My MacBook Air keyboard has become raised and spacebar is not working!

My sons MacBook Air Keyboard has become raised/warped. The centre point of the raised area is the top left hand corner of the trackpad. I would say the highest point is 2 to 3mm above the normal surface line.
The first signs of the problem was an inconsistency in the spacebar operation. Now the spacebar fails to operate at all! Apart from the Spacebar the Air seems to perform all other functions normally.
The raised area /warped area has also created a wobble when the MacBook Air is on a flat surface. 
Model A1237
MacBook Air 1.6 Ghz Intel Core Duo
Memory 2GB 667 MHz DDR2 SRAM
Serial Number W8806AVHY51
Software Mac OS Lion 10.7.1
Thank you for taking the time to read my issue and hopefully provide some guidance!!

If your Air came with Lion pre-installed you might find it a bit complicated to downgrade. In any event the battery should be replaced under warranty. [My 17" battery was replaced by Apple at the Genius Bar even though the year warranty had expired; they were genuinely concerned since there was a safety issue concerning power!] On the point about your 3 Lion concerns, I note that many on this forum have dealt with similar issues. In my case I purchased a new machine with Lion rather than upgrade my existing Snow Leopard MacBook Pro 13" or iMac 27" and have found there to be no troubles whatsoever. I enjoy the speedy response and smooth execution of tasks on 10.7.2. Good luck with your battery issue. 

Similar Messages

  • MacBook Air is just flashing on and off but not working after trying updates

    This morning I got notification that I was supposed to update my MacBook Air with both update for iTunes and update for Firefox. 
    I hit yes to both.
    Now I am just getting a constant flashing on and off and blank screen alternating with brief picture of the Apple with bar underneath it.
    Have turned on and off several times and still won't work.
    Ideas/

    Welcome to the Apple Support Communities
    I don't think that the iTunes and Firefox updates could do this, but it looks like the logic board is damaged. What happens when you press Shift key while your Mac is starting?

  • After a power failure while iPhoto was running, I get the message "Your photo library is either in use by another application or has become unreadable"  and iPhoto will not open????

    After a power failure while iPhoto was running, I get the message "Your photo library is either in use by another application or has become unreadable"  and iPhoto will not open???? held down the option and the command and tried to run what was ticked off and it just sits there with a spinning wheel and does nothing, can I throw the app away and download a new one? or will it still not open?

    , can I throw the app away and download a new one? or will it still not open?
    You could, but the error message is indicating that your iPhoto library needs repairing.
    Check, if iPhoto will run, if you launch it on a new library. Hold down the alt/option key, while you launch iPhoto. Select to create a new library from the panel that will show. Can you create a new library? If yes, try again to fix the library. Which options have you tried from the Library First Aid panel, when you launched iPhoto with the option and command key held down?
    If you have not tried "Rebuild"; do that next. But be sure to make a backup of your iPhoto library, before you try this.

  • I recently purchased Macbook air mid 2013. Leftside usb port is not working. I think the USB is not going inside completely. What is the solution?

    I recently purchased Macbook air mid 2013. Leftside usb port is not working. I think the USB is not going inside completely. What is the solution? someone can help?

    Invoke your warranty and take it back.

  • I downloaded Elements 13 to my PC, but my PC has windows Vista and it does not work.  How can I download it to my laptop that has Windows 8?

    I downloaded Elements 13 to my PC, but my PC has windows Vista and it does not work.  How can I download it to my laptop that has Windows 8?

    You can get it at this link and validate with your 24 digit serial number - click here for PSE downloads

  • My iphone has turned off and is now not working. I plugged it into my computer and it said it was in recovery mode and i had to restore it to fix it. Is there any way i can fix this problem without loosing all my files and photos through restoring it?

    My iphone has turned off and is now not working. I plugged it into my computer and it said it was in recovery mode and i had to restore it to fix it. Is there any way i can fix this problem without loosing all my files and photos through restoring it?

    There's only one thing you can do: make an appointment with Apple genius at the Apple retail store for a out of warranty replacement.

  • HT1040 I have produced an apple photo book on my macbook air which has been returned because I do not have the correct software.  Is it possible to transfer the photo book file to my desktop that does have the right soft ware and then modify and send to p

    Am I able to import an apple photobook from my macbook air to my desktop?  If anyone could help I would be very grateful.
    Thanks

    You will need to copy the Library to the other machine. You can't move a book, only the library that contains it.

  • My Macbook Air first generation is slow and applications don't work!

