My macbook air doesn't respond after it sleeps automatically?

Basically, I set my macbook air to autosleep after one minute, but after autosleeping, I tried touching the trackpad and pressed the shut down button and nearly every button to open it but nothing worked. I ended up having to switch it off and restart it. Is there something wrong? :/

There's also a Facebook group which puts this issue in a more open public forum.
As stated quite a few times in the various forum discussions, Apple do not pay attention to what's going on here, so come and join us on Facebook as they can't ignore that :-)
https://www.facebook.com/groups/326421004166133/

Similar Messages

  • My macbook air doesn't start after being for 2 months off, My macbook air doesn't start after being for 2 months oof

    My macbook air doesn't start after being for 2 months off? What can i do?

    Plug it in and leave it on the charger for about 5 minutes then try to turn it on. If that doesnt work, contact apple and have it sent out for repair or take it to your local apple store. they will probably cover it for free if no physical damage has been done.

  • My new Macbook Air is now restarting after leaving sleep after upgrading to OSX 10.9.2.

    Did work fine before upgrading.

    Step 1
    Take all the applicable steps in this support article. That's the starting point for any further efforts to solve the problem.
    Step 2
    If you're running OS X 10.8.5 or earlier, from the menu bar select
     ▹ System Preferences... ▹ Accessibility
    If the checkbox at the bottom marked
    Enable access for assistive devices
    is checked, uncheck it and test.
    If you're running OS X 10.9 or later, select
     ▹ System Preferences... ▹ Security & Privacy ▹ Privacy ▹ Accessibility
    If any applications are listed on the right and have a checked box next to them, uncheck all the boxes and test. You may first have to click the padlock icon in the lower left corner of the window and authenticate as an administrator to unlock the settings.
    Step 3
    Disconnect all wired peripherals except those needed to boot, if any. Be sure to disconnect all USB hubs. If you use a keyboard or mouse plugged into a hub, plug the devices directly into a built-in USB port and remove the hub. Test.
    Step 4
    If you have more than one user account, you must be logged in as an administrator for this step.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    In the Console window, look under the heading DIAGNOSTIC AND USAGE INFORMATION on the left for Diagnostic and Usage Messages. If you don't see that heading, select
    View ▹ Show Log List
    from the menu bar. In the search box in the window's toolbar, enter "powerd" (without the quotes.) Select the last few messages that appear, if any, and copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).

  • After upgrade to yosemite my macbook air doesn't connect to iPhone 4s(version8.1).

    after upgrade to yosemite my macbook air doesn't connect to iPhone 4s(version8.1) .it did connect once and thats it...theywork now as two different mac products as before upgrade. that advantage of connecting the mac products after upgrading to yosemite has not worked.

    Hi netaanya,
    Welcome to the Apple Support Communities!
    Your iPhone 4s does work with Continuity, but only phone calls. Please refer to the attached article for more information.
    Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
    Handoff is supported by the following iOS devices and requires iOS 8. Instant Hotspot requires one of these iPhone or iPad devices with cellular connectivity and iOS 8.1. Instant Hotspot also requires Personal Hotspot service through your carrier.
    Phone 5 or later
    iPhone 4s (sharing iPhone calls only)
    iPad (4th generation), iPad Air, iPad Air 2
    iPad mini, iPad mini with Retina display, iPad mini 3
    iPod touch (5th generation)
    Cheers,
    Joe

  • MacBook Air doesn't see wifi if booted in a room where otherwise it has access

    If I start my MacBook Air in a room close to the router and then I bring it into another room, the wifi connection remains full bar. However if I restart it in that other room, it won't find my router again; if I display the list of routers found in the area, it won't display mine and so will not be able to connect.
    If it would loose connection walking into that other room, I would think this is a range issue, but I believe it's more like a combination of range and some op system or wifi card... whatever issue, not sure.
    Also I thought it was due to the recent Mountain Lion installation, but after reinstalling Lion, the issue still remains.
    I brought it to the official Apple service and they could not find anything. They guessed it must be an interference issue with the router (doubt it, it's on channel 12, not 6 or 11) or that the router doesn't allow more connections (no such settings, plus time to time it does connect while there are no less computers on the network).
    The internal network consists of a router with DD-WRT firmware, a Dell Laptop, an iMac and 2 iPhones, all connect perfectly.
    If you need any more detail, please let me know and thank you for your help in advance!

    I was looking for an explanation of this, but apparently the MacBook Air doesn't really communicate well with a router on channel 12. As soon as I switched to channel 10 (11 was way too crowded) my problems were gone.
    Apparently there might be a problem with the MacBook Air's AirPort Country Code, but I could not figure out how to check it on mine. If you are curious and want to use channel 12 or 13, check out this thread: https://discussions.apple.com/thread/3656144
    Hope this helps.

