My Mac only works on the mains

Hello,
i have a problem my macbook only works when it's connected to the mains. when i click on the battery icon it says battery is not charging and when i push the button on the battery i get five green lights.
in the system profiler it says:
Charge Information:
Charge remaining (mAh): 0
Fully charged: Yes
Charging: No
Full charge capacity (mAh): 0
Health Information:
Cycle count: 198
Condition: Check Battery
Battery Installed: Yes
Amperage (mA): -1
Voltage (mV): 10423
Do i need to replace the battery or is there something wrong with my setup. Need help can't live with my mac on mains power when i'm using it.
would be gratefully for any help?
Thanks

I also have this problem - as of about half an hour ago, only my battery info is as follows:
+Battery Information:+
+Model Information:+
+Serial Number: DP-ASMB013-34e1-2d5f+
+Manufacturer: DP+
+Device name: ASMB013+
+Pack Lot Code: 0001+
+PCB Lot Code: 0000+
+Firmware Version: 0102+
+Hardware Revision: 0300+
+Cell Revision: 0200+
+Charge Information:+
+Charge remaining (mAh): 5169+
+Fully charged: Yes+
+Charging: No+
+Full charge capacity (mAh): 5286+
+Health Information:+
+Cycle count: 399+
+Condition: Good+
+Battery Installed: Yes+
+Amperage (mA): 0+
+Voltage (mV): 12499+
I intend to try a few things like resetting PRAM and PMU and I'll post back with results soon.

Similar Messages

Blackberry Curve 8530 track pad only works on the main screen

I have a blackberry curve 8530 and the track pad will only work on the main screen. I have removed the battery and let it sit for 2 minutes before re-installing it again, the track pad started working but only for about 30 seconds and it back to the same thing.
Any suggestion?
Thanks You

Suggest that you get your handset serviced by an expert this will solve your problem..

I have itunes on a mac with 2 users but the library only shows on the main user how can both users have the same library?

i have itunes on a mac with 2 users but the library only shows on the main user how can both users have the same library?

Hi,
Have a Look at these Links on Home Sharing:
http://support.apple.com/kb/HT4620
http://support.apple.com/kb/HT3819
Could be what you need...
Cheers,

Is it true that Mountain Lion will only work on the latest (within the last 3 years) Macs?

I have read somewhere that the developers version of Mountain Lion would only work on the latest Macs and I was wondering whether the soon to be released version will be the same.

They have published this list of compatible machines.

I would like to run a stock analysis program called Toolkit 6 on my Macbook Pro, but it only works on the Windows platform. Is there software that allows me to run Windows applications on the Mac?

I would like to run a stock analysis program called Toolkit 6 on my Macbook Pro, but it only works on the Windows platform. Is there software that allows me to run Windows applications on the Mac?

Yes it's MS Windows! You will need a license of MS Windows (preferable Windows 7) and from there you can decide on the strategy for running Windows on your iMac. You can use Boot Camp (you already have this) or you use virtualization software such as Parallels or Fusion. For your situation I'd recommend virtualization software. However for only one program I'd do some due diligence to see if there is a OS X version. You can start with the App store or simply use Google to search.
Kappy has provided a good article on running Windows on a Mac and the various options. Here is the link:
Kappy's explanation
Roger

I have a mac pro 1.1. the main hard drive failed. How do I reload OS X 10.7 back in my computer. the app store will not let me reinstall this os. My computer is not compatible OS x 10.8?

I have a mac pro 1.1. the main hard drive failed. How do I reload OS X 10.7 back in my computer. the app store will not let me reinstall this os. My computer is not compatible OS x 10.8?

You need to first install the OS your Mac came on the bundled gray disks. Assuming it's Snow Leopard, you could then login into the App Store using your same Apple ID and password to download and install Lion.
If your Mac is a bit older and came with Leopard, 10.5.x, you can bypass that and install Snow Leopard from your retail disk. The only software you'd need to install separately from the gray disks would be the optional software, such as the iLife suite and other titles not included on the retail SL disk.

My ipod wont play music solely through the ear phones it will only play through the main speaker and quietly through earphones. Is this fixable??

My ipod wont play music solely through ear phones it will only play through the main speaker and the earphones together. Is this able to be fixed??

I am also experiencing some problems with the new software version, I bought the Belkin TuneBase for my car 25 days ago it had been working fine since I upgraded my Ipod 2 days ago, you know that sometimes if you don't get good reception you can change to a diferent preseted station on this Belkin Transmitter but since this Ipod upgrade I can't change to a diferent station and also i can't disconect it like before because before it said you were ok to disconect and I'm afraid to return because perhaps afterall is a software problem.

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

I don't know what's wrong with my camara it's all black and the front only works not the back

I don't know what's wrong with my camara it's all black and the front only works not the back

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

Hi, I'm making hyperlinks. They work for the main page of the webpage, but when I'm trying to redirect the hyperlink to a "sub page" of the webpage it is still going to the main page. (allthough I'm pasting the complete url address)

Hi, I'm making hyperlinks. They work for the main page of the webpage, but when I'm trying to redirect the hyperlink to a "sub page" of the webpage it is still going to the main page. (allthough I'm pasting the complete url address)

Hi! first of all, thank you so much for your help.
I don't know about that panel you are talking about.
what I do is RIGHT CLICK, INTERACTIVE, NEW HYPERLINK, and a window pops up, where I paste the address (images).
Where says URL I paste the complete address that the "sub page" gives me.
Is that correct? (for the main page of the wabepage works correctly)
thanks!!!

