My MacBook Air will not print wirelessly to my Canon Pixma MX410

I recently got a MacBook Air computer from work. I have not been able to set up the wireless printing at home via my Canon Pixma MX410 printer. I can get it to print from my MacBook Air if i connect it via USB. and I can get the Canon to print wirelessly from my personal Dell Laptop.
No matter what I have tried: Downloading the Printer Driver MX410 Series 106702.pkg
and still i get the same error.
The Printer is not Connected. I don't understand how that is, when i can still print from my other computer. There is some setting that i do not have correct on the MacBook. What do i need to adjust? I can't seem to find where it might be in the System Preferences. When i look at Network It show's i'm connected to my home Wireless Network. but i still am unable to print.
Please help.
Thanks!

As you can see here, that particular Canon printer is not supported by AirPrint:
http://support.apple.com/kb/HT4356
More importantly, these directions should help in trying to set up your printer.
http://support.apple.com/kb/HT3500

Similar Messages

My Macbook Air will not print wirelessly!

My Macbook Air will not print wirelessly using the connection between it and my iMac which is connected via USB to my Canon Printer. The iMac and the Air are both using the same network and the printer is found on the Air... it sits at idle, but when I press "Print" on my Air it never actually prints. There is just a flash of the print icon on the Dock and then it is gone... I am left with no reason or error message. My colleagues are able to print wirelessly with no issue using their Macbook Pro and the same connected iMac. Can anyone help with this?
Macbook Air: OS X 10.8.3
iMac: OS X 10.7.5
Canon Printer: ImageClass MF4370dn

Hi JDP86,
Thanks for using Apple Support Communities.
If your printer is wireless-capable, you should first add the printer to your network. Use the printer's control panel, or temporarily connect the printer to your Mac via USB.
Use this article to troubleshoot printer issues in OS X.
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Best of luck,
Mario

Officejet Pro 8600 - Macbook Pro and Macbook Air will not print

Products:
HP Officejet Pro 8600
Macbook Pro (Mac OS X, Version 10.7.5)
Macbook Air (OS X, Version 10.8.2)
Question:
Why did my Macs initially print fine, but now will not print at all?
Full Story:
I have a wireless network at my house that consisted of a 30mb cable internet, Netgear 900n, HP Officejet Pro 8600, 2 Dell Laptops with Windows 7, a Lenovo Laptop with Windows 7, and Dell Tower with Windows 7 - All printed just fine.
The HP Officejet 8600 was added to my network about 2 months ago.
I added a Macbook Pro and a Macbook Air about 3 weeks ago. Both Macs printed just fine for about a week. Then suddenly they stopped. I spent about 2 hours on the phone with HP Service, and they finally said it must be my router. So I called Netgear. Netgear was useless! They wanted me to agree to charges for services before they would even discuss the issue.
Due to information provided by HP's service support, and because Netgear will not support their product, I promptly purchased a new router - an Apple Airport Extreme.
The Macs recognize the printer, will print if hardwired via a USB cable, but will not print wirelessly to the Officejet Pro 8600. The PCs print fine.
The frustration that is being felt is compound by the fact that the Macs printed just fine with the Officejet Pro 8600 2 weeks ago, and now the printer just shows "idle"... even with a new router. (see image below)
Please help, I appreciate any support.
As a side note, the HP Service rep was very friendly, and definitely tried to support the HP Product, which is much more than I can say about Netgear.
Thank you,
This question was solved.
View Solution.

Hi,
More likely the issue related with Multicast, which Apple devices relies on to communicate with teh device through the network.
First try unplugging the router for 30 seconds.
Plug it back to the power and wait for 2-3 minutes.
Turn the HP printer Off and back On, then check for any difference.
If the same persists, try changing your router configuration as following
Note: the settings below are not related with the HP product, I provide you the steps as a best effor and those are only based on my own knowledge. you may try modifying the router settings at your own risk:
Open the router configuration page (can be found listed as the Default Gateway by clicking the Wireless icon on the printer, then print a network configuration report.
Click the Advanced tab.
Click the Setup option from the menu, then click on WAN Setup.
Make sure to uncheck the box next to Disable IGMP Proxying and Apply the changes.
Click the LAN Setup on the same Setup menu.
Set the RIP Version as RIP-2 and Apply the changes.
Reboot your router and then check for any change.
I hope you may find that information useful, you may also use the user guide below for further information:
http://www.downloads.netgear.com/files/GDC/WNDR4500/WNDR4500_UM_07DEC2011.pdf
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

MacBook Air will not print on wireless Epson printer. It says 'filter failed'

MacBook Air all of a sudden will not print on wireless Epson printer. The error message is 'filter failed'. Shut down everything and rebooted, but still not printing.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select
/var/log ▹ cups ▹ error_log
from the hierarchical list on the left side of the Console window. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last failed printing attempt. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
☞ The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.

