My Mac screen is on but the programs don't open.

My Mac screen is on but the programs don't open.

Hi, not sure which Mac or which version of OSX, but things to try...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc or are running Lion, at least try it from the Safe Boot part onward.

Similar Messages

  • I've tried to update my i-Tunes version after the site suggested I should following my i-Pad being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several

    I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Pages is not responding, the icon comes up but the program will not open????

    Pages is not responding, the icon comes up but the program will not open????

    You have to give us some more information or do a search in the forum for answers on the same matter.

  • I have an Ipod touch. Since this morning I am not able to open any of my purchased apps. The screen briefly flashes but the apps don't start. Can anyone help?

    I have an Ipod touch. Since this morning I am not able to open any of my purchased apps. The screen briefly flashes but the apps don't start. Can anyone help?

    - Try resetting the iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Then download/install new app.
    - iOS: Troubleshooting applications purchased from the App Store

  • Since I have changed from Windows 7 to Windows 8.1, I have not been able to start up Photoshop Elements 9! or Premiere Elements 9! The menu starts up allright, but the programs don't start when I press any buttons. How do I fix this problem?

    Since I have changed from Windows 7 to Windows 8.1, I have not been able to start up Photoshop Elements 9! or Premiere Elements 9! The menu starts up alright, but the programs don't start when I press any buttons. How do I fix this problem?

    If Layers is greyed out it possibly means that you are in Quick Mode. Select 'Expert' and all the options should become available.
    Try permanently associating psd files with C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe and see if that fixes the issue. Instructions here - http://windows.microsoft.com/en-gb/windows-8/choose-programs-windows-uses-default.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • My apple-id doesn't work with Xcode as a developer. Registration is completed, but the program don't know me as a developers ID.

    My apple-id doesn't work with Xcode as a developer. Registration is completed, but the program don't know me as a developers ID.

    Something as simple as your method of payment having expired could be causing your problems. Use the link below to check all info, especially your payment info, for your Apple ID.
    https://appleid.apple.com

  • So just the document I was last working on in pages won't open. I can't email it either it just sits preparing the document no matter what format I try. I can copy it, but the copies don't open either.

    So just the document I was last working on in pages won't open. I can't email it either it just sits preparing the document no matter what format I try. I can copy it, but the copies don't open either. I tried deleting documents in pages as well as the app and reinstalling it, but nothing has helped.

    Try quitting Pages and then reset your iPad.
    Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app.
    Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • I've paid for Creative Cloud license but the programs won't open

    I purchased the Creative Cloud license already a few moths ago but now all of a sudden the programs won't open (until this some of them have been apparently running as trials). When I try to open the program the Adobe Application Manager pops up and tells me to license the software. When I click it to continue and logg in it says "Creative cloud will now be licensed for _myemailadress_. Click continue to enjoy the software." But when I click continue nothing happens and when I try to open the program again App manager opens up again and tells me to license the software and so on. I've tried to look for a solution but nothing seems to work. I have a MacBook pro OSX 10.6.8.
    Any ideas? Should I try to update my whole computer? My laptop is old and slow so I am a bit afraid everything will disappear if update it.
    All ideas I should try are warmly excepted! I am getting desperate and need the software up and running ASAP.

    Inarinainari please reinstall the Adobe Application Manager by utilizing the steps listed at Error "Failed to Install" Creative Cloud Desktop application - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html.  The Adobe Application Manager has been rolled into the Creative Cloud Desktop application which is why the referenced document refers to the Creative Cloud Desktop application as opposed to the Adobe Application Manager.  Since you are running Mac OS 10.6.8 it is not possible for you to run this later version.

  • My iTunes is no longer working.  I uninstalled and reinstalled but the program won't open and run.  I was trying to download an mp3 file last evening and I think something has been deleted that I need to open the iTunes.  How do i figure out what is gone

    I uninstalled and reinstalled but the program still won't open.  I was trying to download an mp3 file last evening.  Instead the site tried to install a new audio player.  I did not want it so uninstalled it immediately.  I think in that process something was deleted that I need for iTunes but I do not know what.  How do i figure out what is gone and recover it?
    I did try a system restore - but that was not a fix either.

    I was trying to download an mp3 file last evening.  Instead the site tried to install a new audio player.
    Ackk ... that behavior is consistent with the play_mp3.exe trojan:
    http://en.wikipedia.org/wiki/Play_mp3.exe
    Try downloading and installing the free version of Malwarebytes AntiMalware. Update your MBAM definitions and then run a full scan of the PC. (Takes about 2 hour on my Lenovo.)
    http://www.malwarebytes.org/mbam.php
    Does the scan find any infections? If so, please paste the contents of the log file for the scan in a reply here so we can have a look.

