My mac mini work slow

MY MAC MINI WORK SLOW

Go to the Application folder then utilities folder.
Open "Activity monitor"
Check you have enough free ram
Check if one process is taking a high % of processor ressources
As BGreg wrote, check free disk space
Your mac may be busy something like indexing your disk (mdworker process or similar)
or some badly designed application may be "eating" your ram free space
... and please use small characters, caps are kept for "shouting"
Thanks

Similar Messages

  • Macs or mac mini work with blu ray external drives even XL DISC CAPACITIES

    macs or mac mini work with blu ray external drives (BURNERS) even XL DISC CAPACITIES like 128GB?

    https://discussions.apple.com/docs/DOC-2881

  • Can mac mini work connected to imac desktop

    can mac mini work connected to imac desktop. I know its silly question but can i make the mac mini main operating system on my imac after transferring all of my itunes etc?

    What is Target Display mode?
    But only 27" iMac (Late 2009 or Mid 2010) can do this.
    Since you mentioned an Early 2009 iMac I assume that it is a 24" iMac which sadly has not this capability.
    If I am correct, you might wanna have a look at ScreenRecycler http://www.screenrecycler.com/ScreenRecycler.html
    Stefan

  • Mac mini works extremely slow

    Hi
    I have Mac mini that works extremely slow,
    it starts to load the OS but turns really slow once the login is done, it takes about 30-40 min to load.
    i did few tests like permissions verify and fix, then verify and repair disk which said that Macintosh HD is OK.
    What should I do next? Its sounds like hardware issue - for my opinion its the HDD but I can't understand why when I use the Restore mode the computer works fast so maybe its OS issue related? Should I reinstall OSX?
    what do you recommend for me as a Mac newbie user
    thanks a lot

    The boot drive is failing, or you have some other hardware fault.
    Back up all data immediately, then make a "Genius" appointment at an Apple Store to have the machine tested.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the recovery partition, if present.
    *An SSD doesn't need to be zeroed.

  • Mac Mini extremely slow - Superdrive not working

    I have a 2006 Mac Mini that has the following issues:
    -cannot keep a wireless connection w/Airport (PC's in the house do)
    -will not recognize dvds/cds nor will it write them
    -slows to snail pace when running more than 1 application at a time
    My brother suggested using the installs discs to whipe the mac clean because it would get rid of any virus/worm that might be on there.
    My question is: Will upgrading from Tiger to Leopard whipe everything anyway, in addition to losing every file on my mac? Also, if I do have a virus/worm then what is the best protection for Macs?
    I'm almost ready to give up and go back to Windows. I'm so frustrated with my mac!

    Hi airheadial, and a warm welcome to the forums!
    hpr3 gives some good advice to start with.
    How much Memory do you have? How full is the Hard Drive?
    It's not likely you have a Virus infection.
    You could upgrade to Leopard without losing any files, but I don't think it'll cure the problem, especially difficult with no Superdrive!

  • ITunes downloads fast on old Mac mini but slow on brand new Macbook Pro on the same WiFi network?

    Hi all,
    I have an old Mac mini that's from around 2008 and runs on Snow Leopard. I also have a brand new Macbook Pro with retina display that's running Mountain Lion. Both running iTunes 10.6.3.
    I never noticed anything wrong with my MBP's connection speed until last night when I downloaded a free TV episode from iTunes. The download speed varied between 20KB/s and 40KB/s and it took me 7 to 8 hours to download a single episode. I checked my internet connection but there was nothing wrong with it, SpeedTest.net told me I had a download speed of 94MB/s and upload speed of 80MB/s, it was only iTunes that was unbearably slow.
    Today I was browsing iTunes again and was planning to buy some movies, but again it took forever for the trailers to download. So I fired up my Mac mini just to see if it would be just as slow. Turned out my Mac mini could download the same trailers from iTunes at a much higher speed than my MBP (around 3MB/s on the ones I tested).
    So what gives? They are on the same Wifi network provided by an Airport Extreme, and although my iPhone and iPad are also connected to it, no one else is doing any heavy duty downloading.
    Thanks in advance!
    Keywords: iTunes download speed, slow iTunes downloads, different connection speeds on different Macs, slow iTunes connection, iTunes takes a long time to download

