My macbook camera's flash doesn't works

Hi everyone, have a question. Im really not sure if the "flash" which appear when i take a photo on, i dont know, in "Photo Boot" did not flash. I remember i could take photos with my room in dark and i looks "white" lol (because the light) but now, the same dark room, the only light which is hitting me is the screen one then when i took the photo i dont looks that "white". Im pretty sure i dont change nothing about the camera and im wondering whats happening with it.Any help will be nice, thanks!

Searching Photo Booth > Help for "Flash" shows you how to configure the Photo Booth 6 default to flash the screen by using this menu command:
You can change or override the defauilt as explained in the Turn off the Photo Booth countdown or flash Help article.
Message was edited by: EZ Jim
Mac OSX 10.9

Similar Messages

  • IPhone 4s glitches, is cracked, and camera flash doesn't work. What is the cost to exchange for a new one?

    Front screen of my iPhone 4s is cracked, it freezes/lags, camera flash doesn't work, and every time you press a bit harder on the front screen red and grey vertical lines appear. I have had it for more than a year now, so how much will it cost for me to replace it?

    These prices are for the U.S.
    Out-of-Warranty Service
    If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
    iPhone model          Out-of-Warranty Service
    iPhone 5          $229
    iPhone 4S          $199
    iPhone 4, iPhone 3GS,
    iPhone 3G, Original iPhone          $149
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax.
    When setting up out-of-warranty service, Apple will request credit card pre-authorization for the maximum service fee listed above.  This amount will be deducted from your credit limit. The final service fee we charge will be determined during testing and may be less than the service fee listed above.
    Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.
    Apple reserves the right to determine whether or not your iPhone is eligible for Out-of-Warranty service. iPhones that are repaired or replaced have a 90-day limited hardware warranty or assume the remainder of your standard warranty or AppleCare service contract coverage, whichever is longer. Please see Apple's Repair Terms And Conditions for further details.

  • I have a black iphone 5 and my flash doesn't work it used to work every once in a while but stopped

    I have a black iphone 5 and my flash doesn't work it used to work every once in a while but stopped I went into the camera app and tried to see if it would flash when I took a picture but I saw it light very faintly and hasn't done lot up since. Should I get the led replaced?

    First, try bringing up Control Center by swiping up from the bottom of the home screen.  Turn on the flashlight by tapping the icon in the lower left.  Does the flashlight work?  If not, perhaps you have a hardware issue.
    If it works, check the top of the screen when you open the Camera app to make sure you have the flash on.

  • Flash doesn't work and work with another browser!!

    ''locking as a duplicate of - https://support.mozilla.com/en-US/questions/900202''
    Flash doesn't work and work with another browser!!.
    The message is " An error occurred, please try again later" just with youtube. Other sites work. Another browser works with youtube!!

    Whay do you mean "difficult with the camer?"
    Two things that might help. Reset all your settings and reset the phone.  Use the Settings app to reset all settings. Settings > General > Reset > Reset All Settings  Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that helps.

  • IPhone 5 torch and flash doesn't work

    iPhone 5 torch and flash doesn't work? How can I activate?

    The flash is activated as follows:
    When you are in camera mode, and the camera is open about to take a photo, you will see an elliptical button in the upper left with a flash-like sign.  Press that button and you will find it has three settings: Auto, On, and Off.
    Choose one.
    I don't know what you mean by "torch".

  • Need to convert a AVI video to be able to see it on a MACBOOK Air. VLC doesn't work

    I need to convert a video from AVI format to a other format that can be read on my MacBook Air.
    VLC doesn't work. any other suggestion? Free will be better
    Thank you

    Is it a bad thing to put my MacBook Air 13" directly on my bed not raised on a flat surface?
    Yes, yes, and Yes
    Considerations for the long life of your Macbook Air. Handling and environmental care tips
    Don’t use your MacBook Air on the beadspread or pillow
    Do not place your MacBook on a pillow or other soft material when it's powered on, as the material can block the airflow vents (in particular, the rear vents) and cause the computer to overheat. Never place anything over your keyboard when operating in closed-lid (clamshell) mode. This can cause your computer to cycle on and off, which might create excessive heat and drain your battery. Use a lapdesk if you want or plan on using your Macbook on your bed or couch, or in your lap.
    Use of your notebook on a mattress or pillow blocks your notebook from circulating air as it needs to, and can lead to overheating rapidly
    Lap desk for use with your notebook on the bed, your lap, or couch. Also very useful for removing wrist strain

  • I have Iphone 4 it was work fine in my country (bahrain) i went to UK and i change sim card to O2 and when i came back it doesn't work in my country i think because i update the carrier in Uk its my carrier now 10.0 and the others in my country is 9.0

    I have Iphone 4 it was work fine in my country (bahrain) i went to UK and i change sim card to O2 and when i came back it doesn't work in my country i think because i update the carrier in Uk its my carrier now 10.0 and the others in my country is 9.0

    We had the same problem, but figure out the solution.
    You MUST have at least 1 song added to your ITUNE!  After you add a free song, then everything else should work as normal!
    Hope this helps!

