My mac shows incomplete folder icon

I was using MATLAB and it crashed suddenly (while using the java plug-in). After that I restarted the computer but the desktop show incomplete icons for folders. Only the top 10% of the icon is visible and the rest is all transparent. In Finder, the problem is similar except that the bottom part shows a repeating rectangular pattern. Using OSX 10.10. Images attached

Hello!
You could try to start with these two steps:
Start your computer in safe mode. That is: shut down your Mac and when you power it back on keep the [shift]-key pressed until you see the large Apple-logo with a loading bar. After a longer-than-normal boot you will see a login-window with the text safe mode. After logging in, see if the issue is resolved. Reboot your OS X normally whether it's resolved or not. Issue solved?
If not: clear out your user cache. Quit all running apps and open the Finder. Locate the menu called "go" in the top left corner of your computer display. Click "go > go to folder" and copy-paste:
~/Library/Caches
     Click [go] Trash the entire content from this folder (likely to be an enormous amount of folders) and reboot your OS X.
Solved?

Similar Messages

  • IPod shows a folder icon with exclamation point after discon

    Since I always ignore instruction booklets with new devices, I failed to notice the warnings with regard to configuring my iPod mini on a Windows PC. I did not install the included software first and I tried to sync with iTunes (my girlfriend already has an iPod mini so iTunes was already installed). As a result I ended up with folder exclamation point icon.
    I tried the folowing already:
    1) Reformatting the disk through windows explorer
    2) Reset:
    The folder icon with exclamtion point appears after reset
    3) Running Updater 2004-04-28:
    After plugging in the iPod at the prompt, the message "iPod updater can;t install firmware on connected iPod. The iPods hardware and the updater firmware are not compatible." I got the same message when doing the same thing in 'disk mode'.
    4) Running the software on the disc that came with it:
    When prompted I connected the iPod to the PC. I get a message "Your iPod has been connected. Please wait while the system recognises the device". And then nothing happens.
    Please can anyone advise me how to fix this problem?

    Ok guys!! I did it!! I fixed my iPod! I want to thanks Apple for the great help they gave me (I'm being sarcastic)!
    I remember that I downloaded iTunes 4.9 and the iPod updater from 2 two weeks ago on my neighbor's computer.
    As this problem (IPod shows a folder icon with exclamation point when I turn it on) only happened since I upgraded iTunes to 5.0 version and iPod updater, and after one and a half day calling Apple, reading the entire web site looking for an answer, discussing with a lot of people about this problem and nothing happened, I wanted to give the last try and went to may neighbor's computer!!
    I turned on the iPod updater.
    When it said i had to connect my iPod I did it
    Then I pressed RESTORE
    After that I plug it in the A/C adapter
    It worked
    I connected the iPod to the computer again
    iTunes worked and my iPod is working as a new one!!

  • IPod shows a folder icon with exclamation point

    IPod shows a folder icon with exclamation point when I turn it on, and says: "www.apple.com/support/ipod"
    I can't restore the I Pod or reset it as they first told on the support web site, because it only appears that message...
    I installed the latest version of the iPod updater and it didn't work also.
    When I go to the iPod updater it gives me the "iPod service error" message.
    What must I do!
    I'm on a Windows XP.
    Help me please!!

    Ok guys!! I did it!! I fixed my iPod! I want to thanks Apple for the great help they gave me (I'm being sarcastic)!
    I remember that I downloaded iTunes 4.9 and the iPod updater from 2 two weeks ago on my neighbor's computer.
    As this problem (IPod shows a folder icon with exclamation point when I turn it on) only happened since I upgraded iTunes to 5.0 version and iPod updater, and after one and a half day calling Apple, reading the entire web site looking for an answer, discussing with a lot of people about this problem and nothing happened, I wanted to give the last try and went to may neighbor's computer!!
    I turned on the iPod updater.
    When it said i had to connect my iPod I did it
    Then I pressed RESTORE
    After that I plug it in the A/C adapter
    It worked
    I connected the iPod to the computer again
    iTunes worked and my iPod is working as a new one!!

  • Sometimes when starting my iMac it shows a folder icon with a Question mark in it. Mac does not start up, only when shutting down and restart again solves it

    Sometimes when starting up my iMac it shows only a folder icon with a question mark in it. Nothing happened. Only when start up again it runs ok.
    What can be the cause of this.
    thanks for your help
    Hans

    That's an indication your Mac can't find a system folder to boot from.
    Open System Preferences > Startup Disk
    Select:  MacintoshHD OS X
    For OS X v10.4, v10.5, and v10.6 >    A flashing question mark appears when you start your Mac
    Helps when you ask for help to tell us which Mac OS X is installed.
    If you aren't certain, click your Apple menu icon top left in your screen. From the drop down menu click About This Mac.
    The version is noted there.

