My mac pro is only on os 10.5.8 can i bring it into an apple store to get it fully updated ?

my macbook pro was bought of someone from ebay and i was given all the papaer work for it all ad everything but its only on mac os 10.5.8 and i cant find a way to fully update it too the 10.9 latest os x version of software and i wanted to know if i would be able to bring it in to an apple store an get it update there for little cost ???

First you would need to meet these requirements:
To install Mavericks, you need one of these Macs:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later),
MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
Your Mac also needs:
OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
2 GB or more of memory
8 GB or more of available space
Genius bar could help you over the counter
Genius reservation http://www.apple.com/retail/geniusbar/
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard

Similar Messages

Is it possible to upgrade the Mac Mini's graphics card if I bring it into the Apple Store?

I wanted to know if I bring in a Mac mini to the Apple Store, can they upgrade the mac to a AMD Radeon 6330M? If not, what can I do to play games a bit better?

Nope, sorry, I believe it's part of the Logic board, not much you can do, but how much RAM do you have?

"system overload" in logic pro 8 on my Mac Pro with only three tracks

I am running Logic Pro 8, on a 2.66 Quad Core Mac Pro w/ only 1GB of RAM. I have not had the money for the much needed ram upgrade, yet.
The day before yesterday I opened a project I had opened many times, with only three tracks - two audio and a midi synth with only a few notes. These tracks are fairly well plugin-ed up, but this Mac Pro has always eaten them up, no problems. When I tried to play the project, I got system overloads every 2 seconds, rather precisely actually. My CPU usage reads low in logic and with iStat, but suddenly it peaks to 100% on my third core and I get the system overload.
I had my buffer size at 128, so I switched it to 1024, it worked, and then I switched it back again and everything worked like it used to!
But now I have to go through this slightly illogical little procedure everytime I open a project. I have read threads here about this subject before, back I cant seem to apply them / understand them in relation to my particular situation.
any ideas?

Join the club...wait for them to patch/update it.
I've tried the various work arounds, sometimes they work temporarily, sometimes not at all.
For the overloads the most reliable "work around" is to select each track, open the VI/FX modules associated with that track, then close them, go to the next track and repeat the process. OR, if you know all the modules (VI/FX) you're using, just open each one. This will "initialize" their existance BEFORE the audio engine hits them in playback.
My guess is LP8 tries to reduce it's memory foot print and does NOT initialize all the VI/FX in a saved project that is just opened until it actually needs to use them -- a good idea one would think. However, when you do your playback and it hits the VI/FX for the first time (after you just opened your saved project) it appears the audio engine stalls waiting for the VI/FX to initialize the 1st time around and hence the overloads error. Obviously I can't prove this since I don't have access to the code, but I'm a developer and this would be my logical guess based on the evidence at hand.
I can reproduce the problem consistently:
1. Start LP8
2. Open existing project with 3 tracks (staggered to start a different times) with different VI on each track
3. Have 3 buses with a different FX on each bus
4. Do nothing other than hit Play
Overload when it hits start of 1st track VI, stop, restart, overloads when it hits start point of 2nd track VI, stop restart, overloads when it hits start point of 3rd track.
Why wasn't something this obvious caught in testing? Good question.
Rob.
Message was edited by: Rob A.

When I power up my Mac-Pro I only get a flashing file folder with a ? inside the folder. I suspect my hard drive is maxed to capacity can anyone help me as to what I should do?

When I power up my Mac-Pro I only get a flashing file folder with a ? inside the folder. I suspect my hard drive is maxed to capacity can anyone help me as to what I should do?

Whatever the problem is you no longer have a bootable system. You need to try reinstalling OS X.
Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Slow wireless speeds on Mac Pro, but only downloads???