  • When I click on a photo in Facebook app on iPhone 5 to save it to camera roll it doesn't work like it did in IOS 5.

    When I click on a photo in Facebook app on iPhone 5 to save it to camera roll it doesn't work like it did in IOS 5. Is there a way round this? It's do annoying.

    is youre using iOS 6 go to settings>facebook and turn camera/photos on

  • Lastest camera raw update doesn't work. Bridge no longer recognises my raw files.

    I'm using CS 6 and lastest camera raw update doesn't work. Bridge no longer recognises my raw files.

    Let's see if I can simplify it for you...are you using CS6 (yes, it seems), are you having ACR problems (yess it seems). So, do you want to fix your issues? Then read this (pay close attention to the details)...
    http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html
    It pretty much says you need to download a different version of ACR and install it (if it's not too diffucult for you to understand) to get ACR & Bridge to work properly...or not. Your choice...

  • Flash doesn't work suddenly [SOLVED]

    Today flash doesn't work anymore, I do not remember any modifications. In Firefox the browser segfaults after a few seconds of flash content. In Opera the flash area is replaced with weird graphics http://img294.imageshack.us/img294/5845 … 0x800s.png like this. I reinstalled flash10, no help. I installed flash9, no help, same problems.
    Also, gnash plugin works for most flash content, but not for youtube though (on youtube I'll just get a blueish empty screen). Viewing flash videos is a must for my PC use..
    EDIT:
    I discovered that my sound didn't work, and I remember removing dbus from my modules since somebody says HAL starts it.
    I solved it by adding dbus after hal in modules. I know that people say you shouldn't do that, and it creates this error text at bootup, but that did fix my sound, and my flash issues. Weird.
    Last edited by nawitus (2009-05-19 10:03:38)

    that didnt do the trick either.
    I decided to reinstall flashplugin, and then i noticed a warning that said "warning: directory permissions differ on usr/lib/mozilla. filesystem: 700 package: 755."
    should i just try to chmod /usr/lib/mozilla, and then reinstall Flash?
    EDIT: Yep, i just ran sudo chmod 755 /usr/lib/mozilla, and reinstalled flash. Works well
    Last edited by DisturbedFood (2011-03-17 20:52:35)

  • I have latest version of flash but flash doesn't work in safari!

    Why do I have latest version of flash but flash doesn't work in safari!I have flash for mac.Your help will be appreciated.

    If you're talking about using Flash on your iPod, you can't. There is no version of Flash that will work on any iOS device. If you're talking about using Flash on your computer, you may want to repost in the correct forum.

  • My Flash doesn't work on IE 8

    I am a webmaster with an existing flash on
    http://www.patriciawells.com
    No changes to the flash in about a year. Works great on IE 7,
    Firefox, Netscape, Opera, etc....
    Downloaded IE 8 Beta 2 this morning and the flash doesn't
    work.... Displays an x in the box (like a missing pix on an html
    page).
    Called Microsoft and they basically told me take a long walk
    off a short pier.... So much for them caring about how their beta
    works....
    Any suggestions would be appreciated.
    Thanks
    JohnJ

    RaleighPilot wrote:
    > I am a webmaster with an existing flash on
    http://www.patriciawells.com
    No
    > changes to the flash in about a year. Works great on IE
    7, Firefox, Netscape,
    > Opera, etc....
    >
    > Downloaded IE 8 Beta 2 this morning and the flash
    doesn't work.... Displays
    > an x in the box (like a missing pix on an html page).
    >
    > Called Microsoft and they basically told me take a long
    walk off a short
    > pier.... So much for them caring about how their beta
    works....
    Well, all your object embed tags are correct so it's
    obviously the Beta problem.
    Nothing can do about it.
    Best Regards
    Urami
    "Never play Leap-Frog with a Unicorn."
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • Hi, I have iPad 2 and iPhone 4S and I have a problem a camera problem it doesn't work when I try try to open it it reclose also I can't close my iPad with upper button and I can't restart

    Hi, I have iPad 2 and iPhone 4S and I have a problem a camera problem it doesn't work when I try try to open it it reclose also I can't close my iPad with upper button and I can't restart help me

    - Reset the iOS device. Nothing will be lost.
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

  • Flash doesn't work in Firefox 13

    Installed Firefox 13 yesterday. Now flash doesn't work. Have done all the supposed fixes to no avail. Have uninstalled and reinstalled flash. I'm at my wits end with this issue. I'm a web designer who uses flash in a number of my sites. VERY IRRITATING when my sites don't display properly. Anyone have a solution other than the pat Mozilla "fixes"?

