My Mac Pro only has a 250GB hard drive. can I use my 1TB hard drive from my windows computer, they're bith SATA

my Mac Pro only has a 250GB hard drive. can I use my 1TB hard drive from my windows computer, they're bith SATA

You want system, data, backup etc. Make good use of the four internal drive bays.
You will have to use Disk Utility to ERASE or click on drive and use PARTITION to make it Mac writeable.

Similar Messages

HT3625 Hello, If my mac pro only has a "Internal Microphone/Built-in Input" but no "Line In/Built-in Input." where can I get this option?

Hello, If my mac pro only has a "Internal Microphone/Built-in Input" but no "Line In/Built-in Input." where can I get this option?

Mosidun 3.5mm Male to Female Audio Cable for iPhone

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

In the Mac side of things, backups usually come in two flavors: clones or incrementals.
A bootable clone is a bit-for-bit copy of all essential files in the startup volume. If using the Lions, clones can be made using CarbonCopyCloner or just plain old Disk Utility. These backups represent the safest protection of your info, but take the longest to do. Recovery is an inverse process: you copy the clone back into the internal drive.
Incremental backups start with a complete backup of the startup volume and only copy whatever changed from the previous run. OS X includes the fully integrated Time Machine backup utility to do this. It is extremely easy to do and takes the least amount of time. Recovery is another matter altogether since you have to start with a freshly installed instance of the OS and have to apply all intervening backups to bring the result to the latest saved version.
As for where the backup takes place, the recommended media is an external dedicated drive or drives connected via the fastest interface available on your Mac: Thunderbolt, USB3, Firewire, or USB2. Network-based backups, wired or wireless, are attractive but may not offer the same performance and hence take longer. Also important to note that the entire drive need not be completely dedicated to a single backup. The Mac's EFI firmware infrastructure allows for an unlimited number of partitions on a hard drive and each can be used for either type of backups.
Holler if you need specifics on how to do each. This was just an executive summary.

HT1329 i read the article on using ipod to move music from my windows computer to my new mac...can i use my ipad instead to do this?

i read the article on how to use an ipod to move music from my old windows computer to my new mac...can i use an ipad instead?

No. It only works with iPod Nano, Shuffle and Classic. You could use an external HDD or pendrive tough...

I've bought an Apple USB drive, can I use this to load DVD's onto my computer so I only need to take the laptop on holiday with me rather than the USB drive and dvd's?

I've bought one of the Apple USB Superdrives thinking I could use it to load DVD's and save them onto my macbook pro, can anyone confirm if I can or can't do this?
If I can how do I do it?

DtheG13 wrote:
Ok so any chance you could explain to me exactly what I need to do as I am absolutely clueless! I have a pile of DVD's, the USB superdrive and I've just downloaded the Handbrake software. When I put the DVD into the superdrive it starts playing, how do I get the series onto my computer?
If you haven't done this before, there are a few things you need to know. Sorry to say that this is not yet a simple, straightforward process like it is for music CDs. It helps to be a little geeky. You will need to make some choice about file format and file size if there is any chance that the imported discs will take up more space than you have available on your hard drive. If you are willing to learn, you should read the Handbrake User Guide and other articles on the Web about importing DVDs.
If you think this is starting to look complicated and you don't have time to figure it out before the trip, it might be easier to just bring the discs.
I have found that Handbrake can't import every disc. I think Mac DVD Ripper Pro is a much easier program to use, and it will import almost any DVD pretty reliably, but it costs money. For me it is worth it.
No matter which way you do it, it is going to take a lot of time to import a bunch of discs. It is going to take a lot more time than importing music CDs.

I have a 2006 Mac pro 2.66 I was wondering if you can use a 1TB hard drive in each slot?

Can you use a 1TB hard drive in each slot in a 2.66 Mac pro or if the max drive size is only 500GB in each slot?

you can use 2-3 or 4TB drives, in each drive bay. The 4TB drives are slightly taller and need to check that it aligns properly going in. So it is just physical. most users have already upgraded to 1 and 2TB, and even 3TB for TimeMachine.
While upgrading, buy a 120-250GB SSD for your system. Your Mac will run better than ever.

How can I use my external hard drive for my iphoto instead of my mac book pro memory?

i don't know if this question has been asked before: how can I use my external hard drive for my iphoto instead of my mac book pro memory? just like itunes all my song are save on my external hard drive. make sense?

Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

I have a mac book pro, an ipad and an iphone. i have an icloud account that allows my iPad and imac to sync. but my mac book only has a connection to 'mobile me'. how can i include my macbook with my other devices? help! thanks

i have a mac book pro, an ipad and an iphone. i have an icloud account that allows my iPad and imac to sync. but my mac book only has a connection to 'mobile me'. how can i include my macbook with my other devices? help! thanks

You need OSX 10.7.2 or higher in order to access icloud. The mobile me account is now defunct (it closed down more than a year ago).

I have an early 2008 Mac Pro, which has re-booting problems. Also what does the spinning beach-ball indicate?

