My Mac pro won't charge, whats going on?

My keyboard no longer lights up, how do I fix it?

Try the directions offered here:
http://support.apple.com/kb/HT3964
You will find links on that page to various models, look for the specific Macbook you have.

Similar Messages

Mac Pro won't charge!!

I have a MacBook Pro mid 2009 and it won't charge, it used to only charge when the computer was closed but now it won't work at all!! Anybody know a solution to this issue? (Btw I still have the original charger that came with the computer)

Welcome to Apple Support Communities
Have you tried to reset the SMC? > http://support.apple.com/kb/HT3964
Also, when you try to charge the battery, does the charger light turn on? If not, it may indicate a problem with the charger. Apart from that, open the "System Information" or "System Profiler" app (in /Applications/Utilities), select "Power" in the sidebar and copy here "Charge Information" and "Health Information" to know more about the battery

My mac pro won't charge even though its plugged in?

i have a new macbook pro 13" bought in july. and today when i plugged into the power source it would not charge? the light on the charger has not turned green or red to say it is in. even though it is? to answer the basic questions yes it it is in a working power point, and yes it is turned on. there is also no damages or scratched to the cord. Someone please help!!

Try resetting your SMC:
http://support.apple.com/kb/ht3964

My apple mac pro won't charge

My MacBook Pro computer won't charge

Apple Portables: Troubleshooting MagSafe adapters
http://support.apple.com/kb/TS1713
Genius reservation http://www.apple.com/retail/geniusbar/
on-line https://getsupport.apple.com/GetproductgroupList.action
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

My Mac book pro won't charge. But the connector is plugged in and shows that its charging but it says it has 0% but if I unplug it it will shut off

My Mac book pro won't charge. But the connector is plugged in and shows that its charging but it says it has 0% but if I unplug it it will shut off. It's been like this all day but I didn't notice till I turned it on.

It's either a power adapter issue (not likely) or (more likely) a power supply problem on your MBP. Take the machine into your local Apple Store or an AASP and have them diagnose the problem.
Good luck,
Clinton

My Mac Pro won't start. It turns on and then a blank, white screen appears. What do I do?, My Mac Book Pro won't start. It turns on and then a blank, white screen appears. What do I do?

Mac Pro won't start. It turns on and than a blank, white screen appears. What do I do?

This could be a software/state problem or a hardware problem. Here are steps to resolve the former.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570

My Macbook Pro won't charge when it's on, only charges VERY slowly when it is shutdown

My Macbook Pro won't charge when it's on. It only charges VERY slowly when it is shutdown. Recently when it was charging shutdown, I could not get it to turn on. The only way it turned on was by removing the charger from the Macbook Pro. This only happene one time but still wondering what is going on with this battery.
Thanks for the help!

First see the MagSafe troubleshooting tips:Apple Portables: Troubleshooting MagSafe adapters and check to see that all looks ok. You might want to try using another charger in case the charger is faulty. If that doesn't help, take the MacBook Pro and charger to an Apple store genius bar and have the technicians test the system to see where the fault is.

My MacBook pro won't charge and I have a flashing green light?

I have not used my MacBook for a couple of days n today realised it needed charging when I come to use it so I plugged it in. I get a green flashing light but it won't charge, what seems to be the problem? I have only had it since April so can't see it being the mac is it the charger itself? Please help!

Do a SMC and a PRAM reset, if that doesn't resolve the issues, look at the MagSafe links.
Step by Step to fix your Mac
If all that fails, then take it in.

Mac pro won't restart after replacing backplane

Mac pro won't restart after replacing backplane. I tried resetting PRAM, no luck. The grey screen with apple logo and spinning wheel shows up and the wheel continues to spin.

What did you modify 'under the hood'?
Mac OS X: Gray screen appears during startup - Support - Apple
Read as MBP.
Message was edited by: nbar

My Mac Pro won't connect to Wifi?

My Mac Pro won't connect to the Wifi that it has been for the past 2+ years. All other devices in our home that use the same Wifi are working just fine.

Tried doing Network Diagnostics multiple times, did not work. Keeps saying it can't connect or times out.
What color was the light pertaining to Wifi in the left column? Red, Green, or Yellowish/Orange?
Some of the following you may have already tried:
Try the basics first:
Change your router channel number. Most times this works & is all you have to do.
Disconnect & reconnect your modem. unplug it for about 10 seconds. Plug it back in. Do the same for Apple’s routers. Wait for everything to reboot.
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer. See these basic networking KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT4628 Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
Manually provided DNS server addresses are higher priority than DHCP's
http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
============================
What to do when you can't connect to the Internet
Also, run the Airport Utility app which is located inside the Utilities folder.
=====================
If using a Linksys router, contact LinkSys Customer Support and/or post in their forums.
If using Apple's Airport, please re-post over in one of the AirPort Forums.

