My macbook beeps on start up and the screen is grey with the apple logo
my mackbook beeps on start up and the screen is grey with the apple logo
Usually inside the battery compartment. Check your user manual for instructions on accessing the RAM slots. If you don't have the manual you can download a copy at support.apple.com/manuals/. You will need to know the actual model you have to get the correct manual for it.
Similar Messages
-
When i turn on my macbook a box appears telling me i need to restart my computer (in different languages) and in order to do so i have to press on the off button for a lil while. Even after doing this the same box appears and it never restarts correctly. This box appears every single time. I rarely turn my computer off. I just place it on sleep mode and restarts it only when i get prompted to. I brought it to genius and they couldnt figure out what the problem is so i was told it needed to be shipped to get fixed. I didnt have anything backed up. All i want saved are the pictures because i went to 2 events where i was the assigned photographer and i didnt get to save it to an external memory. Genius said that when shipped i cant give instructions like make sure to save the pictures and if they are unable to, call me if they should go on with the process. I was wishful thinking that to fix the problem they might not even have to touch the pictures memory part. I brought my MBP back home hoping it will miraculously starts and id be able to back it up but now all it does when i turn it on is the screen remains gray with the apple symbol and the circle timer below. The screen stays this way even if i leave it on for hours. Please help me fix this!!! cant i really specify to the technicians at apple to please make sure not to erase the pictures? Is there no other way to turn on my mac? I only need it to work ones.
There is no limit to the number of times you can re-install Office on the same computer.
You can activate by telephone:
The last paragraph is the relevant bit -
I start my mac book pro and the screen goes white with an apple in the middle
I start my mac book pro and the screen goes white with an apple in the middle. Starts like charging but then it turns
off againReinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
When I started my Mac the screen was white with the Apple logo and power motion icon running. I attempted to turn off Mac then a message stating "Debugger called: <Button SCI>. Also "Waiting for remote debugger connection." What is my next step?
Hi , and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
And sorry to report that OSX is more Widows like than ever, but….
If that doesn't help Reinstall the OS. -
Hey
I don't know if my mac book air is frozen, but the screen is gray with the apple logo in the middle of the gray screen, with the 'booting' icon turning round and round. I have switched it off fron both the power and power button on the computer, it goes off, when I put it on, same screen comes on again. Help Please!Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 3
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 4
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 5
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 6
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 7
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 8
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 9
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 10
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 11
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
My iphone5 was accidentally disconnected while updating OS8.2 in my MacBook Pro and now it's stuck with an apple logo on its screen and won't turn on or off. What should I do?
Connect to iTunes and restore. If you have difficulty, you may have to put the device into Recovery Mode. See the instructions in this support document. If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
-
i erased everything from my macbook and try to reinstall the MAC os x 10.4.9. but now when i restart my computer the screen is grey with a file folder marked with a "?" flashing. when the dics is already already inserted and i restart it, regardless if i hold down the "c" or "d" key with rebooting, the disc is automatically ejected and then it goes back to the grey screen with the flashing "? folder".
if i was to try and reinstall the "for mac computers" os x 10.5.4 the computer will load the disc and bring me to the language select menu but as soon as i click the "next" button it tells me that the software is not able to be installed on that computer.
i have no clue what to do. the computer was working COMPLETELY fine before i erased something.Yikes, what happens or shows if you hold the Option or alt key on bootup?
The 10.5.4 Disc at least sounds like a Gray Machine specific Disk, or wrong Partition Scheme!???
Does that one allow Disk Utility to run?
Did you Erase to GUID?
How to format your disks...
http://www.kenstone.net/fcp_homepage/partitioning_tiger.html
(To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
Thanks to Pondini, Formatting, Partitioning, Verifying, and Repairing Disks...
http://Pondini.org/OSX/DU.html -
My ipad is stuck inbetween on and off. The screen is black with the white apple in the middle of the screen. It won't turn off and won't come completely on. Anyone know what is wrong?
See if this lets the iPad start up.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Hi,
I have recently installed iTunes latest version (10.5.1.42) on Win XP SP3.
The problem is, when accessing iTunes, It connects to the internet, I can sign in (It shows my username in sign in bar), But nothing is shown in the iTunes store window in iTunes. It shows "accessing iTunes store..." for few seconds and after that its blank with an apple logo inside the status bar.
ANU SUGGESSION???Sorry, no. The screen image you see is specifically saying you need to connect it to a computer. You could take it to an Apple retailer for help.
-
I tried synching my phone to apply an update, but the screen has frozen with the itunes symbol. Is there a way I can unfreeze the screen, can anyone help please?
http://support.apple.com/kb/HT1808
-
Has anybody had a similar problem , after charging my iPhone 5s (with the Apple charger and cable ) , the screen on the phone has locked with the Apple Symbol , the phone will neither switch on or off for me to take any action , restore , upgrade etc
I think your iPhone must be stuck in Apple logo. If so, you need to read the help guide: iOS: Not responding or does not turn on - Apple Support
-
The grey screen flashing square with a question mark in the centre and nothing... Having disconnected all but still the same when reconnected
Hello Ariane,
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions. -
u there
Have you tried resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
Next connect it to your computer and try to restore the iPod via iTunes on your computer. -
My friend was sending a text with a pic as an attachment and then suddenly, she got a blank screen with the white apple logo and it then shut off. When she turned it back on, she discovered all her texts and her contacts were missing. How can she get them back? She's got a iOS 4.3.5 with a 16GB iPhone 4.
Connect to the computer she regularly syncs to, right click on the iPhone's name in iTunes, and choose "restore from backup".
-
Its been like that for hours. It's just an apple sign and a spinning wheel/ circle (not the pinwheel) I was updating mountain lion.
Step by Step to fix your Mac
Maybe you are looking for
-
How do you move an e mail to mailbox trash?
For the past week I have been unable to delete e mail from my iphone. When I attempt to do so as advised in the user's manual, a message pops up: "UNABLE TO MOVE MESSAGE. The message could not be moved to the mailbox Trash." I have been able to move
-
Pricing procedure in billing type
How can I change pricing procedure in billing type
-
Sap Support of Bex Analyzer 7.0
Hello everyone, Does anyone know until when SAP is going to do support for Bex Analyzer 7.0? Iu2019ve eared that is going to be discontinued. From now on does it make sense to use this tool in a new project or use Crystal Reports? What does BEx/Pione
-
Hi, I have created equipment BOM with only " L " category. For purchase some material from the order when i execute BOM through structure list (Tab) and select the material, by default " L" category system takes, and Item category field becomes gray
-
Stuck on checking for email on iOS 8.1 iPhone 4S The screen turns out white and nothing happens. Help!