My mac recognizes new Radeon 5770 bought as an g.c. upgrade. no video out.

hello. i bought an mac graphics card upgrade and the mac recognizes it. now, i get no video out. i am using a DVI to VGA port which i am using now, so it works fine. below the info on the card as it shows:
Chipset Model:          ATI Radeon HD 5770
Type:          GPU
Bus:          PCIe
Slot:          Slot-1
PCIe Lane Width:          x16
VRAM (Total):          1024 MB
Vendor:          ATI (0x1002)
Device ID:          0x68b8
Revision ID:          0x0000
ROM Revision:          113-C0160C-155
EFI Driver Version:          01.00.436
why am i not getting any video off it? and how should i troubleshoot this?
ty for your help.

You cut the bottom off that info. What does the rest say?
EFI Driver Version...
Displays:
Cinema HD:
Resolution:          2560 x 1600
Pixel Depth:          32-Bit Color (ARGB8888)
Display Serial Number:          CY_________
Main Display:          Yes
Mirror:          Off
Online:          Yes
Rotation:          Supported
Display Connector:
Status:          No Display Connected

Similar Messages

New Radeon 5770 1GB and old MSI RD480 Neo2 motherboard incompatible?

Hi,
Am having problems getting my machine to post after inserting a new graphics card: Sapphire Radeon 5770 1Gb. Have no problems with my old card in the PCI-E slot (X800GTO) - it works fine. But when I insert the 5770, the machine won't even post.
The core of my machine is ~4 years old, with a MSI MS-7194 RD480 Neo2 motherboard. I've updated the PSU to a Corsair 650W and as the light on the graphics card is on and ATI recommend a 450W PSU I doubt it's a power issue (and yes, I have attached a PCI-E power lead to the 5770)...
Is the issue that my motherboard is too old? Or is there a newer BIOS for it? I tried the MSI LiveUpdate tool which said there wasn't.
So I'm a bit stumped! Am in the process of putting a new machine together, but can only buy 1 or 2 parts each month - I was hoping to make the most of the graphics card before I had to cough up for a new CPU/Mobo!
All help gratefully received - thanks!
PS
Here are my system details:
Mobo: MSI MS-7194 1A RD480 Neo2
Bios: 26/2/2006 version (from msinfo32)
CPU: Athlon 64 X2 3800+
RAM: Crucial, 4x512Mb
GPU: Sapphire Radeon HD 5770 1Gb VaporX (no drivers installed as machine won't even post!)
PSU: Corsair TX650W +3.3V: 24A, +5V: 30A, +12V: 50A. Max combined +3.3/+5: 170W.
HD: SATA1: WesternDigital 200GB, SATA2: Samsung Spinpoint F3 1TB.
DVD-RW Sony IDE0, DVD-ROM Sony IDE1
OS: Windows XP SP2

There has been an on going problem with that model # in general and that brand & model in particular not working on a wide variety of MB's. On some MB's that have 2 16x slots it will not work in slot 1 but will in slot 2.

When I sync my ipad to my mac, the 2 new songs I bought wont download to the ipad. Any ideas?

When I sync my ipad to my mac, the new songs I bought on the mac are not on my ipad?

What is selected under the Music tab for your iPad sync preferences with iTunes?

ATI Radeon 5770 in Mac Pro

I have a Mac Pro 3,1 (the 2008 model), which works with the ATI Radeon 5770 GPU. I want to upgrade from my 2600 because it's noisy and not as fast as I want it to be. It seems like there are two versions of the 5770: Mac and non-Mac. What's the difference? Can I put a regular 5770 in my Mac or only the "Mac version"?

Graphics cards that are PC-BIOS only do not show a picture under MacOS X, which uses EFI firmware.
PC-cards that have been flashed to EFI firmware do not show a picture until the login screen.
Genuine Mac cards show a picture from power-on, and this makes debugging and booting from another drive much simpler.

