My mac pro shut down without any reason!

I have a Mac Pro 8 core XEON with OSX LION, 22gb Ram, Ati 1gb to conect an Apple Led Cinema 27" anda Apple HD Cinema 23", two hard drives 1tb and 350gb, 2 external hard drives 500 gb, and 1tb.
Now frequenly my mac shut down without anyreason, sometimes doesnt start up properly and a i have to restart.
What can i do to solve this problem?
I have my mac pro and all the other thins conected to an UPS.

diapoh wrote:
i think maybe is the operating system! i don´t know! theres not reason for over-heating...
Mac pro's are "dust magnets" and suck it in all the time it's on.  Open you mac pro (you won't harm it) and drag you finger across some of the bear metal parts.  Can you write "wash me" on it like a dirty car?   Probably can. 
This same dust gets on (an in) everything inside.  All the air intakes and exhausts and components.  The video card has the same problem.   The dust builds up on all these components so they don't dissipate the heat as efficiently and end up running hotter and hotter as more dust builds up.
This was the reason my first suggestion was blow out the dust (and if there's enough dust do it outside so you don't breath it in yourself).
As mentioned above you should install a temperature monitoring utility like iStat Pro, iStat Menus, Temperature Monitor, Hardware Monitor, etc.  Then you can monitor many of these temps yourself.

Similar Messages

  • After updating my software from snow leapord to mountain lion my  MacBook   Pro suddenly keeps shutting down without any reason no warning suddenly just restarts... Can someone help

    After updating my software from snow leapord to mountain lion my  MacBook   Pro suddenly keeps shutting down without any reason no warning suddenly just restarts... Can someone hel

    Note the date and time the problem occurred, then go to Applications/Utilities/Console and copy the log starting at the time of the crash. Paste the log in a reply. Please do not use a screen shot as they can be hard to read. If there are repeated runs of the same messages, please post only one run. Be selective about what you post and don’t  post huge amounts. Make sure there is no personal data visible. Information learned from Linc Davis.

  • My brand new Mac Pro shuts down for no reason

    My two week old Mac Pro shut downs for no pparent reason. Using the wireless, not plug in to an outlet but battery fully charged. Both times happen within 15hrs. apart.

