Press Option key and check if you can select OS X

Similar Messages

  • 2010 Mac mini Superdrive not burning DVD's

    My mac mini is not burning DVD's right. I put in a 500GB harddrive a few months back and the SATA cables are attached correct. I can read DVD's but writing DVD's doesn't work. The process finishes but when after I eject the disc I can see that nothing is burning in the inner most part of the disc. When I put the disc back in the computer thinks the disc hasn't been burned and asks if it shuld be open in finder like a blank disc. I know a cd/dvd should burn from the center and spiral outward as it writes more data but it seems the disc is offset when it writes its first data, leaving the inner most part of the disc blank. Maybe I should reformat the OS and start from scratch to see if that helps. Any other ideas?

    Strange these Memorex DVD's worked flawlessly a couple of times then I started getting these srange burns. I think I'm going to blitz this install I'm backing up with time machine now so I'll see what happens. Is there anyway to reapply an EFI update to make sure nothing is corrupt? I did notice what looked like brownish black burns on the logicboard when I opened it up to put the new harddrive in. They were on the long solder traces where they test the logic board by the the logic boards sata connections. I keep the system on 24/7 but don't really play any 3d or do anything that is too processor intense. Another thing is the superdriver seems to favor the left side when a DVD is initially inserted and ejected but moves to the conter when pressed all the way in I can't remember that being normal.

  • HT1338 mac mini does not burn cds?

    Can't get any burning of cd's or dvd's on the older mac mini that takes has a superdrive built in. It will play discs but just won't burn. I'm guessing I'll need an external device added, and if so what is out there?

    You say "older mac mini," but this is still the "Late 2009" model, correct, not a really old "G4" (pre-Intel) Mac mini?
    What method are you using to burn discs?  Using Disk Utility to burn a disk image to disc?  Using Finder to burn a Burn Folder to disc?  Using iTunes to burn a playlist to disc?  Using a third-party application, like Toast?

  • My mac mini failed to burn a playlist onto a blank cd, and now it will not eject the blank cd. what can i do?

    my mac mini failed to burn a playlist onto a blank cd, and now it will not eject the blank cd.
    leonardfromlancaster

    If you can't eject a CD or DVD or open the drive tray
    How do I eject a defective DVD?: Apple Support Communities
    How to eject a CD on a MAC mini with PC keyboard and mouse « FAQforge
    How force eject disc: Apple Support Communities
    Download ForcEject Tool for Mac - Force-ejects discs stuck inside SuperDrive. MacUpdate.com

  • Mac mini can not find the NAS

    In my network I have a Mac mini, AirPort Extreme base station and a Netgear ReadyNAS Duo v2. Everything is connected by cable. The problem is that the Mac mini can not find the NAS. Mac mini is looking for wirelessly connected devices, type TimeCapsule. How do I get my Mac mini to find the NAS and set the NAS as a source of data storage?

    I have a ReadyNAS and use it as a Time Machine destination with no problems, even over WiFi. The ReadyNAS and Mac are both on the same LAN (even though the Mac is on WiFi), please check to see if your WiFi is on a different LAN to the Ethernet side of things, I have my Airport set to bridging mode so both sides of the AirPort count as the same LAN.
    Next you need to check you have actually configured Time Machine in the ReadyNAS, as shipped it is initially turned off. You need to go to the ReadyNAS web management interface (FrontView) and then click on Backup on the left, and then select Time Machine. You also need to make sure Bonjour is enabled for the ReadyNAS, this is accessed by clicking on Services on the left and then selecting Discovery Services, make sure all the Bonjour options are ticked on.

  • My mac mini will not let me log in.   it says i can change my login info with my apple id.   no good!   help desk stumped!   Help!

    my new Mac Mini will not let me log in.   I shut it down while away on vacation and now it will not accept my password.   I tried to log in with my apple ID and it still would not accept it.   I stumped the apple help desk.   Help!

    User Password Reset

  • How do I combine my content from 3 external hd's and my 1 Mac Mini to my new Time Capsule (which is connected to my Mac Mini) and not have to use my external hd's again? My Mac Mini wont hold all the content on the external hd's.