ATI Radeon 5770 w 2008 MacPro 3,1

I recently had my GeForce 8800 go bad on me. And after some research I plunked for the ATI Radeon 5770 (bought from here on the Apple Store).
I have a Dell 24" 2804WP LCD monitor, and am using the DVI port.
Before my 8800 went belly-up, I had ZERO problems with my monitor.
But now, since I've installed the ATI 5770, the monitor often "blacks out", and gives me this error message:
When I log-in via ScreenSharing (from my MacBook) and I see that there are not displays detected:
In fact, I get this same "non-display" configuration even when the monitor is "working."
Is this a driver thing? How do I go about troubleshooting this?
Any ideas?

The message you are seeing on screen is generated by the display, not by the Mac.
The Mac does not use custom Drivers for any display. Instead, it uses a highly-parameterized Driver that is customized by the reported capabilities of the Display.
The display must report both its NAME and its Capabilities when the Mac asks for them, usually at power-on.
A common problem with displays that have multiple inputs, is that at the moment the Mac asks for this information, the display is not paying attention to the correct port, and misses the query. The Mac does not get a response, so the display stays blank. You can use the (Detect Displays) button to get the Mac to ask again, but this may require an additional display.
I do not believe converting from Mini DisplayPort will improve anything. Direct DVI should be superior. Since your display is only 1920 wide, Dual-Link is not needed.

Choppy 3D on cs6 with radeon 5770 HD

Hi,
I'm running a mid 2012 Quad core mac pro with radeon 5770 HD. I use photoshop cs6 extensively. But 3D performace on the current GPU is disappointing. photoshp freezes if i just change bevel and angle amount. Interactive light controls aren't interactive, they react a few seconds after i drag them around. But the rest of the system works just fine even though PS halts with the spinning ball appearing every now and then. this only happens when working with 3d in cs6. Can anyone tell me what the problem might be. Should i get an nVidia card instead?
thanks.

What is the exact error message that you're getting?
Regarding the GPU, read this for details:
http://blogs.adobe.com/aftereffects/2012/05/gpu-cuda-opengl-features-in-after-effects-cs6. html

Mac Pro 4,1 with Radeon 5770 upgrade audio problem

Today I installed the 5770 upgrate from apple. I bought it from amazon.co.uk.
I installed two cards, one on my 4,1 mac Pro and one on my old 1,1 Mac Pro.
The problem is that I lost the sound card on my 4,1. No audio at all. There is no sound card in the profiler, although when i run Windows 7 64 on bootcamp I can see the sound card, the drivers work but still no sound at all. I rolled back to my 4770 and everything worked as usual. The old mac runs perfectly with the new radeon.
Both macs run 10.6.7 fully updated.
I don't understand it
need help...

Hi There!
Same thing happened to me today installing a new ATI 5770 into a 2009 quad-core Mac Pro.
Simple answer: reset your PRAM.
There is a switch on the logicboard next to the RTC battery.
Shutdown the Mac with the 5770 installed, disconnect the Mac's power cable, hold down the reset swtich for 10 seconds, re-attach the Mac's power cable & boot the Mac.
If successful you will hear the "RAM is good" chime when booting.
Your audio device will now appear in System Profiler.
Enjoy your music!
Regards,
Dzzineer

ATI Radeon 5770 in 2006 Mac Pro with Lion

Hit an issue with my 2006 Mac Pro when the video card died in late October. At that point I was running Lion and had kept on top of software updates. Being on a restricted budget, I have purchased and installed an ATI Radeon 5770 card from the Apple store as I cannot afford a new Mac Pro. I knew that before I did this there may be incompatability problems with this card and Lion on the older Mac Pros, and this seems to be the case.
However, having trawled through the forums it seems some users are able to run this card on 1.1 machines with Lion. So I am now wondering if I have another issue - I'd much rather stick with Lion if I can rather than revert to Snow Leopard. Now I have installed the card things seem fine with the display - the 30" cinema display no longer has blocks of pixels all over it. On boot up the screen is a pale grey, the Apple logo appears in the centre with the busy timer underneath. I also get a loading bar for about 20 seconds. This gets to about 20% then disappears. Everything sounds like the machine is booting normally but it just won't progress beyond this point. I have tried holding shift to boot it in safe mode but the same things happens.
If anyone can help point me in the right direction of what I should try next I'd be profoundly grateful!
Vinny