I have an "early 2009" quad-core Mac Pro. I also have a Macbook Pro that's a couple of years old. I'm running speedtest.net, with the laptop sitting on top of the Pro. My wireless setup is a several-year-old Airport Extreme base station hard-wired to the Verizon router.
My FiOS speed is 25/15, and that is generally what the laptop gets. When I first started this saga, the Mac Pro was getting about 4/12 on wireless (it is just as fast as the laptop if I hard-wire it). The laptop is also able to see about twice as many wireless networks as the Pro.
I have had the Pro in to the Genius Bar 3 times over the last couple of weeks. I give them credit for trying really hard; they say it actually has better wireless speeds in their store than one of their own Mac Pros, so they are chasing a problem they can't reproduce. The main thing they have done so far is replace the Airport card, which improved my results to about 9/17, but here we seem to be stuck. At this point the store has done everything they can think of, and all they can offer is to give me the names of some Apple certified techs who can come out to my home office (for a fee, of course) and try to trouble-shoot it here.
What I find most perplexing about this is that it's only download speed. I would think if there was some sort of interference, which is what they are thinking, it would affect both. And it would affect the laptop too.
I have a brand-new Airport base station that I will try setting up, but I don't have high hopes. I can also try upgrading to Snow Leopard, but that is a big time sink that I'm not quite ready for yet (I like to do a full install when I upgrade).
Does anyone have any other suggestions or tips on where else to research this?
Thanks in advance!

I saw this at a site where they were using DFS with Server 2003. When the few Mac's they had connected to the actual server and uploaded the file it was okay. But when it was sending the file via the \\DFS_node\share_name the Mac took heaps longer for the same file. Watching the Activity Monitor > Network monitor you could see gaps with the data transfer, as if there was some pausing between packets. A pcap showed that there was constant DNS requests coming from the Mac, even after the connection to the share was made. The same wasn't happening when the connection via SMB was directly to the actual file server. As there was only a few Mac on site they left it with the direct connection but were getting an MS specialist in to look at it. Never heard what happened with that one but you may want to try monitoring the packet transfer to see if the data movement is contstant or breaking. I'd also recommend getting Wireshark to monitor the transfer. You can compare upload to download and maybe even the transfer from the Mac to an MS workgroup share.

My mac pro's power adapter has something wrong, sometime can work, sometime dosen't, can you fix it?

my mac pro's power adapter has something wrong, sometime can work, sometime dosen't, can you fix it? i brought this mac pro last year.

No, we can't fix it. Probably live half the world away from you and don't have telephatic powers....
But you can try yourself. First, make sure the connector is absolutely clean. The gold pins on the cable end should all move freely and fully extend out. The gold pads on the Mac connector should be spotlessly clean, and the area around them, where the metal ring on the cable goes in, should be free of any debris that may impede full seating and contact.
Next, the cable on the power brick should be in good condition, without kinking or fraying. If there is any damage, only solution is replacement, it is not serviceable.
Lastly, make sure the battery is ok. Go to the About This Mac item in the Apple menu, do More Info... / System Report... and select Power on the left column. In the Battery Information, Health section, make sure the Condition is Normal. Else, will need replacement.

I have a Mac Pro Intel Xeon 3.2 Ghz Quad core (mid 2012) using OSX 10.7.5) and cannot get iDVD to run.

I have a Mac Pro Intel Xeon 3.2 Ghz Quad core (mid 2012) using OSX 10.7.5) and cannot get iDVD to run. I tried 7.0.4 and 7.1.2, both from Apple software update and both crash during "loading themes". I am reluctant to upgrade OSX from 10.7.5 because I do not want to loose Final Cut Express 4.0.1. Apple Care no longer supports iDVD. I want a version if iDVD that supports Chapter markers as in iDVD 7.?.? that i used with my old (now deceased) Apple Power PC Mac Pro.

iDVD 7 should work fine with 10.7.5. Try this basic troubleshooting fix:
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete IDVD'S cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iDVD folder.
3 - launch IDVD and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
OT

I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!

I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!

Hi there Rlong50,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
-Griff W.

Trying to download CS6 on my mac pro. when i click on Download, under my orders, it brings up an error page: JRun Servlet error, 413 Header Length to Large. It's been doing this each time I've tried that last few days. What can I do to download this?

