My mac mini starts up no video

my mac mini starts up with a chime no video to the monitor any suggestions?

Restart the computer with the Option, Command, P, and R keys held down, and release them when you hear the second startup chime; this clears a setting which causes it to start up into verbose mode each time.
(35613)

Similar Messages

  • Is it possible to connect an external blue ray drive via USB with a mac mini to watch HD videos?

    Is it possible to connect an external blue ray drive to a mac mini to watch HD videos? Iy yes, what additional software / hardware is necessary?

    Saul in PA wrote:
    There is some new software that allows playing:
    http://www.macworld.com/article/160977/2011/07/blu_ray_movie_playback_comes_to_t he_mac.html
    Did you even read the article you linked to?
    Here's a quote from it
    "The video itself looked fine when it played properly, but it stopped and started constantly, and often displayed with huge, ugly artifacts. And at times, the app would freeze completely and require a force quit.
    Just to make sure it wasn’t a problem with one Blu-ray disc, I tried some others. With Hot Tub Time Machine the results were much, much worse. It got a few seconds into the United Artists logo before the movie and completely froze playback. On several attempts. With David Cronenberg’s The Fly, playback was generally better—but the software played the ‘making of’ movie instead of the actual film. I thought there might have been a preference to help with the movie selection, but—wait for it—the Preferences item didn’t do anything when I selected it."
    Not very promising is it

  • 2006 Intel Mac mini starts to load then turns off and sometime a kernel panic warning will appear

    Mac mini starts then powers off before loading osx and sometimes gives a kernel panic warning

    Tough without the Install disc, but some things to try...
    Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
    /sbin/fsck -fy
    Repeat until it shows no errors fixed.
    (Space between fsck AND -fy important).

  • Mac mini starts so slowly

    Mac mini starts so slowly

    After it does start open the Console app in the Utilities folder and look for log entry errors/problems during startup and post them here.
    Running this and posting the results here may also help us determine what is going on
    EtreCheck

  • Mac mini start up shut down code

    I appreciate the two responses, from '300Tech' and TITOUMAX to my original question.
    I was reluctant to take the "sudo halt" terminal suggestion since a warning loomed over the danger of losing data.
    I was unable to post a copy of the code sequences suggested by TITOMAX since the problem was solved by the time I saw his post.
    I received an answer from Apple.
    I was able to halt display of start up and shut down code by shutting the Mac mini down and starting the machine while holding down  "cmd option PR" keys until the computer gave the normal start sound followed by a repeat of the start sound. This procedure led to a normal start up process and also a normal shut down process without the display of the "start up code" during start up or the display of the "shut down code" during shut down.
    By the way, holding down the "cmd option R" keys with my left hand while pressing the Mac mini start button with my right hand and quickly getting my right hand in place to hold the "P" key was tricky, but only took two tries to achieve success.
    I was concerned that the display of those lines of code was an indicator of an impending problem. It turned out to be an unintended feature following replacement of the logic board.
    By the way, Apple Care has been wortwhile for me.

    Thanks for the report, that's called a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379

  • URGENT Help: Mac mini starts up, then just "died down" (power down...)

    Hello all. This is my sis's Mac mini Intel.
    Was actually booting from Leopard OS X thinking of an upgrade OS, ran Disk Utility and it reported some error cannot be repaired:
    Invalid sibling link
    Volume check failed
    Error: Filesystem verify or repair failed
    So I gave up the idea, quit the installer and restart, and press "Eject" to get the disc out.
    *But now, it seems like when the Mac mini starts up, with the grey Apple logo and the spinning wheel, after a while, it just "stops", "fades away" and power off. Like a "sudden shut down" or "sudden sleep"*
    So far I have *tried reset PRam* and also and SMU or something (plugging every cord out etc) but to no avail.
    *HELP!! At least I want to be able to do a boot up to retrieve all the data before any hard re-format or something*
    Thanks and cheers

    It is possible, with the errors Disk Utility reported, that some (possibly even all) of the files on the drive will be damaged or inaccessible, so it is best to proceed with some caution.
    There are several possibilities for recovering the files, all dependent on the situation. You could, for example, remove the hard drive from the mini, fit it in an external drive case and connect it to another system. That would, in my view, be the best option. Alternatively, you might be able to get the mini into firewire target disk mode (hold the T key down during bootup) and connected (via firewire) to another Mac, rescue files that way, or boot the system from an external drive which has a valid MacOS install for that system, and then rescue files from the internal drive.
    You may find, if the drive's data structure is corrupt, that even if you can access the hard drive via any of the methods above, you'll need a utility such as Data Rescue II (http://www.prosofteng.com/products/data_rescue.php) to locate and retrieve what you need. You might also consider use of a utility such as DiskWarrior (http://www.alsoft.com/DiskWarrior/index.html) as a means to attempt a repair of the disk so that it can be returned to use - though this is by no means certain to succeed, and may not resolve potential data loss.