    Take it back to Apple and ask them to fix it.
    Allan

  • My Safari shuts down without any reason

    My Safari shuts itself down after some time EVERYTIME I use it ..
    it takes 5 min to one hour, and it just closes itself without warning or message ...
    It just vanishes from the Dock
    here is the log from the console :
    13.12.12 21:00:09,727 Locum[443]: Connection with distnoted server was invalidated
    13.12.12 21:00:53,691 Locum[448]: Connection with distnoted server was invalidated
    13.12.12 21:00:56,000 kernel[0]: smb_treeconnect_internal: Malformed tree connect with a bad word count! wc= 2
    13.12.12 21:01:17,777 Locum[456]: Connection with distnoted server was invalidated
    13.12.12 21:01:57,179 mdworker[462]: Unable to talk to lsboxd
    13.12.12 21:01:57,184 mdworker[461]: Unable to talk to lsboxd
    13.12.12 21:01:57,290 sandboxd[463]: ([462]) mdworker(462) deny mach-lookup com.apple.ls.boxd
    13.12.12 21:01:57,298 sandboxd[463]: ([461]) mdworker(461) deny mach-lookup com.apple.ls.boxd
    13.12.12 21:01:57,000 kernel[0]: Sandbox: sandboxd(463) deny mach-lookup com.apple.coresymbolicationd
    13.12.12 21:02:07,762 com.apple.launchd[1]: (com.apple.qtkittrustedmoviesservice[427]) Could not terminate job: 3: No such process
    13.12.12 21:02:07,762 com.apple.launchd[1]: (com.apple.qtkittrustedmoviesservice[427]) Using fallback option to terminate job...
    13.12.12 21:03:01,916 Locum[469]: Connection with distnoted server was invalidated
    13.12.12 21:04:11,717 com.apple.launchd[1]: (com.apple.qtkittrustedmoviesservice[474]) Could not terminate job: 3: No such process
    13.12.12 21:04:11,717 com.apple.launchd[1]: (com.apple.qtkittrustedmoviesservice[474]) Using fallback option to terminate job...
    13.12.12 21:04:24,021 Locum[482]: Connection with distnoted server was invalidated
    13.12.12 21:04:47,417 com.apple.ShareKitHelper[236]: --warning: [ShareKit-XPC] Received XPC_ERROR_CONNECTION_INVALID
    13.12.12 21:04:47,418 com.apple.ShareKitHelper[236]: --warning: [ShareKit-XPC] connectionWithClientInterrupted
    13.12.12 21:04:47,419 com.apple.ShareKitHelper[236]: --warning: [ShareKit] Cancel UI for running services with Client PID: 302
    13.12.12 21:06:58,507 WindowServer[74]: Created shield window 0x14c for display 0x04273140
    13.12.12 21:06:58,507 WindowServer[74]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x0(0)
    13.12.12 21:06:58,515 WindowServer[74]: device_generate_lock_screen_screenshot: authw 0x0(0), shield 0x0(0)
    13.12.12 21:11:12,446 mdworker[495]: Unable to talk to lsboxd
    13.12.12 21:11:12,450 mdworker[494]: Unable to talk to lsboxd
    13.12.12 21:11:12,557 sandboxd[496]: ([495]) mdworker(495) deny mach-lookup com.apple.ls.boxd
    13.12.12 21:11:12,569 sandboxd[496]: ([494]) mdworker(494) deny mach-lookup com.apple.ls.boxd
    13.12.12 21:11:12,000 kernel[0]: Sandbox: sandboxd(496) deny mach-lookup com.apple.coresymbolicationd
    13.12.12 21:11:23,029 com.apple.launchd[1]: (com.apple.qtkittrustedmoviesservice[487]) Could not terminate job: 3: No such process
    13.12.12 21:11:23,029 com.apple.launchd[1]: (com.apple.qtkittrustedmoviesservice[487]) Using fallback option to terminate job...
    13.12.12 21:12:21,311 WindowServer[74]: handle_will_sleep_auth_and_shield_windows: no lock state data
    13.12.12 21:13:09,891 librariand[504]: MMe quota status changed: under quota
    13.12.12 21:14:23,516 Locum[519]: Connection with distnoted server was invalidated
    13.12.12 21:15:19,862 Locum[524]: Connection with distnoted server was invalidated
    13.12.12 21:15:34,229 Locum[527]: Connection with distnoted server was invalidated
    13.12.12 21:15:51,471 WindowServer[74]: _CGXSetWindowHasKeyAppearance: Operation on a window 0x17 requiring rights kCGSWindowRightOwner by caller Dashboard
    13.12.12 21:15:51,473 WindowServer[74]: _CGXSetWindowHasMainAppearance: Operation on a window 0x17 requiring rights kCGSWindowRightOwner by caller Dashboard
    13.12.12 21:15:54,861 Locum[532]: Connection with distnoted server was invalidated
    13.12.12 21:16:17,056 Locum[537]: Connection with distnoted server was invalidated
    13.12.12 21:16:21,670 mdworker[540]: Unable to talk to lsboxd
    13.12.12 21:16:21,674 mdworker[541]: Unable to talk to lsboxd
    13.12.12 21:16:21,780 sandboxd[542]: ([540]) mdworker(540) deny mach-lookup com.apple.ls.boxd
    13.12.12 21:16:21,791 sandboxd[542]: ([541]) mdworker(541) deny mach-lookup com.apple.ls.boxd
    13.12.12 21:16:21,000 kernel[0]: Sandbox: sandboxd(542) deny mach-lookup com.apple.coresymbolicationd
    13.12.12 21:16:22,320 com.apple.launchd[1]: (com.apple.qtkittrustedmoviesservice[518]) Could not terminate job: 3: No such process
    13.12.12 21:16:22,320 com.apple.launchd[1]: (com.apple.qtkittrustedmoviesservice[518]) Using fallback option to terminate job...
    13.12.12 21:16:41,764 Locum[552]: Connection with distnoted server was invalidated
    13.12.12 21:17:51,928 Locum[560]: Connection with distnoted server was invalidated
    13.12.12 21:18:36,520 Locum[566]: Connection with distnoted server was invalidated
    13.12.12 21:18:55,551 Locum[571]: Connection with distnoted server was invalidated
    13.12.12 21:19:10,629 Locum[576]: Connection with distnoted server was invalidated
    13.12.12 21:20:18,335 com.apple.ShareKitHelper[236]: --warning: [ShareKit-XPC] Received XPC_ERROR_CONNECTION_INVALID
    13.12.12 21:20:18,335 com.apple.ShareKitHelper[236]: --warning: [ShareKit-XPC] connectionWithClientInterrupted
    13.12.12 21:20:18,336 com.apple.ShareKitHelper[236]: --warning: [ShareKit] Cancel UI for running services with Client PID: 499
    13.12.12 21:20:39,743 mdworker[586]: Unable to talk to lsboxd
    13.12.12 21:20:39,747 mdworker[587]: Unable to talk to lsboxd
    13.12.12 21:20:39,856 sandboxd[588]: ([586]) mdworker(586) deny mach-lookup com.apple.ls.boxd
    13.12.12 21:20:39,866 sandboxd[588]: ([587]) mdworker(587) deny mach-lookup com.apple.ls.boxd
    13.12.12 21:20:39,000 kernel[0]: Sandbox: sandboxd(588) deny mach-lookup com.apple.coresymbolicationd
    This is the time span were it closed last time.. no other programs were in use except maybe iPhoto.
    I hope someone can help!!
    Thanks in advance !!!!

