My mac won't charge when it is plugged in and.....

my mac won't charge when it is plugged in and also sometimes seems to over heat. can someone help me anyone eles have this problem, i chose to buy a mac over a pc because they are not supposed to have any problrms.

It's still on warranty then.  Just head on down to your local Apple Store, with your charger.  You could have a bad power supply in the MBP.  Or a bad charger.  Either way, they'll get fixed for free.
But before you do anything, just try a couple of things that might help, though no guarantee.
http://support.apple.com/kb/HT3964?viewlocale=en_US

Similar Messages

  • Mac won't recognize when usb is plugged in

    I'm new to Mac but I can't figure out why it won't recognize when I plug in something via USB. I have tried using both my printer and iPod/iPhone. I have looked under applications and then utilities in finder and under devices it isn't there. What am I doing wrong/how do I fix this?

    When you connect an external device to your MBP, an icon should appear on your desk top.  Since your printer and your iPod use different USB cables, it does point to a problem resident in the MBP.  It seems to me that a visit to a Genius Bar at the Apple store is in order.
    Ciao.

  • IPhone 5 won't charge when plugged into lightning connector one way but if it flips then it works

    My iPhone 5 won't charge when it's plugged into the lightning connector one way but if I flip it then it works. It's not my charger because it's the same way with other chargers. What's wrong with my phone?

    Yes I've tried multiple ones and none work. My boyfriend's iPhone 5 and my brother's all work either way the charger is turned.

  • My 4th gen Shuffle just up and died after 2.5 years.  It won't charge when attached to my Mac.  Can I replace a battery or do I have to buy a new one?

    My 4th gen Shuffle just up and died after 2.5 years.  It won't charge when attached to my Mac.  Can I replace a battery or do I have to buy a new one?

    Hi Soldier7439,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Do you have the power adapter to plug into an electrical outlet?
    Apple - Support - iPod - iPod nano (4th generation) Troubleshooting
    http://www.apple.com/support/ipod/five_rs/nano4gen/#
    Apple - Support - iPod nano
    http://www.apple.com/support/ipodnano/
    Cheers,
    - Judy

  • My "4" won't turn on, won't charge when connected to charger or computer.  I've tried to reboot and it still doesn't turn on, its never been dropped or had water damage.  My warranty ran out on feb. 23, help!

    My "4" won't turn on.  It won't charge when connected to a charger or to the computer.  It's never been dropped, or had any water damage.  It looks like its brand new! The warranty ran on on Feb 23rd, help!!!

    Hello Breejumpp,
    Try Reset ( No Data will be lost )
    Press and Hold the On/Off switch (On top your iPhone) and the Home Button (Button at the bottom of your iPhone screen). Hold both the keys simultaneously for atleast 10 to 15 seconds and you should see an Apple Logo coming up on your screen, once you see the Apple logo you can then release oth On/Off switch and Home button and wait for your iPhone's Home screen.

  • It says not charging when it is plugged into my mac desktop

    My Ipad 2 says not charging when it is plugged into my computer and it does not show up on the side bar in the itunes app.

    It is possible that the USB port is not working properly as well. This support article might be of help.
    http://support.apple.com/kb/ts1591
    Sometimes all it takes is a restart - quit iTunes, restart your Mac and restart your iPad and see if that helps at all.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • My iPad2 won't charge when plugged into an outlet.

    My iPad 2 won't charge when plugged into an outlet. I've tried 12W and 10W original Apple iPad chargers as well as iPhone 4 chargers. It charges (very slowly) when I plug it into my laptop but I've tried every outlet in my house and at work with no success. So I am stumped as to why it won't work in two completely different locations when plugged into the outlet - because it's obviously not the charger, cable or the iPad batter.
    I've tried blowing out dust from the port, resetting my iPad (holding down the home and power buttons at the same time) and jiggling the cable.
    Note: I am still on iOS 6 so upgrading my OS isn't the issue.
    I would appreciate any assistance with this as it's very frustrating!

    If it will charge when connected to the computer, but very slowly, typical of a low power USB port, but will not charge with the chargers you have tried, the issue is then most likely with the chargers.  However, to be sure, take the iPad and charger and cable to an Apple store genius bar and have the technicians test them to see where the problem is occuring.

  • IPhone4 iOS 4.0.1 won't charge when turned off

    I had a 3GS that when placed in the dock (connected to my iMac which is always on) and was turned off (the iPhone that is) would charge normally and was completed in the normal amount of time (a few hours for a complete charge). When I upgraded to iOS 4.0.1, the iPhone would only charge in the dock if it was left on.
    I upgraded to the iPhone4 (4.0.1) and the same thing is occurring: the iPhone won't charge when it is turned off; only when it is left on will it completely charge.
    Because it happened with my 3GS after upgrading to iOS 4.0.1, I am assuming that it is a software issue with the new operating system.
    I have tried a restore as recommended by tech support, but that did not resolve the issue. Has anyone else had the same problem? Any idea how to fix it so that the iPhone4 can charge when placed in the dock and is turned off? Thanks.
    Message was edited by: acmd1633
    Message was edited by: acmd1633
    Message was edited by: acmd1633

    1) stop being impatient.
    We are all users like yourself... reposting one minute later is not going to get a lot of sympathy from us.
    2) Clean the dock connector with a soft, dry brush
    3) Try a different sync cable or charging device.

  • HT1476 MY ITOUCH 4G WON'T CHARGE WHEN CONNECTED?

