My @.mac screen name works in messages but not AIM
I have been using a @.mac screen name for my AIM for years now and had no issues. It still works in messages but since iCloud I can seem to use it with AIM on a PC or iPad or iPhone, or any other messages app.
Well, I know that screen sharing works over the net so the first thing that comes to my mind is that maybe the ISP is blocking the port used for screen sharing. Is the iMac accessing the net through a router?
Similar Messages
-
Mac mini webcam works on facetime but not oovoo
I am using a Rocketfish hd webcam and it is working on facetime but not on oovoo. Can someone provide a solution?
P.S.
If the third-party support info and help does not get it working for you, you can also use OS X Mavericks recovery or reinstall to repair your startup disk or reinstall OS X 10.9.
Also Apple's http://support.apple.com/kb/HT2090
(Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD." Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
Message was edited by: EZ Jim
Mac OSX 10.8.5 -
My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.
Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!! -
CS6 Plugin works on windows but not mac
Hi,
We have been developing a plugin for InDesign since CS3 and have recently ported it to CS6 (it was ported to all previous versions too, as they came out).
I followed the porting guide etc. and on windows it compiles and runs just ok - the plugin works correctly.
But when i compiled the same files on our mac machine and put the .indesignPlugin file in th plugins directory i can't see our plugin's context menu.
I can see that it is in fact loaded on startup (when i remove it ID loads 325 extensions, when i put it back - 326), but still it dosen't seem to work...
I initially thought that the versioning was off but our PluginVersion resource relies solemnly on SDKDef.h , i also tried putiing the file in CS5's plugin directory and got an error message that CS6 is required - so the version info is fine i guess.
We are using xCode 3.2.5 (because we have to support Mac OS 10.5 and 10.4) to build on mac and i've never had problems before - it worked on CS4, CS5 and CS5.5.
The changes i made when porting were minor and only in the code - so what has changed? and how come it works on windows but not on mac?
Any input is greatly appreciated, i've already spent days trying to understand this.
Thanks,
Dan.Hi and thank you for replying.
The resources do get compiled correctly (i assume this because we do get a .indesign file at the end - which means the ODFRC ran ok). they are linked correctly in the mac project (i saw a file that determines the version - it's linked the same way against my win and mac projects and the win version works fine so i guess that's ok too).
the context menu is just another menu on the "menu bar" (don't know how to call it?) - i.e where the "file" and "edit" etc. menus are.
I can't seem to understand how come this works fine under windows but not under mac - they are essentially the same projects linked against the same resources (the difference being iCode vs VC10 projects).
can this be related to the fact we're using xCode 3.2.5?
Thank you. -
Slide show works on PCs but not on Macs
A parent at the school where I teach has just created a
website for us. She used Dreamweaver and photoshop to create it.
There are some pages where there should be a looping slide show
(that runs on its own). These slide shows work on PCs but not on
Macs (it just stays on one photo on Macs). For the slide show she
"just added a timeline to the jpg image, changing the imagesource
every 60 frames, that you can do in dreamweaver." Is there some way
to fix this so it works on both?
Here's the school's website: www.smash.smmusd.orgUnfortunately, the timeline function may not be the best way
to do this.
Notwithstanding Joe's comments about 508 compliance, there
have been issues
reported in the past regarding the use of timelines on Macs.
It may be
better to seek some 'banner rotation' scripts using Google,
and replace the
timelines with that script. Your volunteer may or may not
know how to do
that....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Joe Makowiec" <[email protected]> wrote in
message
news:[email protected]..
> On 16 Jun 2007 in macromedia.dreamweaver, Mana Hale
wrote:
>
>> A parent at the school where I teach has just
created a website for
>> us. She used Dreamweaver and photoshop to create it.
There are some
>> pages where there should be a looping slide show
(that runs on its
>> own). These slide shows work on PCs but not on Macs
(it just stays
>> on one photo on Macs). For the slide show she "just
added a timeline
>> to the jpg image, changing the imagesource every 60
frames, that you
>> can do in dreamweaver." Is there some way to fix
this so it works on
>> both?
>>
>> Here's the school's website: www.smash.smmusd.org
>
> I'd worry about accessibility/Section 508 issues before
I worried
> about slideshows. That page is all images.
