My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?
My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?
While we all have MacBooks in this forum most of us don’t use iCloud. There's an iCloud Support Community where everybody uses iCloud. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/icloud/icloud_on_my_mac
Similar Messages
-
Re: My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?
If you are trying to recover photo stream photos, they are only held in iCloud for 30 days. All you would be able ro recover is photo stream photos from the last 30 days.
If you have an iOS device that still has the photo stream photos one it, you can save them to the camera roll by opening the my photo stream album, tapping Edit, tap the photos, tap Share, tap Save to Camera Roll. Once in the camera roll, they can be imported to iPhoto on your Mac as explained here: http://support.apple.com/kb/HT4083. -
I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????
Prep your new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU and return to the installer. Install OS X. -
IPhoto events and pictures missing from iPhoto after restoring new hard drive and upgrade to iLife11
My iPhoto events and pictures are ALL missing from my iPhoto Library after I tried restoring my programs on a new hard drive AND upgrading to iLife11! Over the last few months, I upgraded my 2008 Macbook Pro's hard drive from a 250 GB to a 500 GB hard drive and since then have been manually installing and restoring programs and software. I decided to do things manually because I had problems with doing Time Machine backups/restores in the past, so before I upgraded the drive, I manually saved everything to a Western Digital MyStudio 1 TB hard drive that I had just for the purposes of a second back up. Anyway, I tried importing the pictures onto the new library, but couldn't find the hard copies at first, so that didn't work. I then tried deleting the iPhoto Library that came with new operating system, then copying my old backup onto the new hard drive...that didn't work either. However, when I right clicked on the iPhoto Library icon on my external hard drive (the original) and clicked on "show package contents," the folder not only contained the originals, but they were still organized by year and event just as I had them originally!
So, then I thought "why don't I try just importing the pictures directly into the new iPhoto Library!"
I tested it out, and sure enough, it worked! I then tried importing an entire folder (which, was actually the name of the event), and again it worked! So, I literally clicked and dragged my entire 2007-2009 library of pictures (which was about 35 GB) back into my iPhoto Library! AND, this only took about 30 minutes to download, enough time for me to write this post and the following instructions to Recap:
1. Open your new iPhoto Library
2. Go to wherever your ORIGINAL iPhoto Library is saved/backed up, then Right-click (or Control click) on the iPhoto icon
3. Click on "Show Package Contents"
4. Go to the folder called "Originals" or "Master"
5. Click and drag everything INSIDE the folder (not the folder itself) to your new iPhoto Library
6. DO NOT try Importing from inside iPhoto! For some reaseon, iPhoto can't see these images, but I promise, they're there!
I assume this could work on other iLife programs, but luckily I have MobileMe and my iCalendar updated itself, though I did have to do some tweeking...
Hope this helps other people out, GOOD LUCK!I'm re-posting the answer to this problem so I can show it has been answered:
Open your new iPhoto Library
Go to wherever your ORIGINAL iPhoto Library is saved/backed up, then Right-click (or Control click) on the iPhoto icon
Click on "Show Package Contents"
Go to the folder called "Originals" or "Master"
Click and drag everything INSIDE the folder (not the folder itself) to your new iPhoto Library
DO NOT try Importing from inside iPhoto! For some reason, iPhoto can't see these images, but I promise, they're there!
GOOD LUCK!!! -
Playlists Missing After Install New Hard Drive and Upgrade to Win 7
My computer needed a new hard drive and I upgraded from Win Vista Home Premium to Windows 7 Home Premium.
I am trying to get my Playlists back for my iTunes in my "Administrator" user account, after reinstalling iTunes and putting my music libraries back onto my computer.
(I had installed 32-bit Win7 OS myself, computer worked OK for about 1 day, then would not boot up; I took computer to shop, they said I needed new Hard Drive, and I gave them my new Win7 OS computer disks)
I am confused over whether I have 32-bit OS or 64-bit OS. They recommended installing 32-bit OS, I agreed, and believed that I had 32-bit OS installed; however, Computer / System Properties state "System type: 64-bit Operating System"
Prior to my installing Win7, I backed up the following onto my Western Digital "My Passport Essential Portable Hard Drive:"
("My Administrative Account"): Users / Owner / My Music
and
("My User Account"): Users / Yank / My Music
My "Administrative" and "User" user accounts contain different songs in iTunes.
