My mac pro became very slow

suddenly my mac pro and the imac started to get very slow. it take's up to 10 seconds to show what is inside a folder
can anyone please give me some help?
thx

A system disk drive needs 10GB or more of free space, at least 10% free (20% minimum recommended). You can end up losing files, a corrupt directory (or even no directory at all if it were to try to update or write to the directory and can't)
Your 8GB of RAM (memory) is separate, the system will page out to disk if it thinks it needs more memory or to free some memory pages - and it can't.
I try to keep the system boot drive to 50% free and use a fast drive.
Try cloning the system to a new drive for one.
Don't use the system as it is.
Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner 
http://www.bombich.com/software/updates/ccc-3.5.html
OS X Lion Install to Different Drive
How to create an OS X Lion installation disc MacFixIt
Migration Assistant Update for Mac OS X Snow Leopard
http://www.apple.com/support/lion/installrecovery/
Create an OS X Lion Install disc
http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html

Similar Messages

  • My macbook pro became very slow all of a sudden?

    I just bought a used macbook pro early 2012. It was all restored and nice when I got it. It has worked perfectly for about a week and then I don't know why, but all of a sudden it became very slow in every aspect; Booting, opening apps, even surfing on the web became slower and laggy. It also seems like it has a battery problem when it is in standby. Because it uses a lot of power. Actually so much that it might go dead just by standing for a few hours. Is there anything I can do?

    In regards to the battery situation, try a SMC reset:
    http://support.apple.com/kb/HT3964
    Is there a change?
    When you got the MBP, was Mavericks the installed OSX?  What you may have to do is boot the MBP with the OPTION+COMMAND+R keys.  This will connect you to the Apple servers and allow you to erase the HDD and install the original OSX that the MBP came with.  This sets up the MBP to your Apple ID and will permit you to install any appropriate updates accordingly.  You may then download and install Mavericks from the App Store.
    Ciao.

  • The mac pro run very slow

    Mac pro run very slow

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    Otherwise, take the steps below when you notice the slowdown.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 2
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • TS1541 Mac Pro restart very slow

