My Macbook air stopped responding to the password....HELP!!!

Aloha
My MacBook Air stopped responding to its password, what might I have done wrong?
How can I find out what it things the password might be?
Dan Page
Hawaii

It might help to reset the connection settings on your Mac using these steps one at a time until the problem is resolved, recognizing that, depending on your problem, not all of these steps will make sense:
1) Use the AirPort/Wi-Fi menu bar item to turn AirPort/Wi-Fi off, then on again.
2) Try to select your Wi-Fi network from the AirPort/Wi-Fi menu.
3) In the Network panel of System Preferences delete the AirPort/Wi-Fi item from the left column, then add it back.
4) In the same panel as (3), define a new location and see if you can make that work.
5) In the same panel, select the AirPort/Wi-Fi connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease".  Note that the fix this step implements may be temporary.
6) In the folder /Library/Preferences ( _not_ <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
These steps may not help, but they'll only take a couple of minutes to try.  Before you try these, if you have any special network settings on your Mac for things like DSL credentials, note all your network settings, because the latter steps will destroy them.  If you got all the way to the last step, if things don't work any worse than before, you can trash the saved SystemConfiguration folder.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject.  In the future just type a short summary of your post into that field and type the whole message into the field below that.

Similar Messages

  • What if i have a used macbook air and it has the password of the old person to logout?

    what if i have a used macbook air and it has the password of the old person to logout?

    You need to completely repartition the drive and install a suitable version of OS X that you own. What is the exact year and model of this MBA you have? Did it come with installer discs? If it's a 2010 or later model you can accomplish this using Internet Recover: About OS X Recovery.
    Install Mavericks, Lion/Mountain Lion Using Internet Recovery
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    This should restore the version of OS X originally pre-installed on the computer.

  • MacBook Pro stops responding to the Apple Remote

    Rather often, my MacBook Pro (17", 2010) stops responding to the Apple Remote.
    It can happen after an hour of use, or after five minutes, it is not a consistent thing.
    This has happened from the beginning, but sometime around 10.6.6 it seemed to be fixed.
    Alas, it has returned when I upgraded to 10.6.7.
    I have filed it as a bug, but I haven't seen any other mention of this problem.
    When it happens, I can "fix" it by "disabling" the remote and the "reenabling" it (under System Preferences->Security, check and again uncheck the box that says "Disable remote control infrared receiver"). A notoriously abnormal side effect of this bug is that the first click in this checkbox also sends the System Preferences application to the background; I have to then bring it to the foreground again to click a second time to uncheck the box.
    Has this happened to anyone else?

    There are three generations of ATV's 1st,2nd(720p),and 3rd(1080p). I would try unpairing the IR remote and then pairing the remote to the ATV3 again. http://support.apple.com/kb/HT1555

  • Macbook air stopped connecting to The Cloud wifi network in the UK

    I used to be able to connect to The Cloud wifi network in local bars, cafes and restaurants on all my apple devices, but my macbook air has stopped connecting to this network. My iPhone and iPad still connect no problem. The bar at the top of my macbook air tells me I'm connected to The Cloud wifi, but I am not taken to the login page and hence can not connect to the internet. This used to work no problem. I'm not sure, but this issue may have occurred around the time I installed OS X Mavericks. I have recently installed OS X Yosemite and still have the same connectivity problem. My macbook air connects to other wifi networks such as my home network and my work clients' networks. Any help or advice anyone can offer would be much appreciated.

    G-band networks generally will have a stronger signal than n-band.
    Tell it to ignore the g network and only connect to the N-band network.
    Open Network System Prefs, select WiFi, and click Advanced...
    Click on the WiFi tab.
    Find you g-band network in the list and delete it.
    Check the box to Remember networks this computer has joined.

  • I set up an apple ID and password on my iphone but then my MacBook Air won't recognize the password

    I set up an apple ID and password on my Iphone and the apple mail account works fine on the Iphone.
    I then went to my MacBook Air and entered the same ID and password to set up an apple mail account, but it says my password is incorrect.
    How can that be?

    More information--I deleted the apple email account from my iPhone and created an apple email account on my MacBook Air. It worked fine on the MacBook, but then the password would not be recognized on the iPhone. It is as if I can only have an apple email account on only one device at a time!

  • The internal camera on my macbook air stopped working.

    The internal camera on my macbook air stopped working. The camera is non available in settings also. Please help.

    Check if it is a hardware issue. If it is take the MBA to an Apple dealer.
    Apple menu / About the Mac / More Info / System Report.
    On the left, under Hardware, click on USB. The right side will show the USB Device Tree. Check to verify the camera is listed. Should be called Built-in iSight. If it is not listed, take the computer in for a full diagnosis.
    If the camera is listed, click on Launch Pad then click on Photo Booth. Do you see anything?
    Launch pad
    Photo Booth

  • I have a macbook air and i forgot the log in password, how do i get into my computer?

    I have a macbook air and i forgot the log in password, how do i get into my computer?

    10.6 and prior: http://support.apple.com/kb/HT1274  10.7 Lion: http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/

  • I have a new MacBook Air and I set my password the other night and forget what I selected. Now I can't start using the computer because I can't get through password gates! Please help!!

    I have a new MacBook Air. I set my password the other night when I was half asleep and can't remember it. Im still working on my old MacBook Air and can't get through the password gate on my new one. How can I reset it on that computer? I can't even get to the internet.
    Thanks!

    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Select Terminal from the Utilities menu. At the Terminal prompt enter:
    resetpassword
    Press RETURN. You will get a GUI in which you can reset your password.

