My macbook air stopped working

My macbook air stopped working just a few days ago, when I press the power button I get the startup sound and a white screen, nothing more.. No loading indicator, no apple logo.
As holding the option key when booting didn't work and I didn't got the startup drive selector I removed my HDD and tried again, this time I could get to the startup disk selector screen and selected my repair disk.
So I think it's an problem with my HDD, I reinstalled the HDD and rebooted with pre-selected startup disk; the repair disk. And still I don't see my HDD, not in the disk utilities.
Anyone who can point me in the right direction of mounting the HDD again to repair it? Or can I put it with the trash?

Hi Hummel Nederland,
Thanks for using Apple Support Communities. This article has a few additional steps I would recommend trying for your boot issues:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Cheers,
- Ari

Similar Messages

The internal camera on my macbook air stopped working.

The internal camera on my macbook air stopped working. The camera is non available in settings also. Please help.

Check if it is a hardware issue. If it is take the MBA to an Apple dealer.
Apple menu / About the Mac / More Info / System Report.
On the left, under Hardware, click on USB. The right side will show the USB Device Tree. Check to verify the camera is listed. Should be called Built-in iSight. If it is not listed, take the computer in for a full diagnosis.
If the camera is listed, click on Launch Pad then click on Photo Booth. Do you see anything?
Launch pad
Photo Booth

My macbook air stopped working suddenly and started beeping no backlight ...just beeping

my macbook air stopped working...and started beeping...how do I recover...no backlight ....just beeping

three beeps in a row? That indicates the RAM is bad on the logic board.
verify the scheme of the beeps and report back.
3 beeps = RAM is bad
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable

Why my macbook air stopped working and started beeping?

I was working with my macbook air, but sunddenly it stopped working and started beeping. why this happend?

What sort of beeping?
Intel-based Mac Power On Self Test RAM error beeps
Power On Self-Test Beep Definition - Part 2

Suddenly on sunday while i was working, my macbook Air stopped working, right after that i tried getting it on but nothing came other than a grey screen with a question mark right in the center could you please help me in rectifying the problem. Would th

Suddenly on Sunday while i was working, my macbook Air which i bought last year in Spetember from Arkansas, Little Rock stopped working, right after that i tried getting it on but nothing came other than a grey screen with a question mark right in the center. Could someone please help me in rectifying the problem. Would thi issue also affect saved data. However, I have handed the notebook to Apple for reapirs and they will revert by Thursday 12/04/2012.

I just received some horrifying news from Adobe about my production suite. I just FINALLY learned today that what I've been trying to do for over a week now - CAN'T be done because of compatability issues involving updates of both Adobe & Microsucks Winders!!! I sincerely hope this is not your problem. Mine is ALMOST HOPELESS!! Being in this HOPELESS Obamma economy,,,, leaves NO STIMULUS in which to currently upgrade everything that needs upgraded for me to fully use my INVESTMENT in Adobe Suite - sad, horrible and SICKENING!!!
I just wanted to post this. And again, I truly hope you find a solution. Good Luck!

External sound output on Macbook Air stopped working

Two months ago, my Macbook Air went silent.
I tried every trick I was suggested, including upgrading to Mountain Lion OSx , after which sound came back for a few day then disappeared again.
Their is no external speakers listed under <system preferences / sound / output>
Internet is full of this complains, I mean it is not regional and limited to a particular version of hardware/software... complains are coming from everywhere across the world since 2008.
Unfortunately tech support at Apple appears to have no clue as neither hardware change nor software update / upgrade doesn't seem to solve the issue permanently. But they still replace parts and software for some reason, just to drive people crazy later.
I am confident that this issue has already been told to design team , the problem was known for years after all.
What is this? Does Apple expects people to trash their computers when this happens? and get a new one? Is this because Apple asks new customers if they want to recycle their old computers with them?
You probably think I am an Apple hater , I am not. I like their products but I hate their tech support, I am sick and tired of listening to so-called geniuses , bunch of untrained high school kids with a lot of BS.
Only hope I have left is, somehow, there maybe someone out there who already solved this problem... Are you there?
MacBook Air specs :
Processor 2.13 GHz Intel Core 2 Duo
Memory 2 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400M 256 MB
Software OS X 10.8
Other Apple products I use together with this Mac :
Magic mouse
Apple TV latest
iPad latest
iPod touch 4th gen.

I finally found the solution,
the solution itself actually explains why Apple was so silent about this issue
because every macbook that was sold over the last 5 years was defective ,
it will probably cost Apple $100s of millions to recall them
It is the Audio Board Flex Cable, Part #: 922-8380
this cable goes bad quickly,
it is defective because this is strickly a design issue
I opened the macbook and replaced it myself,
all looks fine now

Why does the sound to my MacBook Air stop working after it wakes up from sleeping?