Trying to download CS6 on my mac pro. when i click on Download, under my orders, it brings up an error page: JRun Servlet error, 413 Header Length to Large. It's been doing this each time I've tried that last few days. What can I do to download this?

clear your adobe.com cookies or use a different browser.

I have Mac Pro 2007, which have no bluetooth hardware. What should I do to use Apple wireless keyboard and magic mouse??? Can 'third party's internal bluetooth card' be used for this purpose? Help please...

I have Mac Pro 2007, which have no bluetooth hardware. What should I do to use Apple wireless keyboard and magic mouse??? Can 'third party's internal bluetooth card' be used for this purpose? Help me please...

You can find the Apple Bluetooth card on eBay for as little ten dollars (says its for the 2008 model Mac Pro, not sure about the 2007).
http://www.ebay.com/itm/Bluetooth-Board-iMac-and-Mac-Pro-922-8233-922-8233-/1208 49278570
Here is a link to a full explanation of the card and how to install it. Part numbers may differ a bit as that is an old article and newer models have come out.
http://www.xlr8yourmac.com/systems/Mac_Pro/Bluetooth_MacPro_install/Bluetooth_Ma cPro_install.html
Just make sure that the part will work in your model Mac Pro. To that end, you may be better off avoiding eBay and going to a parts reseller. There are even third party cards that use the internal Apple bluetooth slot.
http://fastmac.com/bluetooth.php
In theory, using a USB or PCI card will work at login so long as it is recognized by Apples drivers. You say you need to launch an application to use your current USB Bluetooth dongle? If it is not controlled by the Bluetooth icon in the menu bar then it must be using a third party driver of some sort. Unfortunately, I don't know off hand which USB and PCI cards are supported.

The backup disk image "/Volumes/Data/David Witkowski's Mac Pro.sparsebundle" is already in use. Whenever Time Machine starts to backup to Time Capsuel I get the previous error message. I need some help to fix this.

The backup disk image “/Volumes/Data/David Witkowski’s Mac Pro.sparsebundle” is already in use. Whenever Time Machine starts to backup to Time Capsuel I get the previous error message Where can I find this disk image?. I need some help to fix this.
Thanks,
David W

There are multiple answers and solutions if you look just to the right under the heading of More Like This.

HT201364 Hi friends, I have a Mac Pro OS X 10.5.8, I want to upgrade newer version its possible, please help to get a solution thanks

Hi friends, I have a Mac Pro OS X 10.5.8, I want to upgrade newer version its possible, please help to get a solution
thanks
Mujeeb

See options below:
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

Does my mac pro have a tracking device..if not can one be installed

Does my mac pro have a tracking device..if not can one be installed...thanks

Does my mac pro have a tracking device
No.
Install tracking software:
http://mac.appstorm.net/reviews/security/hidden-track-and-recover-your-stolen-ma c/
http://preyproject.com/

My Mac Pro (2006) seems to be running slow. Can anyone advise me?

My Mac Pro (2006) seems to be running slow. Can anyone advise me?

macworld.com/mac-troubleshooting-what-to-do-when-your -computer-is-too-slow.
Basically... Make sure you have enough Free Hard Drive space for your Mac to Perform as expected...

HT4505 I have 4 accounts on my Mac Pro running Mavericks. From one account I can scan with my Epson NX420, but the other three accounts do not see the scanner. Can print from all accounts.

Sorry, I was not given the option of posting to a Maverics community. I have 4 accounts on my Mac Pro running Mavericks. From one account I can scan with my Epson NX420, but the other three accounts do not see the scanner. Can print from all accounts.

Hi there Ira Fletcher,
I would recommend taking a look at the troubleshooting steps found in the article below. Note: While the article was written for printer issues, many of the same troubleshooting steps apply to scanners as well.
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
-Griff W.

My mac pro is only on os 10.5.8 can i bring it into an apple store to get it fully updated ?

Similar Messages

Maybe you are looking for