My mac mini won't read or load Turbo Tax 2012 cd.

My Mac mini will not read or load the CD for TurboTax 2012.  Any suggestions?

Just ran into this Turbo Tax 2012 requirement with a friend's 2008 iMac running 10.5.8. She only had 1GB memory in the iMac, which is the Snow Leopard minimum requirement.
After full install of 10.6.3, and (free) software updates, it was a 10.6.8 machine. With just the operating system running, there was 300 MB of the 1 GB memory remaining. Turbo Tax 2012 requires 512 MB of memory, and until the memory was upgraded on this machine, Turbo Tax was erratic due to limited memory. Upgraded to 4GB of memory and the both the iMac and Turbo Tax performance improved substantially.

Similar Messages

  • Mac Mini won't read my external drive

    Bought a Seagate 500GB external harddrive for my mac mini, and stored about 100GB of information in the harddrive. Now, the mini won't read the external harddrive. I am wondering if there is a way to retrieve it... Can someone help me? I don't think I can afford to loose 100GB of information.... Any help is greatly appreciated!

    Clearly it has worked previously since you have data on it, but you haven't indicated what model of Mac mini you have (which can make a difference in terms of troubleshooting steps) and what circumstances surrounded the 'disappearance' of the drive - particularly as Boece says, whether it was disconnected (or powered down) without being first ejected from the desktop.
    If the drive isn't being seen in the profiler, there is a possibility that the drive is not, in itself, faulty. A damaged cable, a faulty hub or a problem with the system's USB ports could be responsible. Since you don't give any detail about your system, it's hard to focus better on advising appropriate steps - however, if you are using a hub, remove it and connect the drive directly to the system, preferably using a different cable. If it mounts, then it was the cable or hub. If not, then open Disk Utility (in Applications>Utilities) and see if it appears in the drive list on the left.
    If there's no hub and the cable checks out OK, then you might next perform a PMU reset (if it's a G4 mini) or SMC reset (if it's an Intel).
    To reset the PMU for a G4 mini
    - Unplug all cables from the computer, including the power cord.
    - Wait 10 seconds.
    - Plug in the power cord while simultaneously pressing and holding the power button on the back of the computer.
    - Let go of the power button.
    - Press the power button once more to start up your Mac mini.
    To reset the SMC on an Intel mini:
    -From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
    -Unplug all cables from the computer, including the power cord and any display cables.
    -Wait at least 15 seconds.
    -Plug the power cord back in, making sure the power button is not being pressed at the time.
    -Then reconnect your keyboard and mouse to the computer.
    -Press the power button on the back to start up your computer.
    If those steps don't help resolve the problem, post back with more information.

  • Mac Mini won't read external hard drive

    Hello, I have an external Toshiba hard drive and my Mac Mini will not read it.  It was originally used on Windows.  I plugged the hard drive into my Macbook and it worked as a read-only device.  I can take stuff off of it but can not write stuff onto it on my Macbook.  I want to use it so I can back up files on my Mac Mini, but it will not read it.  I know I have to format it to make it writable with Mac, but I want to make it a read only device on my Mac Mini because I want to back up all the data already on it and my Mac Mini has 400gb of its hard drive available.  How can I get my Mac Mini to read the Hard Drive? 

    If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
    Check that the data cable is securely inserted at both ends.
    Try a different cable.
    If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
    If you're connecting it directly, try a different port.
    Disconnect all other devices on the bus, or as many as possible.
    Test the drive with another Mac. Test another drive with this Mac.
    If the drive is bus-powered, but has an AC adapter, connect the adapter.
    Boot into Recovery and launch Disk Utility. Is the drive recognized?
    Start up in Safe Mode and test.
    Reset the System Management Controller
    If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

  • My Mac mini won't read my SanDisk ultra MicroSDHC through the SD adapter.

    I have a SanDisk ultra 32gb MicroSDHC card that I use with my Galaxy S4, and which came with an SD adapter. The problem is that when I try to Plug the card, through the adapter, into the SD port on my mac mini it simply won't read. nothing shows up on my desktop or launchpad and also no windows pop up. Does anyone have any solutions? I have a late 2012 Mac mini running Maverick version 10.9.3.

    What is format of the card?
    Does it appear in Finder?
    Likely the format is not readable by the Mac
    Open Disk Utility and see if it is listed there

  • Mac Mini won't read CDs

    Hi, my Mac Mini has suddenly stopped reading CDs. When I put a CD into the slot, it just spits it out. This happens with any CD. Any ideas?

