My mac mini will go back to sleep mode just after a Wake on WAN

Hi,
I am trying to find the correct setting in order to keep my mac mini woken up after sending a magic packet relayed by my router. My mac is connected via USB to a Drobo Mini which provides external storage capacity.
Basically what happens is the following :
- I wake up my mac via wakeonwan.fr for example
- I get access to my mac for 1 minute (tops)
- I loose access to my mac and I have to wake it up again (typically internal web server pages are not displayed anymore after 1mn)
Configured settings (in the energy saving panel) :
- Idle time before sleep : 15mn
- No HDD stop in case of inactivity
- Wake on LAN activated
In case I configure my mac not to sleep in the energy saving panel, everything works fine, but the goal here would be to save energy from my Mac + NAS and to preserve the use of the HDDs.
Would there be any monitoring commands / hidden threads that could help me know which process is forcing my mac to cut the WAN access / sleep without notice?
Thank you,
Sowdah

Hello Sowdah,
See if it's related to this...
It also seems to be related to later OSX versions, like 10.8.x & 10.9.x
The 2012 macs (and later apparently) (also later OSX versions on earlier Macs can do it also), not waking normally from sleep after hours being in sleep. (noted here ...
http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
"Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
About iMac sleep...
http://forums.macrumors.com/showthread.php?t=1529750
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip

Similar Messages

Mac mini didn't go into sleep mode when i am conect my thunderbolt display whit an optical thunderbolt cable

hello my mac mini didn't go into sleep mode when i am using an optical thunderbolt cable to my thunderbolt display
has any body els this problem

Hello josfromkerkade. Please contact me so that I can get more details.
We'd like to understand which monitor you're using, how old it is, which Thunderbolt port you're using (tethered cable or TB port), & the version of firmware.
[email protected]
Thanks, Mitch

HT1535 my iphone 5 will swithch back to automatic mode even after i applied manual management songs/videos, how to fix it?

my iphone 5 will swithch back to automatic mode even after i applied manual management songs/videos, how to fix it?

I have reset my phone a large number of times. It doesn't work. I am now reseting and setting it up as a new phone every 2 days. It works for a while and then teh cycle repeats.

Mac mini does not stay in sleep mode

Another sleep issue here: Mac mini (late 2012) will not remain in sleep mode since updating to OSX 10.8.5, I had no problem with 10.8.4. System log seems to indicate that the USB controller is sending a wake signal (lists all USB contoller ports as possible source). I have reset the NVRAM to no effect. Any suggestions how to proceed. I am not ready to update to Mavericks yet, which may or may not solve problem. I would like to sort this out if possible in 10.8.5.

Look down towards the bottom of > Why your Mac might not sleep or stay in sleep mode
Are a keyboard and mouse connected and working correctly?
Do you have any other external USB or FireWire devices connected? Try removing or disconnecting them one by one, when not in use, taking care to dismount any that are storage devices before disconnecting them.

My mac mini (2009) won't enter sleep mode

My mac mini won't enter sleep mode using the power button (previously did).
Preferences for this command have been checked - with no effect.

Try resetting the SMC
http://support.apple.com/kb/HT3964?viewlocale=en_US

TS1541 new mac mini. woke it up from sleep mode, user password suddenly not working. ideas?

After initial set up left the brand new mac mini for an hour or so. On return, the password that had been working thus far was entered but did not work. cannot now login to brand new mini. Ideas please?

Reset Password 10.7, 10.8...
http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/
Then Reset your Keychain...
http://support.apple.com/kb/TS1544

My Mac Mini will not read TDK disks from my iMac G3.

My Mac Mini will not read TDK disks from my iMac G3.
I used an iMac G3 (2001) -- the ones that looked like a big pod -- running on OS X and saved files to TDK CD-R, 700 MB disks, which worked fine. Now that I have a Mac Mini (model number A1347) I cannot get this computer to read those disks, made on the iMac G3. Once inserted each disk will open and I can retrieve files for a short period, then the problems start. The computer makes some noises, the beach-ball/pinwheel goes around and I cannot get the files to open or the disk to eject. After a while the disk does eject -- to my relief. I keep using Control+E until ejection happens.
My Mac Mini (2010-2011) is hooked up to a View Sonic HDMI LED monitor, an iOmega external hard-drive for backing up, an Epson Stylus C88 Plus printer and to the internet by a fibre 10MB feed. The Mac Mini runs on OS X version 10.6.8 Snow Leopard: Processor Speed:2.66 GHz
I took the Mac Mini to an Apple retailer and he hooked the computer up to one of his monitors and it read the TDK disks just fine. I am now using Sony CD-RW, 700 MB disks, but I would prefer to use my TDKs because I have such a large pile of blank ones to use and there are those TDK disks with information that I want to look at from time to time. Can anyone tell me what to do?
DJG

Try disconnecting everything attached to the Mini except the monitor.
If that doesn't work, try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later. If successful, copy the files to the original account Public/Dropbox.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode - About
Safe Mode

Just upgraded to OSX mavericks on macbook pro mid 2011 version. Having a big issue here that whenever my mac comes back from sleep, i.e after I open the lid, the screen flickers and there is an error of Finder not opening properly. Any fix to this?