    Please read this whole message before doing anything. This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it. Step 1 The purpose of this step is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.” While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin. Test while logged in as Guest. Same problem? After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it. *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing. Step 2 The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows: 
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • KT3 2400XP just shuts down without any reason

    I am desperate.
    My system just shuts down as soon as I try to load something in memory.
    It’s a KT7333 ultra 2. The latest bios version an one 512 Mb DDR333.
    First I use memt86 to test the mem. It ran 3 times without any errors. So the
    mem is ok I presume.
    I set the FSB to 133 and the bios reported a 2400 cpu.
    Then I boot a Win98 boot disk en just when the ( dos) startup menu  is
    displayed, the pc shuts down.
    This is not random. It happened as well with other settings. Only the
    default values “last longer” I mean after a while they cause a shutdown as well..
    But when I set the FSB on 133, the pc shuts down.
    I have an arctic cooling Copper Silent cooler. It runs at very low RPM's so
    I get the alarm of "cooler not working". But I continue, like the website
    from arctic-cooling describes. I disable the CPU fan RPM in the bios and
    everything works until the system shut's down. When I look in PC health,
    the temp never goes above 58 °Celsius, so the cooling should be ok.
    After the pc has made a shutdown, I try to restart with the on switch, but
    then there is an error, a signal sounds and when I look at the "D-bracket"
    It indicates an error. The memory detection test, "Testing onboard memory
    size, the D-led will hang if the memory module is damaged or not installed
    properly". The led effectively hangs. But when I cut the power on the power
    supply, and then enable it again, press the on switch, the entire system
    boots without a problem. Just until the shutdown.
    Is there another specific memory setting that I can alter?
    When I set the BIOS to "high performance setup" the disk doesn’t even have
    time to read, the system shuts down earlier. This off course also point into
    a failsafe from the cooling.
    Please help.

    Hi,
    It looks to me as your CPU cooler isn't mounted properly....
    Take it off, clean everything, regrease and put it on the right way....

