My Macbook Air 2010 on OSX 10.9.5 won't show Airplay tab

I'm trying to connect my 2010 Macbook Air to my Apple TV (on the same WIFI network) and the icon won't show up.
I have updated both the apple tv software and my computer software and restarted both..
I have been to my system preferences->Display-> checked the "show mirroring options" box.....but no apple tv option ever appears.
Can anyone offer any suggestions?
Thanks for your advice!

Welcome to the Apple Community.
AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). You can see which Mac you have and which operating system you are using by selecting 'About this Mac' from the Apple menu in the top left corner of your Mac and selecting the 'More Info' button.

Similar Messages

  • Macbook Air (2010), Bluetooth 4.0?

    I have a Macbook Air (2010) and upgraded to Lion OSX. I was checking my Bluetooth version and it lists it as 4.0 - more specifically: 4.0.1f4
    Is this possible that my Macbook Air Second edition got an upgraded Bluetooth in the Lion Operating system?
    Is this the same Bluetooth 4.0 as the iPhone 4s?
    So many questions Appreciate any respeonses to the above!
    Thanks!

    That refers to the software release version.  Everyone has the same software version under Lion.
    Bluetooth 4 hardware was added beginning with the Mid 2011 model. 
    Regards,
    Captfred

  • Do all your cases and screen covers for MacBook air 2010-2011 fit the 2012 model

    Do all your cases and screen covers for MacBook air 2010-2011 fit the 2012 model

    Upon receiving my 2012 MBA, I removed the inCase hard shell from my 2011 model and fitted it to my 2012 unit. The fit is identical. Dimensionally they are the same.
    So, if you are asking do all of mine fit? Yes they do.

  • MacBook Air 2010 Very Slow (even after clean reinstall)

    Hi,
    Problem
    The performance of my Macbook Air 2010 has slowed to the point where I can hardly complete basic tasks. For comparison, I use a MacBook Air 2013 at work and do not experience the same performance issues, so I believe my expectations are not unreasonably high.
    My Question
    Can you please advise on what I can do to troubleshoot? I've tried the solutions listed below, all of which have failed.
    I'm grateful for any help you can offer.
    Problem Description
    Switching contexts or tabs, operating within applications (such as Chrome, small Excel spreadsheets, navigating files), and browsing the Internet has become a slow, laggy and crash-filled experience.
    When right-clicking an icon and selecting 'Open With', Finder frequently times out or requires time to populate a list of applications.
    Machine is slow to the point where, unless a solution presents itself, I'll have to get a new MacBook Air.
    What I've Tried
    'Religiously' close all applications after use; extremely conscientious of number of applications running and their resource requirements.
    Clean reinstall of OS X.
    Storing all media on external hard drive to create more storage space.
    Clearing cache for all browsers regularly
    Always running machine on battery power
    Regular reboots
    Machine Specs:
    MacBook Air 13-inch, Late 2010
    OS X Yosemite Version 10.10.2
    Processor: 2.13 GHz Intel Core 2 Duo
    Memory: 4GB 1067 MHz DDR3
    Graphics: NVIDIA GeForce 320M 256 MB
    Storage: 87GB free of 250GB