    It's possible the DNS setting your ISP is using are interfering. Although your PC works OK Macs can be sensitive to DNS settings. Here is a MacWorld DNS Troubleshooting article that explains the issue and below is how to fix it.
    1. System preferences
    2. Network
    3. Click Advanced
    4. Click DNS tab
    5. Click + sign
    6. Add 208.67.222.222
    7. Click + sign
    8. Add 208.67.220.220
    9. Click OK.
    10. Exit System Preferences
    11. Try out your MBP and report what happened.
    Roger

  • Mac mini running slow after downloading yosemite

    Problem description:
    Mac mini slow to login and use internet since upgrading to yosemite, repeatedly displays rotating rainbow wheel when using many apps. (mac mini 2011, 2,3GHz intel core i5, 2GB 1333 MHz DDR3
    EtreCheck version: 2.0.11 (98)
    Report generated 23 November 2014 11:58:47 GMT
    Hardware Information: ℹ️
      Mac mini (Mid 2011) (Verified)
      Mac mini - model: Macmini5,1
      1 2.3 GHz Intel Core i5 CPU: 2-core
      2 GB RAM Upgradeable
      BANK 0/DIMM0
      1 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      1 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 288 MB
      DELL E171FPb 1024 x 768 @ 75 Hz
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 1:40:35
    Disk Information: ℹ️
      Hitachi HTS547550A9E384 disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 499.25 GB (399.58 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
      Seagate FreeAgent GoFlex 1 TB
      S.M.A.R.T. Status: Verified
      EFI (disk1s1) <not mounted> : 210 MB
      Untitled (disk1s2) /Volumes/Untitled : 999.86 GB (883.32 GB free)
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Logitech USB-PS/2 Optical Mouse
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [not loaded] com.seagate.driver.PowSecDriverCore (5.0.1) Support
      /System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.0.1) Support
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.0.1) Support
      [not loaded] com.seagate.driver.SeagateDriveIcons (5.0.1) Support
    Problem System Launch Agents: ℹ️
      [loaded] com.paragon.NTFS.auth.plist Support
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
      [running] com.seagate.SeagateStorageGauge.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [failed] com.crashplan.engine.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.genieo.completer.download.plist Support
      [loaded] com.genieo.completer.ltvbit.plist Support
      [loaded] com.genieo.completer.update.plist Support
      [loaded] com.google.keystone.agent.plist Support
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      AdobeResourceSynchronizer Application (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
      Kodak EasyShare Wireless Listener Application (/Applications/Kodak EasyShare.app/Contents/MacOS/Kodak EasyShare Wireless Listener.app)
    Internet Plug-ins: ℹ️
      OVSHelper: Version: 1.1 Support
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 2.4.0.11 Support
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
      FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
      DivXBrowserPlugin: Version: 2.1 Support
      Silverlight: Version: 4.0.60531.0 Support
      Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.1.0 Support
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
      JavaAppletPlugin: Version: Java 7 Update 51 Check version
    Safari Extensions: ℹ️
      Omnibar
      DivX Plus Web Player HTML5 <video>
    3rd Party Preference Panes: ℹ️
      DivX  Support
      Flash Player  Support
      Flip4Mac WMV  Support
      Java  Support
      Paragon NTFS for Mac ® OS X  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: OFF
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 499.25 GB Disk used: 99.67 GB
      Destinations:
      Untitled [Local]
      Total size: 999.86 GB
      Total number of backups: 22
      Oldest backup: 2014-11-03 10:43:39 +0000
      Last backup: 2014-11-23 11:52:32 +0000
      Size of backup disk: Adequate
      Backup size 999.86 GB > (Disk used 99.67 GB X 3)
    Top Processes by CPU: ℹ️
          17% storedownloadd
          3% WindowServer
          0% AppleSpell
          0% storeassetd
          0% fontd
    Top Processes by Memory: ℹ️
      122 MB softwareupdated
      67 MB Mail
      44 MB mds
      43 MB mds_stores
      34 MB WindowServer
    Virtual Memory Information: ℹ️
      49 MB Free RAM
      550 MB Active RAM
      524 MB Inactive RAM
      745 MB Wired RAM
      6.50 GB Page-ins
      206 MB Page-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Mac Mini running slow after Mavericks

