My Mac reads out the current time (every hour) TWICE!! Any ideas how to fix it??, My Mac reads out the current time (every hour) TWICE!! Any ideas how to fix it??

Hello everyone!
Some months ago, I enabled the feature to read out the current time every full hour. Since yesterday, my mac reads it out twice, completely interleaved.
What can I do to fix it, so it reads out the time each hour only once?

I've run into the issue and it seems to be related to an app not fully supporting the iOS you're on, the reboot doesn't usually solve it.
I've solved it in the following manner(s):
1) Backup the device to iCloud, then erase the iPad (Content and Network Settings).
2) Setup the iPad and choose to restore from iTunes/iCloud Backup (wherever you backed it up)
3) Perform any software updates
I have not tried simply performing the software updates (which may fix it, but if it doesn't you won't be able to perform the above steps).
Enjoy.

Similar Messages

I have a MacBook Pro (15-inch, Late 2008) and am currently running Snow Leopard 10.6.8. I would like to know which is the most stable upgrade for my model. I have read some reviews of Maverick and Yosemite making the older macs slower. Is this true?

I have a MacBook Pro (15-inch, Late 2008), Intel Core 2 Duo 2.53 GHz, 4GB Memory. and am currently running Snow Leopard 10.6.8.
I would like to know which is the most stable upgrade for my model? Mountain Lion, Mavericks or Yosemite?
When I had gone to the apple care centre in India a few months ago to upgrade my OSX to Mountain Lion, I was told that considering my macbook pro's specs, upgrading it would just make it less efficient, and that I should stick to Snow Leopard unless I consider buying a newer mac that would benefit from it. Is this true? I find it a bit hard to believe. Which update is most recommended?
I also notice that my mac has gotten considerably slower. While using chrome, it buffers and struggles with even just 5 tabs open. Could this have something to do with my current ios? As a precaution, I have always been making sure I have enough free space on disk i.e around 70 - 100 free out of 250GB.
Any advice is appreciated.
Thanks in advance.

Mavericks is no longer available from the App Store, so your choice is Yosemite. One option is to create a new partition (~30- 50 GB), install the new OS, and ‘test drive’ it. If you like/don’t like it it, you can then remove the partition. Do a backup before you do anything. By doing this, if you don’t like it you won't have to go though the revert process.
Check to make sure your applications are compatible.
Application Compatibility
Applications Compatibility (2)

I have the top of the range MacBook Pro. Yet every time I open iPhoto it grinds to a halt with iPhoto crashing 1 out of every 4 times I open it. Is this normal? And if not how can I fix it?

I have the top of the range MacBook Pro (but not the latest one with the Retina display). Yet every time I open iPhoto it grinds to a halt with iPhoto crashing 1 out of every 4 times I open it. Is this normal? And if not how can I fix it? I have 55k photo's.

No it's not normal. What version of iPhoto? Post the first 50 lines only of the crash report
Regards
TD

How to restart base station from airport utility? I used to be able to do it remotely I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose t

How to restart base station from airport utility? I used to be able to do it remotely
I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose the issue. This results in being told to restart the wireless. The airport utility includes the drop down option of restarting but is not clickable so I can't choose it.
With my prior macbook and same time capsule, etc if i had problems connecting to the internet I would run network diagnostics to help out. This included clicking on the airport utility ---> base station --> restart. This worked most of the time.
Bottom line, is there something I am missing in not being able to restart the wi-fi remotely? ]
Thanks in advance

You are likely forgetting a step.
Open AirPort Utility
Click on the Time Capsule icon
Click Edit in the small window that appears
Now click the Base Station menu.....top of the screen....not the Base Station "tab" in the center of the screen
Click Restart

I have been trying to update via App Store and every time only with apple software it starts to download and it will says it's calculating time remaining then an error message pops up saying " An error has occurred the request timed out. (102) "

I have been trying to update via App Store and every time only with apple software it starts to download and it will says it's calculating time remaining then an error message pops up saying " An error has occurred the request timed out. (102)" I have tried everything , I've been told its my ISP but I have tried using differenet internet to attempt the updates. Like I said all other software updates fine its just apple software

http://www.apple.com/support/mac/app-store/contact.html?form=account

For the first time, I downloaded a podcast in the podcast app by clicking on the cloud icon. Now, every single play button for all of my podcast episodes is grayed out. Why can't I play any of my podcasts any more?

For the first time, I downloaded a podcast in the podcast app by clicking on the cloud icon. Now, every single play button for all of my podcast episodes is grayed out. Why can't I play any of my podcasts any more?