  • Mac pro shuts down 5 seconds after first time starting up

    my new mac pro won`t start up properly, I push the start button, the start up image appears on my display and 5 seconds later the computer shuts down without any visible reason or notification. It`s a Mac Pro bought in the US and I`m trying to use it in Europe...
    I`ll appreciate any advice you can give me!

    Try a SMC reset.
    DALE

  • My MAC Pro shuts down when the battery still have 50 minutes life.

    My MAC Pro shuts down when the battery still has 52 minutes life without any warning. Does anyone have this problem? BTW, it is less than one year old.

    You must have a MacBookPro, right? MacPro's are big desktop models.
    Try the MacBookPro battery forum or their Usage forum.
    DALE

  • Mac Pro shuts down after setting up RAID (HELP!)

    So, I recently purchased a rev 1 Mac Pro and decided to setup a RAID using 4 750gb WD drives. I am not using a RAID card, simply using Disk Utility.
    I first combined drives in bays 1 and 2 (striped) and then combined drives in bays 3 and 4 (striped) to give me essentially two 1.5tb drives.
    I then created a mirrored RAID using the two striped raids so that I would have the speed of a striped RAID with the safety of a mirrored RAID.
    Once I did this, it showed up as one hard disk on my desktop (I was booting with an external). I then cloned my external drive to the new RAID disk on the desktop, and did so successfully.
    However, now when I try to boot from the RAID, it chimes, the Apple appears, and then the Mac Pro shuts down. I tried holding down option and all 4 drives appear. I tried booting from a different drive, and the same thing happens. I should also note that the firmware bar flashes on the screen before shutting down (looks like a really long pill).
    Any ideas? Does it sound like I did something wrong? I hate to start from scratch, as it takes all night to clone my external drive to the Mac Pro. Thanks for any help.

    Hello, Hatter. Thanks so much for the information. I went with the information from the Macworld article (I believe) "RAIDing the Mac Pro" and according to it this setup was supposedly a great idea. But, yes, it's not working out so perhaps not in this case.
    So, I have four brand new 750gb Caviar Black drives installed. If I understand you correctly, I should stripe 3 disks together, then use a 4th as backup (using Time Machine?). So, if I use the drives I have, I'll have a striped configuration that gives me 2.25TB of space, and a 750gb hard drive for backup. That technically would work for now, as I have about 660gb of data on the system (although in the future I'd need to swap out that 4th drive for a 2TB.
    So, if that is what you're suggesting, would you mind telling me exactly how I do that? I think I understand, but just want to make sure as this is my first Mac Pro and first time setting up a RAID. Thank you so much for your response.
    p.s.: I'm guessing I'll need to do a fresh start and clone my external drive all over again, correct?

  • Mac Pro Shuts down

    Hi.
    My Mac pro shuts down unexpectedly after about three days. And I don't know why. It never happens when I'm working with the computer. In pref it is set to never shut down or rest and to turn on automatically after power failure. But this dosen't seem to work either.
    I made a dump from system log or what it is called in english. Maybe someone smart can figure out what seems to be the problem by reading the things happening before the shut down?
    I have a FTP server on the mac so I would like it to be up and running all the time.
    OS is 10.9.5
    regards
    < Personal Information Edited By Host >

    new log if anyone have any ideas what seems to be the problem.

  • Macbook Shuts downs without any warning.

    Hi All,
    Recently I have noticed that my Macbook shuts down without any warning when the battery is out of power. Previously i used to get a warning when about 9-10 mins of power was left.
    I have all the updates installed. Also I have not installed any new hardware.
    Is there any settings in the System Preferences. What should I do to correct this situation.
    Best,
    Siva
    Battery Information:
    Battery Installed: Yes
    First low level warning: No
    Full Charge Capacity (mAh): 4600
    Remaining Capacity (mAh): 3580
    Amperage (mA): 1542
    Voltage (mV): 12220
    Cycle Count: 113

    I'd try a SMC reset - that usually clears battery/power related settings and might do the trick.
    Blackbook C2D   Mac OS X (10.4.9)   120Gig, 1Gig, Superdrive.

