My macbook air 2010 will not power on, the charger light does not come on at all either. help!

my macbook air 2010 will not power on, the charger light does not come on at all either. help!

Reset SMC.     http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best.

Similar Messages

  • HT1459 Just bought a new ipod shuffle for my kid and cannot set it up because it does not show up in itunes. Also the charging light does not light up. what could be wrong, as i am able to see both my iphone and ipad on itunes on the same pc?

    Just bought a new 4th gen iPod Shuffle for my kid. Problem is I cannot do the initial set up, as the device does not show up on iTunes on my PC. Also the charging does not light up. Any ideas on what could be wrong, as I am able to see both my iphone and iPad on iTunes using the same PC?

    I also tried manually underlining a few things on the new iPad and when highlighting a paragraph, it would skip a few lines and the line would go through a few as well. Looks like a major iBooks glitch needs to be addressed here.

  • [svn:fx-trunk] 11541: Fix the textLayout build number that is set in the main build. xml to match what will be set when the build machine does NOT do the build

    Revision: 11541
    Author:   [email protected]
    Date:     2009-11-06 14:29:41 -0800 (Fri, 06 Nov 2009)
    Log Message:
    Fix the textLayout build number that is set in the main build.xml to match what will be set when the build machine does NOT do the build
    QE notes: no
    Doc notes: no
    Bugs: no
    Reviewer:
    Tests run: checkintests
    Is noteworthy for integration: no
    Modified Paths:
        flex/sdk/trunk/frameworks/air-config.xml
        flex/sdk/trunk/frameworks/flex-config.xml

    Thats good news.

  • Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work.

    Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..

    I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand

  • My macbook black shutdown during a thunder storm , what do i need to? it won't turn on and the charger light is not on green or on at all..have i fried it?

    my macbook black shutdown during a thunder storm , what do i need to? it won't turn on and the charger light is not on green or on at all..have i fried it?please help a.s.a.p...

    Most likely.
    You can try to boot from the Install DVD for your Mac and run AHT from there if it boots.
    If not it sounds like it is time to take it to Apple for repair.
    Allan

  • My back button does not work because the prior screen does not appear in the history.  I therefore must go back to the blue screen and reload safari.  Apple tech support could not help.  Can anyone else help?

    After I installed mountain lion my back button frequently does not work because the prior screen does not appear iunder History.  Apple tech support was not able to fix the problem.  Does anyone have any suggestions?

    lbryan1987 wrote:
    I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
    You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
    there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
    Seriously? It's physically broken!

  • My back and forward buttons do not work also the refreash button does not work, I have reloaded the latest version of fire fox and that did not help. HELP please.

    My back and forward buttons do not work also the refresh button does not work, I have reloaded the latest version of fire fox and that did not help. All of navigation tool bar worked until I updated Fire Fox, now if I click on a link in yahoo, for instance, I can not get back to my yahoo home page without reloading Fire Fox. HELP please.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

  • 404 Not Found,   Error: The requested resource does not exist.

    Hi all,
    When I try to access VC with the http://localhost:50400/vc where 04 is the CE1 instance, it returns the following error:
    404 Not Found
      Error: The requested resource does not exist.
    Any clues. Just to add that the CE1 servers are running green and nwa is accessible on same url.
    Regards.

    Hi
    Try with following link (VC should be in Caps) -
    http://localhost:50400/VC/default.jsp
    Also check whether you have proper admin roles assigned to your user id.
    Regards
    Sandeep
    Edited by: Sandeep Patki on Sep 16, 2009 8:47 AM

  • TS3048 My wireless mouse has stopped working after I recharged the batteries,the green light does not come on. I swapped the batteries from the mouse to my wireless keyboard and they work fine in the keyboard.

    My wireless mouse has stopped working after I recharged the batteries,the green light does not come on. I swapped the batteries from the mouse to my wireless keyboard and they work fine in the keyboard.What can I do?