    Last week, I woke up to find that my macbook air (first generation) has completely frozen. I went ahead and tried many keys such as esc, etc. until I decided to press on the power button for a few seconds until it restarted. Next, I found an empty screen with nothing but the apple logo on it. I was patient but nothing happened, 3 hours into the wait. I went on the apple support communities and followed a few steps to reboot and ended up with a blue screen, with my start up slowly starting. Ever since, everything takes about x50 the amount of time it takes to do anything for example, when I click on a file, it takes x 50 times longer it takes to open the file or empty the trash, etc. I've tried opening any application to try and back up so I can do a format as they call it, but I can't open any application such as Mail, etc.
    I am not a computer software/hardware literate person but I can understand what's going on and how to follow steps suggested by IT/apple experts. I have also done a hardware check up on reboot and everything is fine with the hardware.
    Please help me get my macbook air back.
    Thank you.

    Two other factors that could impact performance like that .... reduced memory and a too full hard drive/SSD.
    If you click on the apple on the menu bar, and about this mac, does it show you the memory size  you expect to have, ie, 2GB?
    If you can, bring up the Activity Monitor (on your hard drive in applications/utlities) to see if anything is hogging the CPU.
    On your hard drive/SSD, how much free space do you have?  You need 5GB minimum with 10% to 15% being better, for systems usage. Less than that can really slow the system down.
    If you can, bring up Disk Utility (on your hard drive in applications/utilities) and do a verify disk to check the disk status.
    You could reset PRAM ... won't hurt and 'might' help
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    You should be able to run the Apple hardware test by disconnecting any devices, leaving the power adapter in, and reboot holding the D key down. Run the extended test.

  • I am a nurse with a non english speaking pt. He needs his iPad Air keyboard put in chinese and I do not know how. Help?

    I need to put a iPad Air keyboard in chinese. The rest of the iPad is already in chinese so I cant read anything on there. What should I do?

    iOS: How to change the language when it's set to one you don't understand
    http://support.apple.com/kb/HT2371
    Also http://support.apple.com/kb/HT4509
     Cheers, Tom

  • What do I do when my MacBook Air (refirbished) sometimes turns on and sometimes does not when it is in sleep mode and when I turn it off?

    I got this refirbished MacBook Air sometime in the last week or two. Now lately, when I turn it off or put it in sleep mode, then try to turn it on; it will take a long while to turn on or it will turn on normally. Can anyone help me?

    Try a SMC reset.
    http://support.apple.com/kb/HT3964
    If no success, bring the MBA to an Apple store genius bar for a FREE evaluation.
    Ciao.

  • Should I return my new MacBook Pro?  Creative Suite CS and CS2 do not work?

    I am soooooooooooooooo ******!!!!!!!!
    I just purched the top of the line MacBook Pro and learned that the Adobe Creative Suite products do not work on this machine. I contacted Adobe and they said they will not have an update until they release the next version, which won't release until (at the earlies) the end of this year. While Photoshop, Illustrator, InDesign are not crucial aps for me, I do use them for business regularly.
    With this being the case, I ask the mac community using these machines, should I return the computer, buy a g4pb (my TI just literally fell apart) ? Reading the board hear and various news articles, there seems to be a few issues (whine - apps - etc).
    I guess I should have looked into this more before purchasing, but I trusted Apple to release products that are ready for users.
    This is the most expensive computer I have ever puchased and I need it to do everything my TI PB did.
    Is the MacBook Pro worth the early adopter hastle?
    (thank god I haven't opened the box yet!)
    MacBook Pro   Mac OS X (10.4.5)  

    According to Adobe:
    Creative Suite 2 will work on Rosetta with the exception of one componet. Version Cue Workspace (Server) does not work under Rosetta. As of Jan 31 2006 this was the only known issue with using the suite on Intel Mac's.
    Adobe Systems
    Creative Suite: Yes (with performance losses)
    Photoshop Elements: Yes
    (Adobe has posted "FAQ: Adobe Support for Intel-based Mac Computers" [intelmacsupport.pdf]
    http://www.adobe.com/products/pdfs/intelmacsupport.pdf , which discusses Intel support, development, Rosetta compatibility, rough schedules, and more for Mac applications from Adobe and Macromedia.)
    I would recommend that if you are going to use this program that you have 2 GB's of RAM seeing as I hear that Rosetta can be a RAM hog. Hope this helps you out.
    I am soooooooooooooooo ******!!!!!!!!
    I just purched the top of the line MacBook Pro and
    learned that the Adobe Creative Suite products do
    not work on this machine. I contacted Adobe and
    they said they will not have an update until they
    release the next version, which won't release until
    (at the earlies) the end of this year. While
    Photoshop, Illustrator, InDesign are not crucial aps
    for me, I do use them for business regularly.
    With this being the case, I ask the mac community
    using these machines, should I return the computer,
    buy a g4pb (my TI just literally fell apart) ?
    Reading the board hear and various news articles,
    there seems to be a few issues (whine - apps - etc).
    I guess I should have looked into this more before
    purchasing, but I trusted Apple to release products
    that are ready for users.
    This is the most expensive computer I have ever
    puchased and I need it to do everything my TI PB
    did.
    Is the MacBook Pro worth the early adopter
    hastle?
    (thank god I haven't opened the box
    yet!)
    MacBook Pro  
    Mac OS X (10.4.5)  