    My i-touch4g won't charge when coneected to computers, despite using several Apple cords

    Try here:
    iPod touch: Hardware troubleshooting

  • My Macbook Pro won't charge when it's on, only charges VERY slowly when it is shutdown

    My Macbook Pro won't charge when it's on. It only charges VERY slowly when it is shutdown. Recently when it was charging shutdown, I could not get it to turn on. The only way it turned on was by removing the charger from the Macbook Pro. This only happene one time but still wondering what is going on with this battery.
    Thanks for the help!

    First see the MagSafe troubleshooting tips:Apple Portables: Troubleshooting MagSafe adapters and check to see that all looks ok.  You might want to try using another charger in case the charger is faulty.  If that doesn't help, take the MacBook Pro and charger to an Apple store genius bar and have the technicians test the system to see where the fault is.

  • Why iPhone 4 does not connect with the charger or mac but charges when it is powered off and connected?

    My iphone 4 doesn not connect with charger and mac book. however it does charges when it is powered off and connected with charger. Any clue ?

    I hope you are having a great and sorry to learn that you are having this issue;
    Since I could not check what version of the laterst firmware,  I hope you don't mind doing the following in your printer:
    Updating the All-in-OneFollow these steps to enable automated Web Services updates, and to update the product firmware.
    Important : The HP product must connect to a wireless network with an active Internet connection to receive updates. However, the product does not need to be connected to a computer.
    On the upper left side of the HP product control panel, touch the Web Services icon ( ). The product control panel displays the Web Services screen.
    Touch Settings . The product control panel displays the Settings menu.
    Touch Product Updates .
    Touch Check for Product Updates Now .
    Wait for any updates to download and run.
    If you using Win XP or later please run this tool to see if you get any errrors Click here
    Is your printer on warranty? if you do not know you can use this tool;  GO HERE.
    Hope this helps and let me know if I can assist you any further I will do my best to provide you assistance;
    RobertoR
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • I was going to use iExplorer to try to copy Notes from iphone 4 to my iMac but changed my mind.  Deleted iExplorer.  Now my Mac won't recognize when my iPhone is plugged in.  Is iExplorer the problem?  How do I fix this?

    I was going to use iExplorer to try to copy Notes from iphone 4 to my iMac but changed my mind after downloading iExplorer to my iMac.  Deleted iExplorer from my iMac.  Now my Mac won't recognize when my iPhone is plugged in.  Is iExplorer the problem?  How do I fix this? 
    I am using the Yosemite OS on m

    Hi TakesTwo2Tango,
    Thanks for using Apple Support Communities.  It sounds like you should definitely be seeing a plus sign after tapping Edit, so I would try a couple relatively easy things (closing the Music app, resetting the iPhone):
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    Cheers,
    - Ari

  • I fitted new battery but it won't charge. when plugged into wall socket gets to itunes setup but no further. when connected to computer not enough battery to turn on to get into setup. Any ideas please?

    i fitted new battery but it won't charge. when plugged into wall socket gets to itunes setup but no further. when connected to computer not enough battery to turn on to get into setup. Any ideas please?

    turnbui wrote:
    i fitted new battery but it won't charge. when plugged into wall socket gets to itunes setup but no further. when connected to computer not enough battery to turn on to get into setup. Any ideas please?
    It sounds very very much like the battery. You will need to have it replaced. If you put the failing one in yourself you will need to pay as your Warranty is now void.
    Pete

  • Phone won't charge when shut off

    I have a new Blackberry Classic and most of the time the phone won't charge when it's shut off.  It's not a problem with the charger, as the phone will charge when it's turned on.  Sometimes (not all of the time), I can get it to charge when shut off by turning the phone on and off a few times.  It's also not a question of the charging lights not working, as I've left it turned off and plugged in overnight, and the charge will be less in the morning than the night before.
    Aside from this, the END CALL button normally turns the phone on and shuts it off (as it did on the Bold) when the phone is unplugged.  When the phone is plugged in though, the END CAll button won't turn the phone on.
    All of this makes me wonder whether the phone has some underlying power/charging problems that will get worse as the phone gets older.
    Does anyone have any suggestions?

    Thanks for the advice everyone, the software update solved the problem.
    QM, even without the software update the phone should charge when it's turned on.  Is the battery so dead that the phone can't even be turned on?  If that's the case, then I would return it.  Otherwise, I would plug the phone in, turn it on, wait for the battery to charge and then do a software update.

  • Ipod won't charge when macbook is asleep?

    My ipod touch 5 charges when the laptop is open and running but once I close the lid, it stops charging. How do I fix this?

    Hope this helps.
    http://support.apple.com/kb/ht1384

Maybe you are looking for

  • EXCEPTION [TOPLINK-7056] The wrong object was registered into the UnitOfWor

    Hello, I am using Toplink 9.0.3.4. I have a one to many relationship defined. One DTOStep can have several DTOStepTexte. The XML descriptions for the relationship are: DTOStep:                     <database-mapping>                          <attribut

  • Can't Print in iPhoto '08!

    I have read another topic on this and can't understand a bit. I am looking for someone who has fixed this problem to help WALK me thru it. I am SO terrified of losing pictures that I'm at a loss right now. I am running Mac OS X (10.5.1) and using an

  • Coding for maintain the multip[le sessions

    i have 1,00,000 records in a flat file how to maintain  the multiple sessions each session having 10000 records i want coding for how these multiple sessions

  • Using Midi Reverb and chorus in the Mixer Window

    When I have my 16 midi channels of my triton in open logic with midi data inside, and I turn the Reverb or Chorus button in the mixer window, there are no affects taking place. why?? Thanks

  • Help me !(After Effect warning: Unable to create font.)

    I'm using Adobe After Effect CS4. It worked pretty well but today, when i lauch it, a message appeared. The message said: "After Effect warning: Unable to create font".Then i searched google and tried many ways: reinstall, restart windows,etc...but i