If helpful, I could describe what is in each of these 2 backed-up music folders.
To get started, I copied both my "Owner" and "Yank" user folders in the C: User folder; however now I have "Owner," "Yank," and "Yank.Owner-Toshiba" folders in the C: User folder. I think I did this by creating a new Yank user account by creating a new account, not by my copying a folder into C: User folder. The Owner folder has a picture of a lock on the folder icon.
Because I had trouble merging My Music folders in the Owner folder, and I was confused, I copied everything that was in the Owner folder into a new folder in the Owner folder, "NEW OWNER FOLDER." I also copied my Owner Music folder into several places in my Users / Owner folder.
I also ended up changing the "iTunes Media folder location" several times, using iTunes "Edit / Preferences / Advanced tab / change "iTunes Media folder location". When I chose "Reset," it shows "C:\Users\Owner\NEW OWNER FOLDER\Music\iTunes\iTunes Media"
I've also played around with "Edit / Preferences / Advanced tab / 'Keep iTunes Media folder organized' "
When I open my iTunes, I have no playlists.
However, when I went to my "Yank" user account and opened iTunes for the first time, the playlists associated with that account were visible.
How do I get my playlists back on my Administrative Account, which is my main song collection and had many, many playlists?
Thank you.YAY!
I didn't try shift-start of iTunes, but I DID GET MY PLAYLISTS BACK BY FOLLOWING YOUR OTHER ADVICE:
I went to my external hard drive, went to my backup at Users / Owner / My Music / iTunes / and searched for library.itl
Four files with that name were found, with different dates.
I chose the most recent, dated just a few days before I made my backup to the external hard drive.
I copied it to my computer's hard drive into the following location:
C:\Users\Owner\NEW OWNER FOLDER\Music\iTunes
which overwrote the file which was located there.
When I opened iTunes, ALL MY WONDERFUL PLAYLISTS WERE THERE!
THANK YOU SO MUCH FOR SOLVING THIS FOR ME!
CAN YOU IMAGINE HOW DISAPPOINTED I FELT WHEN I BELIEVED THAT I HAD LOST ALL OF THE PLAYLISTS WHICH I HAD CREATED OVER THE YEARS? Many of my playlists were composed of whole albums whose songs I had added to iTunes.
THANK YOU AGAIN SO MUCH! -
Help with installing new hard drive and transferring data?
I have a MacBook Pro 13-inch mid 2009 that is running OS X version 10.6.8. The hard drive is full and I have a new one I'd like to install, but I am awfly intimidated. I'm hoping that someone could shed some light on kindergarten-style step-by-step instructions on how to make the switch. I'm mostly concerned about the data transfer part. I've found a handy video about physically installing the drive, so I think I'll be ok there.
Here are the items I have in preperation for the switch:
• 1.0 TB Hitachi Travelstar 7200RPM Hard Drive
• Portable bus-powered USB 3.0 storage solution (to turn my old hard drive into an external hard drive)
• Tools including a small phillips screwdriver and some Torx Screwdrivers
• Time Machine Extermal Hard Drive with all of my backups
Here are some things I have read that I find to be confusing
• Some suggest I should transfer my data from the old hard drive to new new one BEFORE I install the new one. (I'm not sure how that works.)
• Some suggest upgrading to the latest OS X before transferring any data. (Would that be Mavericks? I haven't upgraded to that yet. Is that necissary?)
• Some suggest that I will need the MacBook Pro's installation disk to make the switch. (I don't know where that disk is. Do I really need it?)
If anyone can clarify any of the above issues that I've listed as confusing, that would be great. Also, if anyone can help me figure out what steps to do first, second, third, etc., that would be great.
Thanks!Also,
Will I need the install disks for the Adobe Creative Suite and Microsoft office when I put in the new hard drive? -
I am in the process of replacing my hard drive and have run into a problem. I reinstalled OSX 10.6.3 using a DVD I bought off Amazon. That went well and I then restored my hard drive using an external and Time Machine.