>
>
http://www.contentquality.com/mynewtester/cynthia.exe?rptmode=-1&url1=http%3A%2F%2Fwww.sma sh.smmusd.org%2F
>
http://www.contentquality.com/mynewtester/cynthia.exe?rptmode=2&url1=http%3A%2F%2Fwww.smas h.smmusd.org%2F
>
> --
> Joe Makowiec
>
http://makowiec.net/
> Email:
http://makowiec.net/contact.php -
After uninstalling and downloading the latest Abobe Flash player, I can no lnger play youtube videos. I get the message "blocked plug-in". It works in Firefox, but not Safari?
Frostbitblue,
in Safari’s Preferences, select its Security tab, and make sure that its “Internet plug-ins: Allow Plug-ins” checkbox is checked. -
Password on apple id works on iPad but not on Mac Pro
Pass word on apple id works with iPad but not on Mac Book Pro, what is the solution, I have tried to reset password but that does not seem to solve the problem.
It kind of depends on where you're entering the password on the MacBook Pro. iTunes Store? App Store?
Try the password on this website https://id.apple.com/ (click on [manage my apple id]
If it works on that website there's nothing wrong with your apple id or password. In that case we really will need to know exactly what you're trying to do when you're getting the password error. -
My apple mail is receiving my outlook/company messages but not gmail. It says the account is offline, but won't go online. gmail messages do send. Help!
Remove the account and put it back again, use Internet Accounts (in System Preferences) to do this.
-
23" works on One but not the Other
I have a Powerbook G4 1.25 GHz running 10.3.9 connected to a similar vintage 23" clear plastic case display with a DVI to ADC adapter connection and it works great.
My husband recently bought a used Powerbook G4 1.67 GHz running 10.4.8. We thought sure that when I was out of town with my computer he could hook up and enjoy the use of my big display, but no luck. It just gives him a blank screen.
Any suggestions as to why that would be? Does his machine require a different adapter? Is it possible his port is just not functioning?
Thanks!
Powerbook G4 Mac OS X (10.3.9) 23 inch displayI couldn't remember what the Display Preferences had said when we tried this last spring and again in the summer, so tonight we connected it again, and wouldn't you know - it worked just fine. We didn't do anything different, so I have no clue as to why it worked this time but not before. He's thinking about getting his own big display, but didn't want to waste his money if he couldn't get it to work, so now I guess we're shopping for another 23" display - probably a used one. Thanks!
-
Rollovers works in Camino but not Safari
Does anyone know why my rollover stopped working in Safari,
but it works fine in IE and Camino?
I did a simple rollover to display before and after images
and I swear, yesterday when testing it in Safari It worked fine.
Today it doesn't work on any of my 3 macs here. It displays fine on
WinXP and IE, and in Camino on my Macs.
here is the page.
www.chipwillis.com/retouch
Any ideas are most appreciated.Thanks! BTW I'm also having trouble updating Adobe Reader. I have 9.4.0 and want to update to the new Adobe Reader X. I keep getting Error 1402 which refers to the registry keys. I am unable to completely uninstall the old version. After receiving the error message it reloades the older version. I read about how to modify the registry to accept it but I believe this is a very wierd way to have to get an update loaded. Any suggestions?
Date: Mon, 27 Dec 2010 10:34:22 -0700
From: [email protected]
To: [email protected]
Subject: Flash Player works in IE8 but not Safari
Hi Bruce, Adobe Flash Player is Installed separately into IE, since Windows uses the ActiveX Control. Firefox and other non-IE
browsers must use the plugin Installer.
This is the Adobe site :
http://www.adobe.com/products/flashplayer/fp_distribution3.html
Hope that explains it.
Thanks,
eidnolb
> -
Flash 10 works in FF but not Safari, OS X 10.5
About a week ago flash stopped working in Safari and both firefox and safari started bugging me to install a newer version. Muttering, I went to the download page and downloaded the latest, which claims to be for Safari, Opera, and firefox.
Installation completes fine with no errors. Firefox works. But in Safari, I just get the usual 'no flash installed, would you like to download it?'
I've downloaded and installed multiple times, no dice. Plug-ins are enabled on Safari. I do not have settings folders to delete--/Library/Application Supprt/Adobe has no flash player folder, only Acrobat, Updater6, and Help.
This whole thing is a black box and I don't see what else to do. Installation completes and there's no way to verify anything. Any ideas would be welcome.Thanks! BTW I'm also having trouble updating Adobe Reader. I have 9.4.0 and want to update to the new Adobe Reader X. I keep getting Error 1402 which refers to the registry keys. I am unable to completely uninstall the old version. After receiving the error message it reloades the older version. I read about how to modify the registry to accept it but I believe this is a very wierd way to have to get an update loaded. Any suggestions?