    Mac Pro restart very slow

    can u check the problem???, thx!!!
    02/08/2012 8:45:17 AM
    com.apple.launchd[1]
    *** launchd[1] has started up. ***
    02/08/2012 8:45:35 AM
    com.apple.SystemStarter[39]
    Starting FTDI ReEnumerate
    02/08/2012 8:45:44 AM
    com.apple.WindowServer[86]
    Thu Aug  2 08:45:44 Norman-19-tony.local WindowServer[86] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    02/08/2012 8:45:46 AM
    com.apple.VoiceOver[109]
    Thu Aug  2 08:45:46 Norman-19-tony.local VoiceOver[109] <Error>: kCGErrorInvalidOperation: CGSOrderWindowList
    02/08/2012 8:45:46 AM
    com.apple.VoiceOver[109]
    Thu Aug  2 08:45:46 Norman-19-tony.local VoiceOver[109] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    02/08/2012 8:46:26 AM
    mdworker[112]
    CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
    02/08/2012 8:50:28 AM
    com.apple.launchd[1]
    *** launchd[1] has started up. ***
    02/08/2012 8:50:55 AM
    com.apple.SystemStarter[40]
    Starting FTDI ReEnumerate
    02/08/2012 8:51:02 AM
    com.apple.WindowServer[84]
    Thu Aug  2 08:51:02 Norman-19-tony.local WindowServer[84] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    02/08/2012 8:51:06 AM
    com.apple.VoiceOver[108]
    Thu Aug  2 08:51:06 Norman-19-tony.local VoiceOver[108] <Error>: kCGErrorInvalidOperation: CGSOrderWindowList
    02/08/2012 8:51:06 AM
    com.apple.VoiceOver[108]
    Thu Aug  2 08:51:06 Norman-19-tony.local VoiceOver[108] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    02/08/2012 8:52:33 AM
    mdworker[117]
    CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
    02/08/2012 8:59:43 AM
    com.apple.launchd[1]
    *** launchd[1] has started up. ***
    02/08/2012 9:00:01 AM
    com.apple.SystemStarter[37]
    Starting FTDI ReEnumerate
    02/08/2012 9:04:20 AM
    com.apple.launchd[1]
    *** launchd[1] has started up. ***
    02/08/2012 9:16:34 AM
    com.apple.SystemStarter[36]
    Starting FTDI ReEnumerate
    02/08/2012 9:17:20 AM
    com.apple.WindowServer[89]
    Thu Aug  2 09:17:20 Norman-19-tony.local WindowServer[89] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    02/08/2012 9:17:38 AM
    com.apple.VoiceOver[117]
    Thu Aug  2 09:17:38 Norman-19-tony.local VoiceOver[117] <Error>: kCGErrorInvalidOperation: CGSOrderWindowList
    02/08/2012 9:17:38 AM
    com.apple.VoiceOver[117]
    Thu Aug  2 09:17:38 Norman-19-tony.local VoiceOver[117] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    02/08/2012 9:22:37 AM
    com.apple.launchctl.Aqua[132]
    launchctl: Please convert the following to launchd: /etc/mach_init_per_user.d/com.adobe.SwitchBoard.monitor.plist
    02/08/2012 9:22:37 AM
    com.apple.launchd.peruser.502[130]
    (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    02/08/2012 9:22:37 AM
    com.apple.launchd.peruser.502[130]
    (com.apple.SystemUIServer.agent) Conflict with job: 0x1002007d0.anonymous.SecurityAgent over Mach service: com.apple.tsm.uiserver
    02/08/2012 9:22:43 AM
    com.apple.launchd.peruser.502[130]
    (com.adobe.ARM.02cf33388772e687002f2fc95af655767c0e42586a504306f58078eb[160]) posix_spawn("/Volumes/AdbeRdr820_en_US_i386/Adobe Reader 8/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper", ...): No such file or directory
    02/08/2012 9:22:43 AM
    com.apple.launchd.peruser.502[130]
    (com.adobe.ARM.02cf33388772e687002f2fc95af655767c0e42586a504306f58078eb[160]) Exited with exit code: 1
    02/08/2012 9:22:49 AM
    com.apple.launchd.peruser.502[130]
    (com.apple.Kerberos.renew.plist[148]) Exited with exit code: 1
    02/08/2012 9:24:30 AM
    com.apple.launchd.peruser.502[130]
    (0x100103850.mach_init.switchboard.sh) Failed to check-in!
    02/08/2012 9:24:41 AM
    Mail[168]
    Could not copy /Volumes/Back B/Font/Del_System fonts/AndalMon to AndalMon -- /var/folders/X8/X80olEdrFmeiqpsPtP9cLU+++TM/-Tmp-/autoactivatedfonts-168/ -- No such file or directory (2)
    02/08/2012 9:25:29 AM
    com.apple.launchd.peruser.502[130]
    ([0x0-0x15015].com.apple.Safari[175]) Exited: Killed
    02/08/2012 9:25:29 AM
    com.apple.launchd.peruser.502[130]
    (com.apple.FolderActions.enabled[155]) Exited: Killed
    02/08/2012 9:25:29 AM
    com.apple.launchd.peruser.502[130]
    (com.apple.AirPortBaseStationAgent[150]) Exited: Killed
    02/08/2012 9:32:05 AM
    com.apple.launchd[1]
    *** launchd[1] has started up. ***
    02/08/2012 9:42:13 AM
    com.apple.SystemStarter[37]
    Starting FTDI ReEnumerate
    02/08/2012 9:42:57 AM
    com.apple.WindowServer[90]
    Thu Aug  2 09:42:57 Norman-19-tony.local WindowServer[90] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    02/08/2012 9:43:05 AM
    com.apple.VoiceOver[117]
    Thu Aug  2 09:43:05 Norman-19-tony.local VoiceOver[117] <Error>: kCGErrorInvalidOperation: CGSOrderWindowList
    02/08/2012 9:43:05 AM
    com.apple.VoiceOver[117]
    Thu Aug  2 09:43:05 Norman-19-tony.local VoiceOver[117] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    02/08/2012 9:43:10 AM
    com.apple.launchctl.Aqua[120]
    launchctl: Please convert the following to launchd: /etc/mach_init_per_user.d/com.adobe.SwitchBoard.monitor.plist
    02/08/2012 9:43:10 AM
    com.apple.launchd.peruser.502[118]
    (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    02/08/2012 9:43:10 AM
    com.apple.launchd.peruser.502[118]
    (com.apple.SystemUIServer.agent) Conflict with job: 0x1005024f0.anonymous.SecurityAgent over Mach service: com.apple.tsm.uiserver
    02/08/2012 9:43:17 AM
    com.apple.launchd.peruser.502[118]
    (com.adobe.ARM.02cf33388772e687002f2fc95af655767c0e42586a504306f58078eb[148]) posix_spawn("/Volumes/AdbeRdr820_en_US_i386/Adobe Reader 8/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper", ...): No such file or directory
    02/08/2012 9:43:17 AM
    com.apple.launchd.peruser.502[118]
    (com.adobe.ARM.02cf33388772e687002f2fc95af655767c0e42586a504306f58078eb[148]) Exited with exit code: 1
    02/08/2012 9:43:21 AM
    com.apple.launchd.peruser.502[118]
    (com.apple.Kerberos.renew.plist[136]) Exited with exit code: 1
    02/08/2012 9:43:27 AM
    com.apple.launchd.peruser.502[118]
    (0x100600070.mach_init.switchboard.sh) Failed to check-in!
    02/08/2012 9:43:48 AM
    Mail[159]
    Could not copy /Volumes/Back B/Font/Del_System fonts/AndalMon to AndalMon -- /var/folders/X8/X80olEdrFmeiqpsPtP9cLU+++TM/-Tmp-/autoactivatedfonts-159/ -- No such file or directory (2)
    02/08/2012 9:44:58 AM
    [0x0-0x11011].com.apple.Safari[163]
    Thu Aug  2 09:44:58 Norman-19-tony.local Safari[163] <Error>: kCGErrorIllegalArgument: CGSShapeWindow
    02/08/2012 9:44:58 AM
    [0x0-0x11011].com.apple.Safari[163]
    Thu Aug  2 09:44:58 Norman-19-tony.local Safari[163] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    02/08/2012 9:44:58 AM
    com.apple.SystemUIServer.agent[123]
    Thu Aug  2 09:44:58 Norman-19-tony.local SystemUIServer[123] <Error>: kCGErrorIllegalArgument: CGSShapeWindow
    02/08/2012 9:44:58 AM
    com.apple.SystemUIServer.agent[123]
    Thu Aug  2 09:44:58 Norman-19-tony.local SystemUIServer[123] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    02/08/2012 9:44:58 AM
    [0x0-0x10010].com.microsoft.mediaplayer[162]
    Thu Aug  2 09:44:58 Norman-19-tony.local Windows Media Player[162] <Error>: kCGErrorIllegalArgument: CGSShapeWindow
    02/08/2012 9:44:58 AM
    [0x0-0x10010].com.microsoft.mediaplayer[162]
    Thu Aug  2 09:44:58 Norman-19-tony.local Windows Media Player[162] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    02/08/2012 9:45:07 AM
    com.apple.SystemUIServer.agent[123]
    Thu Aug  2 09:45:07 Norman-19-tony.local SystemUIServer[123] <Error>: kCGErrorIllegalArgument: CGSShapeWindow
    02/08/2012 9:45:07 AM
    [0x0-0x11011].com.apple.Safari[163]
    Thu Aug  2 09:45:07 Norman-19-tony.local Safari[163] <Error>: kCGErrorIllegalArgument: CGSShapeWindow
    02/08/2012 9:45:07 AM
    [0x0-0x10010].com.microsoft.mediaplayer[162]
    Thu Aug  2 09:45:07 Norman-19-tony.local Windows Media Player[162] <Error>: kCGErrorIllegalArgument: CGSShapeWindow
    02/08/2012 9:45:23 AM
    [0x0-0x11011].com.apple.Safari[163]
    Thu Aug  2 09:45:23 Norman-19-tony.local Safari[163] <Error>: kCGErrorIllegalArgument: CGSShapeWindow
    02/08/2012 9:45:23 AM
    [0x0-0x17017].com.apple.systempreferences[182]
    System Preferences(182,0x7fff70d8bca0) malloc: reference count underflow for 0x200281720, break on auto_refcount_underflow_error to debug.
    02/08/2012 9:45:23 AM
    com.apple.SystemUIServer.agent[123]
    Thu Aug  2 09:45:23 Norman-19-tony.local SystemUIServer[123] <Error>: kCGErrorIllegalArgument: CGSShapeWindow
    02/08/2012 9:45:23 AM
    [0x0-0x10010].com.microsoft.mediaplayer[162]
    Thu Aug  2 09:45:23 Norman-19-tony.local Windows Media Player[162] <Error>: kCGErrorIllegalArgument: CGSShapeWindow
    02/08/2012 9:45:27 AM
    [0x0-0x11011].com.apple.Safari[163]
    Thu Aug  2 09:45:27 Norman-19-tony.local Safari[163] <Error>: kCGErrorIllegalArgument: CGSShapeWindow
    02/08/2012 9:45:27 AM
    com.apple.SystemUIServer.agent[123]
    Thu Aug  2 09:45:27 Norman-19-tony.local SystemUIServer[123] <Error>: kCGErrorIllegalArgument: CGSShapeWindow