  • Macbook Air 2013 OSX 10.9.2 iSight Camera not working

    Hello to everyone!
    I have a problem here in my new macbook air 2013.
    Since I updated my osx to 10.9.2 my iSight Camera is not working anymore. I tried to reset the SMC and PRAM without results. I also checked the permissions on my hard disk without any result.
    I've also tried to delete my AppleCamera.plugin file from /Library/CoreMediaIO/Plug-Ins/DAL/ and I tried to use another one from OSX 10.8.4 but it's not working.
    What can I do more?
    Is there any way to fix this problem without formatting?
    Regards,
    Marco Alioli

    marcoalioli wrote: ... What can I do more?...
    Some other ideas in iSight camera failure after OS X 10.9 Mavericks update

  • My iBook's Keyboard Space Bar, right and F5 buttons not working...

    Yesterday I cleaned up my iBook's keyboard. Everything was working fine until I left my computer idle, even backlight of the display was dimmed. Then I noticed that my display was lit again, like if I had pressed a button on the keyboard, but I was away of my computer, I was on bed. Suddenly the keyboard started acting weird like if it had the command key pressed, so i disconected all power supplies and let the computer opened on my desk. I suspected that the keyboard somehow got wet, but I doubt it.
    Today everything seem to be working fine, until I tried to type something and noticed that the space bar, F5 and the right arrow (also end) don´t work :S
    I need help of what can be causing this, i already tried reseting the PMU, removing all power sources, checking preferences and even repaired permisions and noting seems to work. I just hope that my keyboard is not defective since my iBook just lost warranty past august :S
    iBook G4 1.33GHz   Mac OS X (10.4.7)  

    I cleaned it with a mild soap and a clean cloth. Both were damp. I have cleaned it like this before and had no problems.
    iBook G4 1.33GHz Mac OS X (10.4.7)

  • The iTunes Radio tab on my MacBook Air is coming up blank, and I'm not sure where to go to start a station.

    Here's what I'm faced with. Is the tab just not working, or am I missing the Crucial Key to Success? I'm in iTunes 11.
    Thanks

    Here's what I'm faced with. Is the tab just not working, or am I missing the Crucial Key to Success? I'm in iTunes 11.
    Thanks

  • Aluminum Keyboard keys "n", "y", and right "shift" not working

    My cat knocked over a glass of water on my desk, and while the keyboard attached to my MacBook didn't get water directly into it from the top, it was eventually surrounded in water. It's now dry, and everything works ok except for the N Y and right SHIFT keys. Has this happened to anyone else? Do you know how to fix it? I've tried in in my MacBook Pro and the same keys don't function. I've just tried taking a hairdryer to it to no avail.
    Any other suggestions? Perhaps its time to buy the wireless version afterall.
    Thanks!
    D.

    No real suggestion than to let it dry out more. If it was just water then there's a decent chance that it will "probably" work.
    You might have a look at Removing the individual keys. I wouldn't suggest actually trying to take it apart!

Maybe you are looking for

  • Help plz,how to activate open line item,which is already saved in fs00

    hi, I have created reconsilation where i forgot to check open line iteam,when I try to creat f-53, it is asking, for open iteam ,,when I go back to F-53, i couldnt find, it, to change, what to be done, or should i need to delet advance paid to vendor

  • Sharepoint designer workflow 2010 change status

    Hi        I have a document library which contain certains folders .I have written a sharepoint designer OOB workflow (i e  a simple approval workflow) When I tried to add some items inside a folder for eg I have a folder named Test  and i add a docu

  • Call java/jmf from javafx

    I have a jmf application written in java that captures video from a mini-camcorder through a firewire cable and saves it to disk. I currently use a swing gui. I wanted to creat a gui in javafx and call the java program from within javafx. Even with j

  • Running java in Bash script

    Hi all, I need to run a bash script in Linux which will then run a java program. I managed to run the script successfully (and running the java program eventually) by doing ./myScript. However, when my script is being called by some other programs, t

  • Validate ship to party depending on sold to party

    i need Validate ship to party depending on sold to party from the table knvp in which userExit should i write the  code??