    My 3 external hd's are 500GB (total 1.5TB) and my Mac Mini is 500GB (Time Capsule is connected to this). I want to be able to have all the content from all these sources stored on my Time Capsule as if I only had 1 external drive. Is this possible? It is my understanding that when Time Machine backs up my Mac Mini I have to have my external drives connected since my Mac Mini does not have enough space on it to hold all the content on the exgternal hd's. I can only connect 1 external hard drive at a time and I want to get rid of them and consolidate.
    And having to go back in time to search for files on 1 external hard drive and then back in time for the other external hard drive is not the most efficient thing to do. I would like it all in one place.
    Thank you for your help!!

    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Application Support/SyncServices
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • My mac mini will not shutdown with either Mavericks or Yosemite (following a clean install)

    First noted while running Mavericks, my Mac-Mini will not shutdown.  It just hangs on a black screen with the little icon.  I created a clean user account and the problem went away.  Rather than do a fresh install of Mavericks, I waited until Yosemite came out.  I reformatted the drive and did a fresh Yosemite install.  I then restored my apps and data only to find the problem is still present.  I've also tried stopping many of the applications I would normally expect might cause the problem with no luck.  And I tried the one Yosemite suggestion regarding deleting the Library/Caches folder content with no luck.
    My naive question:  following the fresh install of Mavericks, should I have done a re-install of my (very many) applications instead of a restore from an image?
    I've tried looking at the system logs after I've forced a shutdown with the power button but there's nothing I could find that shows any problems.
    Any other suggestions of things to try would be appreciated.

    Hi,
    Thanks.
    It is running 10.5.8.
    I am trying to boot up an external drive with 10.5.8 on it. It works on my Macbook Pro which is running 10.5.8, runs on my IMAC running SL. But doesnt work on the mac mini?
    It had been running SL, however there are a number of programs I have like Windows Live Sync which are not yet compatable with SL so i downgraded to 10.5.6 which came with the Mac Mini then loaded all updates.
    It seems to just go into an auto reboot as soon as i click on it.
    i thought it might be the firmware? Is it possible to downgrade them and then re-install?
    I have reset the PRAM.
    Any help would be appreciated.
    Thanks

  • Help, my Mac mini will not start up, only keeps thinking on first page( white screen with apple emblem)

    Help, my Mac mini will not start properly. Only goes to the white screen with thinking. Will not go to the password section

    Are you sure about your hard disk health, any clicking noice recently?
    Go to boot menu (press option button or button left to your space bar while booting) > Select Recovery drive > Disk utility > Verify the volume on which OS X is installed.

  • My Mac Mini will not read TDK disks from my iMac G3.

    My Mac Mini will not read TDK disks from my iMac G3.
    I used an iMac G3 (2001) -- the ones that looked like a big pod -- running on OS X and saved files to TDK  CD-R, 700 MB disks, which worked fine. Now that I have a Mac Mini (model number  A1347) I cannot get this computer to read those disks, made on the iMac G3.  Once inserted each disk will open and I can retrieve files for a short period, then the problems start. The computer makes some noises, the beach-ball/pinwheel goes around and I cannot get the files to open or the disk to eject. After a while the disk does eject -- to my relief. I keep using Control+E until ejection happens.
    My Mac Mini (2010-2011) is hooked up to a View Sonic HDMI LED monitor, an iOmega external hard-drive for backing up, an Epson Stylus C88 Plus printer and to the internet by a fibre 10MB feed. The Mac Mini runs on OS X version 10.6.8 Snow Leopard: Processor Speed:2.66 GHz
    I took the Mac Mini to an Apple retailer and he hooked the computer up to one of his monitors and it read the TDK disks just fine. I am now using Sony CD-RW, 700 MB disks, but I would prefer to use my TDKs because I have such a large pile of blank ones to use and there are those TDK disks with information that I want to look at from time to time. Can anyone tell me what to do?
    DJG

    Try disconnecting everything attached to the Mini except the monitor.
    If that doesn't work, try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later. If successful, copy the files to the original account Public/Dropbox.
    Isolating an issue by using another user account
    If the problem is still there, try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode - About
                    Safe Mode

  • Hello, mac mini will not boot. I get a file symbol with a question mark, then a white screen, Hello, mac mini will not boot. I get a file symbol with a question mark, then a white screen

    Hello, My mac mini will not boot. When I turn it on, I get the chime, then the white screen, then the apple symbol, then a file symbol with a question mark, then the white screen and then it stays like that.
    Is this a bad hard drive?