Hi, I have an early 2008 Mac Pro which has re-booting problems.
Processor speed is: 2.8
Memory: 2GB 800 MHz DDR2 FB-DIMM
2 x 28GHz Quad Core Intel Xeon
I am running OSX Yosemite Version 10.10
My Mac Pro keeps re-booting. Last year I had to replace my graphics card. My original card was the ATI Radeon HD 2600 XT 255MB, and that is what I have now. At this precise moment my Mac Pro is running perfectly, except that it is slow and the spinning beach-ball keeps appearing. I have managed to do some work with the disk utilities, verifying, cleaning and partitioning. Some errors were found and when it was cleaned this seemed to help my Mac Pro to function properly. Although I am able to use my Mac Pro now, from day to day I still experience re-boot problems. Also quite unexpectedly my mac dictionary has an error, it closed itself down and will not open at all, I had the message to say that a report will be sent to Apple.
I have tried starting my computer with an external hard drive fitted via a USB cable, I use for back-ups. This worked and I was able to wipe my hard drive clear and replace all info from the back up I had done only a few days ago.
This worked for a few days and then the same problem started again.
I am beginning to wonder if I need to buy a new hard drive.
If there is anyone who has some answers to help me solve my problem, I would be most grateful.
Robert

When you have the beachball activity, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

My Mac Pro (2006) has suddenly stopped sending signal to the display monitor.

My Mac Pro (2006) has suddenly stopped sending signal to the display monitor. It coincided with plugging in an Epson printer via usb - while the system was running. Pretty dumb maybe? Could I have damaged the video card? Anyone ideas? Thanks

Howdy Le Batch,
I was looking into the issue you are seeing here, and came across a helpful article for this specific situation. It's named Apple computers: Troubleshooting issues with video on internal or external displays and can be found here:
When using an external display be sure to check the following:
If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
Monitor and Display Adapter Table
About Mini DisplayPort to HDMI adapters
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
Thunderbolt ports and displays: Frequently asked questions (FAQ)
Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
If more than one video adapter is in use—or "daisy-chained"—troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Reset the system
You can reset the Mac's parameter RAM and SMC.Reset the resolutionStart by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Regards,
Sterling

Hi, I'm using a Mac Pro here. I am trying to connect it with my NAS hard drive. But i could not connect to it because i have an ethernet which connects to the intranet in my company and Air Port for the internet.

Hi, I'm using a Mac Pro here. I am trying to connect it with my NAS hard drive. But i could not connect to it because i have an ethernet which connects to the intranet in my company and Air Port for the internet and it could not detect the the ip address after i input the correct address on "Connect to Server" window. Please help! Urgent! Thanks

I did not say it is not possible.
I said if your company networks are monopolizing both ports, you should talk to them about what options are available.
Maybe you can get the company Intranet over wireless if you change some configuration items such as Subnet Mask.
Maybe you can get on the Internet over Ethernet.
You really need to ask them, and do not let them blow you off because you have a Mac. If they balk, ask them how it would be done on a PC (becasue it will be the same on a Mac).

I had a second hard drive added to my Mac Pro. How do I format it and not effect my orginal hard drive?

I had a second hard drive added to my Mac Pro. How do I format it and not effect my orginal hard drive?

Just format it with Disk Utility as mentioned above. Select the new disk on the list at the left. Click the erase tab. Specify Mac OS Extended (Journaled) if not already specified and give the disk a name of your choice. Then click the erase button.
That's the simplest way to format a disk with a single partition (volum). If you want to create multiple volume (partitions) then click the Partition tab instead of Erase. You can then use then specify a number of volumes and size each volume by specifying its size or just dragging the slider in the bootm right of each partition. Give each a name as before and again Mac OS Extended (Journaled). Click Apply button to create the partitions.
Since you appear to be new at this just "play" with the erase and partition settings so you can become comfortable with them. So long as you have the new disk selected on the left you can't really hurt anything since it's a new disk and no data to loose. You can always go back and erase it back to a single partition.

My mac pro screen has vertical lines... How much does it cost to get it fixed?

My mac pro screen has vertical lines... How much does it cost to get it fixed?

When you fail to give information on the exact model MBP that you have, how do you expect anyone to provide you with any specific information?
I suggest that you go to the iFixit.com and Powerbookmedic.com and look for parts and prices. That naturally assumes that you know what parts are defective and need to be replaced.
Ciao.

Now I can start my Mac Pro only in "secure mode." I'm still appears on all monitors a series of bands such as seen in the attached file. Someone can give me a diagnosis? Thank you.

Now I can start my Mac Pro only in "secure mode."
I'm still appears on all monitors a series of bands such as seen in the attached file.
Someone can give me a diagnosis?
Thank you.

The attached file is not showing.
In Safe/Secure Mode many Drivers are not loaded. When your computer works in Safe Mode, but not regular mode, two types of problems are implicated:
1) Third-party kernel extensions. a conflict with some part of Mac OS X means that when those extensions load, your Mac can not run.
2) Failed graphics card. Since the Driver for the display is not loaded, the display in Safe Mode uses a very simple built-in Driver. In regular mode, once the driver is loaded, all parts of the graphics card must be working, or you could get bands of color on the display (which is just what you reported).
Which Model Mac Pro Tower or MacBook Pro is this?

Os x lion needs 2gb memory and mac mini only has 1gb how do i upgrade

os x lion needs 2gb memory and mac mini only has 1gb how do i upgrade

Apple Menu > About This Mac > More Info
Mine is a MacbookPro8,2
Your model number is needed to determine how far it can be upgraded and how easily.

My Mac Pro only has a 250GB hard drive. can I use my 1TB hard drive from my windows computer, they're bith SATA

Similar Messages

Maybe you are looking for