    Thanks, dominic23.
    Unfortunately, it did not work.
    -Tried starting in safe mode, resetting SMC, and repairing disk. Resetting the SMC helped upon reboot, but performance degraded swiftly and back at a low within 30-minutes.
    Here is the full EtreCheck report:
    EtreCheck version: 2.1.8 (121)
    Report generated February 23, 2015 at 12:24:01 AM EST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Air (13-inch, Late 2010) (Technical Specifications)
        MacBook Air - model: MacBookAir3,2
        1 2.13 GHz Intel Core 2 Duo CPU: 2-core
        4 GB RAM Not upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1067 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en0: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 336
    Video Information: ℹ️
        NVIDIA GeForce 320M - VRAM: 256 MB
            Color LCD 1440 x 900
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 2 days 2:11:3
    Disk Information: ℹ️
        APPLE SSD TS256C disk0 : (251 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Untitled (disk0s2) / : 250.14 GB (82.89 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
        Apple Inc. FaceTime Camera (Built-in)
        Apple Internal Memory Card Reader
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
    Gatekeeper: ℹ️
        Anywhere
    Kernel Extensions: ℹ️
            /Applications/Karabiner.app
        [loaded]    org.pqrs.driver.Karabiner (10.6.0 - SDK 10.10) [Click for support]
            /Applications/Seil.app
        [loaded]    org.pqrs.driver.Seil (11.0.0 - SDK 10.9) [Click for support]
            /Library/Application Support/VirtualBox
        [loaded]    org.virtualbox.kext.VBoxDrv (4.3.22) [Click for support]
        [loaded]    org.virtualbox.kext.VBoxNetAdp (4.3.22) [Click for support]
        [loaded]    org.virtualbox.kext.VBoxNetFlt (4.3.22) [Click for support]
        [loaded]    org.virtualbox.kext.VBoxUSB (4.3.22) [Click for support]
    Problem System Launch Agents: ℹ️
        [killed]    com.apple.CallHistoryPluginHelper.plist
        [killed]    com.apple.CallHistorySyncHelper.plist
        [killed]    com.apple.coreservices.appleid.authentication.plist
        [killed]    com.apple.telephonyutilities.callservicesd.plist
        4 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
        [killed]    com.apple.awdd.plist
        [killed]    com.apple.ctkd.plist
        [killed]    com.apple.emond.aslmanager.plist
        [killed]    com.apple.icloud.findmydeviced.plist
        [killed]    com.apple.nehelper.plist
        [killed]    com.apple.periodic-daily.plist
        [killed]    com.apple.softwareupdate_download_service.plist
        [killed]    com.apple.wdhelper.plist
        8 processes killed due to memory pressure
    Launch Agents: ℹ️
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [loaded]    org.gpgtools.gpgmail.enable-bundles.plist [Click for support]
        [loaded]    org.gpgtools.gpgmail.patch-uuid-user.plist [Click for support]
        [running]    org.gpgtools.gpgmail.updater.plist [Click for support]
        [loaded]    org.gpgtools.Libmacgpg.xpc.plist [Click for support]
        [loaded]    org.gpgtools.macgpg2.fix.plist [Click for support]
        [running]    org.gpgtools.macgpg2.shutdown-gpg-agent.plist [Click for support]
        [running]    org.gpgtools.macgpg2.updater.plist [Click for support]
        [loaded]    org.macosforge.xquartz.startx.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    net.sourceforge.MonolingualHelper.plist [Click for support]
        [loaded]    org.gpgtools.gpgmail.patch-uuid.plist [Click for support]
        [loaded]    org.macosforge.xquartz.privileged_startx.plist [Click for support]
        [not loaded]    org.virtualbox.startup.plist [Click for support]
        [loaded]    org.wireshark.ChmodBPF.plist [Click for support]
    User Launch Agents: ℹ️
        [running]    com.spotify.webhelper.plist [Click for support]
        [not loaded]    org.virtualbox.[redacted]oxwebsrv.plist [Click for support]
    User Login Items: ℹ️
        Alfred 2    Application Hidden (/opt/homebrew-cask/Caskroom/alfred/2.5.1_308/Alfred 2.app)
        Seil    Application Hidden (/Applications/Seil.app)
        Karabiner    Application Hidden (/Applications/Karabiner.app)
        DoublePane    Application Hidden (/Users/[redacted]/Applications/DoublePane.app)
        HazelHelper    Application Hidden (/Users/[redacted]/Library/PreferencePanes/Hazel.prefPane/Contents/MacOS/HazelH elper.app)
        Keyboard Maestro Engine    Application  (/opt/homebrew-cask/Caskroom/keyboard-maestro/latest/Keyboard Maestro.app/Contents/Resources/Keyboard Maestro Engine.app)
        Flickr Uploadr    Application  (/Applications/Flickr Uploadr.app)
    Internet Plug-ins: ℹ️
        googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
        o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
    User internet Plug-ins: ℹ️
        Picasa: Version: 1.0 - SDK 10.6 [Click for support]
        Dashlane: Version: Dashlane 1.0.0 - SDK 10.10 [Click for support]
    3rd Party Preference Panes: ℹ️
        GPGPreferences  [Click for support]
        Hazel  [Click for support]
        Java  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
            10%    WindowServer
             8%    mds
             7%    Alfred 2
             6%    mds_stores
             6%    Finder
    Top Processes by Memory: ℹ️
        185 MB    Google Chrome
        166 MB    Google Chrome Helper
        96 MB    Finder
        82 MB    Messages
        47 MB    WindowServer
    Virtual Memory Information: ℹ️
        35 MB    Free RAM
        1.32 GB    Active RAM
        1.30 GB    Inactive RAM
        963 MB    Wired RAM
        42.77 GB    Page-ins
        1.12 GB    Page-outs
    Diagnostics Information: ℹ️
        Feb 22, 2015, 11:44:56 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-02-22-234456_[reda cted].crash
        Feb 22, 2015, 05:28:10 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-02-22-052810_[reda cted].crash
        Feb 20, 2015, 11:49:00 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/CalendarAgent_2015-02-20-23490 0_[redacted].crash
        Feb 20, 2015, 11:26:45 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/soagent_2015-02-20-232645_[red acted].crash
        Feb 20, 2015, 10:12:01 PM    Self test - passed

