My  macbook air got wet and now it doesn't have any sound

My macbook air just got a little wet but then air was coming out of it and now it works and i can use it but sound doesnt come out of it. Should i bring it in ? Is there anything that Apple can do to bring the sound back ?

Leave it turned off.  Leave it unplgeed from the wall.
Take it into Genius Bar for a repair estimate (estimates are free).  Water damage is not covered by warranty, so the repair bill may be small or may be large.  Genius Bar will know far beter than any users in this forum just guessing.
Good luck.

Similar Messages

  • My macbook air got wet and won't start up.  Is it toast?

    my macbook air got wet and won't start up.  Is it toast?

    most likely. take it to an Apple store or AASP for a correct diagnosis. Expect a large extimate.

  • My iPod touch screen got wet and now it won't register any touch.

    I had just gotten out of the ocean and when I went to check my texts, my hair dripped a bunch of water onto my iPod's screen. I wiped it off, but when I tried to scroll through my inbox it didn't register. I was able to get it to turn off, but it took a while to get it to register.

    Place the iPod in a sealed container of uncooked rice for five days or so to dry the iPod. Then try resetting and restoring the iPod.
    One concern is that even if it works for awhile the salt water may cause corrosion of interns and cause the iPod to not work later.

  • I got an 11 inch macbook air for christmas and now i am regretting not getting the 13 inch is there any way i can upgrade to the 13 inch still ?

    i got an 11 inch macbook air for christmas and now i am regretting not getting the 13 inch is there any way i can upgrade to the 13 inch still ?

    okay well another question the track pad on my 11 inch mac got stuck and wouldnt work and i took it to the apple store and had a tech look at it and he said it was working and i got home and it still wouldnt work so i took it back again to another tech and he said the guy before didnt fix it right and he said it was broken and that i needed a new track pad and he said he would replace it but they didnt have any trackpads in the store at the time but he fixed it enough that it barely works but he said i needed to come back to get a new trackpad because he fixed it enough that it would only work for a short period of time, so i went back the other day to another tech and told him and he said that since it still works they wouldnt do anything about it. but it barely works and barely clicks down should they fix it since the one tech told me it will only work for a short time and that if i came back they would replace my trackpad ? i have apple care and i am still under the 1 year warranty.

  • My ipod got wet and now it keeps turning on and off.

    i got my ipod wet and now it doesn't even have enough power to charge. it just keeps turning on and off

    - Yes. Restoring the iPod erases the iPod.
    - Try a reset to:
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Try placing the iPod in Recovery mode and then restoring
    - Next try DFU mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If you can't turn it off, let the battery fully drain. After charging for  at least an hour try again.

  • My MacBook Pro got wet and I lost all of my childs photos from the day she was born. Is there anyway I could get these pictures back from my iCloud? I actually care more for getting the photos back than I do my laptop. Please help! Thank you!

    My MacBook Pro got wet and I lost all of my childs photos from the day she was born. Is there anyway I could get these pictures back from my iCloud? I actually care more for getting the photos back than I do my laptop. Please help! Thank

    Welcome to the Apple community khnkOliver.
    I assume these photos, or at least not all of them weren't in photo stream.
    You should be able to recover your photos from a back up.

  • My iPod nano 5th generation got wet and now the backlight is so weak I can barley read anything on it. Also, it won't turn on unless it is plugged in (i.e. to a stero or my Mac), so i cant listen to it anywhere but in my house! Help!

    My iPod nano 5th generation got wet and now the backlight is so weak I can barley read anything on it. Also, it won't turn on unless it is plugged in (i.e. to a stero or my Mac), so I cant listen to it anywhere but in my house! Help!

    If the iPod is defective and not abused Apple will exchange it at no cost under your warranty.
    Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • My iphone 5 recently got wet and now if someone calls me I can only hear them if the phone is on speaker. Can you please tell me what to do

    My iPhone5 recently got wet and now if someone calls me I can't hear them. I can only hear them if I put the phone on speaker. Can you plz tell me what to do

    Make an appointment with the Apple genius and get an Out of Warranty replacement for a fee.

  • My Iphone got wet and now when I turn it on it will not go past the apple logo.  Please help.

    Hi,
    My Iphone got wet and now when I turn it on it will not go past the apple logo.  Please help.

    Take it in for service or most likely out of warranty replacement. Water damage voids your warranty so you will need to pay towards the replacement.
    Cheers
    Pete

  • I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

    I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
    Thank you,
    Chris

    Michael,
    Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
    As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
    Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
    Best regards,
    David

  • I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" it my old username before changing it.

    I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" my old username before changing it showed the correct username? please any help would be great.