  • Laptop shuts down without any warning

    My laptop is shutting down without any warning. It has done so twice. When I run the preboot diagnostic, everything is fine. When I run Dell Support Assist app, this is the error message that I got from the System History:
    Application Error
    Fault bucket 86066676302, type 4
    Event Name: APPCRASH
    Response: Not available
    Cab ld: 0
    Problem signature:
    Pl: DllHost.exe
    P2: 6.3.9600.17415
    P3: 54504134
    P4: StackHash_216b
    P5: 6.3.9600.17736
    P6: 55014336
    P7: c0000374
    P8: PCH_CF FROM_ntdll+0x000000000009177A
    P9:
    P10:
    Attached files:
    C:\Users\Raymond\AppData\Local\Temp\WER6C2E.tmp.WERInternalMetadata.xml
    These files may be available here:
    C:\Users\Raymond\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_OUHost.exe_fcb15f1d8bcda961763f8dc9a8f899f8621977b_30a79b3d_14cf863e
    Analysis symbol:
    Rechecking for solution: 0
    Report 10: toala596-eca4-11e4-bfac-08edb9244ef6
    Report Status: 0
    Hashed bucket: 7b43e3b419dd3feaa74b55be5e190271
    These files may be available here:
    C: \Users\Raymond\AppOata \Local\Microsoft\ Windows\ WER\ReportArchive
    \AppCrash_OUHost.exe_fcb15f1d8bcda961763f8dc9a8f899f8621977b_30a79b3d_l4cf863e

    Hi ,
    Thank you for writing to the Dell Community Forum.I am Jennifer and I work for the Dell Social Media Team .
    To assist me to resolve this issue I would suggest you to try these steps and advise the result ,
    *)Is this issue seen with all applications and any particular applications.
    *)When the system crashed did you experience any over heating issue.
    *)May I know the operating system installed on the system .
    *)Would suggest you to work on this system in safe mode with networking then test if the same issue is seen .
    *)Also as you mentioned that with the preboot diagnostic the system passed all the test so  the system's hardware is working fine.
    If there are any more queries do reply to this post with the system model ,operating system installed on the machine, service tag of the system(sent via private message) so that I can look into the details of the system and assist you better .
    Awaiting a reply from you .
    Kindest Regards,

  • Imac shuts down without any error message

    imac shuts down without any error message

    Need more details. Which iMac? Which OS? When does it shut down, under what circumstances? What are you doing when it happens? Is it reproducible, i.e. can you make it happen? Does it appear to be getting very hot before it shuts down?
    Open Console in Applications>Utilities and navigate to system.log. Do you see any messages related to shutdown from the time when this has happened? Enter "shutdown" in the filter field, upper right corner.

  • Mac mini turns off without any reason

    My Mac mini turns off without any reason. I just want to make a backup with time machine and after a while the computer doesn´t work anymore. I just see the start-screen with all the users and I had to sign with my user password. After the mac restarts, I had to start time machine again. I stopped energy-management, because I thought that might be the problem but not. Time machine should work the whole night, but I don´t want to sit the whole time next to the mac to wake him up every several minutes. What can I do?

    From the menu bar, select
     ▹ System Preferences... ▹ Security & Privacy
    If there's a closed padlock icon in the lower left corner of the preference pane, click it and enter your login password when prompted.
    Click the Advanced button and, in the sheet that opens, uncheck the box marked
    Log out after … minutes of inactivity