  • Macbook Air with no OSX (Mid 2011) ... cannot install Lion nor Snow Leopard

    I have a Macbook Air with no OSX (Mid 2011) ... and I cannot install Lion nor Snow Leopard.
    I purchased this Macbook Air 13" and found that the OS had been wiped off. Since then I've been able to get the Recovery Disk Assistant to get me into the Recovery Partition on the MBA... but when I try the "Reinstall Mac OS X" from within Mac OS X Utilities, the download fails after 30 sec. and I get the error message, "Could not find installation information for this machine. Contact Apple Care". This MBA is still covered under Apple's Applecare, but the nearest Apple Store is 3 hrs away and from what I've read, they may not be able to help me.
    I know all about Build 11A2063 but cannot figure out where or how to get that.
    Also, I've tried making a bootable Lion Drive from my Mac Mini onto a flashdrive, but this too did not work on the MBA (I assume because it isn't Build 11A2063). 
    I have a huge expensive paper weight with no idea of where to go from here. Any help would be much appreciated.

    Where did you buy an MBA without an operating system?  Was this from another individual who took the liberty to remove the Mac OS X before selling it to you?
    You might try calling Apple customer support and have them walk you through the process, as they can figure out just what version of the OS should be on that machine.
    http://www.apple.com/contact

  • I have a MacBook Air 2010 I want to reset but don't have USB how can I do this

    I Just purchased a MacBook Air 2010 but it did not come with USB drive to reset it can I do it without or where can I get one? It has10.6.8 on it Mac OS X it has old owners stuff on it.

    From what little you say, it sounds like the computer's hard drive was partitioned as Master Boot Record and then formatted FAT or NTSF. You'll need to run Disk Utility and delete the partition and then click on the Option's button and select GUID. Then you'll be able to format the drive as HFS+ to install OS X.

  • My macbook air 2010 will not power on, the charger light does not come on at all either. help!

    my macbook air 2010 will not power on, the charger light does not come on at all either. help!

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.
    Best.

  • Wipe macbook air 2010 to sell.

    I am selling my daughter's MacBook Air 2010 and need to wipe it clean, de-identify it, or whatever needs to be done.  I have another MS Office license I can reload on it afterwards, but I no longer have the any of the start up software/usb/manual etc.  How do I do this, and will the operating system be lost?