I knew that before I did this there may be incompatibility problems with this card and Lion on the older Mac Pros,
Although some users have complained of problems, their wounds may be self-inflicted. Use of a non-Apple ATI 5770 or failure to upgrade to at least 10.6.5 are high on the list. The main "issue", if you can even call it that, is the card runs more slowly than its published benchmarks due to PCIe 1 slots in the Mac Pro 1,2 and 2,1.
I also get a loading bar for about 20 seconds. This gets to about 20% then disappears.
That progress bar is indicative of unresolved Hard Drive problems. You need to boot to an alternate source of software (Hold Command-R at startup for Recovery_HD if you are running later than 10.6.8) and check the SMART Status and then select Macintosh_HD or whatever you renamed it and ( Repair Disk ). Repeat until all problems are resolved or it gets stuck. If you need help, copy the EXACT error message back here.

Now that CC is out - Radeon 5770 or Quadro 4000 for Mac?

Been kicking the tires on Premiere CC and may switch the whole operation over to Adobe from FCP Legacy. I have both cards and was wondering which one to use for CC. I originally baught the Quadro for PP6 but felt the app wasn't ready yet. Looks like CC is more like FCP8 (Yay!) but now seems optimized for the Radeon 5770 as much as the Quadro. So any advantage to keeping the Quadro or just sell it?

Run & Gunner wrote:
So any advantage to keeping the Quadro or just sell it?
You're not offering good choices here, so I'm going to introduce one and call it: "None of the Above". Neither card is particularly good for one reason or another. Very old generations of each GPU; there are much newer Mac-compatible cards available. Look to the Mac version of the GTX680 or the AMD 7950 if that's your thing.

Radeon 5770 in 2008 Mac Pro, won't boot - hangs at Apple logo screen??

Okay, so I had the Radeon 2600 XT and it kept giving me issues with pink & white checkerboards and freezing, then eventually wouldn't let me boot past the white/grey apple logo loading screen. Now, today I installed Apple Radeon 5770, just installed, got the MiniDisplay to DVI-D adapter and everything, but it STILL won't let me get past the white/grey apple screen! I can't seem to get the DVD drive to open either. Both of my hard drives have been working fine and I've even swapped slots and i still can't get past the white screen! What gives? I just dropped over $300 for this, so you can imagine my dismay and frustration. Can someone please help me with some ideas? Would be GREATLY appreciated.
It's a 2008 Mac Pro dual 2.8Ghz (3,1), running 10.5.8
M

Yeah, ok thanks for the response about the screen! So, I don't have 10.6.5. I'm running 10.5.8, which the Radeon 5770 says it needs 10.6.5, but -finally- I got my computer to boot up with the 5770 in it, on 10.5. Al I did was hold OPTION+ Power button and it took me to a blue screen, then to my 500 GB new HD. I then switched over to my other username on Macintosh HD (drive that came with the MacPro) and OSX loads fine! I can tell that it still needs to be on 10.6.5, so I can download the drivers because the text is ever so slightly fuzzy, and the color isn't tuned well (too much contrast) and images take a little longer to load/ are a bit laggy. I'm just glad it's up and running! No more pink transparent checkerboards, and loud *** fan sounds! I am wondering though, what was causing this hold up? Is it only booting up because I have the 10.5.2 install disc in the SuperDrive? I almost don't want to take it out and try without it, after the trouble i've had, just in case lol. I'd like to have an idea as to why, because I don't want to mask a problem, and have it eventually turn into a catastrophe.

ATI RADEON 5770 on Mac Pro 2006

Hello,
I am using a MacPro 1.1 (from 2006) and out of the blue my video card which was Geforce 7300GT burned out. I can't find a replacement card which is the same and only combatible one I found is Ati Radeon 5770. Before I move on buying this card I am wondering whether it will work first of all on my mac pro, and if so which exact model should I purchase since I see some differences in each one as far as the memory bus (4800Mhz, 5200 Mhz and 1200 Mhz) and the processor clock speed ( 850 Mhz and 875 Mhz) I would really appreciate some help on this matter since it's already 2 weeks I am trying to solve it.
Thanks!

