My Mac Pro is getting slower and slower

I have an Mac Pro early 2009 version which is getting slower and slower. Startup time is about 3 minutes. How can I fix this?
Thank you.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutesafter the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of diagnostic report, such as hang logs — they're very long and not helpful.

Similar Messages

  • Mac book pro getting slower and slower

    My 3 tear old mac book pro is getting slower, and slower and slower?

    How large is your HD and how much space do you have left?
    Check out the following & do the necessary: 
    User Tip:  Why is my computer slow?
    What to do when your computer is too slow
    Speeding up your Mac

  • Macbook Pro getting slower and slower, freezing all the time

    Hi,
    My early 2011 Macbook Pro is gettin slower and slower, and I'm pretty sure Mavericks only worsened the condition. This is my report, can someone help me on why this is happening?
    Hardware Information:
              MacBook Pro (13-inch, Early 2011)
              MacBook Pro - model: MacBookPro8,1
              1 2.3 GHz Intel Core i5 CPU: 2 cores
              4 GB RAM
    Video Information:
              Intel HD Graphics 3000 - VRAM: 384 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    Startup Items:
              FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 1 day 1:28:0
    Disk Information:
              TOSHIBA MK5059GSXP disk0 : (500,11 GB)
                        EFI (disk0s1) <not mounted>: 209,7 MB
                        Macintosh HD (disk0s2) /: 499,25 GB (54,63 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-898 
    USB Information:
              JMicron USB to ATA/ATAPI bridge 500,11 GB
                        EFI (disk2s1) <not mounted>: 209,7 MB
                        Filmes (disk2s2) /Volumes/Filmes: 499,76 GB (330,53 GB free)
              Apple Computer, Inc. IR Receiver
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Inc. iPhone
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Inc. BRCM2070 Hub
                        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Kernel Extensions:
              de.novamedia.driver.NMSmartplugSCSIDevice          (1.0.1)
              com.Cycling74.driver.Soundflower          (1.5.1)
              com.bresink.driver.BRESINKx86Monitoring          (8.0)
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
              [loaded] com.microsoft.office.licensing.helper.plist
              [loaded] com.oracle.java.Helper-Tool.plist
    Launch Agents:
              [failed] com.brother.LOGINserver.plist
              [loaded] com.oracle.java.Java-Updater.plist
              [loaded] de.novamedia.VodafoneDeviceObserver.plist
    User Launch Agents:
              [failed] com.akamai.single-user-client.plist
              [loaded] com.facebook.videochat.[redacted].plist
              [failed] com.google.GoogleContactSyncAgent.plist
              [loaded] com.macpaw.CleanMyMac.helperTool.plist
              [loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist
              [loaded] com.spotify.webhelper.plist
              [loaded] com.valvesoftware.steamclean.plist
    User Login Items:
              uHD-Agent
              GrowlHelperApp
              Alfred
              uTorrent
              Dropbox
              iShutdown
              HyperDock Helper
              Assistente de gestor de conteúdo
    3rd Party Preference Panes:
              Akamai NetSession Preferences
              Fan Control
              Flash Player
              Flip4Mac WMV
              Growl
              HyperDock
              Java
    Internet Plug-ins::
              DirectorShockwave: Version: 11.5.9r620
              o1dbrowserplugin: Version: 4.9.1.16010
              Unity Web Player: Version: UnityPlayer version 3.4.2f3 - SDK 10.5
              Default Browser: Version: 537 - SDK 10.9
              Flip4Mac WMV Plugin: Version: 2.3.8.1
              RealPlayer Plugin: Version: Unknown
              Silverlight: Version: 5.1.20913.0 - SDK 10.6
              FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
              Flash Player: Version: 11.9.900.170 - SDK 10.6
              QuickTime Plugin: Version: 7.7.3
              googletalkbrowserplugin: Version: 4.9.1.16010
              npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5
              iPhotoPhotocast: Version: 7.0 - SDK 10.8
              SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
              JavaAppletPlugin: Version: Java 7 Update 45
    Bad Fonts:
              None
    Old applications:
              Content Manager Assistant:          Version: 1.10.4086.78 - SDK 10.5
                        /Users/duarte_cunharosa/Applications/CMA.app
              Content Manager Assistant:          Version: 1.10.4086.78 - SDK 10.5
                        /Applications/CMA.app
              FacebookVideoCalling:          Version: 1.2.0.157 - SDK 10.5
                        /Users/duarte_cunharosa/Library/Application Support/Facebook/video/1.2.0.158/FacebookVideoCalling.app
              Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Alerts Daemon.app
              Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4
                        /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
              Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
              Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app
              Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
              Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
              Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Microsoft Document Connection.app
              Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4
                        /Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
              Microsoft Excel:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Microsoft Excel.app
              Microsoft Graph:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Graph.app
              Microsoft Language Register:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
              Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
              Microsoft Outlook:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Microsoft Outlook.app
              Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Microsoft PowerPoint.app
              Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4
                        /Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
              Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
              Microsoft Word:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Microsoft Word.app
              Miro Video Converter:          Version: 2.6 - SDK 10.0
                        /Applications/Miro Video Converter.app
              My Day:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/My Day.app
              Open XML for Excel:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Open XML for Excel.app
              Plants vs:          Version: 1.0.40 - SDK 10.5
                        /Applications/Plants vs. Zombies.app
              RipIt:          Version: 1.6.2 - SDK 10.5
                        /Applications/RipIt.app
              SLLauncher:          Version: 1.0 - SDK 10.5
                        /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
              Solver:          Version: 1.0 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
              SyncServicesAgent:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
              UPlayBrowser:          Version: 1.0.1.23853 - SDK 10.5
                        /Library/Application Support/Ubisoft/Assassin's Creed Brotherhood/UPlayBrowser.app
    Time Machine:
              Mobile backups: ON
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 464.96 GB Disk used: 414.09 GB
              Destinations:
                        Time Machine [Local] (Last used)
                        Total size: 698.32 GB
                        Total number of backups: 3
                        Oldest backup: 2013-12-20 18:10:54 +0000
                        Last backup: 2013-12-22 19:52:17 +0000
                        Size of backup disk: Too small
                                  Backup size 698.32 GB < (Disk used 414.09 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   9%          Transmission
                   4%          Dropbox
                   2%          WindowServer
                   2%          Dock
                   1%          Google Chrome
    Top Processes by Memory:
              123 MB          Google Chrome
              119 MB          iTunes
              102 MB          Dropbox
              87 MB          Google Chrome Helper
              66 MB          Finder
    Virtual Memory Statistics:
              148 MB          Free RAM
              995 MB          Active RAM
              859 MB          Inactive RAM
              1.03 GB          Wired RAM
              7.80 GB          Page-ins
              4.84 GB          Page-outs

