My Mac will not accept CDs or DVDs.  They eject as soon as I push them in. My Mac is 27 inch mid 2010 running 10.9.5

My Mac will not accept CDs or DVDs.  They eject as soon as I push them in. My Mac is 27 inch mid 2010 running 10.9.5

CD/DVD Loading Problems                        
CD/DVD Drive - Troubleshooting See troubleshooting section.
CD/DVD Drive - Troubleshooting (2)

Similar Messages

  • My IPhone is set up with an internet  downloaded firmware of ios7 because my phone would not restore, the system has failed and I had to do a manual erase fro  within the phone. My computer will not accept the phone because they say it's a "Developer?"

    My IPhone is set up with an internet  downloaded firmware of ios7 because my phone would not restore, the system has failed and I had to do a manual erase fro  within the phone. My computer will not accept the phone because they say it's a "Developer?" Help. I cannot not even get passed the activation step on the computer or phone because it will not activate the device.

    Hello buddyacw
    You would have to restore the iPhone. Download the latest version of iTunes and then follow the steps in the article below to get it working again.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Mac will not accept CD

    My Mac which is 3 years old will not accept anything in CD drive
    There is nothing in there - any ideas

    When you say "Will not accept DVD", do you mean it takes them in and ejects them, or it just wont take them in?
    Thanks,
    Ollie.

  • Qosmio G30: CD/DVD drive will not burn CDs or DVDs

    hello everyone..
    I am using a G30 notebook and from the moment i bought it i couldnt burn CDs nor DVDs using the built in rewriter!
    Every time i insert a blanc CD/DVD into the drive, it cant be read and an error message appears (E:/ is not accessible, incorrect function) when i try to click on the CD/DVD ROM.
    If anyone has any idea on what to do, please share it.
    Thank you

    Hi Mohamed
    The same suggestion you can find here in this posting:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=17212&messageID=62862
    PS: If you use or have installed two burning applications on the OS so remove one and use only one burning program; for example Nero.

  • My dvd player is no longer working and my mac will not accept my installer disc

    my iphoto is no longer working either, as well as my dvd player, so i decided to reinstall, using my installer disc, but my computer turns it around a few times, then spits it out! what can i do?
    I updated recently to os x maveric, that is when my iphoto stopped working, yet i have previous photo;s in the iphoto gallery, the dvd stopped working a while ago for no reason. 
    Any ideas?

    It's not possible to restore the operating sysem from your install disc on a Mac running v10.9 Mavericks.
    The only way to restore OS X is to startup your Mac while holding down the Command + R keys so you can access the built in utilities in OS X Recovery
    Try iPhoto and the DVD Player app after you restore OS X.

  • HT1338 DVD drive in mac  will not ply DVD's

    My DVD drive in mac  will not play full size DVD's,It says system extension cannot be used,please help.Thank you

    Go to your OS Help Menu.  In the search field type dvd
    Click on all the troubleshooting topics & Support Articles that pertain to  your issue.
    You can also do the same in Disk Utility.  Open same up.
    At the bottom left of the window, click on the purple button w/the "?" in the middle.
    This will bring up the Help Menu.
    Try a different brand. 
    CDs
    FUJI
    TDK
    Verbatim
    Taiyo Yuden
    DVDs
    Maxell
    Taiyo Yuden
    Make sure the DVDs are not dirty, smudged and/or scratched.
    http://docs.info.apple.com/article.html?artnum=50448 
    Cures for an uncooperative CD/DVD drive
    Your drive may need cleaning.  Cleaning kits can be purchased from any store that sells CD/DVDs.

  • HT201240 Macbook goes into "Safe Boot" mode when I start it but it will not accept my password to complete the boot.

    When I start my Macbook it tries to start in Safe Boot mode and it will not accept my password.  I have tried to reset the password by inserting the "Mac OS X Install" disk and restarting while pressing C but that process has no effect.  The same Safe Boot screen appears and again it will not accept my password.
    I am not sure what version of MacOS X I have as the disk is now in the machine and it will not eject.
    Any suggestions?

    You can eject the disc by depressing the track pad/mouse at startup.
    Are you depressing the Shift key at startup to make the Mac boot in Safe Mode?
    Here's the instructions if you have the discs.
    Mac OS X: Changing or resetting an account password
    http://support.apple.com/kb/HT1274?viewlocale=en_US
    Changing your administrator password
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh655.html
     Cheers, Tom

  • Why is not Windows 8 natively supported on MacBook Pro (13-inch, Mid 2010)?

    Hello,
    Can somebody from apple say why they don't add native support of Windows 8 for MacBook Pro (13-inch, Mid 2010) when it is supported on 15-inch model?
    Looking in: http://support.apple.com/kb/HT5634
    I know that Windows 8 is possible to install and use, but I think it does not make sense to limiting just 13-inch model in bootcamp
    Thanks

    Welcome to the Apple Support Communities
    It's a restriction, because the Mid 2010 13-inch MacBook Pro is completely compatible with Windows 8 (it meets all its requirements), but Apple didn't want to provide Windows 8 Boot Camp drivers for it. You can run Windows 8 if you want, but it won't work properly.
    Apart from that, there are some how-to's in the Internet in order to install Windows 8 Boot Camp drivers in unsupported Macs

  • Hi  can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why do i need to do some settings for it ?