  • Mac Mini - Flashing Folder Icon / No boot / Loud fans

    I recently got my Mac Mini back after 8 months of it being 'elsewhere' (someone had it, tried to gain access, failed because I have filevault).
    When I first got it back yesterday I turned it on, booted and then logged in, noticed no sound, and system was saying there was no sound card. The computer wasn't lagging or freezing whatsoever, so I reset it and still no sound.
    I open it up and what do you know, someones opened it (I assume to get to the HDD) and had unclipped the sound card ribbon. Reseated that and put it back together, turn it on and finally a chime, but then nothing, White screen, and fans turn on full blast. I reset it, same thing. Reset it about 10 times, only thing I noticed was half the time my mouse cursor would show and let me move the cursor around.
    So I take it apart again, check all connections, restart, same symptoms.
    Pull it apart again and try installing 1 RAM chip at a time, same symptoms.
    I tried booting it with resetting PRAM, NVRAM, I tried starting holding option, pressing c, everything, and nothing happens! Same symptoms. I tried holding down power for 10 seconds, hear a long beep, then chime, same symptoms!
    So I take it apart again, take out hard drive, check connections (all ok), put it back in, same symptoms.
    Anyway I got angry so i turned it on and left it doing it's White screen business. Come back 45 minutes later, flashing folder icon with '?'
    I reboot, wait 15 again, same folder icon, loud fan, nothing else.
    This doesn't make sense, HDD was fine 5 minutes before, no noises at all, no lag, no errors. I didn't touch the hard drive previously to the problem, and now nothing is helping. I've had the hard drive replaced 2 years ago due to near failure, but saved all data by cloning the disk, the HDD isn't old!
    I just bought an external HDD enclosure, should arrive soon, and a new HDD, issue is this disk is filevaulted, I'm scared my data is going to be lost for good.
    What can I do? I've lost my OS X disc, but judging by the computer being unresponsive to other commands at boot I doubt it would boot a CD anyway.
    Please help.
    Thanks

    Whew, what a bad ride.
    Does it also have Firmware password protection in Mac OS X ...
    http://support.apple.com/kb/HT1352
    It would block usage of all the startup keys, like C, N, T, D, CMD+s, CMD+Option+p+r, CMD +v, Option, and Shift, as well as booting from anything but the Hard Drive.
    Force Removing Password Protection
    1) Add or remove DIMMs to change the total amount of RAM in the computer.
    2) Then, the PRAM must be reset 3 times. (Command + Option + P + R).
    http://www.securemac.com/openfirmwarepasswordprotection.php
    Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
    /sbin/fsck -fy
    Repeat until it shows no errors fixed.
    (Space between fsck AND -fy important).
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
    http://docs.info.apple.com/article.html?artnum=106214

  • MacBook won't start - shows flashing folder icon with question mark

    When I attempted a Spotlight search, my MacBook froze. I shut it down, and when I start again I get the sound, the blue screen, and then a flashing folder icon with a question mark. I tried starting with Option pressed down; didn't work, and now I don't even get the flashing folder icon, just the blue screen. Any suggestions?

    The flashing folder with question mark means the computer can't find a working OS on the computer. This may mean your hard drive has failed.
    Try holding the Shift key while starting up the machine. This puts the machine into Safe Mode.
    If you have your install discs, insert Install Disc 1 and start up the computer while holding down the C key. When the Installer has loaded, choose a language. From the Utilities menu, choose *Disk Utility*. Does your hard drive show up here? If so, click on its icon (the one with manufacturer name & capacity, NOT "Macintosh HD"), and then click on the *Repair Disk* button.
    If booting in Safe mode doesn't help or you don't have your install discs, you need to bring the computer to an Apple store and have the folks there look. If Disk Utility doesn't list your hard drive, it has very likely failed and will need to be replaced. If your machine is out of warranty, you're better off replacing it yourself, as it's very easy to do.
    ~Lyssa

  • I have a five week old mac book pro and today when it was powered up the screen went white and is shows a folder icon with a flashing ?...

    Any body had similar problem, can I fix it?

    A flashing question mark or globe appears when you start your Mac

  • After I reset my Ipod nano the folder icon with excamation point show up.