  • My Mac Mini starts to boot up then after a few minutes turns off.  Please help.

    My Mac Mini starts to boot up then after a few minutes turns off.  Please help.

    seen this happen many times, usually always due to corrupt memory.......could be a power module in the Mini, but unlikely.  hold down command R on startup, see if you can get into safe mode or ANY SCREEN ...If under warr. call mac for a service check, ....BUT if you have spare memory around that is compatable, try that first, process of elimination diagnostics.

  • Mac mini 2011 in itunes video podcasts wont start. all systems updated.

    I can play audio podcasts fine, video podcasts wont play. After clicking on to start with, the podcast does nothing, just hangs. All operating system, quick time, itunes are up to date.

    Hi Amiel,
    Take a look at the article linked below, it provides a lot of great information and troubleshooting tips that can help you resolve the Home Sharing issue with your Mac mini.
    Troubleshooting Home Sharing - Apple Support
    Take care,
    -Jason

  • Mac Mini with DVI to video adapter REFUSES to display on TV!! Please help!!

    I purchased an apple DVI to Video adapter - which says for Mac mini and power mac G5 on the package. However not matter what I do, I can't get a picture on my TV, I have tried on 2 TV's and I get nothing but blank screen on both, with occassional grey flicking.
    I thought maybe the adapter was faulty so had it changed, the new one shows the exact same behaviour. I have started up in safe mode, with the TV connected and still nothing, I have reset the PRAM and still nothing. Trashed the windowserver plists - and still nothing!!
    I have searched through the forums as much as I can and can't find any answers.
    Someone please help me out and tell me what I'm doing wrong.
    Thanks very much.
    Naj

    Hi Thesserax,
    Thanks for your reply, however I have already tried your suggestions - my tv's do not let me switch manually between PAL/NTSC, and I am definately on the correct channel.
    I also tried connecting it to the TV and VNC'ing into it to try to change the resolution, however I although I see the correct CRT resolution opions i.e. 800x600 and 1024x768 only, I notice that I don't see any tv specific options such as overscan, and that the rates are stuck at 60Hz (NSTC) - I am in europe so the tv is PAL 50Hz and the adapter is also labelled PAL.
    Any other ideas, please?
    Thank you

  • Mac mini (late 2012) HDMI video going blank randomly in Yosemite 10.10.1; sometimes comes back on with snowy screen

    Wow, this reminds me of what happened with Mavericks 10.9.0 until 10.9.3 and later were released and fixed this problem.
    My monitor is a Dell S2440L connected to my Mac mini late 2012 via an HDMI cable.
    The monitor goes blank randomly and sometimes a snowy screen like you would see when watching a UHF
    channel on an old CRT TV shows up when the video comes back on. This happens while in the OS.
    I also have power management problems again with computer not sleeping properly and my Magic Mouse
    being able to wake up the computer despite "Allow Bluetooth devices to wake this computer" being unchecked.
    I also have Wake for network access, power nap and start up after power failure unchecked as well.
    Computer sleep and display sleep are set to "never" as I always had it with Mavericks.
    These problems occurred after shutting down my Mac and restarting it this morning.
    I know using a VGA cable will fix it but I don't want to do that.
    Sorry for sounding frustrated but I'm not alone. So many people are having the same issue
    of HDMI video blanking out while in the OS.
    I love the look of Yosemite but wish I was back with Mavericks 10.9.5 where everything worked
    flawlessly and I really mean flawlessly. It was magical. Not a single problem.
    I guess we have to wait for 10.10.2 or 10.10.3.
    I don't want to go back to Mavericks but if my screen keeps blanking out then my computer is of
    no use for work or multimedia.
    I'm sorry about the rant.
    If anyone has figured out a workaround until Apple can issue another point release, please let me know.
    I already tried resetting the SMC and NVRAM several times to no avail.
    Thanks in advance.
    I appreciate any help.
    Paul