Why is it my macbook air will not print coupons after installing java?

why is it i cannot print coupons from my macbook air after installing java?

Hi JDP86,
Thanks for using Apple Support Communities.
If your printer is wireless-capable, you should first add the printer to your network. Use the printer's control panel, or temporarily connect the printer to your Mac via USB.
Use this article to troubleshoot printer issues in OS X.
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Best of luck,
Mario

Macbook Pro 2011 not printing on network with canon pixma iP4500

Hi
I am not able to print satisfactorily from my 15" MacBook Pro 2011 to my QNAP TS439 server that has my Pixma iP4500 installed. I contacted apple support and after 45 minutes the operative gave up and said it was a QNAP problem. I am fairly sure it is not, so please read on...
Here is what happens. I ( myself and Apple) select the correct printer from the menu on my MacBook Pro with the correct path and printer on the server using Snow Leopard 10.6.8. As soon as I go to print something it says it is waiting for 10 seconds, very quickly it gets extended out past 30 seconds, but never prints.
I have tried another driver called the Canon Pixma iP4500 Gutenprint v 5.2.3. This will only print in black text. If I try to print colours, I get a very wishy washy pastel effect that just about shows that there might be some colours there. This is hopeless and most unsatisfactory.
In my opinion, this points the finger at Canon's printer driver that has been supplied to Apple, because the printer driver for Windows 7 works perfectly from the Windows 7 x64 PC.
Does anyone have a solution to this?

Just a quick reply for others in case it helps....
First you have to install the Canon drivers for Yosemite from Canon Printer Drivers v3.1 for OS X.
Then since I had reset my Canon MP620 network settings, I had to start from scratch. I connected the printer to my new computer (with Yosemite) via USB and then launched the Canon IJ Network Tool.app (downloaded from the Canon web site) and it found the printer. However it hung on the last step "Searching for printers via access point...". At that point (after waiting a minute for it to give up), I had to read the IP from the Canon printer and enter it by hand in the Network Tool dialog.
I then unplugged the USB cable, and went to the Printers and Scanners system preference panel. After a few minutes, the printer showed up and I was able to set it up.
I then tried to set up the printer on a 2nd computer, running Mavericks. The Canon printer would not show up in the Printers and Scanners system preference panel, but after I launched Canon IJ Network Tool.app on that computer, the printer did show up and I could set it up there as well. This is all much more convenient than using a USB cable and sharing the printer, but, dang, is it complicated!

Macbook air will not connect to the wifi network

I recently had to replace my wireless network router and now my macbook air will not connect to the network. it worked fine with the old wireless router. Now, i get a "unable to join wi-fi network" message. The network ID (SSID) and password (WPA) are the same as before. I try to manually enter the password, but continue to get the previous message.
Any help in figuring out how to correct this problem is greatly appreciated.
Also, I have several PCs in the house that have had zero problems connecting to my wireless with the new router. What am I doing wrong?

Hi,
Ever since did the last airport utility update this has been happening.
I believe the airport utility update is solely a software update. Repair permission and repair disk (boot from your installation disk A) may help.
Other wise, http://osxdaily.com/2009/12/22/mac-wireless-problems-guide-to-troubleshooting-ai rport-wireless-problems-on-your-mac/ may help, too.
Cheers.

My MacBook Air will not turn on. I get a white screen with the apple logo and a spinning star that just does that for hours

My MacBook Air will not turn on. I get a white screen with the apple logo and a spinning star (search icon). It will spin for hours and never go away unless I power off.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

OFFICEJET 4622 WILL NOT PRINT WIRELESSLY AFTER MULTIPLE TIME TRING TO INSTALL mutiple times

My printer will not print wirelessly. I see that it is installed and the firewalls are turned off but it will not print

Hello phdavid53,
Welcome to the HP Forums!
I understand your Officejet 4622 will not print wireless. I will do my best to assist you! First, I would like to ask you a couple of questions to clarify: When you installed this printer on your computer, were you able to print a document? Did the installation state it had a successful wireless connection?
I would recommend following this entire HP document on Printer Does Not Maintain Wireless Connection.
What is your operating system on your computer? Windows or Mac?
If you were never able to install this printer over a wireless connection through the software, then please follow this HP document on 'Unable to Find Printer' Error Message Displays on the Computer During a Wireless Network Installati.... I will be looking forward to hearing from you. Have a great night!
I worked on behalf of HP.