Just upgraded to OSX 10.9 mavericks on macbook pro mid 2011 version. Having a big issue here that whenever my mac comes back from sleep, i.e after I open the lid, the screen flickers and there is an error of Finder not opening properly. Any fix to this?

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

My Mac Pro will not go to Sleep

My Mac Pro will not go to Sleep.
I have it set to 15 Mins in Energy Saver.
After 15 mins no sleep.

Alot of people have had the same problem including me. Here's a link to the thread reguarding this particular issue http://discussions.apple.com/thread.jspa?threadID=1847877&start=0&tstart=0.

My mac mini will not shut down. I need to manually shut it off with the power button.

My mac mini will not shut down or restart. I need to manually shut it off with the power button.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful.

How to take Mac Mini 10.5 back to factory setting and reinstallation

How to take Mac Mini 10.5 back to factory setting and reinstallation. I have printed off the instructions - followed U tube but still cant get the start up to bring up the recovery menu - anyone please give me ideas. I have just purchased new Mac Mini Yosemite and want to give the other to my grandaughter - wondered if it had something to do with my keyboard which is a Logitch Classic Keyboard 200 - assistance please.
many thanks

thank yo so much Niel - I do still have the original DVD's and tried restarting whilst holding down the C key - I assumed the windows key is the option one on the logitech keyboard - will give it another go - many thanks.

My mac mini won't back up to my Seagate external drive but can read the information on it. Can i back up to it at all?

My mac mini won't back up to my Seagate external drive but can read the information on it.
Can i back up to it at all? and how do i do it?
Simon

I suspect the Seagate is not formatted to be used with the Mac. The correct format would be Mac OS Extended (Journaled), if you just bought the EHD then almost certainly it's formatted to be used with MS Windows machines. This is easy to fix, here are instructions on how to format it:
http://pondini.org/OSX/DU1.html
After formatting Time Machine http://support.apple.com/kb/ht1427 will launch and will begin backing up. The first backup will take some time however after the first backup it will go pretty quickly.
NOTE!!!!!!!!!!!!!!! After formatting all data will be erased, so please if you have data on that move it to the internal HD first and then format. Then once you have backed up you will have a backup copy of the data. Also NEVER EVER use a backup disk to be used to store data. The reason being is if that drive crashes you have not only lost the data you have lost it's backup!!!!!!!!!!!!!!!

My mac mini will not let me log in. it says i can change my login info with my apple id. no good! help desk stumped! Help!

my new Mac Mini will not let me log in. I shut it down while away on vacation and now it will not accept my password. I tried to log in with my apple ID and it still would not accept it. I stumped the apple help desk. Help!

User Password Reset

My mac mini will not shutdown with either Mavericks or Yosemite (following a clean install)

First noted while running Mavericks, my Mac-Mini will not shutdown. It just hangs on a black screen with the little icon. I created a clean user account and the problem went away. Rather than do a fresh install of Mavericks, I waited until Yosemite came out. I reformatted the drive and did a fresh Yosemite install. I then restored my apps and data only to find the problem is still present. I've also tried stopping many of the applications I would normally expect might cause the problem with no luck. And I tried the one Yosemite suggestion regarding deleting the Library/Caches folder content with no luck.
My naive question: following the fresh install of Mavericks, should I have done a re-install of my (very many) applications instead of a restore from an image?
I've tried looking at the system logs after I've forced a shutdown with the power button but there's nothing I could find that shows any problems.
Any other suggestions of things to try would be appreciated.

Hi,
Thanks.
It is running 10.5.8.
I am trying to boot up an external drive with 10.5.8 on it. It works on my Macbook Pro which is running 10.5.8, runs on my IMAC running SL. But doesnt work on the mac mini?
It had been running SL, however there are a number of programs I have like Windows Live Sync which are not yet compatable with SL so i downgraded to 10.5.6 which came with the Mac Mini then loaded all updates.
It seems to just go into an auto reboot as soon as i click on it.
i thought it might be the firmware? Is it possible to downgrade them and then re-install?
I have reset the PRAM.
Any help would be appreciated.
Thanks

Help, my Mac mini will not start up, only keeps thinking on first page( white screen with apple emblem)

Help, my Mac mini will not start properly. Only goes to the white screen with thinking. Will not go to the password section

Are you sure about your hard disk health, any clicking noice recently?
Go to boot menu (press option button or button left to your space bar while booting) > Select Recovery drive > Disk utility > Verify the volume on which OS X is installed.

My mac mini will go back to sleep mode just after a Wake on WAN

Similar Messages

Maybe you are looking for