Flash Player only works for the account that downloaded it

I downloaded flash player and did not specify any special preferences, however, it doesn't work for the 2 other accounts on the computer. It only runs for the Administrator account from which i downloaded it. I'm running XP professional. Can someone tell me how to fix this?

hi, i had already deleted cookies, temp internet files, etc;
i only have the IE pop up blocker and blocking level set at Medium;
it's the latest version of FP 10.0.45.2.
I installed this version a couple of weeks ago and it worked ok for all accounts (the other 2 accounts are not admin) for a week. Then, it stopped working for all accounts, i reinstalled it (some trial and error involved), then when it finally reinstalled, only works for the one account. i just tried to reinstall from one of the other accounts and error mssg said "failed to register"
Date: Sun, 6 Jun 2010 11:20:59 -0600
From: [email protected]
To: [email protected]
Subject: Flash Player only works for the account that downloaded it
Hi ol, I would go to Tools, click on Internet Options and clear the Temp files. Delete Cookies, Delete Files, including the off line content. I would do this using all accounts. Also check the history files while you are there and delete those also unless you have done so recently.
What version of Flash Player do you have Installed?
Do you use any adblock or pop up blocker software?
Thanks,
eidnolb
>

I purchased a new vehicle with a USP port but my nano model A199 will not work, only works with the aux plug which will not allow me to view the songs on the vehicle touchscreen. Is there a download I can get to put into this nano?

I purchased a new vehicle and the older ipod nano I have will not work through the USP port, only works through the aux plug. Is there a download i can get toput into the nano that will then allow me to use the USP port instead of the aux port?

Check with your dealer and see if there is a special cable available for connecting your iPod. It should have a dock connector on one end and USB and miniplug on the other.

Including image in SharePoint survey answer and hiding elements only work on the first page

Hi All,
I would like to add some text/remove some text etc on a sharepoint survey page.
Which i have done using jquery/jscript.
But unfortunately it only works on the first page.
Any ideas how i can get it to work on all the pages?
See a sample here on how you can add the scripts:
http://sharepointkings.blogspot.com.au/2011/05/include-image-in-sharepoint-survey.html
Cheers

Hi Patrick, does the first page use the same ASPX file as the other pages? If not, you will need to add your jquery/jscript to the other page as well.
Dimitri Ayrapetov (MCSE: SharePoint)

The CustomDatumExample.java only works if the Employee object has 2 attributes.

The CustomDatumExample.java only works
if the Employee object has 2 attributes -
(EmpName and EmpNo). If I try to add
another attribute to the Employee object I get java.lang.ArrayIndexOutOfBoundsException: 2 on the getAttr3 method.
Anyone know why? Thanks.
Employee object
CREATE TYPE employee AS OBJECT
(empname VARCHAR2(50), empno INTEGER,
attr3 VARCHAR2(50));
Custom object class
public class Employee implements CustomDatum, CustomDatumFactory
public static final String SQLNAME = "EMPLOYEE";
public static final int SQLTYPECODE = OracleTypes.STRUCT;
MutableStruct _struct;
static int[] _sqlType =
12, 4
static CustomDatumFactory[] _factory = new CustomDatumFactory[3];
static final Employee _EmployeeFactory = new Employee();
public static CustomDatumFactory getFactory()
return _EmployeeFactory;
/* constructor */
public Employee()
struct = new MutableStruct(new Object[3], sqlType, _factory);
/* CustomDatum interface */
public Datum toDatum(OracleConnection c) throws SQLException
return struct.toDatum(c, SQL_NAME);
/* CustomDatumFactory interface */
public CustomDatum create(Datum d, int sqlType) throws SQLException
if (d == null) return null;
Employee o = new Employee();
o._struct = new MutableStruct((STRUCT) d, sqlType, factory);
return o;
/* accessor methods */
public String getEmpname() throws SQLException
{ return (String) _struct.getAttribute(0); }
public void setEmpname(String empname) throws SQLException
{ _struct.setAttribute(0, empname); }
public Integer getEmpno() throws SQLException
{ return (Integer) _struct.getAttribute(1); }
public void setEmpno(Integer empno) throws SQLException
{ _struct.setAttribute(1, empno); }
public String getAttr3() throws SQLException
{ return (String) _struct.getAttribute(2); }
public void setAttr3(String attr3) throws SQLException
{ _struct.setAttribute(2, attr3); }
}

You also need to add an appropriate element to the _sqlType array.
In practice, it is easiest to have JPublisher regenerate the CustomDatum class when you have changed your object type definition:
jpub -user=scott/tiger -sql=EMPLOYEE:Employee

I have a touchscreen laptop running Windows 8.1. Is it possible to use the touchscreen with Firefox? I've installed Firefox but it only works with the mouse etc

have a touchscreen laptop running Windows 8.1. Is it possible to use the touchscreen with Firefox? I've installed Firefox but it only works with the mouse etc

Hello Sirving575, sorry but the metro version of firefox has been cancelled, see : https://blog.mozilla.org/futurereleases/2014/03/14/metro/
thank you

My Mac only works on the mains

Similar Messages

Maybe you are looking for