    If you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic  test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on general principle, not because of anything suggested in this comment. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help identify which such modifications you've installed, as well as some other aspects of the configuration that may be related to the problem.
    Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: In each of two steps, you copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is copy; paste; paste again. That's all there is to it. Details follow.
    You may have started the computer in "safe" mode. Preferably, these steps should be taken while booted in “normal” mode. If the system is now running in safe mode and is bootable in normal mode, reboot as usual. If it only boots in safe mode, use that.
    Below are instructions to enter UNIX shell commands. They do nothing but produce human-readable output. However, you need to think carefully before running any program at the behest of a stranger on a public message board. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. If you can't satisfy yourself that these instructions are safe, don't follow them.
    The commands will line-wrap or scroll in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
    If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. Step 1 should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click anywhere in the line of text below on this page to select it:
    PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && printf '\n%s:\n\n%s\n' "$1" "$o"; }; PC () { o=$(grep [^[:blank:]] "$2"); PR "$1"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; PN () { [[ $o -eq 0 ]] || printf "\n%s: %s\n" "$1" $o; }; { system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=$(system_profiler SPDiagnosticsDataType | sed '5,6!d'); fgrep -q P <<< "$o" && o=; PR "POST"; o=$(( $(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256 )); [[ $o -gt 1024 ]] && printf "\nPageouts: %s MiB\n" $o; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; PC "cron configuration" /e*/cron*; o=$(crontab -l | grep [^[:blank:]]); PR "User cron tasks"; PC "Global launchd configuration" /e*/lau*; PC "Per-user launchd configuration" ~/.lau*; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l); PN "Restricted user files"; cd; o=$(find -L /S*/L*/E* {,/}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist") || ID=; ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; o=$(system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l); PN "Font problems"; for d in {,/}L*/{La,Priv,Sta}*; do o=$(ls -A "$d"); PR "$d"; done; } 2> /dev/null | pbcopy; echo $'\nStep 1 done'
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    The command may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "Step 1 done" to appear below what you entered. The output of the command will beautomatically copied to the Clipboard. All you have to do is paste into a reply to this message by pressing command-Vagain. Please don't copy anything from the Terminal window. No typing is involved in this step.
    Step 2 
    Remember that you must be logged in as an administrator for this step. Do as in Step 1 with this line:
    PR () { [[ "$o" ]] && printf '\n%s:\n\n%s\n' "$1" "$o"; }; { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l | grep [^[:blank:]]); PR "Root cron tasks"; o=$(syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2>&- | pbcopy; echo $'\nStep 2 done'
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    You can then quit Terminal. Please note:
    ☞ Steps 1 and 2 are all copy-and-paste — type only your login password when prompted.
    ☞ When you type your password, you won't see what you're typing.
    ☞ If you don’t have a password, set one before taking Step 2. If that’s not possible, skip the step.
    ☞ Step 2 might not produce any output, in which case the Clipboard will be empty. Step 1 will always produce something.
    ☞ The commands don't change anything, and merely running them will do neither good nor harm.
    ☞ Remember to post the output. It's already in the Clipboard. You don't have to copy it. Just paste into a reply    
    ☞ If any personal information, such as your name or email address, appears in the output of either command, anonymize it before posting. Usually that won't be necessary.
    ☞ Don't post the contents of the Terminal window.
    ☞ Don't paste the output of Step 1 into the Terminal window. Paste it into a reply.