    EtreCheck version: 2.1.2 (105)
    Report generated 13 December 2014 at 9:03:00 AM GMT+7
    Hardware Information: ℹ️
      Mac mini (Late 2012) (Verified)
      Mac mini - model: Macmini6,1
      1 2.5 GHz Intel Core i5 CPU: 2-core
      16 GB RAM Upgradeable
      BANK 0/DIMM0
      8 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      8 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 4000 -
      DELL S2440L - forced RGB mode (EDID override) 1920 x 1080 @ 60 Hz
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 0:53:11
    Disk Information: ℹ️
      APPLE HDD HTS545050A7E362 disk0 : (500,11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) / : 249.62 GB (150.23 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD 2 (disk0s4) /Volumes/Macintosh HD 2 : 249.49 GB (172.23 GB free)
    USB Information: ℹ️
      Apple Inc. iPhone
      Apple, Inc. IR Receiver
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple, Inc. Keyboard Hub
      Apple Inc. Apple Keyboard
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Applications/DAEMON Tools Lite.app
      [not loaded] com.disc-soft.DAEMONTools.VirtualSCSIBus (1.0.2 - SDK 10.8) [Support]
      /Applications/TemperatureMonitor.app
      [not loaded] com.bresink.driver.BRESINKx86Monitoring (9.0) [Support]
      /Library/Application Support/VirtualBox
      [loaded] org.virtualbox.kext.VBoxDrv (4.3.10) [Support]
      [loaded] org.virtualbox.kext.VBoxNetAdp (4.3.10) [Support]
      [loaded] org.virtualbox.kext.VBoxNetFlt (4.3.10) [Support]
      [loaded] org.virtualbox.kext.VBoxUSB (4.3.10) [Support]
      /System/Library/Extensions
      [not loaded] com.novatelwireless.driver.3G (2.1) [Support]
      [not loaded] com.novatelwireless.driver.DisableAutoInstall (1.0.1) [Support]
      [loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.97) [Support]
      [not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.97) [Support]
      [not loaded] com.sierrawireless.driver.SierraSupport (1.4.0) [Support]
      [not loaded] com.sierrawireless.driver.SierraSupportKicker (1.4.0) [Support]
      [not loaded] com.smithmicro.driver.SMSIWirelessModem (3.2.6) [Support]
      [not loaded] net.pocketmac.driver.BlackberryUSB (3.0.11) [Support]
      [not loaded] net.pocketmac.driver.BlackberryUSBDev (3.0.11) [Support]
      /System/Library/Extensions/NovatelWireless3G.kext/Contents/PlugIns
      [not loaded] com.novatelwireless.driver.3GData (2.1) [Support]
      /System/Library/Extensions/SMSIWirelessModem.kext/Contents/PlugIns
      [not loaded] com.smithmicro.driver.SMSIWirelessCDC (3.2.6) [Support]
      [not loaded] com.smithmicro.driver.SMSIWirelessSerial (3.2.6) [Support]
    Launch Agents: ℹ️
      [loaded] com.google.keystone.agent.plist [Support]
      [loaded] com.oracle.java.Java-Updater.plist [Support]
      [running] com.rim.BBAlbumArtCacher.plist [Support]
      [running] com.rim.BBLaunchAgent.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [loaded] com.disc-soft.DAEMONTools.PrivilegedHelper.plist [Support]
      [loaded] com.google.keystone.daemon.plist [Support]
      [loaded] com.oracle.java.Helper-Tool.plist [Support]
      [loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
      [running] com.rim.BBDaemon.plist [Support]
      [not loaded] org.virtualbox.startup.plist [Support]
    User Launch Agents: ℹ️
      [invalid?] com.tencent.xin.WeChatHelper.plist [Support]
      [not loaded] org.virtualbox.vboxwebsrv.plist [Support]
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      uHD-Agent UNKNOWN (missing value)