    02/08/2012 9:45:27 AM
    [0x0-0x10010].com.microsoft.mediaplayer[162]
    Thu Aug  2 09:45:27 Norman-19-tony.local Windows Media Player[162] <Error>: kCGErrorIllegalArgument: CGSShapeWindow
    02/08/2012 9:45:27 AM
    com.apple.Finder[124]
    Thu Aug  2 09:45:27 Norman-19-tony.local Finder[124] <Error>: kCGErrorIllegalArgument: CGSShapeWindow
    02/08/2012 9:45:27 AM
    com.apple.Finder[124]
    Thu Aug  2 09:45:27 Norman-19-tony.local Finder[124] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    02/08/2012 9:49:39 AM
    mdworker[239]
    CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
    02/08/2012 10:11:43 AM
    Safari[163]
    Could not copy /Volumes/Back B/Font/English_Fonts/V - Fonts/Verdana/Verda to Verda -- /var/folders/X8/X80olEdrFmeiqpsPtP9cLU+++TM/-Tmp-/autoactivatedfonts-163/ -- No such file or directory (2)
    02/08/2012 10:11:43 AM
    Safari[163]
    Could not copy /Volumes/Back B/Font/English_Fonts/V - Fonts/Verdana/VerdaBol to VerdaBol -- /var/folders/X8/X80olEdrFmeiqpsPtP9cLU+++TM/-Tmp-/autoactivatedfonts-163/ -- No such file or directory (2)
    02/08/2012 10:11:43 AM
    Safari[163]
    Could not copy /Volumes/Back B/Font/English_Fonts/V - Fonts/Verdana/VerdaIta to VerdaIta -- /var/folders/X8/X80olEdrFmeiqpsPtP9cLU+++TM/-Tmp-/autoactivatedfonts-163/ -- No such file or directory (2)
    02/08/2012 10:11:43 AM
    Safari[163]
    Could not copy /Volumes/Back B/Font/English_Fonts/V - Fonts/Verdana/VerdaBolIta to VerdaBolIta -- /var/folders/X8/X80olEdrFmeiqpsPtP9cLU+++TM/-Tmp-/autoactivatedfonts-163/ -- No such file or directory (2)
    02/08/2012 10:16:45 AM
    AdobeAcrobat[459]
    *** WARNING: Method selectRow:byExtendingSelection: in class UIT_NSOutlineView is deprecated. It will be removed in a future release and should no longer be used.
    02/08/2012 10:27:09 AM
    Software Update[609]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/Flip4Mac QuickTime Components.pkg
    02/08/2012 10:27:09 AM
    Software Update[609]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/Flip4Mac Web Plugins.pkg
    02/08/2012 10:27:11 AM
    Software Update[609]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/PPD_Installer_RAF4230320.pkg
    02/08/2012 10:27:11 AM
    Software Update[609]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/PPD_Installer_RAF42303u.pkg
    02/08/2012 10:27:12 AM
    Software Update[609]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/SPro10600UC_16a.pkg
    02/08/2012 10:27:12 AM
    Software Update[609]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/SPro10600UC_16b.pkg
    02/08/2012 10:31:36 AM
    com.apple.launchd[1]
    (com.apple.suhelperd[610]) Exited with exit code: 2
    02/08/2012 10:32:41 AM
    Software Update[659]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/Flip4Mac QuickTime Components.pkg
    02/08/2012 10:32:41 AM
    Software Update[659]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/Flip4Mac Web Plugins.pkg
    02/08/2012 10:32:42 AM
    Software Update[659]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/PPD_Installer_RAF4230320.pkg
    02/08/2012 10:32:42 AM
    Software Update[659]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/PPD_Installer_RAF42303u.pkg
    02/08/2012 10:32:43 AM
    Software Update[659]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/SPro10600UC_16a.pkg
    02/08/2012 10:32:43 AM
    Software Update[659]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/SPro10600UC_16b.pkg
    02/08/2012 10:33:18 AM
    Software Update[659]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/Flip4Mac QuickTime Components.pkg
    02/08/2012 10:33:18 AM
    Software Update[659]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/Flip4Mac Web Plugins.pkg
    02/08/2012 10:33:19 AM
    Software Update[659]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/PPD_Installer_RAF4230320.pkg
    02/08/2012 10:33:19 AM
    Software Update[659]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/PPD_Installer_RAF42303u.pkg
    02/08/2012 10:33:19 AM
    Software Update[659]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/SPro10600UC_16a.pkg
    02/08/2012 10:33:19 AM
    Software Update[659]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/SPro10600UC_16b.pkg
    02/08/2012 10:33:56 AM
    com.apple.launchd[1]
    (com.apple.suhelperd[660]) Exited with exit code: 2
    02/08/2012 10:34:09 AM
    com.apple.launchd.peruser.502[118]
    ([0x0-0xe00e].com.apple.mail[159]) Exited: Killed
    02/08/2012 10:34:48 AM
    mdworker[650]
    CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
    02/08/2012 10:35:20 AM
    Safari[688]
    Could not copy /Volumes/Back B/Font/English_Fonts/V - Fonts/Verdana/Verda to Verda -- /var/folders/X8/X80olEdrFmeiqpsPtP9cLU+++TM/-Tmp-/autoactivatedfonts-688/ -- No such file or directory (2)
    02/08/2012 10:35:20 AM
    Safari[688]
    Could not copy /Volumes/Back B/Font/English_Fonts/V - Fonts/Verdana/VerdaBol to VerdaBol -- /var/folders/X8/X80olEdrFmeiqpsPtP9cLU+++TM/-Tmp-/autoactivatedfonts-688/ -- No such file or directory (2)
    02/08/2012 10:35:20 AM
    Safari[688]
    Could not copy /Volumes/Back B/Font/English_Fonts/V - Fonts/Verdana/VerdaIta to VerdaIta -- /var/folders/X8/X80olEdrFmeiqpsPtP9cLU+++TM/-Tmp-/autoactivatedfonts-688/ -- No such file or directory (2)
    02/08/2012 10:35:20 AM
    Safari[688]
    Could not copy /Volumes/Back B/Font/English_Fonts/V - Fonts/Verdana/VerdaBolIta to VerdaBolIta -- /var/folders/X8/X80olEdrFmeiqpsPtP9cLU+++TM/-Tmp-/autoactivatedfonts-688/ -- No such file or directory (2)
    02/08/2012 10:37:36 AM
    [0x0-0x35035].com.apple.Safari[688]
    Thu Aug  2 10:37:36 Norman-19-tony.local Safari[688] <Error>: kCGErrorIllegalArgument: CGSShapeWindow
    02/08/2012 10:37:36 AM
    [0x0-0x35035].com.apple.Safari[688]
    Thu Aug  2 10:37:36 Norman-19-tony.local Safari[688] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    02/08/2012 10:37:36 AM
    com.apple.SystemUIServer.agent[123]
    Thu Aug  2 10:37:36 Norman-19-tony.local SystemUIServer[123] <Error>: kCGErrorIllegalArgument: CGSShapeWindow
    02/08/2012 10:37:36 AM
    com.apple.Finder[124]
    Thu Aug  2 10:37:36 Norman-19-tony.local Finder[124] <Error>: kCGErrorIllegalArgument: CGSShapeWindow
    02/08/2012 10:37:54 AM
    com.apple.SystemUIServer.agent[123]
    Thu Aug  2 10:37:54 Norman-19-tony.local SystemUIServer[123] <Error>: kCGErrorIllegalArgument: CGSShapeWindow
    02/08/2012 10:37:54 AM
    [0x0-0x35035].com.apple.Safari[688]
    Thu Aug  2 10:37:54 Norman-19-tony.local Safari[688] <Error>: kCGErrorIllegalArgument: CGSShapeWindow
    02/08/2012 10:37:54 AM
    com.apple.Finder[124]
    Thu Aug  2 10:37:54 Norman-19-tony.local Finder[124] <Error>: kCGErrorIllegalArgument: CGSShapeWindow
    02/08/2012 10:38:40 AM
    com.apple.launchd.peruser.502[118]
    (com.apple.FolderActions.enabled[143]) Exited: Killed
    02/08/2012 10:38:40 AM
    com.apple.launchd.peruser.502[118]
    (com.apple.AirPortBaseStationAgent[138]) Exited: Killed
    02/08/2012 10:38:42 AM
    com.apple.loginwindow[717]
    2012-08-02 10:38:42.050 loginwindow[717:107] ERROR[1102]:  Could not look up the startup port for VoiceOver (loaded by launchd?) and start. Using failsafe method
    02/08/2012 10:38:42 AM
    com.apple.WindowServer[718]
    Thu Aug  2 10:38:42 Norman-19-tony.local WindowServer[718] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    02/08/2012 10:38:43 AM
    com.apple.launchd[1]
    (com.apple.VoiceOver) Conflict with job: 0x100500b20.mach_init.VoiceOver over Mach service: com.apple.VoiceOver.running
    02/08/2012 10:52:18 AM
    com.apple.launchd[1]
    *** launchd[1] has started up. ***
    02/08/2012 11:01:25 AM
    com.apple.SystemStarter[37]
    Starting FTDI ReEnumerate
    02/08/2012 11:02:11 AM
    com.apple.WindowServer[91]
    Thu Aug  2 11:02:11 Norman-19-tony.local WindowServer[91] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    02/08/2012 11:06:01 AM
    com.apple.launchd[1]
    *** launchd[1] has started up. ***
    02/08/2012 11:15:08 AM
    com.apple.SystemStarter[36]
    Starting FTDI ReEnumerate
    02/08/2012 11:15:40 AM
    com.apple.WindowServer[89]
    Thu Aug  2 11:15:40 Norman-19-tony.local WindowServer[89] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    02/08/2012 11:19:19 AM
    com.apple.launchd[1]
    *** launchd[1] has started up. ***
    02/08/2012 11:28:25 AM
    com.apple.SystemStarter[37]
    Starting FTDI ReEnumerate
    02/08/2012 11:29:10 AM
    com.apple.WindowServer[92]
    Thu Aug  2 11:29:10 Norman-19-tony.local WindowServer[92] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    02/08/2012 11:29:18 AM
    com.apple.VoiceOver[120]
    Thu Aug  2 11:29:18 Norman-19-tony.local VoiceOver[120] <Error>: kCGErrorInvalidOperation: CGSOrderWindowList
    02/08/2012 11:29:18 AM
    com.apple.VoiceOver[120]
    Thu Aug  2 11:29:18 Norman-19-tony.local VoiceOver[120] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    02/08/2012 11:30:30 AM
    mdworker[128]
    CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
    02/08/2012 11:30:37 AM