    My Ipod nano was freeze, so I reset it and after that, It shows the folder icon with excalmation point,why does that happened? how can i fixed_?

    Check these out:
    iPod Folder with Exclamation Point After Disconnected From Computer
    iPod Folder with Exclamation Point After Turned On
    Put iPod into Disk Mode Manually – Worked for Me!
    Good Thread About iPod Sad icon/Folder with Exclamation Point
    By the way, you might want to post in the iPod nano forums from now on, as you will most likely get more help in there in the future.
    I hope this helps!

  • On start up my mac is showing a folder and flashing question mark sign?

    On start up my mac shows a folder sign & flashing question mark?? Help and Why??

    Question (?) Mark, Blinking Folder, or Gray Screen at Startup
    These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
    A flashing question mark appears when you start your Mac
    Mac OS X- Gray screen appears during startup
    In most cases the problems may be caused by:
    Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
    Boot drive's directory has been corrupted - Repair with Disk Utility.
    Critical system files are damaged or deleted - Reinstall OS X.
    The disk drive is physically non-functional - Replace the hard drive.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
    Boot From The Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstall Snow Leopard Without Erasing The drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing The Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Help! Ipod nano with exclamation point folder icon.

    My ipod nano (1st gen) showed a folder icon with exclamation point after an unsuccessful sycronization. Then the ipod didn't work anymore. I tried several times to use the reset method mentioned here http://docs.info.apple.com/article.html?artnum=61003 without any success. Basically, after I force it into disk mode, my computer still did not recognize it and asked me to insert the disk (when click with right button).
    Since I bought it more than one year ago, the warranty has expired. So return it to apple is probably not a viable option. I am wondering whether there is anything else I can to to fix the problem? Does anybody know what kind of problem it might be, hardware problem or just the software screwed.
    Thanks in advance.

    In my opinion, iPod with exclmation mark folder icon means a corrupted OS with an iPod.
    . Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    or if you cant find a Mac
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iTunes 7 and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0

  • IPod with folder icon, won't reset

    I bought my third iPod at the end of summer, an iPod photo 60 GB. It has worked perfect until 2 days ago, when it suddenly froze. I rebooted it, but the display showed a sad iPod. Checked the support files and tried to put it into Disk mode, but it didn't work, so I just left it in the charger overnight, which, surprisingly enough, managed to solve the problem for a while. When I woke up, the iPod was OK.
    So I took it out for another day of adventures. At first it skipped all of the songs from an album that I had recently transferred to my iPod, but it played older songs. But after maybe 20 minutes, it froze again. Another reboot and another sad iPod icon. This time, however, I managed to put it into Disk Mode, and restored it to factory settings. It didn't restart itself after the restoration (waited for an hour or so), so I manually removed it from my desktop and unplugged it. On the screen there is a folder icon with an exclamation point. Replugged it, and it appears on my desktop and in iTunes, and starts filling up with songs. When it's finally done I remove the iPod from my computer. Once again I see the folder icon.
    Each time I connect the iPod to my iBook it's on my desktop and in iTunes. The software can't be out-of-date because there hasn't been an update since I bought it.
    Restoring it to factory settings shouldn't have harmed the iPod - or should it?
    It's charged, it's filled with music, at least according to iTunes. It's just that STUPID folder icon that I can't get my head around. Why is it there and what can I do to get rid of it?

    Well, here are the two pages that might be useful to you:
    iPod does not appear in iTunes or on the desktop, an exclamation point or sad iPod icon appears onscreen
    iPod shows a folder icon with exclamation point when you turn it on
    Those give some possible ways to deal with the Sad iPod/Folder problems. The first step in the Sad iPod steps involved putting it in disk mode:
    Putting iPod into Disk Mode
    If you can get it into disk mode, you may be able to get your music off. I hope so. But I also hope that if you do, you make sure to have a backup of all your music; since Apple only allows one download, it should be protected as any other investment would be.

  • Ipod Problems: Folder Icon

    i got my 30gb 5G ipod for Christmas and i have had a few small problems, But this is the worst, When i connect my Ipod to my Windows PC it resets itself, Shows the folder icon and then turns off. Ive trawled the support with no avail.The Ipod Updater Freezes when my ipod is connected, no responce from that. Any ideas?

    Did you check out this page? "iPod shows a folder icon with exclamation point when you turn it on" http://docs.info.apple.com/article.html?artnum=61003
    Also you could try deleting and reinstalling the updater.

  • BIG whammy of a problem, code 1418 and folder icon with exclamation mark!!