    What year mini?
    For 2005-2008, see: http://eshop.macsales.com/shop/mac-mini/superdrive/
    Installation instructions: http://www.ifixit.com/Guide/Repair/Installing-Mac-mini-Model-A1176-Optical-Drive /1105/1
    For 2009 see: http://www.logicsupply.com/search?searchstring=panasonic&search_indescription=on&x=0&y=0&page=1
    Installation instructions: http://www.ifixit.com/Guide/Repair/Installing-Mac-mini-Model-A1283-Optical-Drive -Replacement/1065/1

  • My mac mini won't read discs.

    My macmini has stopped reading any discs.
    They go in but just make a whirring noise. It tales a while to eject the disc. I have tried cleaning it with a DVD cleaning disc but it would not read either!!!!!

    Apple Computers: Troubleshooting the slot-loading SuperDrive
    Mine does the same thing on my 2009 Mini and I have not got it to work.I consider it just failed/. That happens not infrequently

  • My mac mini won't back up to my Seagate external drive but can read the information on it. Can i back up to it at all?

    My mac mini won't back up to my Seagate external drive but can read the information on it.
    Can i back up to it at all? and how do i do it?
    Simon

    I suspect the Seagate is not formatted to be used with the Mac. The correct format would be Mac OS Extended (Journaled), if you just bought the EHD then almost certainly it's formatted to be used with MS Windows machines. This is easy to fix, here are instructions on how to format it:
    http://pondini.org/OSX/DU1.html
    After formatting Time Machine http://support.apple.com/kb/ht1427 will launch and will begin backing up. The first backup will take some time however after the first backup it will go pretty quickly.
    NOTE!!!!!!!!!!!!!!! After formatting all data will be erased, so please if you have data on that move it to the internal HD first and then format. Then once you have backed up you will have a backup copy of the data. Also NEVER EVER use a backup disk to be used to store data. The reason being is if that drive crashes you have not only lost the data you have lost it's backup!!!!!!!!!!!!!!!

  • Mac mini won't boot anymore

    My Mac mini won't boot anymore. It's been running fine for months.
    It's running Leopard Server 10.5.2 Build 9C31
    It starts to boot, I get the first spinning gear with the gray screen, then the blue desktop blinks, then a second spinning gear on a gray screen and it appears to hang (the gear stops spinning).
    I booted off the install DVD, ran disk utility, repaired the HD, repaired the permissions: the behavior is the same.
    Safe mode doesn't work (same hang as above).
    Single user mode does work.
    I can connect to it via Server Admin while it appears hung.
    The last few lines of the system log are:
    May 15 18:38:58 server emond[67]: SetUpLogs: uid = 0 gid = 0
    May 15 18:38:58 server emond[67]: SetUpLogs: opening /Library/Logs/EventMonitor/EventMonitor.error.log
    May 15 18:38:59 server kextd[23]: writing kernel link data to /var/run/mach.sym
    May 15 18:39:09 server KernelEventAgent[59]: tid 00000000 received unknown event (12)
    May 15 18:39:20 server kernel[0]: display: Not usable
    May 15 18:39:20 server com.apple.KerberosAutoConfig[126]: Kerberos configuration is up to date
    May 15 18:39:20 server com.apple.ATSServer[125]: FODBCheck: New annex file created
    May 15 18:39:21 server ARDAgent [130]: ******ARDAgent Launched******
    May 15 18:39:21 server com.apple.KerberosAutoConfig[132]: Kerberos configuration is up to date
    May 15 18:39:22 server ARDAgent [130]: call logout from LoginLogoutProxyCallBackFunction
    May 15 18:39:22 server com.apple.launchd[1] (com.apple.RemoteDesktop.agent): Throttling respawn: Will start in 9 seconds
    May 15 18:39:24 server loginwindow[58]: Login Window Started Security Agent
    May 15 18:39:29 server servermgrd[53]: servermgr_calendar: created default calendar virtual host
    May 15 18:39:31 server ARDAgent [146]: ******ARDAgent Launched******
    May 15 18:39:32 server ARDAgent [146]: ******ARDAgent Ready******
    May 15 18:39:33 server mdworker[109]: (Error) SyncInfo: Boot-cache avoidance timed out!
    May 15 18:39:54 server Python[47]: CGImageSourceCreateWithData data parameter is nil
    May 15 18:39:54 server com.apple.wikid[47]: Thu May 15 18:39:54 server.jeff.carpenter.name Python[47] <Error>: CGImageSourceCreateWithData data parameter is nil\n
    May 15 18:39:56 server kernel[0]: AppleYukon2 - bad packet received. length: 1440, packet status bits: MII error
    May 15 18:39:56 server kernel[0]: AppleYukon2: 00000000,00000001 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
    May 15 18:49:54 server kernel[0]: serialnumberd 194 FSWRITEDATA SBF /dev/dtracehelper 13 (seatbelt)
    May 15 18:49:54 server kernel[0]: serialnumberd 194 FSREADDATA SBF /dev/autofs_nowait 13 (seatbelt)
    May 15 18:49:54 server kernel[0]: serialnumberd 194 FSREADDATA SBF /usr/sbin 13 (seatbelt)
    May 15 18:55:12 server kernel[0]: AppleYukon2 - bad packet received. length: 23, packet status bits: MII error
    Any ideas?