  • Why my Mac Pro hard drive noise and too slow?

    Why my Mac Pro hard drive noise and too slow? Totally 8 gb speed system but now very slow . Please give some suggestions

    Another thing you can do in Lion (and ML) is click on the "Info" button in Disk Utility to get the SMART status of the drive.It's more detailed now than it used to be and it might tell you if something is wrong.
    A lot can go wrong with a hard drive which is why I tend to point people to the downloads section of the following web site:
    http://scsc-online.com
    They have a free hard drive troublleshooting download book there. I reccommend people download that before asking questionis because there are tons of problems that can act like hard drive problems when there's nothing wrong with the system at all. For example, how full is the drive? How many applications are running? What's the status of Spotlight indexing? How many apps are you running? How much memory do you have?
    I could probably think up 20 or 30 more if needed.

  • My MacBook Pro (2010) running Mountain Lion is getting slower and slower. How do I fix the orphan files?

    My 2010 Macbook pro is running slower and slower. I went to the Genius Bar about eight months ago, and they botted up from the disk, and let it go through and find what  its process to find and fix what I think were "orphan" files. I cannot remember what they did, but when they did it, the speed on my Macbook picked up considerably.
    I have since upgraded to Mountain Lion, but these problems do not seem related to that. My 500 GB HDD is about 80% full.

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    Otherwise, take the steps below when you notice the problem.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 2
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • My Mac Book air gets slower and slower. Is there any software or application to increase perfromance ?

    My Mac Book air gets slower and slower. Is there any software or application to increase perfromance ?

    jean-michel from France wrote:
    My Mac Book air gets slower and slower. Is there any software or application to increase perfromance ?
    Try this program to clean and optimize your Mac:
    http://www.macupdate.com/app/mac/11582/onyx
    It works for me! Air i7.

  • MacBook Pro boot or shutdown getting slower and slower, is how is it, how to resolve?

    MacBook Pro boot or shutdown getting slower and slower, is how is it, how to resolve?
    MacBook Pro开机或关机越来越慢,是怎么回事,如何解决?