Date: Mon, 27 Dec 2010 10:34:22 -0700
From: [email protected]
To: [email protected]
Subject: Flash Player works in IE8 but not Safari
Hi Bruce, Adobe Flash Player is Installed separately into IE, since Windows uses the ActiveX Control. Firefox and other non-IE
browsers must use the plugin Installer.
This is the Adobe site :
http://www.adobe.com/products/flashplayer/fp_distribution3.html
Hope that explains it.
Thanks,
eidnolb
> -
UTube video sound works on iPhone5S but not on Macbook Pro?
UTube videos from a variety of sources works on iPhone5S but not on Macbook Pro? Thinking it has to do with recommended Flash settings on the MAC. Is there an app to resolve this inoperability on a MAC without having to make Flash active?
What format is the video? Is it .wmv? Do the DVD's have any type of protection or encryption? This information will help in finding a solution.
-
Specific extractor works in DEV but not in QUAL
Hello Everybody
I have new problem : I created a specific extractor ZCRM_SRV_PROCESS_I based on specific FM based on RSAX_BIW_GET_DATA_SIMPLE.
This extractor have to retrieve specific fields of Service Order Item (linked document type BUS2000116)
In DEV it works fine for loading INIT & DELTA
In QUAL, loading INIT does not work but loading works for some records...
Loading finish with following message :
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Job is cancelled in source system with small text :
19.04.2011 14:51:05 Job started
19.04.2011 14:51:05 Step 001 started (program SBIE0001, variant &0000000022545, user ID ALEREMOTE)
19.04.2011 14:51:05 Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
Do you know why it works in DEV but not in QUAL ?
Thank you
Cyril
Edited by: cyril meslin on Apr 20, 2011 9:53 AMThere is no problem of authorization. In RSA3 it's ok for some records but too long for full of records.
In fact, my FM make a first select after to be determined init or delta mode :
IF i_updmode = 'D'.
SELECT i~guid h~object_id h~guid h~process_type
INTO TABLE st_zcrmt_bw_i
FROM crmd_orderadm_h AS h
INNER JOIN crmd_orderadm_i AS i ON h~guid = i~header
WHERE h~object_id IN lr_object_id
AND h~changed_at >= lv_timestp
AND i~guid IN lr_item_guid
AND ( i~product_kind <> 'X' OR i~product_kind <> '' )
AND ( h~process_type = 'ZSOL'
OR h~process_type = 'ZSPE'
OR h~process_type = 'ZSVO'
OR h~process_type = 'ZSVT' ).
ELSE.
SELECT i~guid h~object_id h~guid h~process_type
INTO TABLE st_zcrmt_bw_i "PACKAGE SIZE I_MAXSIZE
FROM crmd_orderadm_h AS h
INNER JOIN crmd_orderadm_i AS i ON h~guid = i~header
* UP TO I_MAXSIZE ROWS
WHERE h~object_id IN lr_object_id
AND i~guid IN lr_item_guid
AND ( i~product_kind <> 'X' OR i~product_kind <> '' )
AND ( h~process_type = 'ZSOL'
OR h~process_type = 'ZSPE'
OR h~process_type = 'ZSVO'
OR h~process_type = 'ZSVT' ).
ENDIF.
Then FM CRM_ORDER_READ is running for 500 records to retrieve header data :
CALL FUNCTION 'CRM_ORDER_READ'
EXPORTING
iv_no_auth_check = abap_true
it_header_guid = it_guids "500 records
it_requested_objects = lt_requested_objects
IMPORTING
et_orderadm_h = lt_orderadm_h
et_service_os = lt_service_os.
Then this FM is running for 10 records for item data (max 10 because FM CRM_ORDER_READ does not work for more records) :
CALL FUNCTION 'CRM_ORDER_READ'
EXPORTING
iv_only_spec_items = abap_true
it_item_guid = it_guids "10 records
it_requested_objects = lt_requested_objects
IMPORTING
et_orderadm_i = lt_orderadm_i
et_sales = lt_sales
et_appointment = lt_appointment
et_status = lt_status
et_text = lt_text
et_subject = lt_subject
et_doc_flow = lt_doc_flow
et_customer_i = lt_customer_i
Perhaps if I succeeded to improve SELECT & call of CRM_ORDER_READ, it would be better but I don't know how to do... -
Login works in TP2 but not in tp3
Thread moved to:
Login works in TP2 but not in tp3
Message was edited by:
user590082Hi,
the 10.1.3 configuration is different as in TP3. If you had it working in TP3 then I would expect it to work as well in TP3. If it doesn't then it is very likely that you hit a bug. What is the log trace that get printed by the LoginModule ?