Greetings Heather,
After reading your post, it sounds like you are experiencing an error with the Podcasts app. You may want to consider restarting the device first, and then resetting if that does not work. This article provides detailed instructions for Restarting, and Reseting:
Turn your iOS device off and on (restart) and reset
How to restart
Press and hold the Sleep/Wake button on the top of your device until the red slider appears. Then drag the slider to turn your device completely off.
After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
How to reset
You should reset your device as a last resort and only if you can't restart it.
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
Thank you for contributing to Apple Support Communities,
BobbyD

Lightroom has crashed with error message 'error reading from its preview cache' - this happens every time i try a launch it. I have looked a forum to repair the fault. there are different recommedations.can you tell me step by step how to recify this pro

lightroom has crashed with error message 'error reading from its preview cache' - this happens every time i try a launch it. I have looked a forum to repair the fault. there are different recommedations.can you tell me step by step how to recify this problem. i can not find ircat ir data etc in the programme files. Thanks

robmac76 wrote:
can you tell me step by step how to recify this problem.
Yes:
Step 1: Delete the preview cache.
That's it!
So, the trick is to find the preview cache.
This document gives location:
http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-41.html
To be clear: it's a folder in with your catalog and you want to delete the whole folder but nothing else.
If your catalog file path is "X:\My Catalogs\My Catalog.lrcat", then the preview cache "folder" will be:
X:\My Catalogs\My Catalog Previews.lrdata
So the trick is to find your catalog file, and since Lr won't open your catalog and run, you can't use it to find out.
But you should be able to find it by searching your disks for *.lrcat files - do you know how to do that?
Which OS?
If you know the name of the catalog it will help, but also: it's probably NOT in with your program files.
UPDATE: The above-mentioned document gives default name and location for preview cache, so if you haven't overridden the default, it should be right where that document said it would be - is it? (of course you need to know your user name too, but presumably you do, no?).
R

I have purchased the Acrobat pro subscription for 1 year and have followed the steps to install it. But when i go to start it, It crashes and it does this every time! I have restarted my mac pro and also restarted in safe mode but it just doesn't work! PL

I have purchased the Acrobat pro subscription for 1 year and have followed the steps to install it. But when i go to start it, It crashes and it does this every time! I have restarted my mac pro and also restarted in safe mode but it just doesn't work! PLEASE HELP!!

Hi jim1287,po
Check for the latest updates. Installing latest updates should resolve this problem.
Also, try to ran disk repair using safe mode in Mac, for instructions please visit: http://support.apple.com/kb/PH14204
Try enabling root user profile on mac and try to check. OS X Mavericks: Enable and disable the root user
Regards,
Ajlan Huda.

Every time I go to close Firefox, it goes to the same unwanted web site that I visited yesterday, then i have to close that out to finally exit

every time I go to close Firefox, it goes to the same unwanted web site that I visited yesterday, then i have to close that out to finally exit

Did the Flash plugin crashes also happen with a previous version (10.1) of the Flash player?
If you have submitted Breakpad crash reports then post the IDs of one or more Breakpad crash reports (bp-xxxxxxxx-xxxxxxxxx-xxxx-xxxxxxxxxxxx). 
You can find the IDs of the submitted crash reports on the about:crashes page. 
You can open the about:crashes page via the location bar, like you open a website.
See:
* http://kb.mozillazine.org/Breakpad (Mozilla Crash Reporter)

Every time I open a new safari page and scroll down it jumps back to the top of the page. mac book pro, newest version of OSX. Thanks all!

every time I open a new safari page and scroll down it jumps back to the top of the page. Happens super inconsistently and not on every web page. Tried all the dum dum moves like restarting computer and changing scroll direction in track pad. Anyone else have a similar issue? mac book pro, newest version of OSX. Thanks all!

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

I'm trying to download a movie on my mac book air, but every time i try to download it it says error 8003 and won't download the movie.

I just got a Mac Book Air and am trying to download a movie, but every time i try to download it it says error 8003 and will not download the movie.

Hello skiier4life,
Thanks for using Apple Support Communities.
To troubleshoot this issue where you are receiving error 8003 in iTunes when trying to download content from the iTunes Store, please follow the troubleshooting steps in the article linked to below as error (-50) is the same as error 8003.
iTunes Store: "Error (-50)" when downloading purchased content - Apple Support
Cheers,
Alex H.

I recently used an external hard drive to back up photos etc from my mac, I didn't do a full system back up. Since then a finder window titled 'client node' keeps popping up every time i hit the spacebar. Can anyone help me please stop this happening?

I recently used an external hard drive to back up photos etc from my mac, I didn't do a full system back up. Since then a finder window titled 'client node' keeps popping up every time i hit the spacebar. Can anyone help me please stop this happening?