After that, things still looked good but I couldn't log in to my user (and access my MacBook) because my password wasn't working even though my hint was correct. Yes, I am POSITIVE my password was correct; I even tried a couple other passwords to humor myself. I then gave up and decided to restart the computer.
Now my MacBook won't start up at all. It goes o a gray screen with a still loading symbol for a couple minutes and then goes to a solid light blue screen. I've tried starting up while holding command+R and I tied holding just command and neither worked.
Did I install the wrong OSX because I didn't use the same DVD that came with the laptop? Is there something wrong with my hard drive already?
Please help =[You probably bought the wrong RAM that has different pin assignments, so it won't fit in the slot. Return it.
I bought 4GB Memory online for my MacBook, so I could get it to run twice as fast.
Doubling the memory does not make your computer run twice as fast. -
We recently installed Window 8.1 and now our new music does not sync to our i-pod nano. Any ideas?
We have tried both a generation 5 Nano and new Nano.Hey Terrible Teddy,
Thanks for the question. I understand you are experiencing issues with the iTunes library on your PC. To begin, I see that you recently installed a new hard drive. Did you happen to copy over files from the previous hard drive? If not, I suspect that the iTunes library is no longer locally stored, and what you are seeing is your iTunes in the Cloud purchases.
Do the tracks have a download icon that looks like this?:
If so, you’ll want to download these purchases as they are not locally stored on your computer:
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT2519
After doing so, go ahead and attempt to sync your iPod once more.
Additional Information:
iTunes 11 for Windows: Symbols used in iTunes
http://support.apple.com/kb/PH12306
iTunes 11 for Windows: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH12491
Thanks,
Matt M. -
Even with a new hard drive and fresh install, it won't boot
Here's my story. On Wednesday last week, we had a power outage. (Yes, I had a surge protector. It didn't matter.) The next morning, when I turned my iMac on, it wouldn't boot. It got to the startup icon, but it just spun forever. I restarted and ran fsck, and it gave me a bunch of invalid sibling link errors. I used my Mac Mini to look at the hard drive in Target Disk mode and got the same result. I also tried using Disk Warrior, which hung a couple times before rebuilding the directory, but that didn't help. I took the iMac into the Apple Store, where a Genius checked it out, reset the PRAM, and then got a kernel panic. He told me I'd have to "erase and install," which I did (I had most of my important stuff backed up, but still lost some data, unfortunately.) I rebooted with the Apple install CD and reinstalled the OS. Then I rebooted into the clean install. The machine was extremely slow and took forever to get to the desktop. Then it hung with the spinning beach ball when I tried opening the Applications folder. A couple more pokes around the desktop eventually produced another kernel panic.
Yesterday, we got the hard drive replaced. I just finished reinstallation the OS, and guess what? It still won't boot. I get the Apple icon after the start up chime, then we get a blue screen that's quickly replaced with a gray screen. Then a black screen, then a gray screen again. This repeats forever with an occasional spinning beach ball until I restart.
I should note that I can boot into single-user mode and run fsck, and it reports no problems. I'm running DiskWarrior now for lack of any other ideas, and while it booted into the CD, it took forever to do so. I'm completely out of ideas, so other than throwing this machine in the trash and buying a new one, is there anything else I can try to diagnose the problem? Please note I was able to boot into a CD and reinstall the OS twice so far, so it still seems to be functioning to some extent.
Any ideas?Did you format the new drive, if not it has to be formatted to Mac OS Extended (Journaled) before the OS can be installed. Here is a simple how-to guide:
http://howto.wired.com/wiki/Format_Your_Mac_Hard_Drive -
how do i get the ios 10.9 so i can put it back on the new hard drive
If the Mac mini shipped with 10.6.8 or earlier, install Mac OS X 10.6, update it to 10.6.8, open the Mac App Store, and download 10.9.
If the Mac mini shipped with 10.7 or newer, connect it to the Internet, restart it with the Command and R keys held down, and install an OS. If this isn't 10.9, open the Mac App Store and download it from there.
