My Mac pro Autofill icon comes on but not functional?
How can I get AutoFill towork on Mac pro?
Try power down and doing an smc reset:
Intel-based Macs: Resetting the System Management Controller (SMC)
Similar Messages
-
Mac Pro will connect to internet but not network with other systems
I have an iMac in my studio reception and a Mac pro and Macbook in my office. All three systems can connect to the internet but the Mac Pro has stopped networking with the iMac. However the iMac can network with the Pro. I have an ethernet cable connection to the Pro (no wi fi card) and I have a wireless router on the iMac which has enabled me to connect the Pro to other systems through wi fi. I also have a PC laptop and the Pro can connect to it via wi fi. Everything was networking properly several weeks ago and as far as I am aware I have not changed any settings. Does anyone have any suggestions on how to resolve this annoying little problem.
Hello there, WoodenToy.
The following Knowledge Base article offers extensive troubleshooting steps for troubleshooting your issue:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Although the entire article is a great resource you may want to focus on the section entitled: "Symptom: My Mac does not connect to the Internet".
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
My Mac Pro will read thumb-drive but not CF card reader
Can someone help me resolve this problem?
I just erased everything off my Mac Pro and reconfigured everything (as new). I installed all my programs, primarily Aperture3 and Photoshop CS5
(using Leopard).
I had NO problem uploaded some photos into Aperture3 from a thumb drive using the USB port, BUT,
when I tried to upload photos from my card reader the MacPro does not recognize the card reader using the same USB port.
I figured the problem was a bad card reader, so I tested it on my PC and it recognized the card reader and uploaded all the photos.
Also, the card reader's green light turns on when attached to the MacPro, as if it is working and connected but it does not register in Finder or desktop to indicate that the card reader is installed.
I even tried to upload directly from my Canon 7D and it also did NOT recognize the camera.
Why would the MacPro recognize the thumb drive on the same USB port and not the card reader or the camera?
Please help!Try power down and doing an smc reset:
Intel-based Macs: Resetting the System Management Controller (SMC) -
Before partition by Boot Camp on Mac Book Pro With Mac OS Lion the computer restarts but not open wizard of Windows 7 install and appears the apple with question mark...don't recognize disk..
Apparently Zoo Tycoon can't be played on anything newer than 10.7.
https://discussions.apple.com/message/21885910#21885910
Roller Coaster Tycoon is available for purchase from the App Store. -
my autofill stopped working recently. I looked under preferences and all the necessary boxes are checked. When I start to fill out a form, the autofill box comes up, but when I click on it, it turns blue and nothing else happens.
Back up all data, then test after each of the following steps that you haven't already tried. Stop when the problem is resolved.
1. Press the down-arrow key. (Credit to ASC member iNeight.)
2. Quit and relaunch Safari. Force quit if necessary.
3. Click in the first field to be filled, and then select
Edit ▹ AutoFill Form
from the menu bar. You may have to reload the page in order to do this.
4. Select
Contacts ▹ Preferences ▹ vCard
and uncheck the box marked
Enable private me card
if it's checked.
5. Select your card in Contacts. Then select
Card ▹ Make This My Card
from the menu bar.
6. In Safari, select
Safari ▹ Preferences ▹ AutoFill ▹ AutoFill web forms: Using info from my Contacts card
If the box was already checked, uncheck it and then check it again.
7. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.
8. Run Software Update and install any available updates. -
Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen with no sound and no picture. Does anyone know what is wrong?
l have an apple tv 2 generation please help meWelcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
I am trying to upload photos onto e.bay from i photo. When I click choose file the I photo icon comes up but when i select it, instead of taking me in to the photo library it just downloads the iPhoto icon ! Help
Export copies of the photo(s) from iphoto onto your desktop and use that to upload to ebay
-
Pages is not responding, the icon comes up but the program will not open????
Pages is not responding, the icon comes up but the program will not open????
You have to give us some more information or do a search in the forum for answers on the same matter.
-
how can i force eject a cd from mac pro no icon on desktop or in finder, how can i force eject a cd from mac pro no icon on desktop or in finder
Restart the computer and hold down the trackpad down.
It will take a while. -
21 September, 2014, from India.
MD513AE/A iPad Wi-Fi-16GB White - Model A 1458
I have purchase this from Dubai, UAE, some 2 years back.
I am NOT able to switch it on; when connected to power supply, the battery icon comes in but no signs of charging.
After some times the ‘Apple’ icon comes in. Tried simultaneous operation of Sleep and Power buttons, but of no use.
Sometimes a picture of cable and ITunes comes in; but not able to connect to
P C as there is no battery charge.Hi madhu254,
Thank you for visiting Apple Support Communities.
If your iPhone is not charging, please check out this article.
iPhone and iPod touch: Charging the battery
There's a Resolving issues section, but you may want to read it all.
Best regards,
Nubz -
have AOL on my Mac pro.I can receive Mail but cannot forward/send if I hit send, the message goes to my outbox
Sorry Mate, I tried your suggestion ,but no joy.I now have 3 messages in my outbox,that will not send.
Thank you for trying to help.
Ken. -
when i double click the main button, the open icons come up but no minus
You have to tap and hold them until they jiggle to see the minus sign.
-
4s stuck in recovery mode. try to restore apple icon comes up but goes itno recovery again. Itunes does not recognise. I wa trying to update software from laptop to phone and errored 4005.
Hi there Schusski,
I would recommend taking a look at the troubleshooting steps for Error 4005 found in the article below.
iOS: Restore errors 4005, 4013, and 4014
-Griff W. -
hello there
I have Mac Pro I broced the screen but it still under apple care so I just want to know if they going to fix the secreen or change hole the Mac Pro?Mac Pros are towers and have no monitor. A MBP does have a screen, but unless the screen damage was a manufacturing defect, Apple will not cover the damage under your warranty. But they will fix it at your expense.
-
I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?
The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.
Maybe you are looking for
-
I can't get Firefox 6 on my desktop to sync with Firefox 6 on my Android.
When I go to sync on my desktop, it says I already have an account, and it gives me three sets of letters and tells me to go to my other device and hit "add device." When I click on Connect under sync, and it gives me another three sets of letters an
-
Reg BAPI_SALESORDER_CREATEFROMDAT2
Hi All, We are creating the sales order using the BAPI BAPI_SALESORDER_CREATEFROMDAT2 the BAPI is successfully creating Sales order successfully with out any issues,but the problem is the sales order line item which has been created through BAPI is b
-
Set up MAC Address Filtering on WRT54G - now nothing connects
I set up MAC address filtering on the wireless router. Added 5 MAC addresses to the PERMITTED list, by selecting them from the available devices. Saved the changes. Now, none of the machines can connect to the access point. That includes the PC
-
Step results not appearing in report
Hello. New to TestStand. I've creted a String Value Test that compares the UUT Serial number using RunState.Root.Locals.UUT.SerialNumber. However, when the report is generated I see no step results. This is only happening with this sequence and not w
-
Authorizations for adhoc query
Hi all, I am facing a problem with authorization on adhoc query. The following is what I am trying to achieve: Power Users are able to design a query but they are only allowed to save the query with the prefix "p_" In PFCG I have set this up in s_rs_