My Mac Mini mid2011 powers off using Windows 8 pro?

after installing windows 8 my mac mini turns off.

Ok I was just checking to see if it was crashing. It it had the crash report would of been in the minidump folder.
Seems Windows 8 is taxing the system and it is Auto shutting down. You can install a temp monitoring program to see what the temps get to. Also look in Task Manager to see how many processes are running and the CPU load.

Similar Messages

Mac Mini G4 powers off after 45 secs to 60 secs

Symptoms: When I boot up my G4 Mac mini, about 45 seconds to 60 seconds after the boot up chime, the Mac Mini justs powers off (as if someone just unplugged the power). There is no warning, and it happens in different places (sometimes during the bootup process, sometimes immediately after bootup completes). Another thing I notice is after I turn power on, the power light is solid for about 10 seconds, but after that, it starts pulsating (like in sleep mode, only it's not in sleep mode).
Events that may be related: I started having this problem directly after replacing the internal hard drive. I was grounded, and I didn't see anything get zapped, and there were no electrical incidents. However, it's hard to think that this activity doesn't have something to do with the problem.
Any ideas what this could be? I'm okay with working with the internals of this machine, but I just need a little direction. Apple does not appear to have much tech documents on the subject.
G4 Mac Mini Mac OS X (10.4.7)

Update: I have determined that this is due to a bad connector on the internal fan. One of the wires in the connector popped out, and when I put it back in, the first time it went in backwards, so when I tried to attach the fan cable, it crimped the end of the wire connector. That means that it doesn't securely fasten to the internal board. I can situate it to the point where it touches for awhile, and during this time, the Mac Mini does boot up with a solid power light, and stays on. However, eventually the wire goes loose, shutting down the fan, which in turn shuts down the Mac Mini.
Things I've tried:
- I've searched for a fan replacement on the web, but it cannot be found for purchase (not even on eBay).
- I went to Frys Electronics, but they don't have the fan nor that connector.
- I went to the genius bar at the local Apple store, and was informed that Apple nor Apple Authorized businesses are "allowed" to sell me the part. They did confirm that the fan not properly connected would cause the symptoms I'm experiencing.
I guess at this point, I need to do one of the following:
1. Find an unauthorized Apple repair business would be willing to sell me this part.
2. Figure out how to fix the connector on the wire so that it securely attaches to the prong.
3. Pay Apple over $100 to fix what is basically a $5 repair (this option is largely undesireable).
4. Find someone who is throwing out a broken Mac Mini where I can scavenge for the fan.
Any other suggestions, or any help in accomplishing my goal would still be greatly appreciated.

I have a mid 2011 27 inch iMac and a late 2012 mac mini. I am using the 27 inch iMac as the display for the mac mini. I was trying to use bootcamp on the mini but after I started downloading windows I can't get it to display on the iMac.

I have a mid 2011 27 inch iMac and a late 2012 mac mini. I am using the 27 inch iMac as the display for the mac mini with a thunderbolt cable. I was trying to use bootcamp on the mini but after I started downloading windows I can't get it to display on the iMac.

Hi there,
The simplest way is to drag it across wirelessly using the 'Airdrop' application once both computers are near one another. 'Airdrop' can be found near the top, on the left hand side menu, within 'Finder'.
AJ

I am trying to log onto a Mac Mini I haven't used in awhile and I forgot the password. I am trying to reset the password with my apple ID but the computer keeps saying the Apple ID and the password are incorrect whenever I know they are.

I am trying to log onto a Mac Mini I haven't used in awhile and I forgot the password. I am trying to reset the password with my apple ID but the computer keeps saying the Apple ID and the password are incorrect whenever I know they are, as I am using the exact same ID right now.
I have switched my password in the past, so my theory is my mac mini thinks that my password has not changed and it will not update because The Wi-Fi password has also changed so it cannot connect to any servers...Does that sound like I am on the right track?
Is there a way to update my Wi-Fi password (saved into the computer) without logging on?