Well, thank you for that.
If you are lucky or willing, the link I have for 1st gen 8800GT model on ebay. Pricey as can be though.
Also:
http://myworld.ebay.com/macvidcards/
Hopefully 5770s are waiting for drivers or to be replaced with Radeon 6xxx series (but which would then require more retooling of drivers you can be sure).
Last year this time, the 5000's were just coming out. Nvidia was also inbetween the FERMI (GeForce 400s) and older GTX 200 series which caused shortages and when you could find anything, inflated pricing.
When I bought the 8800GT I also picked up ($129) OS X DVD 10.5.6 (had I guessed, I would have waited for Snow Leopard @ $29 maybe). And, you have to call but 10.5.x DVDs can be ordered by phone Apple Store but not online (another peeve, it is almost impossible to buy Leopard now, the last that supports PowerMacs too).
At least the Apple variety of ATI Radeon work in any and all Mac Pro models.
If there is a way to flash or work with PC cards, that would come from MacRumors Mac Pro.
http://forum.netkas.org/
http://forums.macrumors.com/forumdisplay.php?f=1

I have a mac book pro that i bought in late 2009. My current software is snow leopard version 10.5.8. I would like to get the new lion operating system but I cant without first getting the latest version of snow leopard. it doesnt show on software updat

I have a mac book pro that i bought in late 2009. My current software is snow leopard version 10.5.8. I would like to get the new lion operating system but I cant without first getting the latest version of snow leopard. however when I go to update my software it doesnt show that any update is available.

10.5.8 is Leopard, not Snow Leopard. You need the Snow Leopard DVD;
You can get it only by phone now from Apple.
In the US, call 1-800-MY-APPLE and ask for a sales assistant. Last quoted price was $19.99 for the single-user and $29.99 for the family licence.
For other countries, check here; http://support.apple.com/kb/HE57
Don't forget to ask for Sales; the tech support guys can't help.
If you want Lion, rather than Mountain Lion, the same Sales team can give you a download code to use at the Mac AppStore.
To get the App Store, you need to update your new Snow Leopard from 10.6.3 (which is the version on the installer) to 10.6.8 with the combo update; http://support.apple.com/kb/DL1399
Be warned that the upgrades will render a lot of older software unusable, and will need new drivers for printers and scanners in all likelihood.

HT1338 new Apple I bought a Mac Pro, since I got it keeps crashing....all the time!!! It is my first Mac computer and it is horrible!!!!

I bought a new Apple I bought a Mac Pro Retina screen, since I got it keeps crashing ALL the time!!! This is my first Mac computer and I am hating it!!! I assume I can take down to the any store and they will replace it??

I have a similar problem, my MBP Retina 15" 6 weeks old crashes and locks-up all the time with just about every application. I now have gone back to using my old MS XP system, it is much more stable than Mountain Lion OS and Apple hardware. I use Window-7 at work for last 6 months, not a single crash and/or lock-up. I'm looking at returning/selling my MBP and getting a Window-8 system, Apple is now building crap hardware and software. I recommend you consider the same solution. Good Luck !

I wonder if Apple took up the old mac book pro if we bought a new one, and if yes so how much?

I wonder if Apple took up the old mac book pro if we bought a new one, and if yes so how much? I have a 2009.

If the old MBP is working, try selling it. However, so that both you and the buyer can avoid sleepless nights, please review this Apple article:
What to do before selling or giving away your Mac
It omits one important thing if the computer came with a OS version older than Lion 10.7: be sure to include the original install disks. Otherwise the buyer may not be able to use the computer and come looking for his money.

Problems after upgrading to ATI radeon 5770 in my mac pro 2008

Hi
Day one
I have upgraded my graphic card to ATI radeon 5770 in my MacPro 2008.
4 hours of installing the screen went blank with noice and line, like it happens in telivison when there is no signal.
Day two
Same thing happened when I started my computer.
does anybody know a soluton to this problem?
please help.
nsnaveen

Mac Pro community is here.
Did you try Apple Hardware Test by extended testing?
I suppose graphic card is something wrong.

My mac recognizes new Radeon 5770 bought as an g.c. upgrade. no video out.

Similar Messages

Maybe you are looking for