Start Up hangs - My Mac Pro won't turn on

After upgrading, my Mac Pro won't start up. Does any one else have this problem... I can't get my Mac to start up... HELP!

More information on what the 'upgrade' was and which MacPro would be helpful. With that said -
If it worked before the upgrade and does not work now, the first thing I would do is think about what changes were made. If hardware, is/are the component(s) installed the proper ones, designed for Macs and for you Mac? If satisfied with the components being the right ones, I would look at the installation process. Is everything seated properly and in the correct location? Are any power cables connected? Were ESD protocols followed? Next I would run the Hardware Test included on the Installation Disk. Reporting those results here may help. (Note: this may not find a video card problem).

My Mac Pro won't start

My mac pro won't start have a light on and sometimes have a green light on caps key.

Hello there hoc5050,
It sounds like your computer is not turning on consistently. I would recommend the troubleshooting in this article to help you determine what might be causing the issue, named:
Troubleshooting: My computer won't turn on
Thank you for using Apple Support Communities.
Cheers,
Sterling

My mac pro won't boot. It clicks and then clicks off

My Mac Pro won't start. I press the "on" button, it clicks and about 2-3 seconds later it clicks again. Tried every trick I knew, but nothing will work.
Help!

The traditional way to debug this is to remove EVERY item that could be pulling too much power, and try to get the CHIME. Then add an item at a time to get it working fully, or discover what is causing the problem.
Remove AC power and Remove:
All external devices
All PCIe cards including the graphics card.
All Hard drives
All Optical drives
All RAM DIMMs (note where they go)
With NO RAM DIMMs, you should get a Mac Pro that powers up, runs the fans, and flashes the power light (" Help I have not enough working RAM to continue").
Power off, then restore some RAM, and next Startup you should get the CHIME. The chime is generated in Software when the Power-On Self Test has completed without Error. If a source of software can be found, Booting is likely.
Then build up one item at a time.

Mac Pro won't network after 10.5.8 combo update

I just ran the 10.5.8 combo updater and since then my Mac Pro won't connect to my home network. It accesses the internet just fine, but I cannot connect wirelessly to my Macbook or my wifi printer anymore. My Macbook which is still on 10.4.11 can connect to the wifi printer and the internet, but cannot connect to my Mac Pro anymore. I've seen posts about pulling ktxt files out of the 10.5.7 updater, but that doesn't seem to address my issue. Any ideas? Thanks

I just ran the 10.5.8 combo updater and since then my Mac Pro won't connect to my home network. It accesses the internet just fine, but I cannot connect wirelessly to my Macbook or my wifi printer anymore. My Macbook which is still on 10.4.11 can connect to the wifi printer and the internet, but cannot connect to my Mac Pro anymore. I've seen posts about pulling ktxt files out of the 10.5.7 updater, but that doesn't seem to address my issue. Any ideas? Thanks

Went on my vacation, brought my macbookpro, got home, mac pro won't acknowledge photos. Why?

Wife uses the macbookpro mostly with her iphone. However, they are my photos on my phone, and all computers are mine, so why in any case because I have synced with another computer with also uses another iphone, that my personal mac pro won't acknowledge the photos that originated from my phone. Photos shouldn't be subject to copyright like music purchases. If I decide to share my photos with another mac (which also happens to be my macbookpro that my wife uses), there shouldn't be anything applied to the photos I've taken with my personal iphone once it is plugged into my other mac. They're my photos regardless and originated from my iphone, so my mac pro should never block these photos from me in iphoto.
Summary:
I go on vacation with my macbookpro.
I take photos with my iphone. I put them in my macbookpro while on vacation.
I get home. I try to put the photos on my macpro. Not only am I not allowed, I can't even see the photos in iphone via my plugged in iphone. They are hidden when plugged into my macpro.
Why don't I have access to MY OWN PHOTOS when I have spent well over 50,000 dollars in Apple products?
To fix this I had to export the photos from the macbookpro to a USB and manually add them to my mac pro. Alternatively I could plug in my iphone to my windows computer and access all the files via a folder search.

Another way to look at this which imo also applies.
I go on vacation with friend. I take photos with my iphone. I sync some of the photos to his iphoto on his macbook. I get home.
I can no longer see those photos, which I took, using my own iphoto sync on my mac. They don't show up anywhere with preview or image capture (remembered name). Just because I gave my friend some of my photos, doesn't mean a lock should be applied that doesn't allow me to sync those photos via iphoto on my own mac. Doesn't this make sense? Why is this happening?

My Mac pro won't charge, whats going on?

Similar Messages

Maybe you are looking for