If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.

I'm using premiere pro CC 2014 for 4k editing. whenever I play the sequence cut off only window (premiere pro cc 2014).

I'm using premiere pro CC 2014 (trial version) for 4k editing.
but I saw the play sequence problem.
whenever I play the sequence cut off only window (premiere pro cc 2014).
but mac was fine.
I can't using realtime play.
my sequence setting information
sequence > sequence settings
editing mode : custom
timebase : 59.94 frames/second
video
frame size 3840*2160
pixel aspect ration : square pixels(1.0)
fields : no fields (progressive scan)
display format : 60fps
audio
sample rate : 48000 Hz
display format : audio sample
video previews
preview file format : quick time
codec : Gopro Cineform
Maxium bit depth : uncheck
Maxium render quality : uncheck
composite in linear color : check
check it please my workstation spec.
1. HP Workstation (Z840)
    * CPU : Intel Xeon E5-2690v3 2.6Ghz
    * RAM : 128GB
    * Graphic Card : Quadro K5200

Now I see is fully integrate with the OS preference. If you change the scale in windows resolution Preference, Premiere Pro scale too.
Thanks.

How can I split the video port of an older Mac Mini so I can use both the 922-6199 DVI to RCA, S-Video Adapter and a Cinema Display?

How can I split the video port of an older Mac Mini so I can use both the 922-6199 DVI to RCA, S-Video Adapter and a Cinema Display?

Which exact Mini?
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

I am semi-retiring my old mac mini and want to use it as a hard drive for my macbook pro. Does anyone know how to do this?

I am semi-retiring my old mac mini and want to use it as a hard drive for my macbook pro. Does anyone know how to do this?

1. Remove the drives, install them in external enclosures.
2. Use a Firewire cable to connect to your computer. Boot the mini into Target Disk Mode - Transferring files between two computers using FireWire

HT4628 I have Mac Mini that I connect wirelessly. I want to share that internet on this mac mini with my receiver using wired internet. Is it possible? How?

I have Mac Mini that I connect wirelessly. I want to share that internet on this mac mini with my receiver using wired internet. Is it possible? How?

Is it the same user/iTunes account or...?
Syncing to a new computer should give you the opportunity to replace the exisiting contents with the new.

The numeral part of my keyboard causes my mac mini to freeze when using the 0 - 9 keys

The numeral part of my keyboard causes my mac mini to freeze when using the 0 - 9 keys.. I have to restart to continue.
Does it have to do with the disk utility?
I already did the disc repair job

Open System Preferences - Universal Access and check whether 'Mouse Keys' are activated.
If so, then deactivate them. They could be the cause of your problem.
Stefan

I have a Mac desktop OSX Version 10.7.4 upgraded to Lion to use iCloud. Now my Parallels Desktop 5 for Mac/Build 5.0.9376 using Windows 7 does not open. What upgrade of Parallels do I need to make this work?

I have a Mac desktop OSX Version 10.7.4 upgraded to Lion to use iCloud. Now my Parallels Desktop 5 for Mac/Build 5.0.9376 using Windows 7 does not open. What upgrade of Parallels do I need to make this work? Or what do I need to do at this point?

Thank you Shootist007. I appreciate it!

HT201413 i am using windows xp pro on a laptop, i access the internet thru a wireless connection, no problems. i start itunes and it will not connect to the internet

i am using windows xp pro on a laptop and have never had a problem accessing the internet, and still dont.
i purchased an iphone 4 and would like to sink it with my laptop, i installed itune 10.6 and it (itune) will not connest to the internet.
this can not be a hard problem to solve, but i need help
thanks

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Newly installed Acrobat will NOT open from Creative Cloud app on Desktop using Windows 7 Pro - what's the problem?