    Yes, it's been running Server since I purchased it.
    I doubt the serial number is in use elsewhere: I purchased the 10-user version at a retail store in a sealed package and I've only installed it once.

  • Mac Mini won't boot up.

    Mac Mini won't boot up! Just getting blank white screen, any ideas why? No apple, just a blank screen. It worked fine last night.

    Have you tried booting into the Recovery HD by pressing/holding COMMAND+R at system start or the Option/Alt key and choosing Recovery HD to boot into?
    If you can get into the Recovery HD, open Disk Utilities and Verify Disk. Repair if necessary.

  • Mac Mini won't start and constantly makes disc ejecting noise

    My Mac Mini won't start. It was working fine, then just locked up and won't start again. When I push the start button it just makes this repeated disc ejecting noise from the DVD drive. It doesn't make the chime noise or display anything on the monitor. I've disconnected the optical drive, but it didn't help. Then it just doesn't start at all. I thought that if I would disconnect the optical drive, that it would ignore it and just boot off the hard drive, but nothing happened. The power light comes on. Then, if I hold down the power button for 10 seconds it shuts down. The fan operates. It just never attempts to boot up. I can't put in a system DVD because the optical drive is just in eternal eject mode.
    If you have any suggestions let me know. Thanks.

    I have the same situation.
    I think the drive thinks it has a disc to eject or part of the mechanism is stuck and can't return to it's resting position. I was going to disconnect as you tried but now I think I'll try to disassemble the drive to see if there might be some debris jamming things up.
    Please let me know if you solve the problem.

  • Mac Mini won't start after installing OS X 10.6.3

    My Mac Mini won't start after installing Mac OS X Snow Leopard 10.6.3. When I turn it on, the Apple logo appears and the initialization line starts to fill, but it suddenly stops. It does that again and stops at the same point, but this time it shuts down. What should I do?

    If you are coming from 10.5.8, hopefully you backed up your important data first. Your mini will need at minimum, 1 GB of RAM to install Snow Leopard and at least 5 GB of storage remaining on your boot drive.
    I treat 10.6.3 as a fresh, full install over a 10.5.8 system. That means I choose Disk Utility from the Installer's menu and repartition the boot drive as a single partition, Mac OS X Extended (Journaled) format, and use the GUID partition scheme from the options button. At this point, while still in Disk Utility, I would verify the drive under First Aid.
    Then I turn the installer loose, and reboot into a working 10.6.3 system, ready for the software updates that take the machine to 10.6.8.
    So, following the above guidelines, reinstall 10.6.3.

  • My Mac mini won't recognize photo library in itunes so I can download pics from library and free up space in memory, I was able to download camera role but not photo library that takes up more space.

    My Mac mini won't recognize iphone 4 photo library in itunes so I can download pics from library and free up space in memory, I was able to download camera role but not photo library that takes up more space. Help thanks

    The photo sync is one-way: Computer to phone. Photos synced to your phone will have to be extracted from your phone using third-party software, if you want them on your computer, as Apple makes no provision to do so. Since you're using a Mac, you can use this:
    http://www.ecamm.com/mac/phoneview/

  • My Mac Mini won't get past the initial startup screen with the Apple logo. What can I do?

    After a long distance move, my Mac Mini won't startup past the logo screen. What can I do?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
         a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, boot from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.   
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • Mac mini won't start up.  Grey screen with apple just freezes.

    Mac mini won't start up. just get a grey screen with the apple and it freezes.  Please help.

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there to Repair the Disk, then Repair Permissions.

  • Mac mini won't connect to printer unless other mac on network turned on

    mac mini won't connect to printer unless other mac on network turned on

    Copy the IP address of the printer from the Mac that can connect to it by itself. The IP shows when you start any print job.
    Disable Printer sharing on this Mac.
    Go to the Mac that cannot connect by itself and set up the printer from scratch using the printer's IP. To do this:
    System Preferences / Print & Scan, then click the + sign, nxt select Add Printer or Scanner and click on IP. Fill in the info.

Maybe you are looking for