My Mac OS X 10.7.5 won't update to Mavericks. help please

When i try to update on the appstore, it just says uneligable for update check requirements and i clicked on it and check to see if i was eligable and i am eligable for the update, so im just truing to figure out how to update from 10.7.5 lions to mavericks

Perhaps this will help:
http://support.apple.com/kb/HT4670

Similar Messages

  • HT4623 I updated my phone to ios7 and it told me to connect to iTunes. When I did the phone said it needed to be restored. I did this and then iTunes said it can't be as it isn't eligible so now my phone won't turn on. Help please!

    I updated my phone to ios7 and it told me to connect to iTunes. When I did the phone said it needed to be restored. I did this and then iTunes said it can't be as it isn't eligible so now my phone won't turn on. Help please!

    You can try to restore it via recovery mode as show in the link below:
    http://support.apple.com/kb/ht1808

  • My Creative Cloud wont show the Apps, it says download Error contact support. And on the Home Menu on the creative cloud for MAC desktop it just loads and loads and never stops. Help please!!

    My Creative Cloud wont show the Apps, it says download Error contact support. And on the Home Menu on the creative cloud for MAC desktop it just loads and loads and never stops. Help please!!

    Hypesuh I would recommend reviewing both Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html and Creative Cloud app doesn't open and hangs on spinning progress wheel - http://helpx.adobe.com/creative-cloud/kb/creative-cloud-app-doesnt-open.html as it appears both documents are applicable towards the difficulties which you are currently facing.

  • I just upgraded to Yosemite. Now when I try to open Excel, I get a message that there's not enough memory.  When I check the storage under "about this Mac" it says I have 150 GB of 249 GB.  Help please.  Thanks

    I just upgraded to Yosemite. Now when I try to open one particular document in Excel, I get a message that there's not enough memory.  I can open other documents.  The document I can't get to is the spreadsheet of my passwords.  Go figure.  When I check the storage under "about this Mac" it says I have 150 GB of 249 GB.  I have a MacBook Air.  Help please.  Thanks, Connie

    I just upgraded to Yosemite. Now when I try to open one particular document in Excel, I get a message that there's not enough memory.  I can open other documents.  The document I can't get to is the spreadsheet of my passwords.  Go figure.  When I check the storage under "about this Mac" it says I have 150 GB of 249 GB.  I have a MacBook Air.  Help please.  Thanks, Connie

  • Won't connect to internet, help please

    I am back in my apartment at school and they replaced the cable with just another one, almost the same thing, but the problem is that when i connect the cable straight to my CPU it works fine, but when i plug the cable into my airport express it just blinks amber and it shows the connection and even says i am connected but it won't connect to the internet, please help me. my brother will be here tomorrow and i need to get this wireless setup. thanks so much for the help.

    Connect the modem to your Airport Express. Then pull power to both for at least five minutes. Then plug power into the modem and wait a minute. Then plug power into the Airport Express and wait a minute. Then try internet access again.

  • Iphone 4 won't turn on! Help Please!

    my iphone4 suddenly turned off, now  it won't turn on. connected it to itunes on laptop. tried to restore it but still stuck with "Waiting for iPhone" and an apple logo with a blank progress bar. Help please!

    i just finished charging my phone then i disconnected it from the charger and then right after that moments after it just crashed and screen went black. so probably you're right, it might be the battery of the software may have crashed.

  • IMovie, IPhoto won't update after Mavericks upgrade from OSX 10.06

    Upgraded to Mavericks, iMovie won't update, says, "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." And then I get a null error.
    However, I am using the only apple ID I have to sign in to the app store.

    You can update for free to version 9.5.1 in the App store
    LN

  • Ipod won't update...help?

    Hi I dunno what's wrong with my ipod I mean I 've put in new songs in the iTunes but it won't update into my ipod. When I connect it to the computer it just keeps on charging and nothin else I can't even find it as an F drive in my computer??!!!!
    Please help

    See these.
    USB drivers are not installed properly or are out of date.
    iTunes 7 doesn't recognize the iPod.
    Your Windows PC doesn't recognize iPod</font color</a>.
    iPod appears in Windows Explorer but does not appear in iTunes.
    iPod does not appear in iTunes.
    Fast user switching in Windows XP is not supported.
    Windows confuses iPod with network drive

  • I have changed my password on my iPhone but now my iPad won't allow me to lo in to anything or update...help please

    I have changed my password on my iPhone but now my iPad won't allow me to lo in to anything or update...help please

    Apple ID: “This Apple ID has been disabled for security reasons” alert appears
    http://support.apple.com/kb/ts2446
    Contact Apple Support
    https://expresslane.apple.com/GetproductgroupList.action
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Look at this post https://discussions.apple.com/thread/5767569?tstart=60
     Cheers, Tom

  • Mac OS X 10.4.11 won't update to latest software.

    When i check for software updates, it indicates that there are no latest software updates, and that mine is up to date.
    why won't it let me update to a newer version?
    please help!