    Hello:
    Try resetting the SMC and PRAM.
    Barry

  • After updating to 4.4.2  the notification light does not change colors.  How do I fix this?

    After updating to 4.4.2 the notification light does not change colors.  It only blinks one color.  How do I fix it?

        Hello Saralynn43. Getting new updates is always fun, but then there are certain changes that can take some getting used to! This may be one of these cases where there may have been a change done to the notification system. What are the notifications that have been affected with the color change? Let us know as we'd like to look into this for you. Thank you.
    NicandroN_VZW
    Follow us on twitter @VZWSupport

  • When I enter time machine (on Time Capsule) i see the stack of screen shots and the time line. However, when I roll over the mouse pointer, the time line does not activate. The cancel button does not get me out of the app: have to alt cmd esc. Ideas?

    When I enter time machine (on Time Capsule) i see the stack of screen shots and the time line. However, when I roll over the mouse pointer, the time line does not activate. The cancel button does not get me out of the app: have to alt+cmd+esc. Ideas?

    I have never seen it but then I run SL which is much more reliable than Lion..
    See
    http://pondini.org/TM/E4.html
    Check the master guru of all TM problems.

  • I install 2 new batteries on 2 different Magic Mice, close the battery compartment securely but the indicator light does not even turn on.

    I install 2 new batteries on 2 different Magic Mice, close the battery compartment securely but the indicator light does not even turn on.

    If these are older mice, the battery compartment may be soiled by leakage from the previous batteries.
    Remove the new batteries, thoroughly clean the terminal points inside the compartment, wipe over the new batteries, reinsert ... and try again.   Note.   Use only good quality batteries, Eneloop, Energiser, Apple or Duracell.   Other batteries, particularly unbranded ones may be slightly too small in length.

  • MacBook Pro will not charge light does not go on

    McBookPro charging device does not charge. Magnetic connection appears to be loose.

    1. SMC reset
    Category: Hardware power related
    Instructions: https://support.apple.com/kb/HT3964
    Problems solved: Fans blowing with no activity, machine is not booting, power button pressed and nothing happens, problems with indicators, Magsafe has wrong lights, battery is not charging, monitor and graphics issues etc.  If the battery is not charged (from like letting it sleep too long), let the Mac charge up awhile first.
    Other related hardware problems:
    Magsafe issues: https://support.apple.com/kb/TS1713   https://support.apple.com/kb/TS4127
    Check battery status: Hold the option key down while clicking on the battery icon in the menu bar, top right corner.
    Magsafe: Use the correct/matching power supply charger with your Mac, not a less powered one from another Mac.
    Laptop won't power up  https://support.apple.com/kb/TS1365
    Computer won't power up  https://support.apple.com/kb/HT3964
    Troubleshooting the slot loading optical Superdrive:  https://support.apple.com/kb/HT2801
    Find the closest Apple repair or distributor:  https://support.apple.com/kb/HT1434
    This is the best I can do as it's a hardware problem, take the machine back if this doesn't work.

  • G62 - 143CL Laptop Charge light does not come on. Checked charger cord it is OK

    I know my battery is weak or possible shot. When I plug in the charger the indicator light does light-up. It was working OK when I shut it off last night.  I tested the charger and it is putting outa good charge.  the laptop won't start.

    Please try to Power ON the Notebook only with AC/Power Adapter without the Battery, If it does not work try to Power
    ON the Notebook with a spare/known good AC/Power Adapter and Battery individually one at a time.. meanging Test your Notebook individually with AC/Power Adapter alone and Battery alone
    Let me know how it goes
    Regards,
    K N R K
    I work on behalf of HP

  • I have updated my macbook air to OS X Yosemite. Now my computer does not connect with my HP printer 1300. What do I need to do to resolve this problem?

    Hello,
    I have recently updated my mac book air to OS X Yosemite. Now my mac book air does not connect with my HP Laserjet 1300 printer. Can you please tell me what to do to solve this problem?
    Thank you very much.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful.

Maybe you are looking for