My Macbook are from 2012, and i can not get the Airplay to work. Apple-tv3

Hello,
I can not get the Airplay  work betwine my Macbook  and Airplay.
Have read a lot about it online, and can not understand way its-not work. My mac is from 2012. have dobbel Chek. Also with Serial number on our site.
Do you have any answer for way its not work?

Update to Mountain Lion, or higher, which is required.
Troubleshooting AirPlay

Similar Messages

  • I have photoshop elements 11 and I can not get the encoder to work

    I have photoshop elements 11 and when I put the code in for the encode to be activation .It keeps coming up with the code is not right.

    See if this helps any:
    http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  • I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen.  Does anyone have any suggestions?

    I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen.  Does anyone have any suggestions?

    Irelandbound wrote:
    thank you, I have the adaptors so glad that would work.  I just heard adaptors burn out often.  So Just thought for my main iMac computer, a plug would be best.  I will get one once I move.
    Any other suggestions or things I should know about apple products in Ireland.  I know there are no Apple stores there.
    An adaptor doesn't burn out. It merely serves as a means to connect the power prongs on your device to the power supply.
    I believe you are thinking of a transformer, which you do not need. A transformer converts one voltage to another.
    You don't need to do that as the power supply of modern electronics can take almost any worldwide voltage.
    Look at the label on the device. It should indicate the input power acceptable of 100-240 VAC, 50-60 Hz.
    Additionally, I found the adapters cheaper in the UK than I found them in the US. They were available in most supermarket chains. I wasn't in Ireland, so I can't say one way or the other.
    If you have something that doesn't have that input power spec, it would require a transformer.
    On other items like electric clocks or things with motors, you can connect them up to a transformer and the voltage will be correct, but the frequency may not. For clocks, that will cause them to not keep time well. For motors, they will burn out.

  • I am using my time capsule to back up and I can not get the green light, what should I do

    Hi everyone
    I posted a quesiton yesterday and when I got up this morning the time machine / capsule (not sure of the difference) had unlocked itself!. The other problem persists and that is that the amber light continues to flash and I can not get the macbook to talk to the time thingy.
    Obviously I am not very good at these things and I live in a country where I-systems knows about as much as I do!
    Thank you
    Gillian

    So you have never actually used the airport utility.. you were almost there.
    You posted this picture.
    Screen+Shot+2013-03-15+at+13.20.55.png
    Click edit button on that page.
    Voila.. airport utility in all its manual setting glory.
    Or install a decent utility.. 5.6.
    This is not required but to my eyes.. it is much easier to understand and has more useful tool items than later versions.. which are made iOS pretty picture like.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
    For screen shots see this post.
    https://discussions.apple.com/thread/4668746?tstart=0

  • I have just got a iPhone 4s and I can't get the iCloud to work, everytime I turn ato downloads it defaults back to off, can anyone help?

    I have just got a iPhone 4s and I can't get the iCloud to work, everytime I turn on auto downloads it defaults back to off, can anyone help?

    Welcome to the Apple Community.
    Check you are logged into your store account properly (settings > store). Also check there are no restrictions set that might be causing this (settings > general > restrictions)

  • I have recently upgraded to mountain lion and I can not get the calendar application to work. I con appears on the side put on calendars. Any suggestions

    I have recently upgrades to Mountain Lion and I can not get the calendar utility to come alive. Icon appears in the tast bar but the application does not launch or appear to be any where else. Any suggestion?

    Did you look in the Applications folder for Calendar? If it is there, remove the item that is in the Dock and replace it by dragging the Calendar application to the Dock.
    If it is not there, did you have iCal located somewhere other than the Applications folder when you upgraded?

  • I can not get the debugger to work on oracle studio 12.3 - It will not attach

    I can not get the debugger to work on oracle studio 12.3 - It will not attach

    APN for Tmobile is epc.tmobile.com
    MMSC is http://216.155.174.84/servlets/mms
    Here are the instructions:
    Create devel catalog (appl from this catalog can damage your phone but don't have to so if you are not sure about your needs or skills dont use it and wait for official applications from Nokia or firmware update) The software hosted in Extras-devel is NOT ready for normal users! PLEASE PLEASE PLEASE don't play with it unless you really know what you are doing. Be ready to file proper bug reports instead of posting complaints. Expected problems: crashes, battery drain, poor system performance, full disk space & more - SERIOUSLY! Don't play with Extras-devel if you haven't backed up your data or are prepared to re-flash your device.
    Application manager --> Application catalogs --> New
    Catalog name: Extras-devel
    Web address: http://repository.maemo.org/extras-devel
    Distribution: fremantle
    Components: free non-free
    Refresh catalogue
    Install fAPN and fMMS
    Run fAPN and create new APN with MMS setting which you can get from your operator or find on this page (this may not be needed for all users, see note below)
    Run fMMS and it will start with configuration
    Put APN name the same you named your MMS APN point during fAPN configuration
    Type MMSC which you can take from your operator
    Type your number starting with +
    Put max size of pics you want to have in outgoing MMS
    Save all and start sending MMS from fMMS menu.
    It is very important to put correct setting in new APN and be sure if there is proxy needed in your operator.
    WHEN YOU GO TO MMS to set your configuraions, the information should look like this
    MMSC: http://216.155.174.84/servlets/mms
    Resize Image: 300
    Your Phone Number: +##########
    NOW U ARE DONE!! =)