    Open your disk utility and verify your disk permissions - if errors are found - repair them and restart your macbook when it's done the repairs....
    see if that sorts it out for you...
    good luck

  • My mac pro is getting very slow

    my mac pro is getting very slow

    Kappy's Personal Suggestions for OS X Maintenance
    For disk repairs use Disk Utility.  For situations DU cannot handle the best third-party utilities are: Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation.  TechTool Pro 4.5.1 or higher are Intel Mac compatible;  Drive Genius is similar to TechTool Pro in terms of the various repair services provided.  Versions 1.5.1 or later are Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard.  These utilities have limited or no functionality with Snow Leopard and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
    I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc.  Other utilities are also available such as Onyx, Leopard Cache Cleaner, CockTail, and Xupport, for example.
    For emergency repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard.
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    Backuplist
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    iBackup
    JaBack
    Silver Keeper
    MimMac
    Retrospect
    Super Flexible File Synchronizer
    SuperDuper!
    Synchronize Pro! X
    SyncTwoFolders
    Synk Pro
    Synk Standard
    Tri-Backup
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Additional suggestions will be found in Mac Maintenance Quick Assist.
    Referenced software can be found at CNet Downloads or MacUpdate.

  • Is ther a way to speed up a Mac? Mine has gotten slower and slower over time.  When memory comes close to full would that have an effect on performance? Is there a way to determine unused programs/software to remove and free space?

    Is there a way to speed up a Mac (similar to de-fragging on a PC)? Mine has gotten slower and slower over time. 
    When memory/disc comes close to full would that have an effect on performance? How should I determine what programs/software to remove and free space?

    Things You Can Do To Resolve Slow Downs
    If your computer seems to be running slower here are some things you can do:
    Start with visits to:     OS X Maintenance - MacAttorney;
                                      The X Lab: The X-FAQs;
                                      The Safe Mac » Mac Performance Guide;
                                      The Safe Mac » The myth of the dirty Mac;
                                      Mac maintenance Quick Assist.
    Boot into Safe Mode then repair your hard drive and permissions:
    Repair the Hard Drive and Permissions Pre-Lion
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    Repair the Hard Drive - Lion/Mountain Lion/Mavericks
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Restart your computer normally and see if this has helped any. Next do some maintenance:
    For situations Disk Utility cannot handle the best third-party utility is Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
    Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
    Suggestions for OS X Maintenance
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
    Helpful Links Regarding Malware Protection
    An excellent link to read is Tom Reed's Mac Malware Guide.
    Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
    See these Apple articles:
              Mac OS X Snow Leopard and malware detection
              OS X Lion- Protect your Mac from malware
              OS X Mountain Lion- Protect your Mac from malware
              About file quarantine in OS X
    If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
    Troubleshooting Applications
    I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
    If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
    Basic Backup
    For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
    1. A Time Machine preferences panel as part of System Preferences;
    2. A Time Machine application located in the Applications folder. It is
        used to manage backups and to restore backups. Time Machine
        requires a backup drive that is at least twice the capacity of the
        drive being backed up.
    Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
      1. Carbon Copy Cloner
      2. Get Backup
      3. Deja Vu
      4. SuperDuper!
      5. Synk Pro
      6. Tri-Backup
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
    Referenced software can be found at MacUpdate.
    Additional Hints
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
    Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
    Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
    Check for applications that may be hogging the CPU:
    Pre-Mavericks
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Mavericks and later
    Open Activity Monitor in the Utilities folder.  Select All Processes from the View menu.  Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

  • My mac pro seems to be running slower today than it was friday

    my mac pro seems to be running slower today than it was friday, i purchased it used an don't have disc or password

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    It is not safe to use a computer with software installed by a previous owner.
    1a. If you don't own another Mac
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    Some models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you may not be able to reinstall 10.6 even from the original discs, and Internet Recovery may not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
    1b. If you do own another Mac
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    2. Partition and install OS X
    If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
    Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In thePartition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
    3. Other issues
    If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

  • My Mac Is Gettins Slower And Slower...