    Turn Time Machine OFF temporarily in its preference pane. Leave the window open.
    Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the disk image file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Find the one you want to restore from. There's a link named "Latest" representing the most recent snapshot. Use that one, if possible. Otherwise, you'll have to remember the date of the snapshot you choose.
    Inside the snapshot folder is a folder hierarchy like the one on the source disk. Find one of the items you can't restore and select it. Open the Info dialog for the selected item. In the Sharing & Permissions section, you may see an entry in the access list that shows "Fetching…" in the Name column. If so, click the lock icon in the lower right corner of the dialog and authenticate. Then delete the "Fetching…" item from the icon list. Click the gear icon below the list and select Apply to enclosed items from the popup menu.
    Now you should be able either to copy the item in the Finder or to restore it in the time-travel view. If you use the time-travel view, be sure to select the snapshot you just modified. If successful, repeat the operation with the other items you were unable to restore. You can select multiple items in the Finder and open a single Info dialog for all of them by pressing the key combination option-command-I.
    When you're done, turn TM back ON and close its preference pane.

  • TS1702 Sometimes an app goes mute, and it is not something about the volume, it just doesn´t have any sound any more. What should I do?

    Sometimes an app goes mute, and it is not something about the volume, it just doesn´t have any sound any more. What should I do?

    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • My MacBook Pro got wet and I need help?

    We just had a different air conditioner installed above my computer desk. Even though my MacBook Pro was not on top of the desk it still got wet. It soaked through the desk straight on to the pullout computer shelf onto my laptop. We soaked it in rice for a week. We just pulled it out and nothing. The light on the battery won't even light up. Any suggestions?? Is there somewhere I can go for a miracle fix (I'm in Salt Lake City, UT) or am I totally screwed???
    Kristin
    <Personal Information Edited by Host>

    The only thing you can do is take the MBP to an Apple store genius bar or Apple Authorized Service Provider for diagnostics to see what damage the water did.  There is nothing more a user can do than you have already tried.
    Note: it is not a good idea to publish hardware serial numbers on an open, public forum.

  • Updated my Macbook Air to Yosemite and now IMessage won't open pictures

    I updated my Macbook Air to Yosemite a few days ago and since then IMessage has been acting up. It won't let open pictures now. A picture comes through titled "IMG_2882" but when I click on it, it comes up with a description of the image - the type of image, when it was last modified, etc. I click the 'Open with Preview" option and nothing happens. I'm regretting updating to Yosemite now. Is anyone else having this issue? I have no idea how to fix it. Please let me know if you have any ideas! Thank you!

    If it is the third party apps crashing - try downloading another app - any free app is fine. See if that resets the other apps.

  • Z10 got wet and now apps will not open

    Yesterday my phone got wet.  After removing the sim card, sd card, battery and drying overnight it will boot up but now none of the apps will open.
    When I press an icon (for an app), the screen looks like it's about to shift to the active frames screen but quickly reverts to the grid of all my apps. Even within the hub, i can't text or bbm or open emails but everything I've previously received is still there.
    The WiFi and signal strength icons appear at top right, but the BlackBerry icon has disappeared.
    The device still remains functional as a phone: I can make and receive calls and check voice mail.
    I tried to back up but BlackBerry Link but keep getting a connection error.  The closest I got was getting past the password and initiating a backup, which then failed.  Most of the time Link simply will not connect to my phone.  I've tried rebooting the phone numerous times and reconnecting to link, but with no success.
    Solved!
    Go to Solution.

    It sounds like what I have seen multiple times on a device with moisture damage.
    1. Remove the battery immediately!! Do not attempt to turn on your BlackBerry.
    2. Let the device dry in a warm, dry place for 3 to 5 days* (see below)
    3. DO NOT "check it each day" by placing the battery in. Leave it be to dry completely. This takes time. Replacing the battery to check it can only damage it more (moisture + electrical current = disaster).
    4. If the device is warm after the drying period, allow it to cool to room temperature before placing the battery back in.
    Suggestions on drying your BlackBerry in a warm place (open, with the battery out):
    *Place the BB in a container of dry UNcooked rice, and then you might also place it in any of the locations mentioned below.
    *On top of any dry heat emitting electronic component: TV cabinet or CRT, LCD, cable TV/Satellite converter box or plasma monitor
    *On the dashboard of your car on a sunny day
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • Zen Vision M 30gb, used to be able to download music from I tunes, can't now, need he

    I had another computer with I tunes loaded, also used Zen vision M on it along with I Pod, new computer has both products downloaded on it, but for some reason it wont recognize the Zen or let me download music from the i tunes library like i used to

  • How to clone a user-defined object?

    Hello, I need to clone an Object[] array (propArray) that holds objects of Integer, Double, Boolean type, along with objects of user-defined ClassA, ClassB, ClassC type. The matter is that the ClassA object isn't being cloned, while the rest of the u

  • Poor quality slow motion

    i have a montage of a wedding set to three minutes of music, all the slow motion video is choppy, when someone walks across the screen they appear to be stuttering. when viewed on the timeline the motion is smooth and just how i need it to be but whe

  • How to maximize the Report Previewer

    Hi, I'm using Forms and Reports Builder 6i. I'm having problem when launching the report previewer from forms when I use ASYNCHRONOUS. The previewer are not launching sometime on top of the forms. More often the previewer is minimize. Also, how can I

  • Premiere Pro export problems

    I have been having problems exporting from Premiere Pro with my MacBook Pro with OSX 10.9. My exports have dropped frames, sometimes black, sometimes green, sometimes striped or mosaic patterns... I tried updating, I tried de-installing and re-instal