Frank -
In line view works in 9i but not 11g
The following subset of a larger in ilne view works in 9i, but not in 11g. Any thoughts on why it doesn't work in 11g. An 'ORA-00979 : not a group by expression' message is displayed. This error message refers to the last 'group by' statement.
select a.appl_start_term
,count(*)apps
,acc_total--, acc_gre
from datatel_snap.applicant_current_part a
, datatel_snap.acad_program b
--accepted
select appl_start_term
,count(*) acc_total
--, sum(decode(test_grev,null,0,1)) acc_gre
from datatel_snap.applicant_current_part a
, datatel_snap.acad_program b
, datatel_snap.dept c
where appl_admit_status_cat in ('MASTER')
and substr(appl_start_term,5,1)= 'F'
and appl_school='SIS'
and a.appl_acad_program = b.id
and b.dept_1 = c.id
and (derived_appl_disp = 'AC')
group by appl_start_term
) z
where appl_admit_status_cat in ('MASTER')
and substr(a.appl_start_term,5,1)= 'F'
and appl_school= 'SIS'
and a.appl_acad_program = b.id
and a.appl_start_term = z.appl_start_term(+)
group by a.appl_start_term ,acc_total--, acc_gre
order by 1
Edited by: user8377830 on Jul 17, 2010 10:05 AM
Edited by: user8377830 on Jul 17, 2010 10:10 AMFine, you shoud do do either:
- a group by "acc_total" or
- use an aggregate function on "acc_total" (like: sum(acc_total), max(acc_total) etc.)
Edited by: user11268895 on Jul 17, 2010 7:14 PM
sorry id didn't read carrefully your statement...
Try to prefix the column acc_total with "z." (both in the select and in the group by expression)
SELECT a.appl_start_term, COUNT (*) apps, z.acc_total --, acc_gre
FROM datatel_snap.applicant_current_part a,
datatel_snap.acad_program b,
--accepted
SELECT appl_start_term, COUNT (*) acc_total
--, sum(decode(test_grev,null,0,1)) acc_gre
FROM datatel_snap.applicant_current_part a,
datatel_snap.acad_program b,
datatel_snap.dept c
WHERE appl_admit_status_cat IN ('MASTER')
AND SUBSTR (appl_start_term, 5, 1) = 'F'
AND appl_school = 'SIS'
AND a.appl_acad_program = b.ID
AND b.dept_1 = c.ID
AND (derived_appl_disp = 'AC')
GROUP BY appl_start_term) z
WHERE appl_admit_status_cat IN ('MASTER')
AND SUBSTR (a.appl_start_term, 5, 1) = 'F'
AND appl_school = 'SIS'
AND a.appl_acad_program = b.ID
AND a.appl_start_term = z.appl_start_term(+)
GROUP BY a.appl_start_term, z.acc_total --, acc_gre
ORDER BY 1.. and use different aliases in your subquery (not the same a the main one).
Edited by: user11268895 on Jul 17, 2010 7:23 PM
Maybe you are looking for
-
I recently updated my iPad to iOS 8 and still checking on the settings. When I happened to swipe on my screen for too long, it zoomed and I can no longer see what's on it. I can not even unlock it. I can not use my iPad anymore. What shall I do?
-
Since recent flurry of updates, all of which I applied, I can no longer sync photos to my iOS6 devices. iTunes sync error at the photo sync step with an unknown error 1140. I have restarted everything, unsynced & attempted re sync to no avail. The ph
-
A client wants a music player that has embedded music, rather than streaming from a separate mp3 file. I explained the file would be much faster loading if we could stream it, but he said something about how that wouldn't work with his .net framework
-
2 TB external hard drives (SeaGate GoFlex Free Agent) were formatted in NFTS to store movies over 4 GB so that I can transfer to PC's. I downloaded camcorder movies in .mts files to this iMac and later transferred to my external hard drives. I am n
-
Recently when using Windows Live or Hotmail, when I try to attach a file it crashes. I am using Firefox 9.01. These are not big files. I need this feature for work. It happens about 90% of the time. If I close Firefox and start again, I can sometimes