  • My MacBook Air doesn't shut down because safari doesn't quit

    Hello. 2 days ago My MacBook Air made an update. after that, yesterday night I was about to shut down my laptop. But it said that it cannot be closed because Safari is running. That's why I tried to quit Safari. But it doesn't quit. So İ cannot shut down my laptop. Help me.

    Welcome to Apple Support Communities
    Try to force quit the app. Press Alt, Command and Esc keys to open Force Quit, choose Safari and force quit it. Then, turn off the MacBook

  • Camera on my MacBook air doesn't work

    My camera on my MacBook air doesn't work.  doesn't work on skype or facetime

    See this thread:
    https://discussions.apple.com/thread/5306216?tstart=0
    FIX: 
    1. You need Time Machine
    2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
    3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
    4. Go to Time machine in date that skype work fine.
    5. Change AppleCamera.plugin with file from Time Machine
    6. Restart system, Now skype need to work with camera.
    From Apple:
    MacBook Air (Mid 2013): FaceTime HD Camera might not work after OS X 10.8.5 update

  • Mid 2009 MacBook Air - Most navigation freezes after reboot, fixed after hibernate

    On my Mid 2009 MacBook Air, at some point after upgrading to 10.8.2 (not sure if it is directly related), a strange behavior started:
    Boots up normally, but then most navigation is frozen. 
    Mouse cursor moves fine, but can't "click" anything. 
    Tab and Return keys work, which I can use w/ power button to select restart or shutdown.
    Other keys work, somehow got to spotlight window one time and was able to type search term and hit Return
    Dash menu won't slide up when I move cursor to bottom, as it normally does
    Every once in awhile everything works fine after a restart, maybe 1 out of 25 times
    Problem exists even in Safe Boot
    Temporary workaround:  I have noticed the problem is magically fixed after a hibernate, until the next shutdown.  So after restart I close my MacBook to force a hibernate, reopen once I see the white light flashing, and then everthing is fine.  So far this workaround consistently works.  I rarely shut down by MacBook under normal conditions so I'm certainly not dead in the water, but I would like to get this thing figured out if possible.
    Other data, and what I've tried so far:
    Searched to find others that might have had this problem and already determined a fix, didn't find any
    Logged in as different user (Guest), problem still existed
    Nuked all the apps that were automatically loading at startup, didn't help
    Tried Safe Boot, problem sitll existed
    Used Disk Utility to Verify Disk, no problems found
    Reloaded 10.8.2, didn't help
    Loaded 10.8.2 supplemental update, didn't help
    No new apps loaded within last few months
    Not running AV software
    Unfortunately I don't have Time Capsule set up
    I have about 300 lines from my System Log that captures a Restart after which the problem existed, immediately followed by a Hibernate after which the problem was fixed.  Would it be appropriate for me to paste it in here?  I'm not knowledgeable enough to troubleshoot through the System Log.
    Any help would be greatly appreciated!
    Thanks,
    Rob

    It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions. 
    How large is your hard drive and how much hard drive space do you have left? 

  • Macbook air doesn't connect to Sharp Notevision PG-B10S projector

    macbook air doesn't connect to Sharp Notevision PG-B10S projector with OS X, same as upgraded to Yosemite

    Hi There,
    Whenever I hook up a projector that doesn't work with my MacBook (when it shows just a blank, black screen), the first thing I try is going to System Preferences > Displays and setting the resolution of my desktop to 800x600.
    Nine times out of ten, the projector starts right up and works perfectly.

  • IMessage on MacBook Air isn't responding

    For two days now, my iMessage on my MacBook Air isn't responding. I keep trying to restart my laptop, and tried to shut down everything then start my laptop up again. I did log out of my iCloud account and log back in, and I did force quit the application as well but that didn't work either... Any suggestions?

    Check your settings in System Preferences > Trackpad then select the Point & Click tab.

  • I purchased a CS6 Design Standard disc and my MacBook Air doesn't have a disc drive. How do I download CS6 to my MacBook?

    I purchased a CS6 Design Standard disc and my MacBook Air doesn't have a disc drive. How do I download CS6 to my MacBook?

    Download the installer from Adobe Download CS6 products
    Install then enter your serial number.

  • My macbook air doesn't have phone under messages - not syncing

    my new macbook air doesn't seem to be syncing messages like my mini, ipad and macbook pro do.  I noticed under the Preferences, it has my two .me and .icloud email accounts, but doesn't have the phone number in there or any way to add it.
    on another note, it also won't let me connect by bluetooth to my iphone 5 (running IOS7 beta) to use my ATT hotspot - when the other's do... 
    it also wouldn't allow remote disk installation of my adobe products (when mini worked just fine over remote).
    Not sure if they are all related, but strange problems I'm having...