      Google Drive Application (/Applications/Google Drive.app)
      MacFortHelper UNKNOWN (missing value)
    Internet Plug-ins: ℹ️
      FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
      QuickTime Plugin: Version: 7.7.3
      Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
      Default Browser: Version: 600 - SDK 10.10
      o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      JavaAppletPlugin: Version: Java 7 Update 67 Check version
    User internet Plug-ins: ℹ️
      BlueStacks Install Detector: Version: Unknown
      OctoshapeWeb: Version: 1.0 - SDK 10.8 [Support]
    Safari Extensions: ℹ️
      AdBlock
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
      Java  [Support]
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          5% WindowServer
          0% BBLaunchAgent
          0% AppleSpell
          0% fontd
          0% Google Drive
    Top Processes by Memory: ℹ️
      241 MB Safari
      172 MB mds_stores
      155 MB com.apple.WebKit.WebContent
      120 MB spindump
      103 MB Google Drive
    Virtual Memory Information: ℹ️
      11.13 GB Free RAM
      3.86 GB Active RAM
      998 MB Inactive RAM
      1.19 GB Wired RAM
      2.15 GB Page-ins
      0 B Page-outs
    Diagnostics Information: ℹ️
      Dec 13, 2014, 08:10:23 AM Self test - passed
      Dec 12, 2014, 03:44:20 AM com.apple.WebKit.WebContent_2014-12-12-0...diag [Details]
      Dec 11, 2014, 11:05:33 PM RimAlbumArtDaemon_2014-12-11-230533_Pauls-Mac-Mini.crash
      Dec 11, 2014, 11:05:23 PM RimAlbumArtDaemon_2014-12-11-230523_Pauls-Mac-Mini.crash
      Dec 11, 2014, 11:05:12 PM RimAlbumArtDaemon_2014-12-11-230512_Pauls-Mac-Mini.crash
      Dec 11, 2014, 11:05:02 PM RimAlbumArtDaemon_2014-12-11-230502_Pauls-Mac-Mini.crash
      Dec 11, 2014, 11:04:55 PM RimAlbumArtDaemon_2014-12-11-230455_Pauls-Mac-Mini.crash
      Dec 11, 2014, 11:04:42 PM RimAlbumArtDaemon_2014-12-11-230442_Pauls-Mac-Mini.crash
      Dec 11, 2014, 11:04:30 PM RimAlbumArtDaemon_2014-12-11-230430_Pauls-Mac-Mini.crash
      Dec 11, 2014, 11:04:20 PM RimAlbumArtDaemon_2014-12-11-230420_Pauls-Mac-Mini.crash
      Dec 11, 2014, 11:04:11 PM RimAlbumArtDaemon_2014-12-11-230411_Pauls-Mac-Mini.crash
      Dec 11, 2014, 11:04:06 PM RimAlbumArtDaemon_2014-12-11-230406_Pauls-Mac-Mini.crash
      Dec 11, 2014, 11:03:57 PM RimAlbumArtDaemon_2014-12-11-230357_Pauls-Mac-Mini.crash
      Dec 11, 2014, 10:10:37 AM RimAlbumArtDaemon_2014-12-11-101037_Pauls-Mac-Mini.crash
      Dec 11, 2014, 10:10:26 AM RimAlbumArtDaemon_2014-12-11-101026_Pauls-Mac-Mini.crash
      Dec 11, 2014, 10:10:16 AM RimAlbumArtDaemon_2014-12-11-101016_Pauls-Mac-Mini.crash
      Dec 11, 2014, 10:10:08 AM RimAlbumArtDaemon_2014-12-11-101008_Pauls-Mac-Mini.crash
      Dec 11, 2014, 10:09:59 AM RimAlbumArtDaemon_2014-12-11-100959_Pauls-Mac-Mini.crash
      Dec 11, 2014, 10:09:44 AM RimAlbumArtDaemon_2014-12-11-100944_Pauls-Mac-Mini.crash
      Dec 11, 2014, 10:09:34 AM RimAlbumArtDaemon_2014-12-11-100934_Pauls-Mac-Mini.crash
      Dec 11, 2014, 10:09:31 AM RimAlbumArtDaemon_2014-12-11-100931_Pauls-Mac-Mini.crash
      Dec 11, 2014, 09:53:22 AM SystemUIServer_2014-12-11-095322_Pauls-Mac-Mini.crash
      Dec 11, 2014, 09:03:41 AM discoveryd_2014-12-11-090341_Pauls-Mac-Mini.crash
      Dec 11, 2014, 09:02:02 AM discoveryd_2014-12-11-090202_Pauls-Mac-Mini.crash
      Dec 11, 2014, 09:00:58 AM RimAlbumArtDaemon_2014-12-11-090058_Pauls-Mac-Mini.crash
      Dec 10, 2014, 09:55:37 PM QuickTime Player_2014-12-10-215537_Pauls-Mac-Mini.crash