    Sounds like it.  Try booting from your OSX restore DVDs - startup and hold down "C".  This will take AGES! Then run Disk Utility from the menu. 
    The flashing ? means your system is corrupt, dead, not there, on a dying HD, etc...

  • HT4759 My mac mini is not updating its software to OSX Lion v10.7.5.  I would like to use iCloud on my desktop along with my iphone and ipad but the auto updates are only upto 10.6.8.

    My mac mini is not updating its software to OSX Lion v10.7.5, which I need for iCloud.  I would like to use iCloud on my desktop along with my iphone and ipad but the auto updates are only upto 10.6.8. 

    You need to get the newer version from the Mac App Store.
    (70404)

  • My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen

    My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen.
    I have tried with a wired USB keyboard and mouse using a single screen. Powered up with option pressed. No change.
    Reset SMC  no change

    Run the Apple hardware test to see what it tells you. Run the extended test when prompted, which can take awhile.

  • ITunes on new Mac Mini does not show shared libraries on network or songs on NAS drive

    iTunes on new Mac Mini does not show shared libraries on network or songs on NAS drive
    The latest version of iTunes on a 3-month old Mac Mini (8 gig RAM, OS 10.10.2) does not see any of the shared iTunes libraries on a  MacBookPro (MBP) (OS 10.9.5) and a 14-month old Mac Mini (OS 10.9.5). And a network shared drive/media server does not appear as well. I have a Gigabite Ethernet G4 and on it, the MPB and the "old" mini I can see the various shared music libraries and NAS, but not on the new Mini.
    The little house with a music note inside it that I see on the upper left corner of the iTunes 12.1 window on my MBP does not appear on iTunes 12.1 on the new Mac Mini. I have gone through all the iTunes preferences and can not find where I can turn on this feature. The new Mac Mini is on the local network and I can reach the internet successfully.
    I have been using iTunes since its beginning (still have a PowerTower Pro with a working copy of SoundJam), so I am not a newbie, but this has me baffled.

    May I add, that I gave full rights to the user at the Mac Mini to access and change data on the server drive for ITunes Media.

  • I TUNE IN MY MAC MINI COULD NOT BE OPENED. WHEN I CLICK THE I TUNES ON THE DOCK, I GET A PROPMT SAYING THE, "THIS COPY OF ITUNES IS CORRUPTED OR NOT INSTALLED CORRECTLY. PLEASE RE-INSTALL ITUNES. -42037. WHAT I SHOULD DO PLEASE?

    I TUNE IN MY MAC MINI COULD NOT BE OPENED. WHEN I CLICK THE I TUNES ON THE DOCK, I GET A PROPMT SAYING THE, "THIS COPY OF ITUNES IS CORRUPTED OR NOT INSTALLED CORRECTLY. PLEASE RE-INSTALL ITUNES. -42037. WHAT I SHOULD DO PLEASE?  wasantharama

    If I were you, I would reinstall itunes. BACKUP ALL YOUR ITUNES MEDIA TO AN EXTERNAL STORAGE DEVICE BEFORE DOING THIS PLEASE.

Maybe you are looking for

  • Qosmio G20-105 tv card upgrade

    My much loved G20-105 came with an Analog TV Tuner card and I would like to upgrade it to DVB-T TV Tuner card. Is this possible and is it simple a question of taking the old one out and replacing it with the new one? Also where can I get one?

  • Is keeping the your macbook plugged in while battery charged ok?

    Is it harmful to your macbooks overall battery life if you keep it plugged in if the battery is fully charged?

  • Software driver for iphone

    my new iphone is not detected in my pc. is says my software is undetected.. need help please

  • Premiere Pro CC Crashes when I Open a project

    The title explains it all. I just bought Adobe Creative Cloud and I'm not sure how to check errors or logs, but basically the app will open and go to the Welcome Window, but when I make a new project or open an existing one the program crashes. Any h

  • NOISE NINJA 64-BIT Plugin for Aperture 3 RELEASED!!!

    Hi all, Picturecode has just released their best-in-class Noise solution in 64-bit for Aperture 3!!! I have been a NN fan for a long time, and I am going to go play with it now. Available as a download for registered users at http://www.picturecode.c