Newly installed Acrobat will NOT open from Creative Cloud app on Desktop using Windows 7 Pro - what's the problem?

the cc desktop app is used to install and update cc programs (and a few other thinigs). but that does not include 'opening' the installed programs.
click your start button or your program files directory to find the acrobat executable to launch acrobat (and any of your other apps, adobe or otherwise).

I am using windows 8 pro in my laptop, when i try to install icloud 3.1 its giving me a error message " this app cant be run , check the version " what should i do now ?

i am using windows 8 pro in my laptop, when i try to install icloud 3.1 its giving me a error message " this app cant be run , check the version " what should i do now ?

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Trying to install Windows 7 on Mac Mini Mid2011

Am trying to install Windows 7 on Mac Mini (Mid 2011) OS X Mountian Lion (10.8.2) - 2.3GHz/i5/4GB/500GB with external optical drive attached. Using Windows 7 Ultimate (on USB Flash Drive) and Windows Support Software (on separate USB Flash Drive), as the external optical drive is not recognized when Boot Camp restarts to begin installation process. Here are some issues I am having:
Going through BCA, when selecting the new partition to install on (Disk 0 Partition 4 BOOTCAMP), the warning of "cannot be installed...", so I select Drive Options (advanced)/Format. Drive is reformatted to the NTSF, but loses the BOOTCAMP name. (Reformats to UNTITLED);
Installation of Windows 7 proceeds, until after its third restart and the color bar with the light burst at its center appears at the bottom of the screen with messages stating "Preparing....". The computer then reboots and starts this endless boot loop.
As it never gets to the part where the Windows Support Software is engaged, can I have both the Windows 7 Ultimate installation and the WSS on the same USB?
I have been researching this issue, but with no difinitive solutions (other than snarky "You obviously didn't read the prior post for this issue..." & "Don't people READ previous posts?" responses.), other than one rude reply saying this was a known issues and there is a fix/driver for it, but no reference as to where this fix resides.
Please if anyone has a solution, I would be very grateful for serious and considerate answers. If you feel the need to be rude/snarky/downright unhelpful, don't reply. This is a community help page, not your venting page.
Thank you in advance for all serious replies.
JAMinard

Right now I have 6 different systems installed. Windows XP, 7, and 8 plus Linux Mint, Commodore, and OS X Snow Leopard (for old times sake), all running on Mountain Lion.
I recommend reading the user manual as it greatly helps getting through the steps, however an intuitive person should pick it up fairly easily.
Thanks to BobTheFisherman for the link.
There are other ways to get Windows on a Mac but I'm a big fan of open-source software.
Give it a try. You might like it or it may not be your cup of tea.

If I turn off Mac Mini Mid2011, LED doesn't turn black.

I turned off the Mac Mini Mid 2011. BUT, the Mac Mini's Light(White LED) doesn't want to turn off and the only way to COMPLETELY shut down is to force shut down.I'm worrying about bad sectors so I'm asking.
Is there any way to solve?

mazwig wrote:
I just want to know if I turn off iMessages and iCloud Back up, and ONLY use SMS myself and my family just SMS's me - and do this on my PHONE ONLY and not touch his ipad (so he doesn't know), if he will get any of my messages I send or receive on his ipad please. Its just a temp thing and I just want to take action myself on my own phone and want to know if this will work. Does anyone know?
SMS messages will not go to the iPad Mini. It's not capable of receving them. If you have access and can do it without it causing a problem, remove your iPhone from the Apple ID Support profile:
Go to: https://supportprofile.apple.com/MySupportProfile.do
Log in if not already logged in.
Click on "Edit Products"
Click on the "X" to the right of the product.
Click "Unregister"
If anyone in your family uses iMessage, they will go to both you and your boyfriend unless you do that.
To be completely safe, you may want to simply use an alternate message app such as Skype, Viber, Whatsapp (assuming everyone has a smartphone) until the issue is resolved. Google Voice will also allow you to send and receive texts to another number on your phone.
Best of luck.

My Mac Mini mid2011 powers off using Windows 8 pro?

Similar Messages

Maybe you are looking for