    I think my ipod's gone to ****. A while ago while walking home listening to my ipod, it just stopped. Looked at it and saw the folder+ !. I searched the net and saw that it probably just needed to be restored. So i tried to restore it, it froze. Updated to newest iTunes, but it wouldn't work on my comp. Anyways, I've formatted my comp, so i'm starting new here. My iPod still has that icon, so i connected it to my comp, and got it to start restoring, only part way through it to get the 1418 error code. It's an old 20gig 3rd gen, but it always worked fine. And actually now as I'm typing this, I can't get the bugger to connect to my comp anymore. It just keeps showing the folder icon. I have no idea what to do with this anymore. I've read tons of post in regards to 1418 but they're all in relation to nanos, video ipods, and shuffles. Any help would be amazingly appreciated because I can't afford a new iPod. Thanks!

    i connected it to my comp, and got it to start restoring, only part way through it to get the 1418 error code
    Let's get some information for the Apple Engineers. Please copy and paste these questions into an email, make the subject of the email "iPod error report", add your answers, and send the email to Roy at Apple.
    1. What error code are you seeing?
    2. When are you seeing it (restoring or updating your iPod)?
    3. Which iPod do you have?
    4. What version of Windows do you have?
    5. What Windows service pack do you have installed?

  • Folder Icon in Trees

    I'm using Forms 6i and need to use Hierarchial trees. I've never worked on tree items. I have somehow populated data to the tree but my problem now is i'm not able to display a folder icon for the nodes. I would be very grateful if someone could explain me from the basics, of how to show a folder icon in the nodes, also the icon should be different when a node is expanded ie. folder to be opened when node expanded and closed when node collapsed.

    Anitha,
    the initial icon can be set when creating the tree. There are two ways to create a tree, one to use a query and another to use a record group.
    To set icons due to a user action (e.g. a node selection):
    DECLARE
    htree ITEM;
    current_node FTREE.NODE; 
    find_node FTREE.NODE; 
    BEGIN
    -- Find the tree itself. 
    htree := FIND_ITEM('tree_block.htree3');   
    -- Change the icon of the clicked node.  The icon name
    -- is "Open"
    FTREE.SET_TREE_NODE_PROPERTY(htree, :SYSTEM.TRIGGER_NODE, Ftree.NODE_ICON, 'Open'); 
    If you running in client/server, the icons need to be in the directory specified by the UI_ICONS registry variable. On the Web the icons must be in a gif format and in the same directory or archive you use for the iconic buttons
    see: http://otn.oracle.com/products/forms/pdf/webicons.pdf
    Frank
    Frank
    END;

  • Folder icon nightgmare

    Got ipod nano 2g for Christmas. Was fine first time I used it. Plugged into usb to charge. Do Not Disconnect icon appears. Disconnected properley but I am left with folder icon and ! mark. Also tried resetting by buttons. Battery icon full but with lightning bolt at end. Charged to two DAYS so should be full!!! Do I restore and transfer my music back over or do I send it back to where I bought it.
    I never thought it would be so hurrrrrrendous owning one.

    Disconnected properley but I
    am left with folder icon and ! mark.
    iPod shows a folder icon with exclamation point when you turn it on
    Regards
    Colin R.

Maybe you are looking for

  • AOL Email

    Hi Newbie to Windows 8 phones. Just made the leap from iOS. Trying to set up email. Please can you tell me how to add my aol account? Many thanks SnowWight

  • How to partition an external HDD to NTFS and Fat32

    Hi guys, I wonder if you can help me.... I'm trying to partition my WD external HDD into two. I want the first partition to be formatted as NTFS as I will be using this part with only windows. The second half I need to be able to use it on both mac a

  • If I sell my ipod on, will the buyer have access to my information?

    I could be selling my ipod to a friend and would like to keep the apps (a particular app) on the ipod, but erase everything else (Photos, Account Details .e.t.c.) and also unassociate said ipod with my itunes account. Can I do this? If so, how?

  • User fonts vs all fonts

    Hi- I am trying to fix an issue I have with creating a new user account and thought that it might be font related. So I opened up Font Book and Validated all the fonts and all was fine. I noticed though that some fonts under All are not under User. W

  • Unable to set 'encoding' in XML prolog

    Hi, we're trying to set 'encoding' in an XML prolog with the following code in an 11.2 environment: - SQL> set serverout on size 1000000 SQL> declare 2 l_domnode dbms_xmldom.domnode; 3 l_domdoc dbms_xmldom.domdocument; 4 begin 5 l_domdoc := dbms_xmld