My macbook air wont got past the white loading screen

HELP! I only got my macbook air yesterday and it was working fine all last night and i havent dropped it or anything. This morning i went to turn it on but it wont got past the white screen. When i turn it on it makes the start up noise and the apple logo come up and so does the loading sign but it goes then comes
back again. I dont have any warrenty on it, what should i do!?

Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836

Similar Messages

Hey guys. my macbook air wont get past the screen with the apple on it during start up. how do i fix this? i have a paper saved on my laptop on need to get at it. thanks guy!

hey guys. my macbook air wont get past the screen with the apple on it during start up. how do i fix this? i have a paper saved on my laptop on need to get at it. thanks guy!

Your boot drive is damaged in some way. If you have an original installation disc, you can boot from that and run Disk Utility. From DU you can select your internal hard drive ("Macintosh HD" is the name Apple puts on it - you may have renamed yours) and select "Verify Disk". If errors come up, try "Repair Disk". If it repairs, then you should be able to restart and boot from it. If it doesn't show up or won't repair, your drive is probably hosed.
Clinton

My computer froze so i manually restarted it. Since then, I haven't been able to proceed past the white loading screen with the grey apple on it. What should I do?

My computer froze so i manually restarted it. Since then, I haven't been able to proceed past the white loading screen with the grey apple on it. What should I do?

Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Just press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The RepairDisk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

My macbook air wont go past the apple screen with the loading circle.

My Macbook air (Early 2008 edition) Boots up fine, but it stays on the apple screen with the loading circle for a few minutes and then shuts down. I did the Command+v and it always stops at the same spot with:
disk0s2: I/0 error.
(see picture)
I have already tried pretty much all the commands while booting up possible, and to no avail.
Please help.

Sorry for delay been super busy at work - have you tried to boot to your operating sytem disc - by inserting the disc - then power down the unit - then power it up again while holding down the C key until you see the gear start spinning. Once it comes up - go to utilities at the top of the screen - then disc utility - then selcet your hard drive in the left hand pane and then on the right hand pane select first aid and click verify disk in the lower right hand corner - your hard drive may be failing and this test will let you know if that is the case. If so you need to backup your hard drive - replace it and put your data back on the newly placed drive. - please let me know how the verify disc goes

My Macbook wont turn on, it gets pasted the White Apple screen then goes to a Blue screen that quickly turns a slightly darker shade of blue with the familiar loading icon then back again and does this over and over. What should I do? please help!

So today my iPhone decides to go into recovery mode on me randomly so I plugged it into my Macbook right away, but it wasn't showing up in iTunes so I did a quick internet search as to why that could be. On the Mac support forum I found instructions stating I should make sure I had the current verison of iTunes on my computer, turns out I had been putting off an Update because I didn't like waiting for it to restart n so forth. So I clicked my boucning update friend at the bottom of my screen and it started checking for updates, the bar got maybe a quarter of the way up and then stopped moving all together, I thought something was wrong so I clicked cancel and tried again. The same thing happened so I clicked cancel and went back to the Internet to find more help on my problems. I found yet another forum saying this solution was simple, restart the computer. So i clicked my little apple at the top and pressed restart and that has been the last thing I got to do on my computer because when it restarted it got past the White Apple logo screen and went on to a Blue screen which quickly turned a darker shade and had the loading circle, then back to the previous blue screen, then right back to the darker one. This process it repeated several times and I can't for the life of me figure out what to do. Please someone have a simple answer to this that I haven't Already tried, I have already tried safe mode and it just doesn't work for me. Please please help I need my computer for class it has all my notes and a paper I was doing, not to mention my iphone is still in recovery mode, even when I can get to another computer to fix that I need all the back up files off of my macbook to restore it to what I know it as and not default.

Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data)

I accidently downloaded something that made my webcam flash on spuradically even once i deleted it. when i restarted my computer it got stuck at the white loading screen with the grey apple and wont go past there..what is wrong? will applecare cover this?

i accidently downloaded something that made my webcam flash on spuradically even once i deleted it. when i restarted my computer it got stuck at the white loading screen with the grey apple and wont go past there..what is wrong? will applecare cover this? my computer also slowed down drastically before it stopped working..thanks! HELP PLEASE!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery is separate from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. If you can't get to an Apple Store, go to another authorized service provider.

My macbook air won't get past the white apple screen. I've tried power cycling the batter but won't help

my macbook air won't get past the white apple screen. I've tried power cycling the batter but won't help

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

My iphone 6 wont go past the start up screen (white screen with black apple) iv treid restoring it on itunes but it disconects its self half way through

my iphone 6 wont go past the start up screen (white screen with black apple) iv treid restoring it on itunes but it disconects its self half way through. what can I do

Did you try to use recovery mode, explained in this article?
If you can't update or restore your iOS device
If it does not work after that, you'll have to get it serviced:
iPhone - Contact Support - Apple Support

I tried to download a trial version of creative suite 6 but it wont process past the buy now screen

I tried to download a trial version of creative suite 6 but it wont process past the buy now screen, what should I do?

As Manish said, we need more info. Also, if it wants you to buy the software and never even offers a trial mode, then there is probably nothing you can do. Either you already ran another trial and it has timed out or your licensing system is busted, but that being an unserilaized version, there's no way of fixing it.
Mylenium

My macbook pro wont get past the grey screen at startup. Help!!

After doing a run of the mill software update on my macbook pro (running snow leopard) it froze during the "moving items into place" stage. I forced a shut down and now it wont get past the grey screen with apple logo and spinning wheel. I have tried booting from the original DVD but it still freezes. When I boot it in verbose mode it seems to stop at "jnl: unknown-dev: update_fs_block: error reading fs block # 3597880! (ret 5)", the Apple AHCD Disk Queue manager :: set power state is timing out and there is a disk I/O error. I have tried to reset the power manager (not sure if it worked or not) and I have also tried clearing the PRAM (again, not sure of that worked). When I try to look at the hard drive using target mode on my imac the hard drive doesn't come up but the DVD does. I'm concerned that my hard drive is fried. Any suggestions?

It would help to state in your post which remedies you tried that didn't work.
Start here > OS X Lion: If you see a gray screen at startup
If nothing there helped, try Starting up in Safe Mode
Safe Mode deletes some system caches that may help.
A Safe Mode boot takes longer than a normal boot so be patient. Once you are in Safe Mode, click Restart from the Apple menu.
If a Safe Mode boot didn't work, since your Mac has OS X v10.7 installed, restart your Mac while holding down the Command + R keys so you can access OS X Recovery built in utilities. The startup disk may need repairing.
Tip: Hold down the Eject key while starting up your Mac to eject a disc.

MacBook won't go past the boot-up screen?

Okay, so I had about 3,008 of other peoples' pictures on my MacBook that I didn't want. I sent them all to the Trash in iPhoto to get rid of them. I then two-finger clicked on the Trash in iPhoto and told it to empty trash. It asked me if I was sure I wanted to delete all 3,008 photos and I clicked yes. (in retrospect, I should have clicked no.) After the program had sat doing nothing except turning my mouse pointer into a spinning rainbow-wheel for about 15 minutes, I decided something must be wrong. I two-finger clicked the iPhoto application in my dock to try and tell it to Force Quit, but it just froze. the application didn't even shrink back to normal when I pulled the mouse pointer away from it. My friend said to just turn it off and try turning it back on, and held the power button down so the computer shut off. I waited a few minutes, tried to turn it back on, and all I got was the boot up screen (white with the gray apple logo and a spinning wheel thing underneath it) for about five minutes and then it shut itself off. It has been doing this every time I've tried to turn it on since yesterday afternoon. PLEASE help me!!

I should also mention that I kind of just guessed on which operating system I'm running... I don't know, and I assume it's whatever they originally put on the MacBooks in 2008.

MacBook won't boot past the apple logo screen!