  • My MacBook Air is stuck on the login screen, each

    My MacBook Air is stuck on the login screen, each time I enter the password it stops (but does reject an incorrect password)

    Restore OS X.
    If your Mac has v10.7, v10.8, or v10.9 installed, startup your Mac while holding down the Command + R keys. From there you can restore OS X using OS X Recovery
    For OS X prior to v10.7, boot from your install disc while holding down the C key.

  • Hello ,, i have a macbook air and forget it's password

    I have a macbook air ,, and forget it's password ,, i was reset the password but when i open my device a got an alert that ask me the keychain password could support me please

    OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
    Reset Password starting from Recovery HD
    In the keychain password dialog box that appears, select  "Create New Keychain".
    Best.

  • My macbook air stopped working suddenly and started beeping no backlight ...just beeping

    my macbook air stopped working...and started beeping...how do I recover...no backlight ....just beeping

    three beeps in a row?  That indicates the RAM is bad on the logic board.
    verify the scheme of the beeps and report back.
    3 beeps = RAM is bad
    4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
    5 beeps = processor is not usable

  • My macbook air stopped working

    My macbook air stopped working just a few days ago, when I press the power button I get the startup sound and a white screen, nothing more.. No loading indicator, no apple logo.
    As holding the option key when booting didn't work and I didn't got the startup drive selector I removed my HDD and tried again, this time I could get to the startup disk selector screen and selected my repair disk.
    So I think it's an problem with my HDD, I reinstalled the HDD and rebooted with pre-selected startup disk; the repair disk. And still I don't see my HDD, not in the disk utilities.
    Anyone who can point me in the right direction of mounting the HDD again to repair it? Or can I put it with the trash?

    Hi Hummel Nederland,
    Thanks for using Apple Support Communities.  This article has a few additional steps I would recommend trying for your boot issues:
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/ts2570
    Cheers,
    - Ari

  • How can I automatically "retract" all windows from my Thunderbolt display back to my MacBook Air when I disconnect the display, esp if the Thunderbolt is the desktop with the white menu bar?

    I am in and out of my office with my MacBook Air.  I would like to set it up so when I plug in my Thunderbolt display in the office, the Thunderbolt display has my desktop, menu bar and the open windows.  If I set the Thunderbolt display to mirror by MacBook Air it adjusts to the lower resolution of the MacBook Air, which is a waste of a cool monitor.  I can set it up as an extended desktop and drag the white menu bar to the Thunderbolt display so it displays my desktop but if I then disconnect my MacBook Air, the menu bar is absent and all the windows that were seen on that display are absent, as if it I was still attached to the larger display.  The only way around this is to go to Thunderbolt display preferences, drag the white menu bar back to the smaller display and manually drag all windows to the smaller display before disconnecting.  Doing this multiple times per day is a real pain.  Is there a way to set my MacBook Air to recognize when it is attached to the Thunderbolt display and automatically my desktop and all open windows to it and then do the same process in reverse when I unhook it?

    It's definitely not supposed to work like that...when you plug the display in, it should just turn on and adjust your displays.  It works like that on my MBP.  Kind of a silly question, but do you have the MagSafe from the display plugged in your MBAir too?  Thats a requirement.  Beyond that, it should "just work."
    Not sure if there is some setting to enable...i haven't seen it.  Call to support?

  • How can I convert my Open Source document files into Word document files? I cannot download Pages since my Macbook Air does not have the most recent software.

    How can I convert my Open Source document files into Word document files? I cannot download Pages since my Macbook Air does not have the most recent software. I downloaded open office to my mac to try and save money. It worked well for a while. Now I get this pop-up message that asks me to "Reopen" and when I select the option, nothing happens. I cannot save my documents anymore and I cannot convert them to word. Help!

    dwb wrote:
    Does OpenOffice output Word documents by default or do you have to select it manually?
    You have 17 options to save as in Open Office, one of which is .doc  files,  yes it needs to be saved manually.
    You may be able to default to DOC, but have not tried same.
    Since Open Office is 99% same as Word, I use it, or Word, either one.  Open Office is a bit less buggy than Word 11'

  • I have a MacBook Air and recently downloaded the new operating system. Since that time, I am no longer able to access my personal ITunes library to add music to IPhoto slideshows.  I put I tunes library on my desktop, as suggested. How do I drag it?

    I have a MacBook Air and recently downloaded the new operating system, 10.10 OSX Yosemite. Since that time, I am no longer able to access my personal ITunes library to add music to IPhoto slideshows.  I put I tunes library on my desktop, as suggested. How do I drag it to the I Photo slideshow?

    That crash appears to be casued by the Facebook plug-in.
    Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots  and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.

Maybe you are looking for

  • How to send mail to different text file

    Hello experts. I follow the example in the manual under What I have discovered is that it will send email no matter which Organization a user is created in. e.g. Top or Top:MyOrg sent to text file ie Notification file( I use text file and not the SMT

  • Is it possible to add the YEAR to the date shown in the Lockscreen?

    TIA.

  • Photo resize in photo stream

    I have tons of photos import to  my iMac and it automatically upload to  cloud to become photo stream. I saw the photos in photo stream in my Mac shows resolution in 3872X2592. But after my ipad 2 completely downloaded all the photos in photostream,

  • Convert hexadecimal output to decimal (number)

    I am reading hexadecimal format from the output of the VISA read block and I want to convert it to the decimal preferably exponential format. Example of what I read is 76 00 02 (in dec: 7.600 E+2). I know there is "type cast" block that converts nice

  • Hyperion Planning application is not opening

    Hi experts!! my question is related to Hyperion Planning application. I'm trying to open the planning application thruogh workspace/planning but it's not opening. I searched planning server log and found the following : ####<Oct 25, 2012 3:48:49 PM I