    Hi guys,
    I think that my mac is getting slower and slower. This is my first mac, I've got MacBook Pro for 4 months with 2.5Ghz Intel Core 2 Duo + 4GB of RAM. For example, after opening Safari I have to wait 15 second until I can change address or anything...maybe 2 months ago it was 2 seconds. I've tried delete cookies and history but nothing has changed. Then I was looking for some disk defragmentation of something similar (I've done this every month on win...) but I didn't find anything.
    Any suggestions appreciated.
    Thanks,
    Mike

    Hi, and welcome to the forums.
    OSX is quite different from Windoze -- most users don't need to defrag, ever.
    Use the search box and search for "slow" or "sluggish" -- you'll find lots of similar posts and many suggestions. You'll see many different problems with various solutions.
    There are many possibilities -- 3rd party apps, hardware trouble of many types, messed-up permissions, corrupted file system, etc.
    A few things to start with:
    How full is your disk? You should have at least 10% free, preferably 20% or more.
    Have you upgraded OSX since you got your Mac? Did the trouble start after that?
    Have you installed or removed any 3rd-party apps?
    Have you installed or removed any peripherals?
    Have you used Activity Monitor to see if a particular application or function is hogging your cpu?

  • Win7 on parallels getting slower and slower

    Hi,
    I installed a win7 system thru Parallels on my mac mini (mid 2010), 4G ram. It works fine and fast at first, but now, 3 months after, the win is getting slower and slower.
    I checked the task manager in win7, the cpu usage is lower than 40% at most time, and the used memory is around 700~800M, I assigned 1G to parallels.
    Any idea about this? Or I have to reinstall the win7 because it just a WINDOWS???
    Cheers

    If you're using up to 800MB on a 1GB system, Windows has no headroom for the tasks you're doing with it. It has to do a lot of disk swapping to maintain memory availability. Assign it 2GB RAM, and if you only have a 4GB Mac consider upgrading to 8GB so you can keep the VM running whenever you want it. I give Windows 7 4GB and 4 cores on my Mac Pro, and it's fast enough to do video editing on the types of files (MPEG2 with AC3 audio) that Mac OS software doesn't fully support.

