My Mac shuts down when I close the lid. Why??

I want my screen/Mac to sleep, how do I do that? Heeelp!

Try Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Hope this helps.

Similar Messages

  • MacBook Pro shuts down when i close the lid

    Hey,
    My MacBook Pro shuts down when i close the lid.
    It started to do this one or two times, but now it is every time.
    I have the latest battery update, so this should not be the issue here..
    Any sugestions??
    I have started to suspect the it might be some faulty conecctions or somthing..

    If it's unable to go into the proper sleep state for some reason then it will do that.
    Run /Utilities/Console and click 'All Messages' top left then close the lid, wait a minute then open it again - if it's shut down then reboot and open Console again and check the latest log lines looking for 'sleepimage' - it should give you an indication of what happened/didn't. If you're not sure what it all means post _just those lines_ here.

  • How do I get my lap top to shut down when I close the lid?

    I have tried to switch on the function that shuts down my lap top when I close the lid but am either dumb or lazy and gave up too quickly.... any help would be greatly apprecated.

    Thanks Poikkeus
    My mac goes to sleep when I close the lid pretty quickly but when I open up the lid it opens up again where I left off.
    Some nice person burgled me some time ago and stole my mac so I want to force my mac to close right down so when someone else opens up they are forced to open up in guest.  I can then track my mac without risking them accessing my personal details etc.

  • Laptop shuts down when I close the lid

    I just recently purchased an HP Pavilion x360. It was working fine until HP did an update and now everytime I close the lid, the computer shuts down and has to restart when I open it. I've checked all of the power settings, including the one that allows you to specify what it should do when I close the lid but having found nothing that helps. Any suggestions? Robby

    Hi Robby, Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that before you did a HP update you were able to close the lid and reopen without Windows restarting, but no longer.You have checked the power management setting and the option for what happens when you close the lid, but no change. I suggest you do a scan for corrupted files. This process will also try to repair any corrupted files it locates.Go to the command prompt and right click on it and run as administratorType sfc /scannow and press enterWait for this to complete and restart your notebook. Windows 8 has a built in troubleshooter you could also try.Press the Windows key + C to open charmsType troubleshoot performance and press enter.Follow the on screen prompts. If that did not help. you can do a restore back to before you installed the update. You also have the optiion to do a Refresh Your PC to Resolve Problems (Windows 8).  To be on the safe side I would backup your personal data first, to ensure no personal data is lost. You could also do a recovery back to factory.  Performing an HP System Recovery (Windows 8).  You will receive a prompt to backup your personal files to prevent data loss, if you have not done one recently, I  suggetst you do one now.Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8) With the notebook being a fairly recent purchase, you could also contact HP support for assistance.  They can remotely log onto your system to aid with locating and resolving issues.    Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region HP Technical Support Sitemap.    

  • The new version of firefox does not shut down when I close the browser it continues running in the background. In addition it opens Adobe Reader for a brief time and then that closes. Everything worked fine before this new version.

    Firefox automatically loaded a new version recently. The new version does not shut down when I close the browser it continues running in the background. In addition it opens Adobe Reader for a brief time and then that closes. Everything worked fine before this new version.

    See "Hang at exit":
    * http://kb.mozillazine.org/Firefox_hangs
    * https://support.mozilla.com/kb/Firefox+hangs

  • Pre Turns Off or Shuts Down when I close the keyboard

    Is my pre screwed or is it OS?  
    It shuts off, not the version that other people have had where you have to pop the battery (the power button still works to turn it back on) out to get it to restart.  Anyway, it shuts off when I slide it closed.  I thought maybe something loose so I did it very slowly, not allowing it to even go all the way, the minute that the sensor tripped it back into "no keyboard" mode it turns off.  
    It's especially bad when on bluetooth...happens every single time.  
    Is there a solution for this.  Please palm, a lot of people are having this problem and there is no answer yet? 
    Post relates to: Pre p100eww (Sprint)

    Palm is on deathwatch.  The Pre could have really kept them afloat, but there are too many problems with it.  When I first got my Pre in June, it was awesome!  Everything worked great.  But now, I am always having problems with it.  Here is the list:
    1. Pre turns off or shuts down when I close the keyboard.  (I had to make this one the first on the list since it is the topic.)
    2. Pre turn off or shuts down for no apparent reason and the only solution is to remove the battery, wait a second, put the battery back in, then turn it back on.  This takes forever.  Plus, because I have removed the back so often, my Pre squeaks when I am typing (from the plastic).  It is very annoying.
    3. The navigation system has a glitch where most of the time, it cannot find my current location.  The message says to make sure I am in clear view of the sky, but i always am.  There are many posts about this problem in other sections.  There are some solutions, and the often work, but it takes 5 minutes to reset the system.  It is a beating.
    4. The navigation system voice is usually very clear, but sometimes, the voice will skip over the names of streets as she is calling out the directions.  Ex. "Turn right on ________ Drive."
    5. Sometimes the keyboard will stop working.  I have to remove/replace the battery.  Again, this is time-consuming and further contributes to the squeaking problem when typing because you have removed the back so many times.
    I like Sprint because I can get unlimited data, txt, and mobile-to-mobile calling for $70/mo.  So, I hope that someone comes out with a great touch-screen phone (not the BB Storm), because I want to stick with Sprint.  If you go with an iphone, you have to get AT&T, which will cost you at least $100 for the same.  That is a $360/yr difference!  I am sticking with Sprint.