(98457) -
I have a problem with my motherboard and my battery of my 2010 macbook pro 13". It was just serviced with a new screen, keyboard, and logic board. How much will a new battery and motherboard cost and would it be worth it or should I just get a new computer. It was about 300 dollars to get it serviced last week. if it adds up to much past 600 dollars I will just get a new one. THANKS FOR ANY HELP!
P.S During classes today it began beeping in my bag. Like three kind of long steady beeps then a short pause, and when I opened it I couldn't see anything but it was on so I turned it off and back on.Depends on what options your Apple store offers - if they can do a depot repair (where they send it out), that's around $300 for all parts & labor.
If the store doesn't have that option, a logicboard is around $600, battery $80-$100, from what I've seen.
If they JUST replaced the logicboard, you absolutely should NOT have to pay for another replacement - the replacement is covered by a warranty. If they want you to pay for it, make sure you have a copy of the receipt for the work that was recently completed so you can show it to them. They have no reason to charge you for another logicboard.
~Lyssa -
Please help me! My MacBook was stolen along with an external hard drive that had all my photos of my children on them. I hadn't backed to iCloud or backed anywhere else. I am distraught. No find my mac either...help...please... Some programmes are still running like drop of and Skype... Is it all over?!?
Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think? -
I've got a late 2009 mac mini with a 320gb hard drive and I want to upgrade it to a 1tb drive or bigger. What HDDs are compatible with my mini?
Because of the price I'm not interested in solid state drives, unless of course you want to send me $1,000.
I've already got external drives but I take my mini back and forth to work and don't want to carry those drives with me.
I'm not interested in buying a laptop. My mini works great so why waste $1,000 or more when I can buy a 1 to 3 TB hdd for under $300 and have exactly what I want. My late 2009 Mac Mini with a large hdd.
I went to Crucial's website and they can't tell me what drives fit my Mac Mini. That's where I got my ram (8GB). I'm ONLY interested in name brand quality HDDs.The limiting factor in your 2009 mini is the max 9.5mm drive thickness.
One of the largest capacity 2.5" drives that meets this criteria is the HGST (formerly Hitachi) at 1.5GB
Any reputable SATA HDD you can find that is not thicker then this 9.5mm will work. -
I have a problem with the pop-up prompt to enter my serial number for installation, it won't pop up when I entered the redemption code. Can someone help?
There is no pop up. There is a window that is part of the installation process. If you entered a wrong number, like a redemption code, you would have wound up installing it as a trial. In that case, go to the Help menu in the editor and look for an option there.
If that isn't what you're talking about, you really need to explain in more detail. -
I just bought apple tv. I have an ipad mini with ios 6.1.3. I want to do the mirroring but the airplay doesn't seem to be on my ipad. Can someone help?
Yes they are both connected to the same wifi network. Do you know when you double click on the home button and swipe right? The airplay button isn't there beside the play/pause and forward and backward button. It should be there.
Maybe you are looking for
-
Why do i get a forbidden 403 error message on a site i have had no trouble with before?
I go to a particular music site sometimes via a bookmark in firefox. all of a sudden I am getting message saying forbidden 403 and that I cant access it anymore from this server. what is going on? is there a solution? what may have caused it?
-
How to get Composite video output with Lightning devices?
I am replacing my last 30-pin device this week, and now all of our devices are Lightning cords. I have the Apple Composite AV cables in my vehicles, but Apple does not offer a Lightning version of them. From what I read on the 30-pin to Lightning a
-
Can't open new tab by clicking + button or from File
I am unable to open new tab by clicking the + box or even from File - New Tab. It has been working perfectly but failed since last week. I have tried to uninstall and reinstall the program but the trouble seems remaining unchanged.Is my Firefox affec
-
Hi There, We need to park documents with Spl GL indicators. In particular example: Downpayments received from customers. However, system does not allow parking with Spl GL. Has anyone found any solution to this? Any user exit or any other option? Tha
-
i have 2 parameters (x,y) on the screen. my demmand is :when i put values in x,and livving the paramter with "click" or "tab" (not enter) i will have new value in y. example : x---5 y--empty click on y--- i get new value like 3.