  • I opened iphoto and the top bar says its open, but the program doesn't open on the screen. Can you please me?

    This is super frustrating, and I'm afraid of losing my photos! Can someone please help me out! Also this is iPhoto '09 not '08.

    Greetings,
    Can you still go to the menus at the top and click on things or is the program unresponsive?
    If the menus work then go to Window > Zoom.
    If that doesn't help:
    1.) Remove the following to the trash, restart the computer:
    Your User > Library > Preferences > com.apple.iphoto (there may be more than one, remove them all)
    Your User > Library > Caches > com.apple.iphoto and / or just iphoto
    Cheers.

  • I've downloaded the free trial of Illustrator but the program won't open

    Illustrator won't open on my computer.
    I've downloaded the free trial of Illustrator, when I go to open the program the Illustrator logo appears on my start menu for a second and then disappears again and nothing happens - no error message comes up.
    I am using Windows 7.
    I have tried uninstalling and reinstalling the program, restarting my computer, signing in and out of my adobe account and changing the compatibility mode, nothing has worked so far. 
    Please help!

    reset your preferences by holding down shift-ctrl-alt while starting ai.  you'll see a confirmation dialog if done correctly.
    if that fails, uninstall, clean and reinstall per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • I have downloaded Adobe Acrobat Pro XI for Mac. The icon shows up in my dock but the program will not open.

    Can someone help me with this question?

    check your applications directory for an adobe>adobe acrobat pro XI directory.
    if it exists, double click the acrobat executable in it.  any problem?
    if it doesn't exist, acrobat pro xi is not installed.  install it.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • From the initial screen when I select Video Editor, new projects there is a purple and black line appears below the new project but the program does not open up.

    Please help me with the above problem.

    What operating system are you using?
    Have you manually gone to the nVidia or ATI web sites and downloaded the latest drivers for your video card?

  • HT204382 I've gone through the process of installing Flip4Mac WMV, but the program will not open. When I try to open a torrent file to play, it tells me it can't be opened because a required codec isn't available. What am I doing wrong?

    It originally told me that I didn't have the required codec, so that's why I downloaded flip4mac. It's still giving me that message, and Flip4mac won't open at all. Quicktime won't open either. It shows up in the dock but won't open. Can anyone help?

    There are a number of Windows Media codecs that have never been ported to Mac, and the copy protection system also has never been ported. So it's quite possible that whatever this file is you downloaded, you will never be able to play it in Mac OS X. Without knowing what the file is, however, it's not possible to be certain.
    Regards.

  • I upgraded to FF 7.0.1 and it won't load. If I try to uninstall it, it says it is running. I have uninstalled and rebooted and installed an earlier version but the program won't open. Can someone please help me?

    I have tried everything I can think of and that has been suggested in your knowledge base but FF will not open. I have downgraded to an earlier version but that didn't help so I've uninstalled everything and have done a clean reinstall of 7.0.1. I've rebooted at each step.
    However when I tried to bring my bookmarks into Chrome (so I could keep working) it said FF was open. Same thing when I went to uninstall it. Task Manager does not show it running. Chrome is working so it's not my internet connection.
    I have not installed any new software or hardware recently although I did upgrade Roboform to the latest version. This was the reason to update FF as the RF addon wasn't compatible with the version of FF I was using.
    I've scanned for viruses and the machine is clean.
    I am on a PC running Windows 7 Home Premium. At the moment I am working off my old laptop but I need FF working on my main machine.
    Any help greatly appreciated.
    Thanks,
    Kathy

    Thanks for this mha007 - I can now open FF with a new profile. Can I copy my settings from the old profile or will this bring over the same problem, maybe a corrupt file. If it would bring the same problem, is there any way I can check which file is corrupt, apart from taking them over one by one?

Maybe you are looking for

  • How can i convert CR2 images into jpg format, without iPhoto?

    i just import a lot of images with the format .CR2 to mac through "Image capture" is there an app to convert the frmat into .jpg, app like image capture or something like that?

  • Goods Receipt Date

    Hi, When we do the Invoice Verification, using the T Code MIRO, after putting in the PO number, the layout displays the details of the qauntatity received and amount, apart from other relevant details. However, the users desire to have the the date o

  • SQL Query results to CSV as two worksheets

    I'm trying to take two SQL queries and get the results sent to a CSV file on two worksheets.  Looking online I have not found a solid example of using the Excel ComObject to create a CSV then add a new worksheet to the CSV file.  An added bonus would

  • RMAN catalog and Target database

    Hi All, Please clarify my below doubts. We have one server "server1" with oracle (catalog database) version 10.2.0.1 I have server "server2", and we have four oracle homes with four oracle users.Each oracle home consist of one database. all database

  • Having issues with facetime

    Having issues with connecting with Facetime