    You have to understand the difference between an Update and an Upgrade.
    An Update is a free change to add to the base code or as a bug fix within an existing Operating System. Such as the .11 added to 10.4.
    An Upgrade is a complete new Operating System that must be purchased. Such as 10.5 Leopard to 10.6 Snow Leopard.
    10.5 Leopard was written for Power PC Macs with code added to allow it to run on Intel MacBooks processors.
    10.6 Snow Leopard has completely rewritten code and only runs on Intel Macs.
    10.7 Lion used some 32 bit which allows it to run on Late 2006 through Early 2008 MacBooks and a lot of 64 bit code.
    10.8 Mountain Lion is pure 64 bit, which excludes more systems than Lion did. It can only run on the Late 2008 through Mid 2010 MacBooks. It's not something you can add memory to, for example, as it involves the base architecture.
    The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. You will need to be running 10.6.8 to access the App Store to order Lion or Mountain Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    System Requirements for 10.6:
    Mac computer with an Intel processor
    1GB of memory
    5GB of available disk space
    DVD drive for installation
      Some features require a compatible internet service provider: fees may apply.
    You can upgrade from 10.4 straight to 10.6 with no problems as long as you have at least 1gb of RAM. Any program that runs under 10.4 should run under10.6. See this list for third party programs compatibility with 10.6: http://snowleopard.wikidot.com/  You might have to upgrade some drivers for printers, etc.... And you will have to install Rosetta if you have any Power PC applications 
    http://www.macobserver.com/tmo/article/snow_leopard_installing_rosetta/  
    I recently upgraded an older MacBook (Early 2006 model 1,1) straight from 10.4 to 10.6.
      A retail 10.5 Leopard disk will run you over $200

  • My mac book keep on beeping and make the beep sound 3 time (same goes to the light) and it won't start up. Help please.

    My mac book keep on beeping and make the beep sound 3 time (same goes to the light) and it won't start up. What should i do?

    If you recently installed new ram, make sure it is seated properly.
    If that doesn't work try removing one stick at a time to see if one is dead or put original ram back in.

  • Mac OS X  10.6.6 won't update to 10.6.7

    Hey, all. I'm trying to update my MacBook Pro from 10.6.6 to 10.6.7, and it's not letting me do so. The update isn't showing up in the Software Update list, and when I try to run the installers manually it comes up saying "Mac OSX Update can't be installed on this disk. This volume does not meet the requirements for this update." For those interested, this is a mid/late 2010 15" MacBook Pro, model identifier MacBookPro6,2 (4GB of RAM, 500GB hard drive, 2.66 GHz Intel Core i7). It's currently running OSX 10.6.6 build 10J3210. I'm not really sure what to do, but any help would be appreciated. Thanks!

    Hi,
    that's exactly what I do: I have ONE source image for all my installation. If a new version of machine is approaching (here: MacBook Pro Early 2011) I update the image to the new machine (here built 10J3210) and create a new updated image from the newest machine - this was working in the past without problems.
    It's no problem for me, to create a completely new image, which works. But than I have to manually transfer all personal data from the machines.
    So I am still searching for an intelligent method to get 10.6.6 built 10J3210 updated to 10.6.7 on a NON MacBook Pro Early 2011...
    Is there any trick to avoid the updater to check the hardware of the machine?
    I think of modifing the "special updater for MBP early 2011 10.6.6. to 10.6.7" to an other model?
    http://support.apple.com/kb/DL1368?viewlocale=en_US

  • My mini mac with osx 10.8.1 won't update to 10.8.2

    I hit update but nothing happens.. Restarted my mini mac and tried again..  Hit update and nothing happens..

    So after restarting 3 times it now will update to 10.8.2  all fixed. 

  • My i mac won't update to maverick

    I am running OSX 10.7.5 - I have tried to up date to both Mountain Lion & Maverick. The app appears in launchpad - then states "Waiting". Then freezes.
    Any ideas?

    Apple changed the behavior of the Power button in 10.9 Mavericks.
    Press the button once, and it puts your display to sleep. Press and hold it for a second or two, and the Shutdown / Restart / Sleep dialog appears. Press and hold it for even longer, and your Mac gets completely powered off.

  • Mac Air OS X 10.9 won't update to OS X 10.9.1

    Help! It doesn't make sense as I have OS X v10.9.

    I did. In my download file, it shows all of the times I've attempted to download adobe. I double clicked on one of them, it opened the file that says "Install Adobe Flash Player". Tried it once again, still didn't work.

Maybe you are looking for

  • How do I export a small section of a large complex illustrator graphic?

    I have a large complex map in an illustrator file and I need to export smaller sections of the map for other uses. When I use artboards, the files still retain ALL of the information. I just want the portion that is on the artboard and I want it as a

  • Album Art- Automatically get

    One of the main reasons I bought my iPod was becuase of the support for album art. So far, it has only shown album art on the songs that I bought from iTunes. How do I set it up so every album on my iPod will have the album art inlcluded with it, so

  • Error Message "Device Error - Sense Code (6 28 00)"

    Trying to burn a project made up of MP4 video files (about 2 1/2 hrs in length) and when it reaches about 97%, I receive this message "Device Error - Sense Code (6 28 00) - Not ready to ready change, Medium" and then Premiere elements 9 procedes to b

  • Creating a Simple Excel Report from Final Cut Server

    1. Modify the following Metadata Group (ASSETLISTVIEW) to contain the field you want to output in your report 2. Create Ruby file. In this example I named mine searchallassets.rb Be sure to make the file executable, using the following command at the

  • G580 external USB 2 and 3 hub connection

    G580 Windows 8 64bit I am unable to connect either USB2 or USB3 external hubs either powered or not to the notebook. The USB2 is locked out by windows and the USB3 crashes the system until removed. Intel driver update states that all Intel drivers ar