    com.apple.launchctl.Aqua[130]
    launchctl: Please convert the following to launchd: /etc/mach_init_per_user.d/com.adobe.SwitchBoard.monitor.plist
    02/08/2012 11:30:37 AM
    com.apple.launchd.peruser.502[124]
    (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    02/08/2012 11:30:37 AM
    com.apple.launchd.peruser.502[124]
    (com.apple.SystemUIServer.agent) Conflict with job: 0x1005024f0.anonymous.SecurityAgent over Mach service: com.apple.tsm.uiserver
    02/08/2012 11:30:42 AM
    com.apple.launchd.peruser.502[124]
    (com.adobe.ARM.02cf33388772e687002f2fc95af655767c0e42586a504306f58078eb[156]) posix_spawn("/Volumes/AdbeRdr820_en_US_i386/Adobe Reader 8/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper", ...): No such file or directory
    02/08/2012 11:30:42 AM
    com.apple.launchd.peruser.502[124]
    (com.adobe.ARM.02cf33388772e687002f2fc95af655767c0e42586a504306f58078eb[156]) Exited with exit code: 1
    02/08/2012 11:30:47 AM
    com.apple.launchd.peruser.502[124]
    (com.apple.Kerberos.renew.plist[144]) Exited with exit code: 1
    02/08/2012 11:30:50 AM
    com.apple.launchd.peruser.502[124]
    (0x100200c80.mach_init.switchboard.sh) Failed to check-in!
    02/08/2012 11:36:44 AM
    Software Update[205]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/Flip4Mac QuickTime Components.pkg
    02/08/2012 11:36:44 AM
    Software Update[205]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/Flip4Mac Web Plugins.pkg
    02/08/2012 11:36:49 AM
    Software Update[205]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/PPD_Installer_RAF4230320.pkg
    02/08/2012 11:36:49 AM
    Software Update[205]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/PPD_Installer_RAF42303u.pkg
    02/08/2012 11:36:50 AM
    Software Update[205]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/SPro10600UC_16a.pkg
    02/08/2012 11:36:50 AM
    Software Update[205]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/SPro10600UC_16b.pkg
    02/08/2012 11:38:10 AM
    Software Update[205]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/Flip4Mac QuickTime Components.pkg
    02/08/2012 11:38:10 AM
    Software Update[205]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/Flip4Mac Web Plugins.pkg
    02/08/2012 11:38:10 AM
    Software Update[205]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/PPD_Installer_RAF4230320.pkg
    02/08/2012 11:38:10 AM
    Software Update[205]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/PPD_Installer_RAF42303u.pkg
    02/08/2012 11:38:10 AM
    Software Update[205]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/SPro10600UC_16a.pkg
    02/08/2012 11:38:10 AM
    Software Update[205]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/SPro10600UC_16b.pkg
    02/08/2012 11:39:12 AM
    com.apple.launchd[1]
    (com.apple.suhelperd[207]) Exited with exit code: 2
    02/08/2012 11:46:59 AM
    HelpViewer[246]
    Error loading /Library/ScriptingAdditions/QXPScriptingAdditions.osax/Contents/MacOS/QXPScript ingAdditions:  dlopen(/Library/ScriptingAdditions/QXPScriptingAdditions.osax/Contents/MacOS/QX PScriptingAdditions, 262): no suitable image found.  Did find:
    /Library/ScriptingAdditions/QXPScriptingAdditions.osax/Contents/MacOS/QXPScripti ngAdditions: no matching architecture in universal wrapper
    02/08/2012 11:46:59 AM
    [0x0-0x21021].com.apple.helpviewer[246]
    HelpViewer: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/QXPScriptingAdditions.osax" declares no loadable handlers.
    02/08/2012 11:46:59 AM
    System Preferences[190]
    .scriptSuite warning for result type of command 'timedLoad' in suite 'SystemPreferences': the type NSNumber ('long') doesn't match the result Apple event code ('doub').
    02/08/2012 11:58:20 AM
    [0x0-0x25025].com.apple.appstore[287]
    Thu Aug  2 11:58:20 Norman-19-tony.local App Store[287] <Error>: CGBitmapContextGetBitsPerComponent: invalid context 0x11398df20
    02/08/2012 11:58:20 AM
    [0x0-0x25025].com.apple.appstore[287]
    This isn't a bitmap context. Forcing destination format to ARGB_8 for CGContext.
    02/08/2012 11:58:21 AM
    [0x0-0x25025].com.apple.appstore[287]
    Thu Aug  2 11:58:21 Norman-19-tony.local App Store[287] <Error>: CGBitmapContextGetBitsPerComponent: invalid context 0x11398df20
    02/08/2012 11:58:21 AM
    [0x0-0x25025].com.apple.appstore[287]
    This isn't a bitmap context. Forcing destination format to ARGB_8 for CGContext.
    02/08/2012 11:58:21 AM
    [0x0-0x25025].com.apple.appstore[287]
    Thu Aug  2 11:58:21 Norman-19-tony.local App Store[287] <Error>: CGBitmapContextGetBitsPerComponent: invalid context 0x11398df20
    02/08/2012 11:58:21 AM
    [0x0-0x25025].com.apple.appstore[287]
    This isn't a bitmap context. Forcing destination format to ARGB_8 for CGContext.
    02/08/2012 11:58:21 AM
    [0x0-0x25025].com.apple.appstore[287]
    Thu Aug  2 11:58:21 Norman-19-tony.local App Store[287] <Error>: CGBitmapContextGetBitsPerComponent: invalid context 0x11398df20
    02/08/2012 11:58:21 AM
    [0x0-0x25025].com.apple.appstore[287]
    This isn't a bitmap context. Forcing destination format to ARGB_8 for CGContext.
    02/08/2012 11:58:21 AM
    [0x0-0x25025].com.apple.appstore[287]
    Thu Aug  2 11:58:21 Norman-19-tony.local App Store[287] <Error>: CGBitmapContextGetBitsPerComponent: invalid context 0x11398df20
    02/08/2012 11:58:21 AM
    [0x0-0x25025].com.apple.appstore[287]
    This isn't a bitmap context. Forcing destination format to ARGB_8 for CGContext.
    02/08/2012 11:58:21 AM
    storeagent[290]
    port created
    02/08/2012 11:58:22 AM
    [0x0-0x25025].com.apple.appstore[287]
    Thu Aug  2 11:58:22 Norman-19-tony.local App Store[287] <Error>: CGBitmapContextGetBitsPerComponent: invalid context 0x11398df20
    02/08/2012 11:58:22 AM
    [0x0-0x25025].com.apple.appstore[287]
    This isn't a bitmap context. Forcing destination format to ARGB_8 for CGContext.
    02/08/2012 11:58:22 AM
    [0x0-0x25025].com.apple.appstore[287]
    Thu Aug  2 11:58:22 Norman-19-tony.local App Store[287] <Error>: CGBitmapContextGetBitsPerComponent: invalid context 0x11398df20
    02/08/2012 11:58:22 AM
    [0x0-0x25025].com.apple.appstore[287]
    This isn't a bitmap context. Forcing destination format to ARGB_8 for CGContext.
    02/08/2012 11:58:22 AM
    [0x0-0x25025].com.apple.appstore[287]
    Thu Aug  2 11:58:22 Norman-19-tony.local App Store[287] <Error>: CGBitmapContextGetBitsPerComponent: invalid context 0x11398df20
    02/08/2012 11:58:22 AM
    [0x0-0x25025].com.apple.appstore[287]
    This isn't a bitmap context. Forcing destination format to ARGB_8 for CGContext.
    02/08/2012 11:58:22 AM
    [0x0-0x25025].com.apple.appstore[287]
    Thu Aug  2 11:58:22 Norman-19-tony.local App Store[287] <Error>: CGBitmapContextGetBitsPerComponent: invalid context 0x11398df20
    02/08/2012 11:58:22 AM
    [0x0-0x25025].com.apple.appstore[287]
    This isn't a bitmap context. Forcing destination format to ARGB_8 for CGContext.
    02/08/2012 11:58:22 AM
    [0x0-0x25025].com.apple.appstore[287]
    Thu Aug  2 11:58:22 Norman-19-tony.local App Store[287] <Error>: CGBitmapContextGetBitsPerComponent: invalid context 0x11398df20
    02/08/2012 11:58:22 AM
    [0x0-0x25025].com.apple.appstore[287]
    This isn't a bitmap context. Forcing destination format to ARGB_8 for CGContext.
    02/08/2012 11:58:27 AM
    [0x0-0x25025].com.apple.appstore[287]
    Thu Aug  2 11:58:27 Norman-19-tony.local App Store[287] <Error>: CGBitmapContextGetBitsPerComponent: invalid context 0x11398df20
    02/08/2012 11:58:27 AM
    [0x0-0x25025].com.apple.appstore[287]
    This isn't a bitmap context. Forcing destination format to ARGB_8 for CGContext.
    02/08/2012 11:58:29 AM
    [0x0-0x25025].com.apple.appstore[287]
    Thu Aug  2 11:58:29 Norman-19-tony.local App Store[287] <Error>: CGBitmapContextGetBitsPerComponent: invalid context 0x11398df20
    02/08/2012 11:58:29 AM
    [0x0-0x25025].com.apple.appstore[287]
    This isn't a bitmap context. Forcing destination format to ARGB_8 for CGContext.
    02/08/2012 11:58:29 AM
    [0x0-0x25025].com.apple.appstore[287]
    Thu Aug  2 11:58:29 Norman-19-tony.local App Store[287] <Error>: CGBitmapContextGetBitsPerComponent: invalid context 0x11398df20
    02/08/2012 11:58:29 AM
    [0x0-0x25025].com.apple.appstore[287]
    This isn't a bitmap context. Forcing destination format to ARGB_8 for CGContext.
    02/08/2012 11:58:29 AM
    [0x0-0x25025].com.apple.appstore[287]
    Thu Aug  2 11:58:29 Norman-19-tony.local App Store[287] <Error>: CGBitmapContextGetBitsPerComponent: invalid context 0x11398df20
    02/08/2012 11:58:29 AM
    [0x0-0x25025].com.apple.appstore[287]
    This isn't a bitmap context. Forcing destination format to ARGB_8 for CGContext.
    02/08/2012 11:58:29 AM
    [0x0-0x25025].com.apple.appstore[287]
    Thu Aug  2 11:58:29 Norman-19-tony.local App Store[287] <Error>: CGBitmapContextGetBitsPerComponent: invalid context 0x11398df20
    02/08/2012 11:58:29 AM
    [0x0-0x25025].com.apple.appstore[287]
    This isn't a bitmap context. Forcing destination format to ARGB_8 for CGContext.
