MY MAC wont start up. Realised that I am up for the 1TB seagate HDD replacement program. Has anyone experienced same issue and was addressed by replacing HDD?

Has anyone experienced a similar issue and was solved by replacing the HDD?

Does your qualify timewise (within 3 years of initial sale)?
http://www.apple.com/support/imac-harddrive/
If so, call them.
I had mine replaced last year. There are several reasons why a computer does not boot, so it is difficult to say if the hard drive was the cause. You can take yours to an Apple store and ask to have diagnostic tests run. Youc an also boot up from your backup and run Disk Utility > Verify disk on your internal to see if any errors pop up.

Similar Messages

HT1725 I am having trouble down loading a uv digital copy of a movie that i recently purchased. I keep getting error code (-50) has anyone else got this and how do you resolve it?

I am having trouble down loading a uv digital copy of a movie that i recently purchased. I keep getting error code (-50) has anyone else got this and how do you resolve it?

Hi,
Try the following steps:
1. Check windows updates.
2. Try the Microsoft Fix it in this kb to remove previous install completely:
http://support.microsoft.com/kb/2739501/en-us
3. Reboot.
4. Try installing again.
This seems helpful on the issue.
As always, thank you for your suggestion, Don:)
Regards,
Melon Chen
TechNet Community Support

Battery full - Mac wont start. Heeeelp!

I just purchased my MacBook a month ago and I love it. Now Im having a problem...
I just had this problem today. The battery is full but my Mac wont start. But when I connect it to the power adaptor - it will start. Should I change something on the Energy saver option?
I've tried to remove the battery and placed it back, but the problem is still the same. I need your help please... thanks in advance.

Yup, looks like you've joined the Macbook Shutdown/won't boot club. Mine did the same after the random shutdown problem. I reset the PMU and NVRAM and PRAM and suddenly it wouldn't boot or operate on battery. Let me guess, it works fine on the adapter, but when you pull the plug it immediately shuts down, right? Even though the battery is fully charged? I'm also from DK. Did you buy yours at Humac? Mine is being repaired as we speak, well actually it's waiting for parts (new logic board and battery) but it's taking forever. Turned it in on july 25th and it is still waiting for parts. My advice is to demand a new one, don't hand it in for repair, because I seriously don't think they know what is wrong yet. What week is your Mac(Check the serial-number and post it)?
I've heard that a lot of people got the LB replaced, but soon after the problems started again.

If I buy creative cloud for PS and Lightroom 5 for a mac can I also put it on a laptop for the price of $119 per year?

If I buy creative cloud for PS and Lightroom 5 for a mac can I also put it on a laptop for the price of $119?

one subscription entitles users to install and activate their adobe apps on up to two computers concurrently.
so yes, you can subscribe to the photographer plan and use both ps and lr on a desktop and a laptop (or two desktops or two laptops). they can both be macs or both be pcs or one of each.

My Mac wont start! what can i do?

My Mac wont start! After i restarted it for a update it just crash when i try to start it what can i do?

What and why aren't people doing something simple that has worked for the last 10 yrs:
Clone your system before you ever apply updates
Always have a working bootable backup (or two)
Keep the prior version on the shelf
Keep the combo updates around also.
It is not hard or rocket science.
There is no mechanism to undo rollback or restore check points. No utility to sandbox updates and revert as they sometimes go wrong. Things that are overdue.
MicroMat made having an "eDrive" partition s sinch to do and was its own recovery/emergency boot partition.
Carbon Copy Cloner has been around since 10.2.2, and later SuperDuper and others, Clone X etc.
A clean install is simple. Keeping your emergency boot drive for maintenance updated but with just Apple OS and essential drivers.
Use Safe Boot beforehand. People used AppleJack before updates or at first freeze or sign of trouble.
If you have more than enough room for TimeMachine, then a couple options:
Set aside 35GB is more than enough for emergency boot maintenance (Lion Recovery is nice but doesn't have everything your toolbox might want or need)...
Set up a partition large enough for your working system, again 40-80GB should be enough, you won't clone everything as you can leave your home account folders for TimeMachine if you want (but do want to copy your home Llibrary ~/Library). perfect job for Carbon Copy Cloner.
Setting up an external boot drive is 101 along with TimeMachine.
Not a good idea to have all your eggs in one basket two or more backup drives is better but...
TimeMachine - 350% your total files and changes needed to have file history archived,
Emergency OS
Clone OS
I prefer a 1.5TB minimum.would do fine for most.

Hi i am having a big trouble. MY mac wont start past the gray screen. I tried starting on safe boot, single user user mode , recovery mode. Everything it gets stuck on the gray screen i even tried reinstalling it , same thing what should i do?