  • My iMac is getting slower and slower

    My Mac (3.2GHz Intel Core i3 4GB Memory) is about 4 years old and has been getting slower and slower over the last 5 or 6 months. An earlier post recommended using 'Etracheck' which I have done and attached the information below. I think I may have a Ram issue but I would be grateful for any comments.
    Thanks
    Hardware Information: ℹ️
      iMac (27-inch, Mid 2010) (Verified)
      iMac - model: iMac11,3
      1 3.2 GHz Intel Core i3 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 0/DIMM1
      empty empty empty empty
      BANK 1/DIMM1
      empty empty empty empty
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      ATI Radeon HD 5670 - VRAM: 512 MB
      iMac 2560 x 1440
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 6 days 16:10:12
    Disk Information: ℹ️
      SAMSUNG HD103SJ disk0 : (1 TB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 999.35 GB (629.98 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      OPTIARC DVD RW AD-5680H 
    USB Information: ℹ️
      Canon MG4200 series
      Primax USB OPTICAL MOUSE
      Apple Internal Memory Card Reader
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Western Digital My Passport 070A 999.5 GB
      S.M.A.R.T. Status: Verified
      EFI (disk4s1) <not mounted> : 210 MB
      Backup (disk4s2) <not mounted> : 999.16 GB
      Apple Computer, Inc. IR Receiver
      Apple Inc. Built-in iSight
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.67) Support
      [not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.67) Support
    Startup Items: ℹ️
      ChmodBPF: Path: /Library/StartupItems/ChmodBPF
      Startup items are obsolete and will not work in future versions of OS X
    Problem System Launch Agents: ℹ️
      [failed] com.apple.CallHistoryPluginHelper.plist
      [failed] com.apple.CallHistorySyncHelper.plist
      [failed] com.apple.coreservices.appleid.authentication.plist
      [failed] com.apple.icloud.fmfd.plist
      [failed] com.apple.scopedbookmarkagent.xpc.plist
      [failed] com.apple.telephonyutilities.callservicesd.plist
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.awdd.plist
      [failed] com.apple.ctkd.plist
      [failed] com.apple.GSSCred.plist
      [failed] com.apple.icloud.findmydeviced.plist
      [failed] com.apple.ifdreader.plist
      [failed] com.apple.nehelper.plist
      [failed] com.apple.periodic-weekly.plist
      [failed] com.apple.tccd.system.plist
      [failed] com.apple.wdhelper.plist
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [invalid?] com.oracle.java.Java-Updater.plist Support
      [running] com.rim.BBLaunchAgent.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.ea.origin.ESHelper.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [invalid?] com.oracle.java.Helper-Tool.plist Support
      [running] com.rim.BBDaemon.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.google.keystone.agent.plist Support
    User Login Items: ℹ️
      BlackBerry Device Manager ApplicationHidden (/Library/Application Support/BlackBerry/BlackBerry Device Manager.app)
    Internet Plug-ins: ℹ️
      Unity Web Player: Version: UnityPlayer version 4.1.2f1 Support
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
      AdobePDFViewerNPAPI: Version: 10.1.12 Support
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      iPhotoPhotocast: Version: 7.0 - SDK 10.8
      SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
      AdobePDFViewer: Version: 10.1.12 Support
      EPPEX Plugin: Version: 10.0 Support
    User Internet Plug-ins: ℹ️
      BlueStacks Install Detector: Version: Unknown
      Picasa: Version: 1.0 - SDK 10.4 Support
    Safari Extensions: ℹ️
      Slick Savings
      Searchme
      Amazon Shopping Assistant
      Ebay Shopping Assistant
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Flip4Mac WMV  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: OFF
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 999.35 GB Disk used: 369.37 GB
      Destinations:
      Backup [Local]
      Total size: 0 B
      Total number of backups: 0
      Oldest backup: -
      Last backup: -
      Size of backup disk: Too small
      Backup size 0 B < (Disk used 369.37 GB X 3)
    Top Processes by CPU: ℹ️
          3% WindowServer
          0% AppleSpell
          0% BBLaunchAgent
          0% coreservicesd
          0% Microsoft Word
    Top Processes by Memory: ℹ️
      180 MB Mail
      176 MB iTunes
      64 MB softwareupdated
      52 MB Safari
      47 MB mds_stores
    Virtual Memory Information: ℹ️
      35 MB Free RAM
      824 MB Active RAM
      808 MB Inactive RAM
      652 MB Wired RAM
      19.96 GB Page-ins
      1.41 GB Page-outs

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
    Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
    CLEAR THE WORD "Starting" FROM THE TEXT FIELD
    so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

  • HT201541 Our Mac-Mini has gotten slower and slower. Is there a utility that would help speed it up?

    Our 4 plus year old Mac-Mini has gotten slower and slower.  Is there a utility that would help speed it up or is there another?