    02/08/2012 11:58:29 AM
    [0x0-0x25025].com.apple.appstore[287]
    Thu Aug  2 11:58:29 Norman-19-tony.local App Store[287] <Error>: CGBitmapContextGetBitsPerComponent: invalid context 0x11398df20
    02/08/2012 11:58:29 AM
    [0x0-0x25025].com.apple.appstore[287]
    This isn't a bitmap context. Forcing destination format to ARGB_8 for CGContext.
    02/08/2012 11:59:15 AM
    [0x0-0x25025].com.apple.appstore[287]
    Thu Aug  2 11:59:15 Norman-19-tony.local App Store[287] <Error>: CGBitmapContextGetBitsPerComponent: invalid context 0x11398df20
    02/08/2012 11:59:15 AM
    [0x0-0x25025].com.apple.appstore[287]
    This isn't a bitmap context. Forcing destination format to ARGB_8 for CGContext.
    02/08/2012 11:59:40 AM
    Software Update[299]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/Flip4Mac QuickTime Components.pkg
    02/08/2012 11:59:40 AM
    Software Update[299]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/Flip4Mac Web Plugins.pkg
    02/08/2012 11:59:40 AM
    Software Update[299]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/PPD_Installer_RAF4230320.pkg
    02/08/2012 11:59:40 AM
    Software Update[299]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/PPD_Installer_RAF42303u.pkg
    02/08/2012 11:59:41 AM
    Software Update[299]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/SPro10600UC_16a.pkg
    02/08/2012 11:59:41 AM
    Software Update[299]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/SPro10600UC_16b.pkg
    02/08/2012 12:00:23 PM
    Software Update[299]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/Flip4Mac QuickTime Components.pkg
    02/08/2012 12:00:23 PM
    Software Update[299]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/Flip4Mac Web Plugins.pkg
    02/08/2012 12:00:23 PM
    Software Update[299]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/PPD_Installer_RAF4230320.pkg
    02/08/2012 12:00:23 PM
    Software Update[299]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/PPD_Installer_RAF42303u.pkg
    02/08/2012 12:00:23 PM
    Software Update[299]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/SPro10600UC_16a.pkg
    02/08/2012 12:00:23 PM
    Software Update[299]
    PackageKit: *** Missing bundle identifier: /Library/Receipts/SPro10600UC_16b.pkg
    02/08/2012 12:02:59 PM
    perl[1898]
    Error loading /Library/ScriptingAdditions/QXPScriptingAdditions.osax/Contents/MacOS/QXPScript ingAdditions:  dlopen(/Library/ScriptingAdditions/QXPScriptingAdditions.osax/Contents/MacOS/QX PScriptingAdditions, 262): no suitable image found.  Did find:
    /Library/ScriptingAdditions/QXPScriptingAdditions.osax/Contents/MacOS/QXPScripti ngAdditions: no matching architecture in universal wrapper
    02/08/2012 12:03:00 PM
    [0x0-0x29029].com.apple.systemevents[1899]
    com.apple.FolderActions.enabled: Already loaded
    02/08/2012 12:09:50 PM
    com.apple.launchd[1]
    (com.apple.suhelperd[301]) Exited with exit code: 2
    02/08/2012 12:17:32 PM
    com.apple.launchd.peruser.502[124]
    ([0x0-0x14014].com.apple.mail[167]) Exited: Killed
    02/08/2012 12:17:32 PM
    com.apple.launchd.peruser.502[124]
    (com.apple.FolderActions.enabled[151]) Exited: Killed
    02/08/2012 12:17:53 PM
    com.apple.launchd[1]
    *** launchd[1] has started up. ***
    02/08/2012 12:27:10 PM
    com.apple.SystemStarter[40]
    Starting FTDI ReEnumerate
    02/08/2012 12:27:43 PM
    com.apple.WindowServer[88]
    Thu Aug  2 12:27:43 Norman-19-tony.local WindowServer[88] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    02/08/2012 12:27:50 PM
    com.apple.VoiceOver[115]
    Thu Aug  2 12:27:50 Norman-19-tony.local VoiceOver[115] <Error>: kCGErrorInvalidOperation: CGSOrderWindowList
    02/08/2012 12:27:50 PM
    com.apple.VoiceOver[115]
    Thu Aug  2 12:27:50 Norman-19-tony.local VoiceOver[115] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    02/08/2012 12:27:52 PM
    com.apple.launchctl.Aqua[118]
    launchctl: Please convert the following to launchd: /etc/mach_init_per_user.d/com.adobe.SwitchBoard.monitor.plist
    02/08/2012 12:27:52 PM
    com.apple.launchd.peruser.502[116]
    (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    02/08/2012 12:27:52 PM
    com.apple.launchd.peruser.502[116]
    (com.apple.SystemUIServer.agent) Conflict with job: 0x100501290.anonymous.SecurityAgent over Mach service: com.apple.tsm.uiserver
    02/08/2012 12:27:58 PM
    com.apple.launchd.peruser.502[116]
    (com.adobe.ARM.02cf33388772e687002f2fc95af655767c0e42586a504306f58078eb[145]) posix_spawn("/Volumes/AdbeRdr820_en_US_i386/Adobe Reader 8/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper", ...): No such file or directory
    02/08/2012 12:27:58 PM
    com.apple.launchd.peruser.502[116]
    (com.adobe.ARM.02cf33388772e687002f2fc95af655767c0e42586a504306f58078eb[145]) Exited with exit code: 1
    02/08/2012 12:28:02 PM
    com.apple.launchd.peruser.502[116]
    (com.apple.Kerberos.renew.plist[133]) Exited with exit code: 1
    02/08/2012 12:28:16 PM
    com.apple.launchd.peruser.502[116]
    (0x100500000.mach_init.switchboard.sh) Failed to check-in!
    02/08/2012 12:28:32 PM
    Mail[156]
    Could not copy /Volumes/Back B/Font/Del_System fonts/AndalMon to AndalMon -- /var/folders/X8/X80olEdrFmeiqpsPtP9cLU+++TM/-Tmp-/autoactivatedfonts-156/ -- No such file or directory (2)
    02/08/2012 12:28:34 PM
    [0x0-0x10010].com.creo.PrinergyEvoClient[159]
    Thu Aug  2 12:28:34 Norman-19-tony.local Prinergy Evo[159] <Error>: kCGErrorIllegalArgument: CGSOrderWindowList
    02/08/2012 12:28:34 PM
    [0x0-0x10010].com.creo.PrinergyEvoClient[159]
    Thu Aug  2 12:28:34 Norman-19-tony.local Prinergy Evo[159] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    02/08/2012 12:29:27 PM
    [0x0-0x17017].com.apple.systempreferences[174]
    System Preferences(174,0x7fff70d8bca0) malloc: reference count underflow for 0x2000eaf60, break on auto_refcount_underflow_error to debug.
    02/08/2012 12:30:49 PM
    com.apple.launchd.peruser.502[116]
    ([0x0-0x12012].com.apple.Safari[161]) Exited: Killed
    02/08/2012 12:30:49 PM
    com.apple.launchd.peruser.502[116]
    (com.apple.AirPortBaseStationAgent[135]) Exited: Killed
    02/08/2012 12:30:49 PM
    com.apple.launchd.peruser.502[116]
    (com.apple.FolderActions.enabled[140]) Exited: Killed
    02/08/2012 12:30:49 PM
    com.apple.launchd.peruser.502[116]
    ([0x0-0xf00f].com.apple.mail[156]) Exited: Killed
    02/08/2012 12:31:30 PM
    com.apple.launchd[1]
    *** launchd[1] has started up. ***
    02/08/2012 12:40:37 PM
    com.apple.SystemStarter[37]
    Starting FTDI ReEnumerate
    02/08/2012 12:41:18 PM
    com.apple.WindowServer[91]
    Thu Aug  2 12:41:18 Norman-19-tony.local WindowServer[91] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    02/08/2012 12:41:27 PM
    com.apple.VoiceOver[117]
    Thu Aug  2 12:41:27 Norman-19-tony.local VoiceOver[117] <Error>: kCGErrorInvalidOperation: CGSOrderWindowList
    02/08/2012 12:41:27 PM
    com.apple.VoiceOver[117]
    Thu Aug  2 12:41:27 Norman-19-tony.local VoiceOver[117] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    02/08/2012 12:41:30 PM
    com.apple.launchctl.Aqua[120]
    launchctl: Please convert the following to launchd: /etc/mach_init_per_user.d/com.adobe.SwitchBoard.monitor.plist
    02/08/2012 12:41:30 PM
    com.apple.launchd.peruser.502[118]
    (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    02/08/2012 12:41:30 PM
    com.apple.launchd.peruser.502[118]
    (com.apple.SystemUIServer.agent) Conflict with job: 0x1001001a0.anonymous.SecurityAgent over Mach service: com.apple.tsm.uiserver
    02/08/2012 12:41:36 PM
    com.apple.launchd.peruser.502[118]
    (com.adobe.ARM.02cf33388772e687002f2fc95af655767c0e42586a504306f58078eb[147]) posix_spawn("/Volumes/AdbeRdr820_en_US_i386/Adobe Reader 8/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper", ...): No such file or directory
    02/08/2012 12:41:36 PM
    com.apple.launchd.peruser.502[118]
    (com.adobe.ARM.02cf33388772e687002f2fc95af655767c0e42586a504306f58078eb[147]) Exited with exit code: 1
    02/08/2012 12:41:42 PM
    com.apple.launchd.peruser.502[118]
    (com.apple.Kerberos.renew.plist[135]) Exited with exit code: 1
    02/08/2012 12:41:46 PM
    com.apple.launchd.peruser.502[118]
    (0x100600070.mach_init.switchboard.sh) Failed to check-in!
    02/08/2012 12:42:05 PM
    Mail[158]
    Could not copy /Volumes/Back B/Font/Del_System fonts/AndalMon to AndalMon -- /var/folders/X8/X80olEdrFmeiqpsPtP9cLU+++TM/-Tmp-/autoactivatedfonts-158/ -- No such file or directory (2)
    02/08/2012 12:44:07 PM
    Safari[164]
    *** WebKit discarding exception: <NSImageCacheException> Cannot lock focus on image <NSImage 0x120cc46b0 Size={0, 0} Reps=(
    )>, because it is size zero.
    02/08/2012 12:44:07 PM
    Safari[164]
    *** WebKit discarding exception: <NSImageCacheException> Cannot lock focus on image <NSImage 0x120cba9e0 Size={0, 0} Reps=(
    )>, because it is size zero.
    02/08/2012 12:44:07 PM
    Safari[164]
    *** WebKit discarding exception: <NSImageCacheException> Cannot lock focus on image <NSImage 0x120cc6730 Size={0, 0} Reps=(