  • Mac is shutting down without warning

    Hi.
    Yesterday I suffered a freeze on my Mac pro (early 2009). After this, I couldn't boot from the original boot disc (verbose mode gave an error about a missing file called BootCache.playlist). Luckily (I thought) I have Time Machine and a second, cloned drive, so I booted from the clone and continued to work.
    Overnight, I restored a Time Machine backup to the orignal boot disk, but this failed to boot also, so I continued to boot and work from my clone drive (this is a work machine, and I'm on a deadline). I decided to wipe my original boot disc, and use Carbon Copy Cloner to restore my boot drive from my clone drive.
    This appeared to complete fine, however, this also refused to boot, and when booting with the Alt key held down, there was no recovery partition (just a somethine called 'EFI' something). So, continuing to work from my clone drive, my Mac suddenly started shutting down again – no warnings, just a brief freeze, then black screen, booting to the 'You Mac unexepectedly shut down ...' message. This happened repeatedly, usually about three minutes after booting up.
    I've now resorted to reinstalling Mavericks (10.9.2) onto my original boot drive, in preparation for a TM restore – however, as a double-check, I thought I'd do a quick Disk Utility check on the original boot drive, seeing as my Recovery partition had now been reinstalled, and I get an error saying "The partition map needs to be repaired because there's a problem with the EFI system partition's file system." DU can't repair it though – it just says "Live file system repair is not supported".
    Does anyone have any experience of this EFI warning / error, and is there any way around it?

    HI Arthur.
    I did think that the EFI warning could be a spurious error (I've had a few such errors before).
    In desperation, I wiped my original boot disc, installed a fresh Mavericks OS, and then restored from TM, but from a backup before the original shutdowns occured (luckily I have multiple backups for my working files). I had to leave this restore over the weekend (it's my work computer), but it appeared to have worked this morning.
    I've been very careful in what I've done since, trying to keep an eye on any processes, apps or combination of things that could trigger a shutdown, but – so far – I've not been able to replicate the issue. It may be that a vital system file became corrupted during my work or during the kernel panic – hence the repeated panics – but I don't see how that would explain the same issue on my clone drive.
    I'm also being exceedingly vigilante for any signs of disc issues, just in case the EFI warning is an issue.
    Interestingly perhaps, I was using Illustrator CC at the time, and I've had experience (or rather a colleague has had) of Illustrator files causing the Finder to freeze, so I wouldn't be surprised if it was Adobe / Illustrator / CC related. I also know that the graphics card in this particular Mac pro is a little buggy, and I've had GPU-related kernel issues in the past, too.
    Hopefully the problem won't resurface, but I'll keep this thread open for a while, just in case.
    Thanks again Arthur.

  • My Mac keeps shutting down for no reason

    My Mac keeps shutting down for no reason

    We have no way of see your Mac so you are going to have to tell us
    exactly what model of MacBook Pro you have
    disk space
    amount of RAM
    what operating system are you running
    any error message you might be seeing
    Allan

Maybe you are looking for

  • Currency translation on Query level (YTD exchange rate)

    Hi Experts, I want to implment the currency translation logic in query as below. Please advise what I should do. Case 1 Variable entry screen Posting date (range): 01.09.2007 - 31.03.2008 Query result Sales amount figures from 01.09.2007 - 31.12.2007

  • Invoice Form_Data Events

    Hi, I'm trying to update fields on the lines of invoice in the FORM_DATA_ADD event. I originally wanted to use the BEFORE event to get the value of docEntry and then retrieve the Business Object and update it. However the ObjectKey is still empty at

  • Best way to set up wireless Internet with my situation?

    Hello All, I am looking for a little help. I have a PBG4 and a new imac. I would like them both to have a wireless internet connection. Reason being is that there is no phone line/cable Internet connection in the room the imac is in. The cable intern

  • Reg : IDOC - inbound function module

    HI guys, I have an ....list of error inbound idocs .......(presently using function module X)...... but recently we made lot of changes in  inbound function module and release as "Y"...hence presently all idocs Uses the inbound function module 'Y'. I

  • Helping Query

    Dear All, I am writing a following query and i am getting below o/p with null rows. I want to eliminate to null rows please help me Please see the o/p with edit mode or run the query. Query : Select Decode (e.deptno, 10, e.Empno||'---->'|| e.ename) D