    Hi All
    I have a Mac Mini which I upgraded to Mavericks and now it intermittently runs extremely slow - almost at a standstill. I have tried a number of things, such as a complete OSX re-install; I've used MacKeeper to tidy up my junk; I have installed Time Machine Scheduler to stop constant back-ups; I have tested the machine when the Iomega Time Machine drive is unconnected and my 2TB external archive drive is unattached too; I have removed Flashplayer programmes, Silver light etc etc. But nothing is helping (I have not tried uninstalling Microsoft Office, yet!).
    I is a busy working machine and I am now having to resort to using my Mac Air because things are so bad.
    Weirdly, my wife's identical Mac Mini (with Mavericks) has none of these problems.
    Here is my report from EtreCheck.... PLEASE CAN SOMEONE HELP AS I GOING CRAZY!!!
    Thanks
    Keith
    Hardware Information:
        Mac mini (Mid 2010)
        Mac mini - model: Macmini4,1
        1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
        4 GB RAM
    Video Information:
        NVIDIA GeForce 320M - VRAM: 256 MB
    System Software:
        OS X 10.9.2 (13C64) - Uptime: 0 days 0:29:13
    Disk Information:
        TOSHIBA MK3255GSXF disk0 : (320.07 GB)
            EFI (disk0s1) <not mounted>: 209.7 MB
            Macintosh HD (disk0s2) / [Startup]: 319.21 GB (216.75 GB free)
        HL-DT-STDVDRW  GA32N 
    USB Information:
        Apple, Inc. Keyboard Hub
            Mitsumi Electric Apple Optical USB Mouse
            Apple Inc. Apple Keyboard
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Computer, Inc. IR Receiver
    FireWire Information:
    Thunderbolt Information:
    Kernel Extensions:
        [kext loaded]    com.rim.driver.BlackBerryUSBDriverInt (0.0.64) Support
        [not loaded]    com.rim.driver.BlackBerryUSBDriverVSP (0.0.64) Support
        [kext loaded]    net.kromtech.kext.AVKauth (2.3.6 - SDK 10.8) Support
        [kext loaded]    net.kromtech.kext.Firewall (2.3.6 - SDK 10.8) Support
    Launch Daemons:
        [loaded]    com.adobe.fpsaud.plist Support
        [loaded]    com.microsoft.office.licensing.helper.plist Support
        [running]    com.rim.BBDaemon.plist Support
        [running]    com.zeobit.MacKeeper.AntiVirus.plist Support
        [running]    com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist Support
    User Launch Agents:
        [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
        [loaded]    com.google.keystone.agent.plist Support
        [running]    com.zeobit.MacKeeper.Helper.plist Support
    User Login Items:
        None
    Internet Plug-ins:
        JavaAppletPlugin: Version: Java 7 Update 51 Mismatch! Oracle recommends Java 7 Update 55
        FlashPlayer-10.6: Version: 13.0.0.201 - SDK 10.6 Support
        Default Browser: Version: 537 - SDK 10.9
        AdobePDFViewerNPAPI: Version: 11.0.01 - SDK 10.6 Support
        AdobePDFViewer: Version: 11.0.01 - SDK 10.6 Support
        Flash Player: Version: 13.0.0.201 - SDK 10.6 Support
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 Support
        Google Earth Web Plug-in: Version: 6.1 Support
        Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
        iPhotoPhotocast: Version: 7.0
    Safari Extensions:
        Torrenthandler: Version: 1.0
    Audio Plug-ins:
        BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
        AirPlay: Version: 2.0 - SDK 10.9
        AppleAVBAudio: Version: 203.2 - SDK 10.9
        iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
        Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins:
        RealPlayer Plugin: Version: (null) Support
        Picasa: Version: 1.0 Support
        Google Earth Web Plug-in: Version: 7.1 Support
    3rd Party Preference Panes:
        Flash Player  Support
        Growl  Support
        Paragon NTFS for Mac ® OS X  Support
    Time Machine:
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: NO - Auto backup turned off
        Volumes being backed up:
            Macintosh HD: Disk size: 297.29 GB Disk used: 95.43 GB
        Destinations:
            Iomega_HDD [Local] (Last used)
            Total size: 465.64 GB
            Total number of backups: 86
            Oldest backup: 2012-01-15 18:54:59 +0000
            Last backup: 2014-04-22 16:07:48 +0000
            Size of backup disk: Adequate
                Backup size 465.64 GB > (Disk used 95.43 GB X 3)
        Time Machine details may not be accurate.
        All volumes being backed up may not be listed.
    Top Processes by CPU:
             5%    mds_stores
             4%    mds
             2%    WindowServer
             0%    AntiVirus
             0%    firefox
    Top Processes by Memory:
        233 MB    AntiVirus
        184 MB    firefox
        139 MB    MacKeeper Helper
        94 MB    com.apple.IconServicesAgent
        76 MB    mds_stores
    Virtual Memory Information:
        1.52 GB    Free RAM
        1.22 GB    Active RAM
        577 MB    Inactive RAM
        449 MB    Wired RAM
        246 MB    Page-ins
        0 B    Page-outs