    )>, because it is size zero.
    02/08/2012 12:44:39 PM
    [0x0-0x17017].com.apple.systempreferences[180]
    Couldn't find any matches.
    02/08/2012 12:44:59 PM
    Safari[164]
    Could not copy /Volumes/Back B/Font/English_Fonts/V - Fonts/Verdana/Verda to Verda -- /var/folders/X8/X80olEdrFmeiqpsPtP9cLU+++TM/-Tmp-/autoactivatedfonts-164/ -- No such file or directory (2)
    02/08/2012 12:44:59 PM
    Safari[164]
    Could not copy /Volumes/Back B/Font/English_Fonts/V - Fonts/Verdana/VerdaBol to VerdaBol -- /var/folders/X8/X80olEdrFmeiqpsPtP9cLU+++TM/-Tmp-/autoactivatedfonts-164/ -- No such file or directory (2)
    02/08/2012 12:44:59 PM
    Safari[164]
    Could not copy /Volumes/Back B/Font/English_Fonts/V - Fonts/Verdana/VerdaIta to VerdaIta -- /var/folders/X8/X80olEdrFmeiqpsPtP9cLU+++TM/-Tmp-/autoactivatedfonts-164/ -- No such file or directory (2)
    02/08/2012 12:44:59 PM
    Safari[164]
    Could not copy /Volumes/Back B/Font/English_Fonts/V - Fonts/Verdana/VerdaBolIta to VerdaBolIta -- /var/folders/X8/X80olEdrFmeiqpsPtP9cLU+++TM/-Tmp-/autoactivatedfonts-164/ -- No such file or directory (2)
    02/08/2012 12:49:58 PM
    mdworker[209]
    CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
    02/08/2012 1:09:34 PM
    Safari[164]
    *** WebKit discarding exception: <NSImageCacheException> Cannot lock focus on image <NSImage 0x121a05540 Size={0, 0} Reps=(
    )>, because it is size zero.
    02/08/2012 1:41:31 PM
    SubmitDiagInfo[350]
    Cleaning up expired diagnostic messages database at path: /var/log/DiagnosticMessages/2012.07.03.asl
    02/08/2012 1:41:33 PM
    SubmitDiagInfo[350]
    Removed expired file /Users/Norman19/Library/Logs/DiagnosticReports/Adobe Illustrator_2012-07-19-104452_Norman-19-tony.crash
    02/08/2012 1:41:33 PM
    SubmitDiagInfo[350]
    Removed expired file /Users/Norman19/Library/Logs/DiagnosticReports/Adobe Illustrator_2012-07-19-111915_Norman-19-tony.crash
    02/08/2012 1:42:20 PM
    SubmitDiagInfo[350]
    SubmitDiagInfo successfully uploaded 66 diagnostic messages.
    02/08/2012 2:27:26 PM
    Safari[164]
    *** WebKit discarding exception: <NSImageCacheException> Cannot lock focus on image <NSImage 0x12765ebc0 Size={0, 0} Reps=(
    )>, because it is size zero.
    02/08/2012 2:28:15 PM
    Safari[164]
    *** WebKit discarding exception: <NSImageCacheException> Cannot lock focus on image <NSImage 0x1329eeb20 Size={0, 0} Reps=(
    )>, because it is size zero.
    02/08/2012 2:36:18 PM
    Safari[164]
    *** WebKit discarding exception: <NSImageCacheException> Cannot lock focus on image <NSImage 0x120c24270 Size={0, 0} Reps=(
    )>, because it is size zero.
    02/08/2012 2:37:30 PM
    System Preferences[468]
    Could not connect the action resetLocationWarningsSheetOk: to target of class AppleSecurity_Pref
    02/08/2012 2:37:30 PM
    System Preferences[468]
    Could not connect the action resetLocationWarningsSheetCancel: to target of class AppleSecurity_Pref
    02/08/2012 2:38:34 PM
    [0x0-0x30030].com.apple.systempreferences[468]
    Couldn't find any matches.
    02/08/2012 2:39:12 PM
    System Preferences[568]
    MailMe: No suitable SMTP account found
    02/08/2012 2:39:13 PM
    System Preferences[568]
    Could not copy /Volumes/Back B/Font/Fonts Folder/G/Georg to Georg -- /var/folders/X8/X80olEdrFmeiqpsPtP9cLU+++TM/-Tmp-/autoactivatedfonts-568/ -- No such file or directory (2)
    02/08/2012 2:39:13 PM
    System Preferences[568]
    Could not copy /Volumes/Back B/Font/Fonts Folder/G/GeorgBol to GeorgBol -- /var/folders/X8/X80olEdrFmeiqpsPtP9cLU+++TM/-Tmp-/autoactivatedfonts-568/ -- No such file or directory (2)
    02/08/2012 2:39:13 PM
    System Preferences[568]
    Could not copy /Volumes/Back B/Font/Fonts Folder/G/GeorgIta to GeorgIta -- /var/folders/X8/X80olEdrFmeiqpsPtP9cLU+++TM/-Tmp-/autoactivatedfonts-568/ -- No such file or directory (2)
    02/08/2012 2:39:13 PM
    System Preferences[568]
    Could not copy /Volumes/Back B/Font/Fonts Folder/G/GeorgBolIta to GeorgBolIta -- /var/folders/X8/X80olEdrFmeiqpsPtP9cLU+++TM/-Tmp-/autoactivatedfonts-568/ -- No such file or directory (2)
    02/08/2012 2:39:13 PM
    System Preferences[568]
    Could not copy /Volumes/Back B/Font/English_Fonts/V - Fonts/Verdana/Verda to Verda -- /var/folders/X8/X80olEdrFmeiqpsPtP9cLU+++TM/-Tmp-/autoactivatedfonts-568/ -- No such file or directory (2)
    02/08/2012 2:39:13 PM
    System Preferences[568]
    Could not copy /Volumes/Back B/Font/English_Fonts/V - Fonts/Verdana/VerdaBol to VerdaBol -- /var/folders/X8/X80olEdrFmeiqpsPtP9cLU+++TM/-Tmp-/autoactivatedfonts-568/ -- No such file or directory (2)
    02/08/2012 2:39:13 PM
    System Preferences[568]
    Could not copy /Volumes/Back B/Font/English_Fonts/V - Fonts/Verdana/VerdaIta to VerdaIta -- /var/folders/X8/X80olEdrFmeiqpsPtP9cLU+++TM/-Tmp-/autoactivatedfonts-568/ -- No such file or directory (2)
    02/08/2012 2:39:13 PM
    System Preferences[568]
    Could not copy /Volumes/Back B/Font/English_Fonts/V - Fonts/Verdana/VerdaBolIta to VerdaBolIta -- /var/folders/X8/X80olEdrFmeiqpsPtP9cLU+++TM/-Tmp-/autoactivatedfonts-568/ -- No such file or directory (2)
    02/08/2012 3:36:23 PM
    mdworker[689]
    CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
    02/08/2012 3:36:34 PM
    com.apple.launchd.peruser.502[118]
    (com.apple.AirPortBaseStationAgent[137]) Exited: Killed
    02/08/2012 3:36:34 PM
    com.apple.launchd.peruser.502[118]
    (com.apple.FolderActions.enabled[142]) Exited: Killed
    02/08/2012 3:36:34 PM
    com.apple.launchd.peruser.502[118]
    ([0x0-0x33033].com.apple.inputmethod.TCIM[504]) Exited: Killed
    02/08/2012 3:36:34 PM
    com.apple.launchd.peruser.502[118]
    ([0x0-0xf00f].com.apple.mail[158]) Exited: Killed
    02/08/2012 3:40:27 PM
    com.apple.launchd[1]
    *** launchd[1] has started up. ***
    02/08/2012 3:50:33 PM
    com.apple.SystemStarter[36]
    Starting FTDI ReEnumerate
    02/08/2012 3:51:16 PM
    com.apple.WindowServer[92]
    Thu Aug  2 15:51:16 Norman-19-tony.local WindowServer[92] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    02/08/2012 3:51:24 PM
    com.apple.VoiceOver[116]
    Thu Aug  2 15:51:24 Norman-19-tony.local VoiceOver[116] <Error>: kCGErrorInvalidOperation: CGSOrderWindowList
    02/08/2012 3:51:24 PM
    com.apple.VoiceOver[116]
    Thu Aug  2 15:51:24 Norman-19-tony.local VoiceOver[116] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    02/08/2012 3:51:26 PM
    com.apple.launchctl.Aqua[119]
    launchctl: Please convert the following to launchd: /etc/mach_init_per_user.d/com.adobe.SwitchBoard.monitor.plist
    02/08/2012 3:51:26 PM
    com.apple.launchd.peruser.502[117]
    (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    02/08/2012 3:51:26 PM
    com.apple.launchd.peruser.502[117]
    (com.apple.SystemUIServer.agent) Conflict with job: 0x100202f40.anonymous.SecurityAgent over Mach service: com.apple.tsm.uiserver
    02/08/2012 3:51:32 PM
    com.apple.launchd.peruser.502[117]
    (com.adobe.ARM.02cf33388772e687002f2fc95af655767c0e42586a504306f58078eb[146]) posix_spawn("/Volumes/AdbeRdr820_en_US_i386/Adobe Reader 8/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper", ...): No such file or directory
    02/08/2012 3:51:32 PM
    com.apple.launchd.peruser.502[117]
    (com.adobe.ARM.02cf33388772e687002f2fc95af655767c0e42586a504306f58078eb[146]) Exited with exit code: 1
    02/08/2012 3:51:35 PM
    com.apple.launchd.peruser.502[117]
    (com.apple.Kerberos.renew.plist[134]) Exited with exit code: 1
    02/08/2012 3:51:49 PM
    com.apple.launchd.peruser.502[117]
    (0x100303010.mach_init.switchboard.sh) Failed to check-in!
    02/08/2012 3:52:06 PM
    Mail[156]
    Could not copy /Volumes/Back B/Font/Del_System fonts/AndalMon to AndalMon -- /var/folders/X8/X80olEdrFmeiqpsPtP9cLU+++TM/-Tmp-/autoactivatedfonts-156/ -- No such file or directory (2)
    02/08/2012 3:54:57 PM
    ARM[170]
    Adobe Reader Updater encountered errorCode 1651
    02/08/2012 3:54:58 PM
    com.apple.launchd.peruser.502[117]
    ([0x0-0x12012].com.apple.Safari[162]) Exited: Killed
    02/08/2012 3:54:58 PM
    com.apple.launchd.peruser.502[117]
    (com.apple.FolderActions.enabled[141]) Exited: Killed
    02/08/2012 3:54:58 PM
    com.apple.launchd.peruser.502[117]
    (com.apple.AirPortBaseStationAgent[136]) Exited: Killed
    02/08/2012 3:54:58 PM
    com.apple.launchd.peruser.502[117]
    ([0x0-0xd00d].com.apple.mail[156]) Exited: Killed
    02/08/2012 4:10:31 PM
    com.apple.launchd[1]
    *** launchd[1] has started up. ***
    02/08/2012 4:20:35 PM
    com.apple.SystemStarter[36]
    Starting FTDI ReEnumerate
    02/08/2012 4:21:16 PM
    com.apple.WindowServer[89]
    Thu Aug  2 16:21:16 Norman-19-tony.local WindowServer[89] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    02/08/2012 4:21:23 PM
    com.apple.VoiceOver[120]
    Thu Aug  2 16:21:23 Norman-19-tony.local VoiceOver[120] <Error>: kCGErrorInvalidOperation: CGSOrderWindowList
    02/08/2012 4:21:23 PM
    com.apple.VoiceOver[120]
    Thu Aug  2 16:21:23 Norman-19-tony.local VoiceOver[120] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to c