    Before you sell or give away your computer, in addition to the steps mentioned in this support article, take these steps:
    1. Run Apple Diagnostics or the Apple Hardware Test. The buyer will do this (or he should), and you don't want to be surprised by the results.
    2. Reset the PRAM and the SMC, which might contain personal information.
    3. If you set a firmware password, remove it by running Firmware Password Utility in Recovery mode.
    4. If you activated FileVault in OS X 10.7 or later, turn it off.
    5. If you use Boot Camp, the partition must be deleted.
    6. If you created any other data partitions on the internal drive, remove them in Disk Utility.
    7. If the machine has an internal hard drive, erase the one remaining data partition with the option to zero out data. An SSD doesn't need to be zeroed.
    You can't legally or practically transfer any software downloaded from the Mac App Store to the new owner of the machine, even if it was free. That includes OS X, so if you upgraded to OS X 10.7 or later, you must reinstall an older OS, either from the installation media, if applicable, or by starting up in Internet Recovery mode (option-command-R at the startup chime.) If you installed from physical media, deliver those to the new owner.
    If you're selling the machine, or donating it in working order, and it originally shipped with OS X 10.4 or 10.5, then you have the option of installing either from the discs that came with it or from a retail Snow Leopard disc (which you must then transfer to the buyer.) The buyer should understand that if he doesn't get the original discs from you, he won't get the bundled iLife applications or the Apple Hardware Test. Replacements for the original discs can be ordered from Apple.
    The new owner will have to redownload any software that came from the App Store, including OS X upgrades, under his or her Apple ID. If you ever updated the bundled iLife applications (Garage Band, iMovie, and iPhoto) through the App Store, you can't transfer those either. The buyer will have to purchase them.
    Remove the machine from your list of registered products. If it's still covered by an AppleCare Protection Plan, transfer the coverage to the new owner by following the instructions in the AppleCare Terms and Conditions (under the heading "Transfer of Plan.")

  • I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

    i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

    Well I'll guess you're using iPhoto 11:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • MacBook Air intermittently has issues connecting to websites when wireless shows connected to the internet. The pages show that I am offline, but I can ping Google DNS. Windows PC, iPhone and Android phone have no issue displaying the same web pages.

    MacBook Air intermittently has issues connecting to websites when wireless shows connected to the internet. The pages show that I am offline, but I can ping Google DNS. Windows PC, iPhone and Android phone have no issue displaying the same web pages.How do I solve this issue?

    Go step by step and test.
    1. Power off the router. Unplug it from the wall. Wait a while.
        Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
        Restart the computer.
        Start up in Safe Mode.
        http://support.apple.com/kb/PH14204
    2. Empty Caches
        Safari > Preference > Advanced
        Checkmark the box for "Show Develop menu in menu bar".
        Develop menu will appear in the Safari menu bar.
        Click Develop and select "Empty Caches" from the dropdown.
    3. Deselect Proxies if selected.
        System Preference > Network > Advanced  > Proxies Tab
        Under "Select Protocol", uncheck any box if selected.
        Click "OK" then  "Apply”.

  • HT5219 my thunderbolt shows the sleep screen instead of the MacBook Air screen How can I get my screen to show up on the Thunderbolt?

    I cannot see my MacBook Air screen on the Thunderbolt display. All it shows is a screen saver. How can I get simultaneous screens to show on the Thunderbolt?

    I think changing the symbols from movieclips to graphics helped, thank you.

  • I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac.

    I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac. My Macbook Pro and the two different iMacs I tried it on were all using Mountain Lion, so the only difference was the iMac versus Macbook Pro.

    I just tried this, no luck...
    I connected a different USB cable, still the same problem. Tried both cables with the problematic hard drive on two different computers, still the same problem.
    At this point I assume I'll probably need professional help in saving the files, thanks for the assistance.

  • How do I pair my macbook air 2010 with apple tv 2

    -

    Sorry, that is not possible.
    As you can see here, that MacBook Air is too old to use AirPlay Mirroring:
    About AirPlay Mirroring in OS X - Apple Support
    You also cannot use an HDMI cable to "pair" your MacBook Air.  The reason is your model has a mini-display port (that looks like a Thunderbolt port, but is not).  Therefore, it cannot send audio to the Apple TV.
    MacBook Air (11-inch, Late 2010) - Technical Specifications

  • MacBook Air mid-2013 OSX 10.9.1 cannot connect to DVI Monitor

    Does anyone else have this problem?  I've seen similar issues raised, but so far can't find a solution to my particular issue:
    MacBook Air Mid 2013 (ordered Jan 2014)
    - 1.3GHz Intel Core i5
    - 8GB 1600MHz DDR3 RAM
    - OSX 10.9.1 Mavericks.
    When I connect my MacBook Air to any monitor (well, I've tried three monitors: Benq, NEC and Samsung) the monitor will not detect an attached computer. The MacBook also does not think it's connected to an external display.
    If I connect via VGA cable, it works fine most of the time*, so the display port seems to work only for VGA and not DVI.
    I am using mini display port adapters (DVI and VGA) purchased from the Apple Store.
    The adapter for the mini display to DVI works fine, since I can get my 2009 MacBook unibody to connect to an external display via DVI without issue. So it's not the adapter, or the DVI cable.
    I have tried resetting the System Management Controller for my MacBook air but it does not work.  No matter how many times I reset the computer (Hard reset, Soft power down, SMC reset) I cannot get it to connect via DVI.
    Has anyone experienced this issue, or seen a resolution for it?
    *The only other symptom I get periodically, is that after being disconnected from a VGA monitor, the computer will periodically (about 2/5 times) not connect to the VGA monitor either without a reboot.   However it will connect most of the time, and ALL of the time after a reboot.
    Thank you