    HI,
    Are you talking about Messages > Preferences > Accounts ?
    You can add @me.com and @icloud.com IDS as valid AIM Screen Names.
    One can be used as the iMessages account.
    On the iPhone > Settings > Messages remove the Apple ID.
    Set Messages to Off.
    Wait a few minutes and then turn Messages back on again
    Add the Apple ID.
    Restart the Mac version of Messages.
    You should now get one or two pop ups saying the iPhone is using the Apple ID and the iPhone Number
    Accepting these adds the iPhone Number to the Receive At list of "Aliases" and the Send From (Start New Conversations from) drop down.
    9:44 pm      Wednesday; September 11, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • MacBook Air not turn on, after hard disk eject, without guarantee

    Hello i have two macbook air not turning on,
    after ejecting external hard disk, when macbook air is sleeping.
    External hardisk ( 2.5 sata) have one ending of USB Type mini-B
    and two endings of cable (one for data, other for power), of USB Type A
    After next sequence,
    -insert one tail of usb cable into macbook air, the second usb cable into 5v adapter (like iPhone usb adapter)
    -after some time macbook air going to sleep
    -without waking macbook air, pull out the cable what connected into macbook air
    MacBook Air will not turning on.
    even after this instructions
    http://support.apple.com/kb/ts1367
    In nearest AppleStore they say that there is a problem with logic part of notebook,
    And the minimal price of repair will be cost half price of macbook air.
    In other words, they say what they will not searching the problem of this,
    they only will replace mother board.
    Would you suggest other solutions ?
    May be somebody else have this problem ?

    OK. I wasn't quite sure. So, the first thing to try is Resetting your Mac's PRAM and NVRAM followed by Intel-based Macs: Resetting the System Management Controller (SMC). If neither can be effected then take it in for service as there has been a serious hardware failure.

  • I am having trouble with iMessages. I cannot connect iMessage from my iPhone to my macbook air. This happened after I changed my apple id and keychain password last night.

    I am having trouble with iMessages. I cannot connect iMessage from my iPhone to my macbook air. This happened after I changed my apple id and keychain password last night.

    Hi geraldinefromjersey city,
    I'm sorry to hear you are having issues with Messages. If you are having issues linking your Messages accounts between your iPhone and MacBook Air, you may find the information and troubleshooting steps outlined in the following articles helpful:
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support
    Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
    Regards,
    - Brenden

  • My FaceTime Camera of my MacBook Air doesn't work in Skype.

    My FaceTime Camera of my MacBook Air doesn't work in Skype. I try to make a videocall but my camera doesn't work.

    Be sure to check PHOTOBOOTH and FACETIME in more than one user account.  However, don't use the "Guest" account for testing.  If your Mac only has one account, create a new user account for testing.
    • If Apple's http://support.apple.com/kb/HT2090
       suggestions do not help you, (the "reset" suggested there
       often restores normal function,) continue with the following.
    • Use your Mac's Disk Utility to repair permissions and then
       download and apply the latest Combo Update, for your Mac OS,
       the current one is at: http://support.apple.com/kb/DL1484
    • Repair permissions again immediately following the system restart
       that completes the Combo update.
    Properly applying the Combo version of updates can sometimes correct software problems, but, if your trouble is caused by a hardware problem, there are no user serviceable parts of iSight.  For hardware help, contact an Apple-Authorized Service Provider for service.
    The same Troubleshooting help for built-in iSight works for FaceTime (and FaceTime HD) cameras, too.
    If your camera works with Apple apps in every user account you test, search or post for help in Skype's dedicated forum.  The Skype users who post there may have already know the solution for your particular problem.
    Message was edited by: EZ Jim
    Mac OSX 10.7.3

Maybe you are looking for

  • !! Warning on javax.security classes !!

    WARNING: be aware that weblogic.jar in WLS 6.1 contains at least one class from the javax.security package that has been customized by Bea and is significantly different (i.e. incompatible) from the class provided in the 'official' Sun J2EE library.

  • MaxOccurs="unbounded" is not working for NXSD files.

    Hi, I am using the below XSD structure to read fixed length files. The fixed length files can have mutliple occurrences of a bunch of lines. For e.g., 1 A 0010CTCTL 09834 1 A 0020A1TH1 09089 1 A 0030A2TH2 98765 1 A 0010CTCTL 1233 1 A 0020A1TH1 0908 1

  • Sender and receiver

    Dear forum, 1 sender and receiver only can happen in CO? why not in FI? 2 sender and receiver are referring to cost object? 3 when use secondary cost element, the sce must be linked to a sender and receiver only can work? Thanks alot

  • USER_TABLES view select problem

    i have created a new user and created a test table using USERS tablespace with unlimited quota, ive dont grant select on user_tables to username; i have created test table and selecting * from user_tables shows the table but selecting where returns n

  • Force Mac Mail File/Save As to use Raw Message Source

    Mac Mail version 6.3.  When using File/Save As, is there a way to force the save as format to be "Raw Message Source" always?  I change it to that, but over time it seems to switch back to Rich Text and I know I didn't change it.