Click on it, choose Get Info from the File menu, and check the format.
If it's formatted as NTFS, reformat it as MS-DOS, exFAT, or Mac OS Extended (Journaled) as desired, or install software such as Paragon NTFS on the computer.
If it's formatted as FAT32 or exFAT, use the Disk Utility's Repair Disk command on it; this may also happen for a flash drive which is about to fail.
If it's formatted as Mac OS Extended, click Authenticate and provide your administrator password, or change the permissions on that specific folder in its Get Info window.
(109318)

How can I set up a preferred printer so I don't have to pick the printer each and every time I print something out? At the moment, even immediately after printing one thing, it prompts me to pick a printer, which is very time consuming.

How can I set up a preferred printer so I don't have to pick the printer each and every time I print something out? At the moment, even immediately after printing one thing, it prompts me to pick a printer, which is very time consuming.

Compass Health Systems wrote:
How can I set up a preferred printer so I don't have to pick the printer each and every time I print something out? At the moment, even immediately after printing one thing, it prompts me to pick a printer, which is very time consuming.
No, there is not setting for a default printer.The system scans for available airprint printers each time you print.

HT2242 How do I change my country in my apple account? Every time I sign in, the system automatically sends me back to the store my account is currently based in and I am unable to change this. I keep going in circles.

How do I change my country in my apple account? Every time I sign in, the system automatically sends me back to the store my account is currently based in and I am unable to change this. I keep going in circles.

No, What I mean is, Now I am leaving in USA but every time that I tried to download an app only appear app available in Venezuela no the one available in USA.
I already change my address and select USA but still I can not download app for USA

Every time I turn my mac off, the desktop background changes. It always returns to the same picture, which was the second or third thing I changed my desktop to after getting my mac.

Every time I turn my mac off, the desktop background changes. It always returns to the same picture, which was the second or third thing I changed my desktop to after getting my mac. I have background switching unchecked in my preferences, and I have never selected it as an option. Also, when I go to my preferences, it will show the icon of the picture I changed it to, even though the desktop itself has switched back.

I would start with some basic troubleshooting.
REPAIRING DISK PERMISSIONS -
NOTE: refer to article "About Disk Utility's Repair Disk Permissions feature" found here http://support.apple.com/kb/ht1452 - for the actual apple article on these step. ----
- click finder in the bottom dock, and in the window that opens, select applications in the left column - scroll through until you see the 'Utilities' folder and double click to open it. Then double click on 'Disk Utility'
- When prompted to select a disk volume or image, select the 'Macintosh HD' in the left column
- ensure the the "first aid" tab is highlighted blue in the middle of the screen
- click the button at the bottom that says 'Repair Disk Permissions'
- this process will take a few minutes to run. It will indicate it's done, by scrolling to the bottom of the "details area" displaying 'Permissions repair complete'
Dan Frankes has written an excellent article for Macworld on "Permissions" and the need to repair them - see - http://www.macworld.com/article/52220/2006/08/repairpermissions.html. Another good web site is - http://www.thexlab.com/faqs/durepairfns.html.
REPAIRING DISK - About OS X Recovery - http://support.apple.com/kb/HT4718.
- restart your computer hold down command + R keys on the keyboard to boot you into Lion / Mountain Lion Recovery mode
- select english as your main language then the continue arrow
- select "Disk Utility" on the resulting screen then 'Disk Utility' ---
- When prompted to select a disk volume or image, select the 'Macintosh HD' in the left column
- ensure the the "first aid" tab is highlighted blue in the middle of the screen
- click the button at the bottom that says 'REPAIR DISK' .......NOT "Repair disk permissions"
- this process will take a few minutes to run. It will indicate it's done, by scrolling to the bottom of the "details area" displaying "The Macintosh HD appears OK"
If you get any other message OTHER than "The Macintosh HD appears OK", like "the Macintosh HD was repaired successfully" run the "Disk Repair" again, until it displays "The Macintosh HD appears OK".
Once done, restart the computer as normal

Every time I try to perform a character recognition on a PDF on my Mac, to make the PDF searchable, it crashes. Latest OS X, latest Acrobat, brand new Mac.

I am having trouble making PDFs searchable. I often receive bundles of scanned PDFs. I can combine them. I then try and make the resulting file searchable and the process always crashes after a few hundred pages. I have reduced the DPI output from 600 to 300 but that does not help. Running Mavericks on the latest trial Acrobat on a 2014 Macbook Pro.

Hi crimlaw,
Please check the performance by updating Acrobat to the latest patch i.e. v11.0.07 and check.
Regards,
Rave

My Mac reads out the current time (every hour) TWICE!! Any ideas how to fix it??, My Mac reads out the current time (every hour) TWICE!! Any ideas how to fix it??

Similar Messages

Maybe you are looking for