    velvetpic wrote:
    I've used MacKeeper to tidy up my junk; I have installed Time Machine Scheduler to stop constant back-ups;
    That's your first two mistakes. Get rid of MacKeeper. It is of no benefit, and is arguably detrimental.
    Secondly, Time Machine backups only backup what has changed in the last hour. They should not be "constant", but even if they are, the speed at which the backup is made is irrelevant.
    Get rid of the Kromtech thing, whatever that is, too.
    Two things to test:
    1. Does it work in Safeboot Mode? If so, then it's likely some third-party software that you normally have running.
    2. Does it work in a brand new user account? If so, then your problem is a corrupt preference or cache in your old user account, or some user-triggered process. Go back to the old account and start refining your hunt. Remove a bunch of preference files and test; empty user caches with a utility like Onyx; turn off Login Items, etc.

  • Mac mini running slow, will disk utility in machine be effective

    Mac mini came installed with 10.4 when purchase long time ago. Looks like the dvd reader no longer works since any cd or dvd gets ejected. The mini has been running slow and I cannot restart with Mac Install DVD to run the Disk Utility since it gets ejected. Will the Disk Utility that is found in machines Utilities be just as good for repairing compared to the Install DVD? Current OS is 10.6.8.

    Try it. Some disk repair requires booting from other than the disk being repaired.

  • Mac mini was slow, better

    My mac mini had started running slow. I tried repairing permissions, reinstalling software from scratch to no avail.
    So I reset the mini by unplugging the power cord, holding the power button down then pressing again.
    Immediately a puff of dust spewed out of the mini and the fan came on full speed.
    I have never heard the fan on before ever.
    Now it won't go off but it seems a bit more responsive.
    Should the fan have been on all along for light task such as web surfing.

    The fan should run all the time the system is powered, but typically slowly enough that you can barely hear it. When CPU load is high and the temperature inside the unit begins to rise, the fan should then spin up until it reaches a speed where it is very noticeable. It should generally NOT run at full speed when web browsing, though if there is flash content or heavy graphics embedded in a page, you may hear the fan spin up for what ought to be fairly brief intervals.
    You don't say which model of mini you have, but the reset procedure you appear to be describing sounds like the PMU reset for the G4 mini. If so, it doesn't work on Intel models.
    If it's a G4, follow these instructions:
    - Unplug all cables from the computer, including the power cord.
    - Wait 10 seconds.
    - Plug in the power cord while simultaneously pressing and holding the power button on the back of the computer.
    - Let go of the power button.
    - Press the power button once more to start up your Mac mini.
    If it's an Intel model, follow these:
    -From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
    -Unplug all cables from the computer, including the power cord and any display cables.
    -Wait at least 15 seconds.
    -Plug the power cord back in, making sure the power button is not being pressed at the time.
    -Then reconnect your keyboard and mouse to the computer.
    -Press the power button on the back to start up your computer.
    After you do whichever is the appropriate reset the system is still misbehaving, and noting that you've done what sounds like a full reinstall of MacOS, let us know if you did an erase and install or an archive and install, and also whether the fan runs at full speed all the time (very loud, from power-on) and whether you have had the system open at any point.