My macbook air will not connect to the internet due to a self assigned IP address. I have tried trawling the support forums, but either I can't understand the suggestions, or they don't work. Please explain to me in simplest terms how to fix this. Thanks!

My macbook air will not connect to the internet due to a self assigned IP address. I have tried trawling the support forums for hours, but either I can't understand the suggestions, or they don't work. Please explain to me in simplest terms how I can fix this. Many thanks!

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

HP OfficeJet Pro 8600 Will Not Print Wirelessly

Hi. I have read other threads on this forum with suggested fixes from HP employees and tried them. I have run the tool which found no errors. My firewall is off. I have installed the latest Adobe and uninstalled then reinstalled the printer software. I have followed instructions in book re: turning off computer, router, printer, etc. I can see the IP address for the printer in IE.
Still, this brand new printer will not print wirelessly or otherwise from my hp laptop. VERY frustrating. I have spent hours trying work arounds for a brand new computer. I would greatly appreciate a response regarding how to resolve this problem. Thank you.

I have seen cases where a troubled install went through flawlessly after the computer was reimaged. That may be an option to consider.
I did want to make sure that you had the most current firmware version and it looks like you do.
Before a reimage, you could uninstall Officejet Pro 8600 programs (if there are any) and download and install the drivers for your printer from hp.com. Click here for the HP Officejet Pro Full Feature Software and Driver. By doing this, you would have the most up-to-date drivers. Sometimes a download will work where a disk does not. It you do decide to reimage, I highly recommend the above download for the installation.
Let me know what happens.
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

My Mac Mail subfolders on my MacBook Air will not sync in alphabetical order. I am assuming it is a setting that I am not finding since my iMac based at my home office is fine, so is my iPad and iPhone. The core source is Exchange.

My Mac Mail subfolders on my MacBook Air will not sync in alphabetical order. I am assuming it is a setting that I am not finding since my iMac based at my home office is fine, so is my iPad and iPhone. The core source is Exchange.

If you have been using the mac.com Apple ID to make iTunes purchases recently, then there should be no issues continuing to use it with the new iPhone. I would abandon the new ID as you will never get Apple to merge the two IDs. I have had a mac.com ID for years and continue to use it with my iPhone 4S.
Tell us the issues that you encounter trying to set up the iPhone with the mac.com account.

MacBook Air will not reboot. A file folder with a question mark in the center of it appears. What is the problem?

MacBook Air will not power on or reboot. A file folder with a question mark in the center of it appears. What is the problem?

Go step by step and test.
http://support.apple.com/kb/ts1440
Startup Manager to select Startup disk.
http://support.apple.com/kb/HT1310
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
Reset PRAM.
http://support.apple.com/kb/PH4405
Reinstall OS X
If this does not help, contact Apple.
Best.

IMessage on my macbook air will not connect.

iMessage on my macbook air will not connect. It says "Could not sign in. Please check your network connection and try again." I have gone through all the support instructions and a lot of these discussion chats. I have sign out of it and my phone and resigned in. I have checked that everything is verified and connected. My ios is up to date on both my computer and phone. It worked fine until about a week ago and suddenly it stopped
Thank you for your assistance!

Hi,
In Hard Drive/Library/Fonts do you have the AppleGothic.ttf Font.
The iMessages account uses this to "register".
If the computer has been Off then the App effectively "registers" the Apple ID again.
It cannot do this is the Font is "missing".
The thread I saw that highlighted this as an issues said the font could be downloaded from Apple but not the "how" of that.
8:08 pm Wednesday; July 16, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

TS1647 My Macbook Pro will not print anything from any program. I've reinstalled the drivers. I get an error message in Word that says, "Word could not communicate with printer." Any ideas?

My Macbook Pro will not print anything from any program. I've reinstalled the drivers. I get an error message in Word that says, "Word could not communicate with printer." Any ideas?

Be sure to try restarting, if you have not done so since this problem occurred. You should also power off the printer while you do the restart...
If that does not help, you can try resetting the printing system. Open System Preferences Print & Scan (or Print & Fax) pane. In the sidebar with list of printers, right (control) click anywhere. Select Reset printing system. You will have to add back your printers after you do this.

My MacBook Air will not print wirelessly to my Canon Pixma MX410

Similar Messages

Maybe you are looking for