So my MacBook started freezing up and I went to restart it and it wouldn't boot past the grey logo screen with the spinning gear. Its pretty old and therefor still has the Leopard operating system. I've been trying to run Disk Repair using a Snow Leopard install disc but it just gets about 30% done and then doesn't go any further. Eventually I stopped the disk repair and just tried installing OSX but when it asks me what drive I want to install on there are no options available to click. I've got alot of unsaved work on this old thing and would love to get it running soon! Any help would be extremely appreciated! Thanks

I've been trying to run Disk Repair using a Snow Leopard install disc
Install discs are "machine specific" .. you can only use the install disc that came with the Mac for repairing the hard disk.
You may not have enough free space on the startup disk.
Follow the directions for starting up in Safe Mode
A Safe Mode boot can take a little longer then a normal boot so be patient.
When you see the Desktop, right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
If there isn't enough free space, help here > Freeing space on your Mac OS X startup disk
You can use Disk Utility to verify the startup disk from Safe Mode but you can't repair the disk. You will need the install disc that came with your MacBook for that. While you have Disk Utillity open check S.M.A.R.T. status at the bottom of the window. Make sure it says: Verified
When you are finished, click the Apple menu icon top left in the screen. From the drop down menu click Restart.
If you don't have the original install discs you may be able to request a replacement. You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.

My Macbook won't get past the start up screen

Hey everyone
I have a Macbook that's about 3 years old. I did an software update yesterday and since doing it the computer won't get past the start up screen. There's just the Apple logo and the rolling ball thing. It's been stuck there for around 30mins and nothing changes. I'm not really sure what has happened but I was wondering if there is any way I can fix it.
Thanks for your time.
Bevan

Hey Lyssa
I don't have a back up but I'm not to worried about that as it's my traveling computer and I only use it for the web and some word processing.
I don't have the disks with me right now as I'm away from home. I'm not sure what I had updated, I think there was a lot because I hadn't don't it in a long time.
If I can start it in safe mode what should I do?
Thanks.
Bevan

TS3931 I cannot get my Macbook air to move off the start up screen with the Apple logo and spinning gear. HELP!!!!

I cannot get my MacBook Air to move from the gray start up screen with the Apple logo and spinning gear. Please help

I cannot get my MacBook Air to move from the gray start up screen with the Apple logo and spinning gear. Please help

MacBook won't load past the white startup screen.

I'm going to start off by saying I'm a huge idiot.
My MacBook was being sluggish last night, so I (impatiently) force-turned it off. Whenever I turn it back on, I get stuck at the white screen for about 10 minutes and the Apple logo never loads. I must've made the harddrive corrupt by turning it off while it was doing some important background work.
Is there any way I can fix this? The data on there isn't important as I have my course work backed up, I just need it up and running for class tomorrow. Can I wipe the harddrive and do a clean install somehow?
Hopefully someone can help.
Edit: I managed to open Disc Utility with my Mac OS X 10.6 disc, and I can't even see my harddrive located anywhere.

Sorry for the double post, but I can no longer edit the main one.
I heard the most gut-wrenching sound when I held "Alt" to get to my partition, so I opened my MacBook up, removed the harddrive and reinserted it. I'm not sure if it was the harddrive that produced the noise, or the installation disc.
Now I can see my Harddrive located in Disk Utility
http://i.imgur.com/aQdBU.jpg
http://i.imgur.com/qR38u.jpg
After hitting Verify Disk I saw this:
http://i.imgur.com/vhRIt.jpg
So I hit repair and...
http://i.imgur.com/eBLNH.jpg
I try erase:
http://i.imgur.com/Tp8bA.jpg
And repair again:
http://i.imgur.com/jrM3x.jpg
I'm given so many errors, but they all point to the same conclusion...
My Harddrive is fried and I need to look for a replacement. Could anyone point me in the right direction? My Macbook is really old I've even forgotten the type! It's a Black MacBook from around 2006 or 7 is my best guess. What harddrive would fit?

My macbook air wont got past the white loading screen

Similar Messages

Maybe you are looking for