  • Mac suddenly became very slow on OS-X

    Problem description:
    Machine became suddenly very slow only on OS-X. Checked with Linux and works ok.
    Detailed description:
    On December 31th machine begun to behave abnormally slow.  Long waits between keystrokes and the character appearance on the screen and the coloured spinning wheel appeared very often. The machine appeared to hang from time to time, applications and internet were completely unresponssive.  I decided to make clean install of Yosemite using its recovery. The recovery took longer than 16  hours and after this the machine was in the same state as before. In order to debug the problem I decided to use a Linux distribution and I booted its live dvd. On Linux everything went smooth, all application and operations were responsive, no hiccups.
    I drove the conclusion that the issue is related either to the software in OS-X or there is some hidden state/settings on the machine that is causing the issue.
    It cannot be on the hard drive because I have repartitioned it and made a clean install so there must be something in the firmware.
    Problem description:
    Random hangs on the computer. Everything becomes unresponsive, spinning wheel appear every 3-4 seconds and keystrokes are echoed with a 4-5 seconds delay. I suspect that it is a software problem as it is happening only on OS-X as I have booted a live Linux distro and everything works ok hence I drove the conclusion that there might be something related to the system state in OS-X.
    EtreCheck version: 2.1.5 (108)
    Report generated 5 Jan 2015 07:38:02 EET
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Mid 2012) (Verified)
      MacBook Pro - model: MacBookPro9,2
      1 2.9 GHz Intel Core i7 CPU: 2-core
      8 GB RAM Upgradeable
      BANK 0/DIMM0
      4 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 4000
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 5:11:38
    Disk Information: ℹ️
      APPLE HDD TOSHIBA MK7559GSXF disk0 : (750,16 GB)
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) / : 748.93 GB (735.16 GB free)
      Core Storage: disk0s2 749.30 GB Online
      MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    User Login Items: ℹ️
      None
    Internet Plug-ins: ℹ️
      Default Browser: Version: 600 - SDK 10.10
      QuickTime Plugin: Version: 7.7.3
    3rd Party Preference Panes: ℹ️
      None
    Time Machine: ℹ️
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 748.93 GB Disk used: 13.76 GB
      Destinations:
      TimeMachine [Network]
      Total size: 0 B
      Total number of backups: 0
      Oldest backup: -
      Last backup: -
      Size of backup disk: Too small
      Backup size 0 B < (Disk used 13.76 GB X 3)
    Top Processes by CPU: ℹ️
          5% installd
          3% WindowServer
          3% hidd
          3% App Store
          1% storedownloadd
    Top Processes by Memory: ℹ️
      155 MB softwareupdated
      86 MB Finder
      77 MB mds_stores
      77 MB com.apple.WebKit.WebContent
      69 MB installd
    Virtual Memory Information: ℹ️
      2.94 GB Free RAM
      2.97 GB Active RAM
      1.71 GB Inactive RAM
      971 MB Wired RAM
      2.54 GB Page-ins
      0 B Page-outs
    Diagnostics Information: ℹ️
      Jan 5, 2015, 02:27:07 AM Self test - passed

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts 1024 85 percent 20480 1 MB/s 25000 ports KiB/s DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files 4 1000 25 5120 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' '%s (UID %s) is using %s %s' '\nContents of %s\n   -\tmod date: %s\n   -\tchecksum: %s\n%s\n' '\n   ...and %s more line(s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("'"${f[5]}"'",$0,u,q,"'${p[$2]}'");} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[46]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[47]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[48]}'";} ' ' NR==2&&$4<='${p[49]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/^\/[AD]|\/Contents\/.+\/Contents\/|\.prefP/&&/\/(Lib|usr).+\/(.+\.lproj|Contents|Info\.plist|Resources)|\.framework$/ { n++;sub(/\/Info\.plist$/,"");sub(/\/([A-Za-z_]+\.lproj|Contents|Resources|Versions)(\/.+)?/,"");print|"sort|uniq";} END { if(n<1100) print "/System/";} ' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /^\/(Ap|Dev|Inc|Prev)|\.(action|bundle|framework|kext|pkg|prefPane|service|vst)$/d;p;' 's/Pr.+n //p' ' /.kext$/ { s=system("PlistBuddy -c Print\\ :OSBundleRequired "$0"/*/I*|grep -q Sa");if(s==0) $0=$0" S"; };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 23`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("PlistBuddy -c Print "F|getline g) { l++;if(l<=L) f=f"\n   "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n   -\t"T;printf("'"${f[6]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2: \1/p;' ' { gsub(/[()"]/,"",$3);if(!$3) $3="N/A";print $3;} ' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' /[my]: /H;/^ *Lo.+: /{ H;b0'$'\n'' };$b0'$'\n'' d;:0'$'\n'' x;/: [3IU]/!d;s/.+n: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c Print\' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );S1() { printf kMDItemContentTypeTree=com.apple.$1;};S2() { printf 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :'$1' {} \;|uniq';};c2=(com.apple.loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" "`S2 CFBundleDisplayName`" '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' :${p[35]} :Label '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA\(|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' "`S1 bundle`" "`S1 mach-o-dylib`" "`S2 ${p[35]}`" "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-app Safari UserStyleSheetEnabled' -name\ kMDItem${p[35]} );N1=${#c2[@]};for j in {0..14};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files I/O\ errors 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Stylesheet Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching Nets Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in {0..8};do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"|sort`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 $((N3+4));for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 0 $((N1+8)) 71 $((N3+3));D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D13 5 5 69 1;D13 5 54 30 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;for i in {0..3};do A1 0 $((N1+10+i)) 72;B7 12;B4 0 14 31;A4 39 57 70 0;B2 15;B6 14 15 4;C3 $((N3+5+i));done;A1 24 22 29;B7 12;B2 14;A4 39 57 70 0;B2 15;B6 14 15 4;C3 29;B3 4 13 27;A1 24 23 32;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+14)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 50;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;A1 4 3 60;B2 30;A1 4 24 60;B2 31;B6 30 31 4;C3 5;D12 21 56 35 31;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • HELP - Mac Pro Running Very Slow (After Additional RAM Installed)

    I have recently upgraded my Mac Pro (2007) and increased the original memory up to 10 GB 667 MHz DDR2-F8-DIMM.
    I also added an optical disk drive as the original would not play some of the newer DVDs/DVRs. Believe me, I'm not much of a do-it-your-selfer, but was encouraged by How-To DVDs on the net on how to install memory and the optical drive.
    I am using Mac OS 10.5.8 and the original processor is 2 x 3 GHz Dual-Core Intel Xeon.
    Just when I thought all was well, over the last few weeks my MAC has been getting slower and slower. Now, whenever I re-start or shut down, the Mac can take upwards of 5 minutes to come up. It hangs on the blue screen for what seems to be an eternity. Now whenever I use Safari or Firefox, the rainbow wheel spins and spins and this did not happen much before my "upgrade".
    If someone would be kind enough to walk me through or educate me on how/why this is happening, I would be very grateful!
    Sincerely,
    Don

    Did you try with just the new RAM? what was it, and you added.... 4 x2GB?
    Riser A: 2-2-512-512
    Riser B: 2-2-512-512
    The ideal balance is symmetrical sets of four.
    Clone your system and run Disk Warrior, reformat your fastest drive for system, and restore with SuperDuper. Or try starting over with clean install, would be useful as an emergency and backup, especially as it seems possibly overdue for some maintenance.
    Make sure you have 30-40% free on disk drive, and add more if you haven't to separate scratch and data from system.
    Run AHT and something like Memtest or Rember. Memtest you can run 40 concurrently each in its own Terminal window makes it go fast for even 5 cycles.