  • Wondering whether to get a mac mini starting at $599 or a mac-book air 11 inch.

    Hi I'm wondering whether to get a mac mini 2012 starting at $599 or the 11 inch macbook air (newest version as of this post. For about a year and a half I will use it for light gaming (minecraft) and miscellaneous web surfing (Youtube, and other teenage time wasters. NO MASTERBATION JOKES PLEASE) but in a year and a half I will need it for school projects, traveling, and video/photo editing since im heading off too college. This is a hard decision because it is my hard earned money and im spending only about 600-1000.

    I have both the Air and Mini, and 2 mac minis.  I honestly cant decide between either of them,...my Mac Mini is the best desktop I have ever owned, however its purpose is almost totally different from that of my AIR, which is for travel, etc.
    Since YOU are heading off to college and traveling, Id certainly get the AIR, between the two.
    Both have the HIGHEST used resale value of any other laptop / desktop.  Both are great choices.

  • Can I use Mac Mini with an S-video input?

    I'm considering a Mac Mini because I have a young child who is mostly blind, but is at the age where he needs to start learning to use a computer.  I want to go with Apple (I have been PC my whole life) because of the excellent VoiceOver features baked into the OS--- Windows doesn't have anything comparable.
    I'd like to wire this thing up to my HDTV, because my child does have some vision and the 52" screen will actually provide useful images to him; but it's a nearly 15 year old HDTV that does not have an HDMI input, just S-Video and RCA plugs.
    Is there an acceptable adapter out there that will allow me to use the Mac Mini with S-video or RCA plugs without having to buy a new 50+" TV just for the Mac Mini?

    I found this.
    http://www.ebay.com/itm/USB-PC-MAC-VGA-to-TV-Composite-S-Video-Adapter-NTSC-PAL- /260775797195
    You may be able to find others by more Googling
    You will also need a mini-display port to VGA adopter for the Mini. It plugs into the Thunderbolt port on the Mini

  • Mac Mini 1st Generation no video

    Hi,
    I have the following problem:
    I own a 2005 1st Generation Mac Mini (1.25Ghz 80GB 512MB). The problem is it won't show any video signal on my monitor which is connected via DVI and works perfect when connected to my other computer. When turning on the Mac Mini I can hear the startup chime and fan. The Indicator light on the front side is light up aswell and the optical drive is also working.
    There is no system on the harddrive. I took it out and formatted with my macbook, selected "Mac OS Extended (Journaled)" and "GUID Partition Table".
    I tried to insert the OSX Leopard Install DVD but it the screen is still off (Standby) when I turn the Mac on.
    Summary:
    The Mac Mini has a working:
    startup chime
    fan
    indicator light
    optical drive
    but
    no video
    no OS on the harddrive
    hope someone can help me.
    Thanks
    Ferdinand

    Try resetting the NVRAM
    About NVRAM and PRAM
    Note that a Power PC Mac like your Mini will only start if the disk is formatted in Apple Partition Map. Also, it will only start with OSX 10.5.8 or earlier.
    https://eshop.macsales.com/tech_center/index.cfm?page=HDDppcintelformat/HDDppcin telformat.html

  • New Mac Mini output to S-Video

    I'm trying to output to S-Video using a new Mac Mini (2010).
    If I use a Mini Display to DVI adapter and then the DVI to S-Video, will that work?
    Mini Display to DVI: http://store.apple.com/us/product/MB570Z/A
    DVI to S-Video: http://store.apple.com/us/product/M9267G/A
    Looks like it'll "work", but will it "WORK"?
    Thanks

    Adapters won't work. MDP to DVI is digital only and S-Video needs 480i (analog).
    You would need an expensive converter like http://www.gefen.com/kvm/dproduct.jsp?prod_id=5280

  • Mac Mini to Component/S-Video based HDTV

    Im thinking of getting a mac mini to connect to my TV. The TV i have only has component and s-video input. i read that the dvi-component converter that apple has is not good for display, only for movies and such. is there anyway i can get clear resolutions on the TV so that my TV can be the main moniter for my mac? IT doesnt have to be HD or anything, just clear enough for me to surf the web and use final cut and other apps.
    THanks

    You are just going to have to try and decide for yourself if it is clear enough for your purposes. Your only option is S-Video because the mini can't output a component compatible signal.

Maybe you are looking for

  • How to get the content of a DTD ?

    (i'm French, please excuse my English) I'm trying to get the content of the DTD corresponding to the file "fic" fic is like : "....../XXXXXX.xml" and contains : <!DOCTYPE composants SYSTEM "test.dtd"> Here is my code : org.w3c.dom.Document Doc = DBXM

  • What date 1. year warranty starts? 5 months gap between purchasing n activation

    Purchased iPod touch in May for Oct birthday.  iPod touch is not going to be opened until Oct.  But for one year warranty, it starts counting from purchasing Date or until Oct. Activating ?

  • Imessage wont send face time dosnt work

    my imessage wont send and my facetime wont work

  • Email form has template designer's email

    Hi I've been using some Muse templates and modifying them for my needs.  They've been working great but I'm getting an error regarding the email form.  Muse tells me that the email address of the person that designed the template does not match the s

  • Can only call webservice once

    I can only call a webservice once, after that I get the following error, it works fine on the 1st call. java.lang.NullPointerException      at weblogic.wsee.jaxws.JAXWSDeployedServlet.init(JAXWSDeployedServlet.java:45)      at javax.servlet.GenericSe