    Hi  can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why? do i need to do some pre defined  settings to run the cd's and dvd's ?

    A .exe file is a Windows executable. OS X does not run Windows programs. If you need to use .exe files then you will need to install Windows on your Mac:
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    Install the Apple Boot Camp software.  Purchase Windows XP w/Service Pak2, Vista, or Windows 7.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • MBP will not accept CD media, but plays DVDs fine...

    My Macbook Pro 17" (late 2008) will not accept any type of CD media, but will accept DVDs and plays DVD movies fine.
    Store-bought music CDs, CD-Rs & RWs I burned myself from iTunes, data CDs -- all simply eject shortly after insertion. I have tried using a laser lens cleaner (SkipDr, with cleaning brushes on the disc) but no luck.
    I see I'm not alone. Posted this in another thread earlier this week, and many others having the same problem. We all started having this problem at roughly the same time... Late May or so.
    Anyone have a clue what's up with this? Hoping for an OS patch or firmware fix, rather than a "buy a new drive" fix, natch!
    Thank you. Any help appreciated!

    Wow. Thanks for all your helpful, thoughtful and insightful replies! Lol.

  • My mac pro will not accept mountain lion how do i access older os

    my mac pro will not accept mountain lion how do i access older os

    Choose About this Mac from the Apple menu and check the processor.
    If it's a Core Duo, it can only be upgraded to 10.6.8; Mac OS X 10.6 DVDs are available in the online Apple Store.
    If it's a Core 2 Duo, follow the instructions for the Core Duo, phone the online Apple Store, and order a download code for Lion 10.7.
    (76584)

  • DVDPlayer not recognizing DVD. I have an IMAC (10.7.4) using DVDPlayer (vers. 5500.26.11) and will not recognize/play a dvd movie...it thinks it is a blank dvd.  The dvd movie plays fine on my Mac Book Pro (10.6.8) on the Pro's DVDPlayer (vers.5.4).

    IMAC DVD Player does not recognizing dvd movie . I have an IMAC (10.7.4) using DVDPlayer (vers. 5500.26.11) and it will not recognize/play a dvd movie...it thinks it is a blank dvd. The IMAC will play rented dvd movies.   The dvd movie plays fine on my Mac Book Pro (10.6.8) on the Pro's DVDPlayer (vers.5.4) abd in my external Sony DVD Player  The dvd move was made/burned on a PC.   Why will a dvd movie play on my Macbook Pro and not my IMAC?

    Hello:
    This is not an area I have much experience in......I rarely insert DVDs and I have never had a similar problem.
    When the DVD is in the drive (and DVD players is open) click on File>get disk info.
    Barry

  • My CD/DVD drive will not accept a disk anymore. Any ideas?

    My CD/DVD drive will not accept disks anymore. Any ideas to make this work short of a very expensive replacement?

    Read the os Help menu. 
    Apple Portables: Troubleshooting the slot load optical disc drive  
    Cures for an uncooperative CD/DVD drive

  • New CS6 on disk for Mac will not take my valid serial number; do I need to register the product before it will accept serial number and load on my Mac Book Pro?

    New CS6 on disk for Mac will not take my valid serial number; do I need to register the product before it will accept serial number and load on my Mac Book Pro?

    Hi Erwin,
    Please go through the below forum link and check.
    https://forums.adobe.com/thread/1079210
    Regards,
    Anand

  • I have an IMAC and the DVD player will not accept DVD's.  As they are inserted, they are immediately ejected.

    I have an IMAC (OS X 10.7.5) and the DVD player will not accept DVD's.  As they are inserted, they are immediately ejected. How do I fix this?

    try resetting the System Management Controller (SMC).

Maybe you are looking for

  • Zen Vision M 30gb, used to be able to download music from I tunes, can't now, need he

    I had another computer with I tunes loaded, also used Zen vision M on it along with I Pod, new computer has both products downloaded on it, but for some reason it wont recognize the Zen or let me download music from the i tunes library like i used to

  • Send and Receive script for Outlook 2011 not working

    I used to have a script to send and receive mail in Entourage. When I change the script to: tell application "Microsoft Outlook" connect to every pop account connect to every imap account send end tell It hangs at the second line and I am not able to

  • Problems with RFC transport confirmation in a BPM

    Hi everyone. I have an interface that is stopped now. The problem is that XI tried to send a RFC and the R3 backend is down. Now i have this interface waiting for a transport confirmation (since last sunday morning). is there any way to 're-send' the

  • [solved] console doesn't refresh using nano

    the problem presents when exiting nano after editing a file in the console (ttyX). the screen doesn't clear, and keeps displaying the last thing nano was showing. also, if something outputs some text on the console while nano is open, the text is ech

  • Latest software update (I think 10.5.6) caused several problems

    So here's what happened: - I ran Apple Software Update and restarted - After restart, there was some sort of error that I think was regarding the "Digital Camera Raw Compatibility Update" (2.4) update. I re-ran Software Update and restarted again. -