  • After update to OS4.2.1 I can not get the ringer to work for incoming calls

    after update to OS4.2.1 I can not get the ringer to work for incoming calls. If I set Vibrate on, that's the only notification I get. Tried everything including blowing away ALL my apps and restoring phone to new. Lost all my apps but the ringer still won't ring

    God Bless u! LOL I have an otterbox case on my phone and had no clue that the mute button was there....Thank you so much!! The volume on my movies & everything else worked...even when I would go into "settings" and adjust the volume of the ringtone. I knew it was something simple...Thanks again..

  • Help, please! i can not get the sound to work on my pc

    i can not get the sound to work on my pc

    Try opening the device manager and remove your sound hardware and then rediscover.  This works often.  Let me know how it goes.
    iGirlTech

  • I can not get the temperature to work.

    Howdy
      I just got my MSI FX 5900XT yesterday and it is running fine. However I can not get the temperature to show on it. I have tried everything I can find on the forums like the different registry hacks and such. And it still does not work.
    In the one program 3D Turbo when it is first starting up it looked like the temps are trying to work then they just shut off. It stats to lite up and stuff they just goes down.
    Anyone know of another program or something else that I can try to get it to work ?
    Again I have tried everything that I have found on these forums that people have suggested so do not say try that stuff.
    I know this card has a temp probe as the 5900XT cards from other companies works fine people tell me. So unless MSI done something and took it out it should be there and be able to work just fine.

    Quote
    Originally posted by The Black Wibble
    Every piece of information about the card is obtained through the device driver so I say it is a driver problem.  I'd uninstall the driver, remove all traces of msi/nvidia driver binaries and config files using drivercleaner.  Deleting all references in the registry to MSI or nvidia might help, too, before rebooting and installing nVidia's 53.03 drivers.
    Tony.
    I purchased the card also from newegg and i have yet to get the temp sensor to work. I read in one reveiw that the chip for that is not in this card. Also that the overclocking program from Msi should not be used. I have searched all over for some info on the dynamic overclock technology DOT .The only mention of it is on the motherboard overclocking but it looks like its part of the video driver ? I have had very poor results trying to overlclock this card. 3d clock 450 ram 730 locks up all the time . I also run a amd 2400
    [email protected] Let me know if im missing something on this card or not  but dont want the hazzel of returning it

  • I have a macbook (10.6.8) and I can not get facetime to work, anyone else having this problem?

    I have a macbook (year 2009) operating system 10.6.8... I can not get facetime (formerly called ichat...) to work? Anyone else having this problem/ know how to fix it?
    Thanks

    Update to FT 1.0.5 i had the same problem until i updated

  • Updated two computers and now can not get the serial number to work

    can not get Production Premium Suite serial number to work after up dating both of my computers. get invalid serial number error. both are running OS X 10.9.4.

    I am using version CS6, don't know support number. Did not deactivate because drive failed. put in new drive and it will not accept serial number. Same Mac Pro desk top just new hard drive.
    JIM PARKER
    <Removed by Moderator>

  • Hey i have a normal i phone 4 and have just done all the iTunes, macbook and iphone updates and i can not get the devices thing to come up in the tab on the left in iTunes. and i have done that itunes trouble shooting thing with no luck.. plz help

    i just cant get the devices thing to come up in the tab on the left. i am pretty sure everything is up to date and the phone is charging through the mac book usb port. i have also tried this link http://support.apple.com/kb/TS1591 that all the google searches take me to but it no help. i am not very good with computers so spastic easy language would be greatly appreciated, thanks in advance

    Welcome to the Apple Community.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
    Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
    In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
    In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > store, scroll down and tap your ID)
    If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

  • I have a 2008 MacBook.  Have been burning CD's and I can not get the last CD into computer. Acts like it is blocked or locked. How do I unlock it?

    I have a late 2008 MacBook and have burning some CD's.  It has been working just fine.  I tried to insert the last CD and can not insert it.  it acts like it is locked or blocked.  how can I get it to work again?  I have tried restarting it several times, tried restarting it while holding done the esc key and the pad key.  Nothing has worked so far.
    Any clues other than taking it in???

    Try pressing the Eject key  on your keyboard.

  • HT204291 i m CONNECTED TO THE SAME NETWORK  UPDATED ALL MY SOFTWARE AND I CAN NOT SEE THE AIRPLAY ICON

    what am i supposed to do?

    Ok, I had this problem until 5 minutes ago. What i did:
    1 - disable Wi-Fi
    2 - disable Bluetooth (that's the great villain)
    3 - enable Wi-Fi
    4 - Icon Appears, able to conect. If you need Bluetooth, after you conected to Apple TV, you can Enable again.
    On iPhone 4S are the same steps, turn off Wi-Fi, turn off bluetooth, reconect wifi, tap twice at home button, scroll to volume, and the airplay is there.
    Hope I help!

Maybe you are looking for