  • Mac Mini very slow at 4 gig memory, upgrade to 16 still slows down but takes a longer time

    I bought a Mac mini a year ago. With an i7 and i terabyte and it cam with only 4 gig of ram. It worked fine for a while and i installed some apps then it started to get very slow. seeing the colorful "hourglass " turn round and round quite a few times. Then i went to the activity monitor where it told me that the memory used was about 3.89 gigs. I purchased a memory cleaner app from thr app store which helped a bit.
    Today i upgraded to 16 gig memory and bang my computer ripped. The activity manager said i was using 6 gigs of ram and had 9.8 remaining.
    after being on the internet for a couple of hours and using Firefox with about ten tabs open the computer started to get very slow again.
    I checked the activity manager and it read 6 gigs used and the cash read a whopping 9 gigs. Did not think i would need the memory cleaner any more but after doing a clean it worked better.
    Why did i get a whopping 9 gigs in the cash ? which is what it read after my computer slowed down again.

    You may want to post in the Mac Mini forum, this is the iMac forum. If you would like me to I will ask the moderator to move the thread.

  • Why is my mac mini so slow?

    Hello everybody.
    I recently bought a mac mini 1.66 Ghz Intel Duo Core with 1gb Ram, OSX 10.4.6.
    I installed it with all the softwares that I need for my work and that used to work perfectly well on my 1ghz G4: Adobe CS2, Fontlab, FireFox, Font Explorer. I frequently work with 4-5 simultaneouly running apps (one or two big like indesign and illustrator and 2 or 3 smaller ones like ichat, font explorer and Itunes), but it seems to slow down the computer a lot especially when it comes to switching frome one app to another. My old G4 used to be quite quicker.
    Is there anything I can do to fix that or is it normal? Is it going to change with upcoming updates of the OS?

    None of Adobe's applications are recompiled for Intel processors, meaning they will run under the Rosetta emulation layer. This will result in significantly slower performance, even compared to an old G4. As of now, there is nothing you can do about this until Adobe releases Univeral Binaries for their software. As for the other applications you use, you need to make sure the versions you have are indeed Universal Binaries. Firefox is now a Universal Binary, but I don't know about Fontlab/Font Explorer. But my guess is that you're running all your software as PowerPC under Rosetta - that's why your computer is so slow.

  • Everything on mac mini works OK but the internet

    Hello,
    Prior to upgrading from Snow Leopard 10.6.8 I was having problems with the internet.  After upgrading to Mavericks 10.9.5 it settled down for a couple weeks and it is now worse than before.  All my Applications work OK with no problems of slowness or erratic behavior.  When I have checked my wifi signal it has five bars, clicking on "alt and the wifi signal" at the same time I see the transmit rate will vary from five to 115, mostly five.
    I have tried using Network preferences to establish that wifi is working OK, which it says it does, sometimes the wifi will go off for about a few seconds.  Internet pages take anything from two minutes to 10 minutes to load, sometime it will say "problem loading ? page".  At this point I am not sure what the problem is, furthermore, at first, I thought it might have been Safari, I have since installed latest Firefox and it still behaves the same.  I should be very pleased if someone would point me in the right direction before I go to Apple. 
    My Macbook Pro with has the same operating system, same software and it works perfectly, this makes me suspicious of the Mac Mini Airport.
    Thank you and Kind regards
    rachealfromva

    Try reseting the SMC and PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM
    Try fresh install of the OS to see if corruption could be the problem.
    Have you taken the Mini apart?
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Why is my mac mini running slow after downloading Yosemite?

    My mac mini is running significantly slower after downloading Yosemite and I am wondering if it is to better to try to go back to an older operating system or if Apple is working on a fix for this.
    Here is what I am Running it on:
    Model Name: Mac mModel Identifier: Macmini3,1
                                        Processor Name Processor Name: Intel Core 2 Duo
                                       Processor Speed: 2.26 GHz
                                        Number of Processors: 1
                                        Total Number of Cores: 2
                                           L2 Cache: 3 MB
                                            Memory: 2 GB
                                            Bus Speed: 1.07 GHz
                                           Boot ROM Version: MM31.00AD.B00
                                            SMC Version (system): 1.35f1
                                               Hardware UUID: 2DF68C91-A8F8-536A-87EF-14DDEF6FAB32