    Hello! I’ve offered the steps below to similar posts in the past and they helped out getting to the solution (or at least find the cause). I suggest them to you too in this case. It will take you about 30 minutes or less to do these, depending on how bad the problem on your Mac is.
    The goal here is to boot your Mac to the so-called Recovery partition where you’ll have a chance to repair the disk and the disk permissions using the Disk Utility and Password Utility. This might solve your issue and even if it doesn’t- it’s still a decent maintenance step to perform. These steps won’t erase your data or reinstall your Mac in any way if you follow instructions carefully.
    Here’s how:
    1/ Make sure your computer is completely shut down.
    2/ You’ll have to be quick next: Press the Mac’s power button. As soon as you either hear the loud chime, or see the display light up - usually after a second or 2 - on your keyboard press [cmd] + [r] Keep these keys on your keyboard pressed until you either see an Apple Logo with a loading bar or a spinning gear.
    After a few minutes, you’ll be presented with a Utilities screen. This is the Recovery partition. If this step is already giving you problems, try using a USB-keyboard. It doesn’t have to be an Apple-keyboard. If you have a Windows-tailored keyboard laying around, use the “Windows-flag” key in stead of the [cmd]-key and it should also work.
    3/ Choose Disk Utility and click [continue]
    Disk Utility will display your computer’s harddrive in the left column. The default name for it is “Macintosh HD” and is usually the second one from the top. Click on it and click on the [verify disk] button. This will check your “Macintosh HD” harddrive partition for errors. If found, click [repair disk]  unless you have a Fusion drive in your Mac and it says [fix] instead of [repair disk] please tell us before you continue! For a screenshot of what I mean, check this article from Apple: http://support.apple.com/en-us/HT202574
    4/ Once done with the verifying or repairing of your “Macintosh HD” click [repair disk permissions]
    This will check your partition for permissions errors. A common myth about this feature is that it will fix all permissions issues on your Mac, which is not true, but it will fix most systemwide issues. Also, here is a list of error messages that you can safely ignore if they pop up:
    http://support.apple.com/en-us/HT203172
    5/ Lastly we shall do a permissions/Access Control List repair on specifically your user’s home folder with a somewhat hidden tool in the Recovery partition. Close Disk Utility and find the menu called “utilities” in the top left corner of your computer’s display. It’s in between the menus “edit” and “window” Don’t be confused with the menu called “os x utilities” 
    Choose Terminal. A somewhat old-fashioned looking window will pop up, waiting for a text command from you. This is the Terminal.
    After the # type: resetpassword and press return. Note that there is no space between ‘reset’ and ‘password’ 
    What you’ll see next is an rectangular window that gives you the option to reset passwords. We are not going to that, however. Instead, click on “Macintosh HD” at the top. In the pull-down menu below that, choose your user's accountname. Skip all the rest and at the very bottom click the [reset]-button.
    A spinning gear will appear and may stay on for a second or several minutes. It’s hard to predict exactly how long.
    If you have multiple users on your Mac, I advise you to repeat this step for all your users.
    We’re ready to reboot your Mac now. Click on the Apple Menu and choose “startup disk” Choose to boot from “Macintosh HD” Please let us know if this solved your issue, or if the steps above did not work, or could not be performed for some reason.
    If they worked I suggest you do these steps everytime your Mac becomes slow.

  • Firefox gets slower and slower over time.

    I have been using firefox for some time, Like it better than Safari generally, but I've noticed (and it has gotten worse with 3.6.x) that if you leave FF running for extended periods of time it gets slower and slower, does not seem to matter if add-ons are installed or not, and it gets REALLY bad after going in and out of flash based apps/games a couple times. It is not just a mac problem as this behaviour also happens on windows xp or newer, but windows OS needs to be rebooted daily anyways so most people won't notice.

    Proceed with [[Basic Troubleshooting]] first of all.
    You could also try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.

Maybe you are looking for

  • Error while trying to move file using File adapter

    Hi, I am trying one scenario to move file from one remote folder to other using file adapter as mentioned in heading 4.5.11.1 at http://download.oracle.com/docs/cd/E21764_01/integration.1111/e10231/adptr_file.htm#CHDGFAAB. But I am receiving the belo

  • Document type SK

    Hi, the  document type AB is used for cash payment(FBCJ) and  reversal so its create confusion. As per requirement if we use document type SK for cash payment(FBCJ) then its reversal document will be AB,this is the scenario . Please advise me Thanks,

  • Planning EPMServer0 keeps crashing

    Hi, We raised a SR over 3 weeks ago and have been trying to identify why the EPMServer0 crashes every 3 to 4 days and we need to restart it. The memory is set as -Xms3072m –Xmx8160m Monitoring the server it generally stays with the min level. We neve

  • PLEASE HELP ME!!! DVD MENU

    Ok, Bare with me I'll try to explain as best as I can. I want to play the DVD menu to 1 entire song. I changed the menu duration in the preferences to 4min 28 sec... the length of the song. I added my menu video clip from FCP and set it to the same l

  • Blackberry 8520 wont sync previous dates in calander

    Hi there, It is the 23rd June as I post this. I dont know why an appointment I entered on the Blackberry last week  wont sync in the usual way to outlook. The appointment was on 21st June. Also an appointment I entered on Outlook calander last week,