  • Mac Pro runs very slow, any apps, accessing finder spinning ball

    For the past 3-4 months my Mac Pro is slowing down to about 2 to 3 times slower
    This is across the board no mater if it is an application or opening a finder window
    I made a new volume and a new install , no 3rd party apps just what was on the disk
    and updated to 10.5.8
    Same thing so i don't think it is software related
    I have noticed that my cpu memory maxis out very quickly im not using more than 1 or 2 apps and page outs are 2 to 3 times the page ins,
    last night i can't use the mouse like i used to i have to almost hit the buttons
    to do anything, it's as if is pressure sensitive
    If you like i can send you jpgs of the activity Monitor but i don't know what you want from the Activity Monitor
    I'm worried that it night be a memory problem i have run almost all diagnostic programs all report no problems
    I have a Mac Pro 2.66 dual-core
    with 2 GB memory
    running 10.5.8
    I know that you might ask for more specific info, just tell me what to do
    I need to find out what's going on before something with the hardware causes expensive repair and data loss
    Please i need help
    Thank anybody
    Steve knox

    Hi Steve,
    My first suggestion is to run the Apple Hardware Test DVD, My next would be to download TechTool Deluxe and see what it says.
    The AHT DVD is run the same way as the System Install DVD, just restart holding the C-key with the AHT DVD inserted.
    And here is a link to TechTool Deluxe:
    https://support.apple.com/techtooldeluxe/main?id=dl
    Hope this helps you out.
    Kind regards,
    Peter

  • Copying folders from external hd to mac pro desktop very slow

    Hi everyone,
    I have been experience very slow download times when copying folder from my Lacie 30GB External HD to the desktop of my Mac Pro. For instances, it took 19 minutes to down load a folder with 300MB of contents to my desktop. The Lacie is "Mac OS Extended (Journaled)" I ran Disk Utility on it and "the volume appears to be ok".
    Any ideas on what is going down?
    Thanks...Stan

    I would troubleshoot or dump the LaCie in favor of something else.
    LaCie have been trouble enough in the past with FW ports, power adapters, shorting of cables, running very slow when connected off PCIe SATA using USB/eSATA cases.
    But you never say if this is a FW800 case, or what interface, that is so slow. Resetting FW ports is a troubleshooting trick designed just for LaCie cases. Along with swapping cables and power adapter.
    I would give all your drives a shot of Alsoft Disk Warrior to insure that the directory and file system are okay. And look at the hardware test in DW output for spare blocks vanishing on the drive.
    Using SATA drive, case, and controller of course should be fast and done in seconds, not minutes.
    http://www.macsales.com/firewire

  • Mac Pro running very slow

    HI EVERYONE,
    I HAVE MACPRO INTEL 7 8GB RAM 750GB. I tried to upgrade the system to Mac OS 10.9 maverick and I am having trouble to connect to the home wi if as it is very inconsistent and turns itself on and off every 2/3 minutes.
    Also I guess I am having spinning ***** ball problem as it takes too long to open the files and cursor continue to spin for ages...
    please help...

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. It will be slow, but there should be no beachballing. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • My mac pro is very slow

    What are my best options to improve performance?

    Start off with this:
    http://www.thexlab.com/faqs/performance.html
    ...and post wtih your results.
    Was the answer satisfactory? Future users will gain from this knowledge.

  • My MacBook Pro suddenly became very slow, cursor responding slowely

    My MacBook Pro suddenly became very slow, cursor responding slowely

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD  com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Broadcom|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm "TCP/IP"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`find . -maxdepth 1 -exec basename {} + | while read f; do [[ ("$f" =~ ^\.. && ! "$f" =~ ^\.(adobe|android|bash.+|CFU.+|cache|config|cups|dropbox|DS_Store|font.+|git.+|profile|rnd|sh_.+|ssh|subv.+|Trash(es)?|zprofile|zsh.+)$) || ($(stat -f%f "$f") -ge 32768 && "$f" != Library) ]] && ls -Fd "$f"; done`; Pm "Hidden user files"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Hi, internet on my Mac (OS10.9.1) suddenly became very slow.  Could anyone help me to figure it out the problem?  Thanks.

    Hi internet on my Mac(OS10.9.1) suddenly became very slow.  Could somebody help me?  Thanks.

    Try resetting everything:
    power down everything: modem, router, and computer
    power up each item in turn in the same order: modem, router, and computer. Let each power up completely before moving on to the next.

  • Mac Book Pro suddenly very slow

    MacBook Pro suddenly very slow despite good wifi connection. Should I be scanning for virus? and if so, which product?

    Scanning for a virus will be a waste of time.  To date there are no know virus' affecting Macs. 
    More details might be helpful, but in the interim, look at this comprehensive document:
    https://discussions.apple.com/docs/DOC-3521
    Ciao.

  • IMac became very slow after upgrading to Mavericks

    after upgrading to Mavericks my mac became very slow, i can´t do anything on it without waiting at least15 min. Does someone know what i can do to make it better?

    Mine too, I am really frustrated, since I read all reviews and asked some friends and co-workers about mavericks, they are all happy, but my macbook is almost useless now.
    I tried using Mackeeper, but then apple says it´s a malware, so there´s my solution....
    Anyone with a good answer for this problem ???
    Is there a way to download Snow Leopard and do a clean install ??

  • 2010 Macbook Pro Running Very Slow

    I have a 2010 Macbook pro that is running extremely slow and I ran EtreCheck report but I am not sure how to interpret the results to help solve my issues. Any help or feedback would be greatly appreciated. I have included the Etrecheck report below:
    Problem description:
    Macbook Pro running very slow, web pages won’t load at all or they take a very long time to open.
    EtreCheck version: 2.1.8 (121)
    Report generated March 28, 2015 12:41:50 PM CDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
        MacBook Pro - model: MacBookPro6,2
        1 2.4 GHz Intel Core i5 CPU: 2-core
        4 GB RAM
            BANK 0/DIMM0
                2 GB DDR3 1067 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 462
    Video Information: ℹ️
        NVIDIA GeForce GT 330M - VRAM: 256 MB
            Color LCD 1440 x 900
            spdisplays_display_connector
        Intel HD Graphics - VRAM: 288 MB
            spdisplays_display_connector
    System Software: ℹ️
        Mac OS X 10.6.8 (10K549) - Time since boot: 5:11:41
    Disk Information: ℹ️
        Hitachi HTS545032B9SA02 disk0 : (298.09 GB)
            - (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 319.73 GB (72.45 GB free)
        MATSHITADVD-R   UJ-898
    USB Information: ℹ️
        Apple Internal Memory Card Reader
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Built-in iSight
        Apple Computer, Inc. IR Receiver
    Problem System Launch Daemons: ℹ️
        [not loaded]    org.samba.winbindd.plist [Click for support]
    Launch Agents: ℹ️
        [loaded]    com.google.keystone.agent.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [running]    com.fitbit.galileod.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
        [failed]    com.zeobit.MacKeeper.Helper [Click for support]
    User Login Items: ℹ️
        iTunesHelper    UNKNOWN Hidden (missing value)
        Firefox    Application  (/Applications/Firefox.app)
        Dropbox    Application  (/Applications/Dropbox.app)
        Fitbit Connect Menubar Helper    Application  (/Applications/Fitbit Connect.app/Contents/MacOS/Fitbit Connect Menubar Helper.app)
        LexmarkNetworkServices    Application Hidden (/Library/Application Support/Lexmark/LexmarkNetworkServices.app)
        7600 Series Button Monitor    Application Hidden (/Library/Application Support/Lexmark/7600 Series Scanner.bundle/Contents/SharedSupport/7600 Series Button Monitor.app)
    Internet Plug-ins: ℹ️
        JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.6.6
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 [Click for support]
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.7
    User internet Plug-ins: ℹ️
        Picasa: Version: 1.0 - SDK 10.4 [Click for support]
    Audio Plug-ins: ℹ️
        iSightAudio: Version: 7.6.6
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
    Time Machine: ℹ️
        Time Machine information requires OS X 10.7 "Lion" or later.
    Top Processes by CPU: ℹ️
             4%    WindowServer
             3%    Finder
             2%    hidd
             0%    ps
             0%    Fitbit Connect Menubar Helper
    Top Processes by Memory: ℹ️
        765 MB    firefox
        150 MB    Mail
        116 MB    Finder
        86 MB    mds
        77 MB    WindowServer
    Virtual Memory Information: ℹ️
        577 MB    Free RAM
        1.41 GB    Active RAM
        1.55 GB    Inactive RAM
        621 MB    Wired RAM
        463 MB    Page-ins
        156 KB    Page-outs
    Diagnostics Information: ℹ️
        Mar 28, 2015, 07:28:57 AM    Self test - passed
        Mar 26, 2015, 08:20:29 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/plugin-container_2015-03-26-08 2029_[redacted].crash

    I’ve tried running 10.10 on quite a few different computers with 4GB of RAM and a standard mechanical hard drive and all of them performed worse with Yosemite than they did with Mavericks (10.9). And about a year ago I found that they performed better with Mt Lion (10.8) than Mavericks. Each version of the Mac OS has required more memory than the version that came before it and that means that every couple of years the minimum acceptable RAM is increased. Apple signaled this quietly at the Apple Store - only one computer now ships with 4GB of RAM. (And I can tell you from personal experience that in that configuration it is not fun to use.)
    Bottom line: you need at least 8GB of RAM or an SSD. Both are better. In the meantime run as lean a machine as possible. MacKeeper is a waste of money no matter what anyone might tell you. At best it is not necessary and is a waste of money.

Maybe you are looking for

  • Include in Sapscript

    Hi all, I am working with zebra label printing in sapscript. In the  text editor of the main window all code I have is : /E ETIKETT                                                                       /:   PROTECT                                    

  • Permission error in Aperture

    Here is the whole story: - I added my MacBook Pro as my main computer, as my older MacPro was getting long in the tooth. But, since it has some 10TB internal storage, I made a "target disk" so I can access all that content. - Migration Assistant did

  • PO output: XML as default output medium

    Hello experts, We want to send XML output to a legacy system and we have 4 output mediums on our portal for PO's: Print Fax Email XML Is it possible in configuration to make XML the default output medium but still allow the other 3 output mediums to

  • White BlackBerry Z30? When will it be available?

    Just as described in the Subject, when will the "WHITE" BlackBerry Z30 be available in Canada? From BELL, Rogers and/or Telus? Thank You, 

  • Passwords in SU10

    Hi All, If we create users in su10, how to know the passwords generated automatically? Can some one tell me. Regards, Sandhya