  • Shut down or just close the lid

    Im a new Macbook Pro user. Do i need to shut down every thime im finished using my macbook pro, or just shut the lid. If i just shut the lid what power state will this put the macbook into? Im keen to make the most of my battery life.
    Many thanks
    Steph

    Hi, i have a Macbook Pro 13 inch. And i usually just closed the lid after i have finished working with it.
    Then i used it again tomorrow morning for work.
    But my friend suggested that it is not safe for mac book pro users to just close the lid without shutting down the mac. It is said that if the MBP still using standard SATA Harddrive then it is wise to shut it down first, because the Harddrive still have some sort of mechanism. It is different from the SSD drive.
    If the Mac uses SSD drive than its fine just to close the lid without shutting down.
    Is it true? maybe someone has some informatioan about this. it would very helpfull coz i really love my MBP
    thanks

  • Macbook shuts off when I close the lid

    How do I set the macbook up to stay on when the shut the lid? I listen to talkradio and sometimes like to close lid and carry macbook around but it automatically shuts down when I do that. Can I change these setting?

    http://img71.imageshack.us/img71/5628/picture1vs9.jpg

  • My Macbook keyboard and trackpad become unresponsive for periods of time when I shut my mac off or when I close the lid.

    Sometimes it starts working again when I turn it back on and sometimes it doesn't. It's not the keyboard. I installed a new one and still have the same issues. I am not sure what to do to fix this problem. Has anyone experience this before? Any help would be much appreciated.

    OK. That makes much more sense.
    I would like you to create a new admin user with Users & Groups for testing purposes. Turn off auto-login if you have it enabled. Restart the computer and log into the new account. Test if the problem still exists or has ceased. If it has ceased then the issue is most likely something in your user account. You can start by using software like CockTail, Onyx, or Mountain Lion Cache Cleaner (look for them at www.macupdate.com) to clean up system, user, and font caches, check for old log files, etc. Do this all in your usual account, btw.
    See how that helps your situation. If it's not in your user account, then it's a system issue. You can then try reinstalling to see if that helps:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • I recently got my GPU error fixed, but now my MacBook Pro shuts down whenever I close the lid.

    I bought my computer in July 2010.  After 3 and a half years I finally discovered there was and an issue.  GPU error. Fine. ok.  I went to the store and even though they were nice enough to fix it for free, I'm now having another issue.  Whenever I shut my computer lid, the screen and keyboard doesn't work.  I can hear the computer fans but no matter what I do I can't get the keyboard or screen to work.  In order to get it to turn back on, I have to hold down the power button until I hear the inside turn off.  Then I have to hold the power button again to turn it back on.  DId they give me a faulty part when they fixed it? Or is there something I can do? My computer is in great condition. No scratches, never been dropped, etc.  HOW DO I GET MY SCREEN AND KEYBOARD TO WORK?

    Try resetting the  SMC http://support.apple.com/kb/ht3964
    If not take it back to where you had the work done.

  • Powers off when i close the lid

    Hey all,
    I am having what seems to be a problem with many others with HP laptops.
    Recently after an HP update, my laptop shuts down when i close the lid.
    It seems as though, something in the update has corrupted something.
    Im not sure if HP needs to put out an update to correct this issue, or if I need to fix the BIOs somehow, or what.
    If anyone is familiar with this issue, and can assist me in fixing it, it would be greatly appreciated.
    Please keep in mind before replying that....
    1. this was not happening before and is happening now
    2. I have gone into the power settings and confirmed that it has been switched to "do nothing" when the lid closes
    3. only started happening after HP did an update
    Thanks in advance

    Hi @mike16mak ,
    Welcome to the HP Forums!
    It is a dynamite place to find answers and ideas!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I see that after doing an HP update your notebook shuts down when you close the lid.  You have checked the power settings and they are set at do nothing.
    I would try this step first.
    Go to the command prompt and run as administrator.
    Type powercfg -restoredefaultschemes and press enter.
    You can run the HP Support Assistant to aid with HP updates.
    You could consider doing a restore back to before the HP update?
    Have you ran the built in  Windows troubleshooter?
    If you would like further assistance, please provide your exact model of HP notebook and your Operating System.
    How Do I Find My Model Number or Product Number?
    You may also consider contacting HP support for assistance. They can remotely access your system to help overcome difficulties.
    Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
    World Wide Phone
    Best of Luck and have a fantastic weekend.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Why does my macbook pro keep shutting down by itself when I close the lid?