MY mac wont start past the gray screen. I tried starting on safe boot, single user user mode , recovery mode. Everything it gets stuck on the gray screen i even tried reinstalling it , same thing what should i do? it lets me reinstall sometimes Sometimes.... it is weird.

orshikhfromsc,
boot from the Mac OS X Install DVD that originally came in the box with your MacBook Pro (by holding down the C key as it starts up). When the desktop appears, select Disk Utility from the Utilities menu and erase your internal disk. After it’s been erased, reformat it. After it’s been reformatted, exit Disk Utility and reïnstall the version of Mac OS X from that DVD onto your internal disk. After that version of Mac OS X has been reïnstalled, boot from your internal disk and run Software Update to get it up-to-date within that version; that should allow you to redownload and reïnstall Mavericks, if desired. If Mavericks is reïnstalled, run Software Update again to get it up to date.
If you no longer have the two grey installation DVDs, you can purchase a replacement set from either Apple or iFixit.

TS1411 My mac wont start. I turn on the power and I hear the boing sound and see the apple on a grey screen and then nothing. It goes blank

My Mac wont start up. I turn it on and hear the sound,sea grey screen withy he apple and then it turns off after a few seconds.

See this link for some tips.
http://support.apple.com/kb/TS2570">Mac OS X: Gray screen appears during startup

I have a hard drive for CD storage that needs to connect to the Ethernet router. sInce my router is not in this room, and in another room, I want to use my Mac as a router for the drive, and share the wifi. Ho do I do this

I have a hard drive for CD storage that needs to connect to the Ethernet router. sInce my router is not in this room, and in another room, I want to use my Mac as a router for the drive, and share the wifi. Ho do I do this? I gace tried the System Preferences -> Sharing, shared internet to Ethernet, but can't se ethe device on Finder

Djembe wrote:
UEFI (unified extensible firmware interface) boot requires Global unique identifier Partition Table (GPT) as opposed to the older Master Boot Record (MBR). If your existing drive is formatted in MBR, you will need to adjust BIOS settings to enable legacy boot in order for it to work properly.
Is there a performance difference between GPT and MBR? If GPT is better, I do not mind formatting the drive with it.
5. No special drivers are needed.
Thanks. What about the thunderbolt port?
7. I think Lenovo estimates 6 hours.
Lenovo says 6 hours with the 6-cell battery on its website.
BrendaEM wrote:
Hi,
There was a serious BIOS/UEFI problem with that SSD . Perhaps this thread will save you some headaches. Someone is recomending shutting off Rapid Boot in the setup, which would probable mean little with a SSD, anyway.
I read through this, and it looks like the problem was fixed in a BIOS update, which I plan to do. However, it also seems like Intel Rapid Start is not even worth it in the first place, as sleep consumes almost no power at all.
W540: i7-4700mq, K2100m, 8 GB DDR3L, 512 GB SSD
T510: i7-620m, NVS 3100m, 8 GB DDR3, 512 GB SSD

I want to upgrade my 2008 Mac pro to the latest one, will it meet the requirement for the future Software that's coming out for the next four years?

I want to upgrade my 2008 Mac pro to the latest one, will it meet the requirement for the future Software that's coming out for the next four years?.

I'd wait. What can't you do that you need? You mean you want to buy a new model, then why not wait for an actual new one, not the two year old 5,1, when you need to and have outgrown.
Yours will run Mountain Lion. yours is 4 yrs old and still supported and has life left.

Has anyone experienced this problem: I am editing in FCP 7.0.3 on a Mac 10.6.8 - I have a clip in the browser that is full frame and matched the other clips but when I drop it in the time line it becomes a fully zoomed in version of itself

has anyone experienced this problem: I am editing in FCP 7.0.3 on a Mac 10.6.8 - I have a clip in the browser that is full frame and fine and it matches the other clips in my bins but when I drop it into the time line it becomes a fully zoomed in version of itself and I can only see a small portion of the image. What's going on? I've noticed this has happened in the past randomly with other clips and it's driving me cray cray! Any help appreciated greatly and thanks in advance for taking the time

In the FCP Browser, click on the source clip that is showing up sized incorrectly to select it. Once it is selected, type Command + 9 to see the item properties for the clip. Either report those properties here, or take a screen shot of the item properties and post the screen shot here.
Next, click anywhere in your sequence timeline and then type Command + 0 {zero} to see your sequence settings. Either report those settings or take a screen shot of the sequence settings and post that screen shot here.
MtD

Just updated my mac from Tiger to Mountain Lion. Loaded Photoshop elements 11 (brand new in the box) and when I try to start it - it comes up saying - Licensing for the product has stopped working contact for help.