    I thought I had gotten rid of the HP shortcut manager and can no longer find it but when I re ran my Test it is still there. Were could it be hiding that I can not find it now?
    EtreCheck version: 2.0.10 (97)
    Report generated November 1, 2014 at 10:39:40 PM CDT
    Hardware Information: ℹ️
      Mac mini (Late 2009) (Verified)
      Mac mini - model: Macmini3,1
      1 2.26 GHz Intel Core 2 Duo CPU: 2-core
      2 GB RAM Upgradeable
      BANK 0/DIMM0
      1 GB DDR3 1067 MHz ok
      BANK 1/DIMM0
      1 GB DDR3 1067 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      NVIDIA GeForce 9400 - VRAM: 256 MB
      Panasonic-TV spdisplays_720p
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 3 days 6:35:47
    Disk Information: ℹ️
      FUJITSU MHZ2160BH G1 disk0 : (160.04 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 159.18 GB (71.82 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      OPTIARC DVD RW AD-5670S 
    USB Information: ℹ️
      Sunplus Technology Co.,Ltd. USB to Serial-ATA bridge 1 TB
      S.M.A.R.T. Status: Verified
      EFI (disk2s1) <not mounted> : 210 MB
      ROCSTAR BACKUP (disk2s2) /Volumes/ROCSTAR BACKUP : 999.86 GB (848.90 GB free)
      Eastman Kodak Company ESP Office 6100 Series AiO
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
    Firewire Information: ℹ️
      0x30F0 ATA Device 00 800mbit - 800mbit max
      S.M.A.R.T. Status: Verified
      EFI (disk1s1) <not mounted> : 210 MB
      Time Machine (disk1s2) /Volumes/Time Machine : 145.52 GB (42.09 GB free)
      Main Drive 2 (disk1s3) /Volumes/Main Drive 2 : 854.21 GB (699.03 GB free)
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Problem System Launch Agents: ℹ️
      [failed] com.apple.CallHistoryPluginHelper.plist
      [failed] com.apple.CallHistorySyncHelper.plist
      [failed] com.apple.cmfsyncagent.plist
      [failed] com.apple.coreservices.appleid.authentication.plist
      [failed] com.apple.EscrowSecurityAlert.plist
      [failed] com.apple.sbd.plist
      [failed] com.apple.scopedbookmarkagent.xpc.plist
      [failed] com.apple.telephonyutilities.callservicesd.plist
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.AssetCacheLocatorService.plist
      [failed] com.apple.awdd.plist
      [failed] com.apple.ctkd.plist
      [failed] com.apple.diagnosticd.plist
      [failed] com.apple.icloud.findmydeviced.plist
      [failed] com.apple.ifdreader.plist
      [failed] com.apple.installd.plist
      [failed] com.apple.nehelper.plist
      [failed] com.apple.periodic-daily.plist
      [failed] com.apple.periodic-weekly.plist
      [failed] com.apple.softwareupdate_download_service.plist
      [failed] com.apple.softwareupdated.plist
      [failed] com.apple.tccd.system.plist
      [failed] com.apple.wdhelper.plist
    Launch Agents: ℹ️
      [loaded] com.coupons.coupond.plist Support
      [loaded] com.hp.help.tocgenerator.plist Support
      [running] com.kodak.BonjourAgent.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [running] com.backblaze.bzserv.plist Support
      [running] com.google.keystone.daemon.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
    User Launch Agents: ℹ️
      [running] com.backblaze.bzbmenu.plist Support
      [invalid?] com.google.GoogleContactSyncAgent.plist Support
      [loaded] com.kodak.KODAK AiO Firmware Updater.plist Support
      [loaded] com.kodak.KODAK AiO Software Updater.plist Support
      [running] com.kodak.StatisticCollection.plist Support
    User Login Items: ℹ️
      iTunesHelper UNKNOWNHidden (missing value)
      HPShortcutManager Application (/Library/Application Support/Hewlett-Packard/HP Scanjet Scanner/HPShortcutManager.app)
      Google Chrome ApplicationHidden (/Users/[redacted]/Desktop/Google Chrome.app)
      Alfred Application (/Applications/Alfred.app)
      Printer Pro Desktop Application (/Applications/Printer Pro Desktop.app)
      Google Software Update Application (/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/Contents/Reso urces/GoogleSoftwareUpdateAgent.app)
      HPShortcutManager Application (/Library/Application Support/Hewlett-Packard/HP Scanjet Scanner/HPShortcutManager.app)
      HPShortcutManagerStartup Application (/Library/Application Support/Hewlett-Packard/HP Scanjet Scanner/HPShortcutManagerStartup.app)
      HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
    Internet Plug-ins: ℹ️
      DirectorShockwave: Version: 11.5.9r620 Support
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
      Google Earth Plugin: Version: 5.1 Support
      RealPlayer Plugin: Version: (null) Support
      Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      iPhotoPhotocast: Version: 7.0
      AdobePDFViewer: Version: Unknown
      CouponPrinter-FireFox_v2: Version: 5.0.3 - SDK 10.6 Support
      Photo Center Plugin: Version: Photo Center Plugin 1.1.2.2 Support
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
    User Internet Plug-ins: ℹ️
      Move_Media_Player: Version: npmnqmp 07103007 Support
      fbplugin_1_0_1: Version: (null) Support
      fbplugin_1_0_3: Version: (null) Support
    3rd Party Preference Panes: ℹ️
      Backblaze Backup  Support
      Flash Player  Support
      Flip4Mac WMV  Support
      Java  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: OFF
      Auto backup: NO - Auto backup turned off
      Volumes being backed up:
      Macintosh HD: Disk size: 159.18 GB Disk used: 87.36 GB
      Destinations:
      Main Drive [Local]
      Total size: 999.86 GB
      Total number of backups: 2
      Oldest backup: 2013-04-03 01:58:20 +0000
      Last backup: 2013-05-15 17:53:48 +0000
      Size of backup disk: Excellent
      Backup size 999.86 GB > (Disk size 159.18 GB X 3)
    Top Processes by CPU: ℹ️
          99% HPShortcutManager
          7% WindowServer
          0% coreduetd
          0% bzserv
          0% AppleSpell
    Top Processes by Memory: ℹ️
      60 MB Mail
      34 MB WindowServer
      28 MB Google Chrome
      28 MB Safari
      26 MB mds
    Virtual Memory Information: ℹ️
      116 MB Free RAM
      360 MB Active RAM
      362 MB Inactive RAM
      514 MB Wired RAM
      82.08 GB Page-ins
      1.99 GB Page-outs