When I leave my headphones in the headphone jack and then close the computer to sleep, when it wakes back up the sound will not work.
It doesn't work with the headphones in or out, it is just completely disabled. I tried muting and unmuting and and toggling the volume but the only thing that works is restarting the computer.
Obviously, the sound works after restart but it is an inconvenience due to the tone on restart which is not the greatest noise when trying to work with a sleeping baby in the house (Which is why I use headphones in the first place.)
Any help is much appreciated.

Plug in the headphone and remove it
1. Reset PRAM. http://support.apple.com/kb/PH4405
2. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
Remove the logitech mouse receiver if you have one.
Update Boom, Windows Media Player and all other third party plug-ins.

USB ports in my macbook pro stop working

For a few months now the USB ports in my Macbook Pro stop working. The mouse is unable to move the pointer, therefore, I have to use the trackpad to select things. Then, when i try to shut it down it refuses to shut down, so I have to hold the on/off button to turn it off. When I turn on the laptop, the problem goes away. It's been happening more often for the last few weeks. Is there a problem with the software or is it the fact that I never used a base to raise the laptop, until recently, to let air in below so it doesnt heat up so much?
Any help is appreciated.

Hi h,
Try an SMC Reset: http://support.apple.com/kb/HT3964

My Macbook air stopped responding to the password....HELP!!!

Aloha
My MacBook Air stopped responding to its password, what might I have done wrong?
How can I find out what it things the password might be?
Dan Page
Hawaii

It might help to reset the connection settings on your Mac using these steps one at a time until the problem is resolved, recognizing that, depending on your problem, not all of these steps will make sense:
1) Use the AirPort/Wi-Fi menu bar item to turn AirPort/Wi-Fi off, then on again.
2) Try to select your Wi-Fi network from the AirPort/Wi-Fi menu.
3) In the Network panel of System Preferences delete the AirPort/Wi-Fi item from the left column, then add it back.
4) In the same panel as (3), define a new location and see if you can make that work.
5) In the same panel, select the AirPort/Wi-Fi connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease". Note that the fix this step implements may be temporary.
6) In the folder /Library/Preferences ( _not_ <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
These steps may not help, but they'll only take a couple of minutes to try. Before you try these, if you have any special network settings on your Mac for things like DSL credentials, note all your network settings, because the latter steps will destroy them. If you got all the way to the last step, if things don't work any worse than before, you can trash the saved SystemConfiguration folder.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

I have pluged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?

I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
Help.

BB1B2,
The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
Sorry,
Clinton

My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?

My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?

I would do another SMC reset. If nothing changes you should take the computer in to an Apple store for a free diagnostic. You should make an appointment.
http://www.apple.com/retail/geniusbar/

My hard drive on my MacBook Pro stopped working and I had to replace the hard drive. I cannot get my playlists and photos to appear in my iTunes and iPhoto. Does anyone know how to resolve this?

My hard drive on my MacBook Pro stopped working and I had to replace the hard drive. I cannot get my playlists and photos to appear in my iTunes and iPhoto. Does anyone know how to resolve this?

Peace Lilly wrote:
... Will I loose everything if I connect the iphone to the itunes as a new device?
To avoid that...
See these 2 Links...
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991

Configure macbook air to work with projector

Do I need to configure my new MacBook Air to work with a digital projector or should it work automatically without any setting up other than connection to the projector?

If you have a Lightning to whatever input that the projector has more than likely HDMI, VGA, or DVi you should be able to to hook the projector up with no problem. You can find a number of different displayPort outputs in the apple store or other electronic online/stores. Once connected to the projector you can choose to have the the additional desktop displayed or you can enable Airplay Mirroring in the Displays section under System Preferences. You can also close your Air and use a bluetooth mouse and keyboard and completely operate through the projector screen.

Power adapter of my macbook pro stop working

suddenly the power adapterr for my macbook pro stop working, the charger was working normally, anyone know of any evidence to verify its operation?

Hi ..
Try here > Apple Portables: Troubleshooting MagSafe adapters

My 13" macbook just stopped working. When you turn it on you get a white screen and hear a repetitive clicking sound on the left side. Is this the hard drive? Any suggestions on replacement drives?

My 13" macbook just stopped working. When you turn it on you get a white screen and hear a repetitive clicking sound on the left side. Is this the hard drive? Any suggestions on replacement drives?
Thanks

Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

My macbook air stopped working

Similar Messages

Maybe you are looking for