I just updated my mac from Tiger to Mountain Lion. wiped the computer clean and started fresh Loaded Photoshop elements 11 (brand new in the box) and when I try to start it - it comes up saying - Licensing for the product has stopped working contact for help. in Looking for help I was directed here. what do I do?

I don't know enough to not follow directions. I bought the software brand new in a sealed from factory box. Had it sitting around until - last week when I deleted flash on my computer and had to upgrade to the new OSX. Mountain Lion doesn't use iPhoto - so I had to go with something else. Since I already had this new - unopened package I opened it up. Shut down all running programs - inserted the disk and followed all the directions for installation. Still it didn't work.
I have now uninstalled it (the proper way) and am going to try again.
I appreciate your responses.
Thank you!
If this doesn't work - I am going to just buy Lightroom.

Everytime i go to plug my ipod 5 in with the charger in to the mac desktop computer a message says "USB DEVICE DISABLED" "unplug the device using to much power to re-enable usb devices" and ever since i had got that message my charger had s

everytime i go to plug my ipod 5 in with the charger in to the mac desktop computer a message says "USB DEVICE DISABLED" "unplug the device using to much power to re-enable usb devices" and ever since i had got that message my charger had stopped working even plug into a wall outlet
ps.its my only charger and i need to know if i can fix this problem or my mac broke my charger

Hey HoustonSmith, using to much power generally means a short. Do not use this cable, the lighting cables have a history of failure; shorting out. If within one year of purchase date take it to Apple, the cable also has a one year warranty, if short is do to manufacturing flaw and not abuse Apple will replace it free! Otherwise a new cable is around $30. You could also try a reset or restore, but don't think a glitch is your problem. If you do try to restore, just remember to make backup copies of all the info / data on this iPod to your computer first, then attempt to restore. Good luck. Cheers.

If I bought a game on my iPod that is also sold for the macbook do I still have to pay for it on the Mac?

If I bought a game on my iPod that is also sold for the macbook do I still have to pay for it on the Mac?

Yes. Because iOS and Mac OS X are two entirely different operating systems.

I restarted my mac and many apps and files disappeared. It's like it booted to a state several months ago. My CS 5 apps are not in the dock or applications folder. Has this ever happened before and what can I do?

It's like it booted to a state it was in several months ago. My CS 5 apps are not in the dock or applications folder. Has this ever happened before and what can I do?
The files on my desktop are not the ones that were there when I shut down. It's like it's gone back in time.
My display's power supply got fried (I think) in a power outage so I bought a new one. However, every time I restart the display usually stays black. I have found I need to keep rebooting until it kicks in and starts working. I unplug everything, wait a while (a few minutes to overnight) and try booting again.
This last time the display finally came on but I'm faced with this problem. I used to use time machine, but I deleted everything and disabled it a couple months ago or more so I'm at aloss as to why the mac is booting into the state it was in sevearl months ago.
What could I have done to cause this? Has this ever happened to anyone else and is there a solution?
Note: I did a search for a file I knew was created today. I found it and it showed that it was a file I had saved on the desktop this morning--even though that file's icon is not appearing on the desktop now.
I did a search for photoshop and saw my CS5 version listed.
However, I did a couple more searches and these files no longer appear in the search. I don't know if they're there or not. This is bizarre!
I'm on a Mac Pro, 10.6.2.

Thanks for the obvious question. I mean it. The very same thought came to me this morning and, sure enough, I had booted into another drive--my old one that, of course, had the old desktop, etc.
It didn't dawn on me that this was the case since I hadn't set it as a boot drive but I guess in the course of all the restarts I did, it got switched.
I'm back to normal again.

Has anyone experienced, if so found a solution to having electrical shock, tingling, pain and burning in fingers hand and wrist from using the apple mac computers??

Has anyone experienced electrical schock, tingling, burning and pain in the fingers, hand and wrist while using the apple mac desktop and the apple pro notebook?? If, so have you found a solution?? Never experienced this with any other computers and I have talked with my Doctor as well as a specialist and have had an EMG test for capatunel and nerve damage both test were negative

I have experienced some mild tingling if I touch the aluminum case on my iMac at the same time that I touch the metal cases on my external hard drives. They are all connected to the same surge suppressor and are on the same circuit, which is definitely properly grounded. I can't explain it, and I just make sure not to touch them at the same time.
I have never had any sensation touching just one of the devices alone. Is that what you are experiencing?

MY MAC wont start up. Realised that I am up for the 1TB seagate HDD replacement program. Has anyone experienced same issue and was addressed by replacing HDD?

Similar Messages

Maybe you are looking for