  • 2011 Mac Mini running slow

    ASC:
    I have tried everything I can find on the web, as well as everything that I can think of, to try and fix my issues currently happening with my Mac Mini 2011. Anymore, it can take up to thirty-seconds for application to open. I also have unresponsive applications and severe lag to the point of where I can hear the hard-drive constantly revving whereas it used to not. Again, I have tried everything: reinstalled applications, deleted cache, repaired Permissions, etc. My Mac Mini used to run great, and I know it still should. Please someone assist me.
    -will

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. It will be slow, but application launches should not take as long as you say they do.
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Maybe you are looking for

  • User Exit to stop the creation of PO

    Dear All, I have a typical problem , we have 2 servers both running on ECC 6.0. I tried creating a PO and I kept a break point in the exit EXIT_SAPMM06E_013 (INCLUDE ZXM06U44 ) in server1 and the control stops here and I can check all the values from

  • How can I tell if my software licence is a Family Pack or Single use?

    I need to work out which licence I have as my daughter has a Mac Book.  Her school provided her with iWork but take it off when she leaves in a month or so.  If I have the Family Pack I can load Pages, Keynote etc, but not if I only have Single use.

  • SOAP Sender Channel _Error in handling SOAP Envelope message

    Hi XI/PI Experts : Scenario : SOAP (SOAP Envelope) to RFC (SAP ERP) Partners send the information   Goods Receipt  in SOAP envelope webservice  . SOAP Sender removes the SOAP enevlope, inturn sends only the xml  in XI /PI: <GoodsReceipt xmlns="rrn:or

  • RE: Cost centre is not updating in FAGLFLEXT table

    Dear experts, During posting we give PSG and cost centre but cost centre is not updating in GL total table FAGLFLEXT as its statistical, in order to be able to update CC in the GL total table what we should activate? please advice. Regards, Chandu.

  • Xav601bt allow multiple sources

    Hi i was wondering if a firmware change would be possible to allow multiple sources to be enabled. Was wanting to use mirrorlink and the radio or ipod at the same time