    My macbook pro is shutting itsself down when I close the lid. Does anyone know why this is happening?

    Solution may be found if you search in the "More Like This" section over in the right column. 

  • G4 HiRes Powerbook shuts down after having closed the lid

    I own a less then 6 months old 15" 1.67 GHz HiRes Alu Powerbook. Every now and, after having closed the lid, I have observed that when I reopen the pb it has shut down. The battery is still fully charged, so it can't be the case that the pb has not gone to sleep and it has thus discharged the battery. I also think it has happend with both the power adapter connected and disconnected.
    In the past I deleted power managment pref files (can't remember the details) as advised by Apple in their tech papers, which resolved sleeping problems (not mine though :-))
    All tips appreciated.
    Thanks, Robert
    Powerbook 15" HiRes   Mac OS X (10.4.6)   Powerbook 15" 1.67
      Mac OS X (10.4.6)   Powerbook 15" 1.67
      Mac OS X (10.4.6)  

    Occasionally with mine, it only appears to have shut down.
    I close the lid, and there is no pulsing light. the light is off as though its shutdown.
    then if I open the lid, hit a key or two, wait, then close it again, and wait, the pulsing light will appear and if I then open it, it will wake from sleep.
    Weird, but you might give it a go. This seems to happen often when running video-related applications, but I have no real data here and do not know what causes it. After I discovered this problem, I use it now to prevent having to lose my work and restart.

  • MB tiger 10.4.11 won't shut down but just go to sleep when I close the lid

    Hi,
    I'm new to this forum but I'm desperate for your help with my Macbook 10.4.11.
    Recently it doesn't shut down properly and each time I shut it down thru the green apple, it just doesn't shut down definitely but after some seconds, the screen turns to black but my mouse's light is still on. When I close the lid, the sleep light is on, too.
    I've tried many advices like disabling remote facilities, e.g. Bluetooth, but it won't help. I've updated all softwares and even SMC but that won't help either. Did anyone have the same problem like mine and more important, have you had the answer yet??? I'm fed up with pressing the power off button each time.
    For more info, I've installed boot camp and windows but after that, I've uninstalled it and reinstalled brand new Mac OS so there's no way that the problem comes from Windows.
    Thanks in advance and waiting desperately for your help...

    Hi NOTHING SPECIAL, and a warm welcome to the forums!
    How much free space is on the Hard Drive?
    Have you done any OS or Disk Maintenance?
    At this point I think you should get Applejack...
    http://www.versiontracker.com/dyn/moreinfo/macosx/19596
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 5 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 5 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    See if it does better then after a restart or two.

  • When I close the lid on my retina MacBook Pro with Thunderbolt and it goes to sleep, I cannot wake it without shutting it down and restarting it.  Called Apple tech and they did not have a solution.  Any ideas?

    When I close the lid on my retina MacBook Pro with Thunderbolt and it goes to sleep, I cannot wake it without shutting it down and restarting it.  Called Apple tech and they did not have a solution.  Any ideas?

    Try these places:
    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions 
    http://www.apple.com/support/macbookpro
    Mac OS X Help 
    Isolating Issues in Mac OS
    http://support.apple.com/kb/TS1388
    https://www.apple.com/support/osx/
    https://www.apple.com/support/quickassist/
    http://www.apple.com/support/mac101/help/
    http://www.apple.com/support/mac101/tour/
    Get Help with your Product
    http://docs.info.apple.com/article.html?artnum=304725
    TimeMachine 101
    https://support.apple.com/kb/HT1427
    Mac OS X & Mountain Lion Community
    https://discussions.apple.com/community/mac_os
    https://discussions.apple.com/community/mac_os/os_x_mountain_lion?view=discussio ns
    Recovery Mode
    http://support.apple.com/kb/HT4718 

Maybe you are looking for

  • Will Vista 32bit serial number work on 64bit Vista?

    Hi, I ordered my T400 with 32bit verison of Vista business but I now need to switch to 64bit version - does anybody have experience in trying it? Or do I have to buy new Win Vista 64bit?

  • Saved contacts disappear from new iphone

    Saved contacts disappear from new iphone , might be the reason that same apple id used for 2 phones , we need to have solution

  • Agent Assignment for tasks

    Hi, i have created a ECM WF. Now i wanna do d "Agent Assignment" Requrement is if User A checks the ECR then User B shud approve it. If user X checks the ECR then User Y shud approve it and so on. Thus my requirement is Hierarchy based i.e. depending

  • Device Weight: Route Pattern Vs IP Phone

    Hi, we are starting the planning for removing two CO class GTD5 switches that route 28,000 DID numbers for the County. The switches are +16 years old and maintenance is expensive. Our Callmanager cluster is designed to replace the existing phone infr

  • My bluetooth headset is not working with my iPad2.

    I have also tried this headset with my Android Razr and I am having the same problem: the devices will "pair," but sound will not come out of the headset. Instead the sound continues to come out from the speakers. From what I have learned, this means