    Thanks themachead: I have tried the adaptors on different macs, as I indicated in my post.  The adaptor works fine with a different mac
    Yes, I have also tried starting up with the monitor connected, and disconnected.
    I just got off the phone with Apple Care. They couldn't solve my issue through normal means, but during one attempt, we closed my MacBook Air while it was connected to the external display, with my Magic Mouse and Apple Keyboard connected via Bluetooth.  The external monitor did not come on.  However when I opened my Macbook Air's screen, we saw that my Mac had crashed and prompted me to reboot. When it did, the external monitor worked.  I have been able to disconnect and reconnect the monitor and it seems to be working now.   I will see what happens after a few attempts.

  • Advice: How to speed up Macbook Air (2010)

    Under Lion my 2010 (HDD) Macbook Air has been intolerably slow. It could take 10 minutes to start a program. When connecting to a projector, it could likewise take 10 minutes for it to resize windows during which it was unresponsive. I have been about to hurl it in the trashcan because this computer was just such an impediment to my work. But now I found the solution: don't run Safari. I had long suspected 2G ram combined with a slow HDD was the culprit. I tried to minimize the number of programs open, but let Safari run permanently. But it turns out Safari uses enormeous amounts of memory, and it has a tendency to just grow and grow its memory grab. Now, I quit Safari when I want to run other programs, and after this the computer is merely slow, not intollerably so. It is annoying to always have to quit Safari, but at least it makes the computer useful.
    Any better suggestions than always quitting Safari?

    The fact is that Mac OS X is good at of taking care of itself, if there are performance issues, there are a couple of things you can check:
    Check your Login Items under System Preferences > Accounts to see what you have automatically launching.Also check /Library/LaunchAgents/ and /Users/yourusername/Library/LaunchAgents/ for items launching at startup
    Launch Activity Monitor and change "My Processes" at the top to "All Processes". Then see what may be consuming your OS X system resources.
    Check the System Memory tab at the bottom of Activity Monitor to see if you have excessive "page outs", a sign that you may benefit from more RAM.
    Check if you are running any poor Mac anti-virus programs as they may take large resources.
    If you don't want to do these manually or the above checks still won't help, let the MacBook speed up tool http://www.speedupmacbook.com/ perform a health check of your Mac and fix relevant issues.
    Best regards!

Maybe you are looking for

  • Ipod nano 5th generation not recognized by itunes

    I just got a new iPod nano and when I connect it, nothing happens. Itdoes not appear in the device list in iTunes. The nano screen says it is connected but I didn't get to even set it up in itunes. I've tried everything on the apple site - uninstalle

  • How to switch off the pop-up message in rspcm

    Hi there, Does anyone know how to switch off the pop-up message in rspcm? The monitoring user shouldn't get the pop-up below anymore: „Statusänderung des Requests – Sollen Folge-Events ausgelöst werden?“ The pop-up in english might be “status change

  • Reg:working with multiple windows in webdynpro-abap

    Hi , How can we create multiple windows and how can we link them... suppose we have 3 fields on first screen .how to move the data from the first screen to second screen.. Thanks & Regards Suman Puthadi

  • Web Dynpro UI for HAP_DOCUMENT BSP

    Hi Can anyone let me know if there is a Web Dynpro UI for the HAP_DOCUMENT BSP? I've seen some other posts in this regard but none have any specific answers. I would also like to know the best approach to take to develop a new UI for this BSP? Regard

  • Condition check befor exporting records

    Can we put any condition before the records get exported. I.e as the records reach syndication manager for syndication i want a condition to be executed and then based on the result of condition i want syndication map to be selected Ex:- if acount gr