    I received a PM from '''CheckMate''' about this thread. Since this is something that I think should be discussed openly I'll reply here.
    The ActiveX plugin (npmozax.dll) issue is now fixed via the Mozilla blocklist, which automatically disables it. For some background on the ActiveX plugin issue, see [https://support.mozilla.org/en-US/forums/contributors/708425 Blocking the old ActiveX plugin] in the contributor's forum thread.
    The Flash 11.3 Firefox protected mode problem is a separate issue and one related bug is [https://bugzilla.mozilla.org/show_bug.cgi?id=747683 747683] So, if you did have the ActiveX plugin installed and it is now disabled, AND you have Flash 11.3 installed, then the issue is no longer the ActiveX plugin.
    If the problem is Flash 11.3 protected mode (or other issues with Flash 11.3) it's not a good idea to suggest downgrading to 11.2.202.235. The reason why uninstalling Flash and going to a page that requires Flash installs an older version is because the Plugin Finder Service hasn't been updated yet! This is from http://kb.mozillazine.org/Flash#Installing_Flash_on_Windows <br>
    '''Quote:'''<br>
    ''If the Flash plugin is not installed and you visit a page that has Flash content that requires the plugin, the Plug-in Finder Service can download and install Flash for you (see [https://support.mozilla.org/kb/Installing+the+Flash+plugin Installing the Flash plugin (Firefox Support)] for more information). If you want to try this method and Flash is already installed, you can [http://kb.mozillazine.org/Flash#Uninstalling_Flash uninstall Flash] and then visit [http://www.adobe.com/software/flash/about/ Adobe's Flash test page] to launch the Plugin Finder Service ; however, it may offer you an outdated version.''
    The alternative (disabling Flash 11.3 protected mode by editing an obscure file) is not good either. I don't know what to suggest in those cases. I think it would be a good idea if you could bring this up in the SUMO Community Discussions forum. There's already a topic started on Flash 11.3 issues, here:
    *https://support.mozilla.org/en-US/forums/contributors/708430 Flash 11.3 issues (was: flash 11.3 released)
    Here is your original message, for reference:
    ''Hi, Alice- You locked the thread on the Adobe Flash Plugin update 11.300.257 not working question but you really shouldn't have for the following reasons. First, although I too found today that the Active X has been blocked as of June 7, the problem persists and the instruction is to contact the manufacturer. How about contacting Adobe and straightening this out on the Developer level instead of closing the thread because there's another temporary but much simpler solution that I found. Second, the instructions on how to disable Protected Mode are nuts. I'm pretty advanced, but my common sensed tells me this is too complicated to bother with and shouldn't be necessary and you yourself say this isn't a permanent fix. Third, I found a much simpler solution, at least until this bug is fixed. Completely uninstall the Plugin from the Add and Remove Programs list. Then, when you try to access any video on YouTube which uses the Plugin, Firefox reports that it needs an additional Plugin to play the video (look specifically for the FF blue plugin icon). When you click on it, it automatically downloads the PREVIOUS VERSION, 11.2.202.235 which works perfectly. But if you click on the warning below it that Adobe Flash is needed, the buggy 11.3.300.257 version will be installed again! This has to be fixed by the Developers. Until it is, the fix is simply to roll back the faulty update, which could have also been done with a restore point but I wanted to find the cause. FF apparently knows automatically that this plugin is faulty and installs the previous version, but the other instruction is contradictory and installs the 11.3.300.257 Nice!?!? ''

  • Camera app (back + flash) doesn't work

    Hey to all of you,
    for one day now my back camera doesn't work anymore. The screen is just black. The front camera works normally. I couldn't choose the flash light app either in the swipe up menue. I just updatet my software to the newest one. The phone didn't fall down or anything similar.
    Is there anything you can help me with? Thanks in advance for your help. I miss the camera already!
    Kind regards,
    Julius
    Message was edited by: Jules05

    FIX FOR REAR CAMERA AND FLASHLIGHT!!!
    I also had the same flash and rear camera problems as everyone else but I figured it was a software problem.
    To fix the flash/flashlight, simply download the flashlight app. The one everyone used before iOS 7. The flash should work immediately.
    To fix the rear camera go to Settings > General > Restrictions. Enable restrictions and turn the Camera off, then take the restriction off. Check your camera, it should work immediately.
    Hope this answers a lot of questions and saves a bunch of money due to Apple's failures.
    Cheers,
    Tim

Maybe you are looking for

  • When I borrow a firewire cord, my iPod doesn't work

    I was wondering if anyone else had to borrow a firewire cord and it won't work. I am not sure if it is a PC/Mac thing but I was wondering if anyone else had this issue?

  • Still problems with libstdc++

    I have played around with some binary packages lately wich won't run. I have these problems with JBuilderX and AC3D. I get these errors: ./jbuilder: relocation error: ./jbuilder: undefined symbol: __tic ./ac3d: relocation error: ./ac3d: undefined sym

  • "uid" vs. "cn" in OAM

    Hi, I think that there may be something wrong in my (initial) test OAM installation. I am using SunONE Directory Server as my OAM repository. When I use User Manager to create a new user, the new user appears (in the ou=People,...), but the user entr

  • Getting Total Order Cost for each order

    I have a fact table, order lines. There are two dimension tables, customer & Product. For each order i want to display on a pivot table: - the cost of the line. -the cost of the total order.  Is this possible? I have been playing with ALL & All excep

  • [SOLVED]What is wrong with this invocation of prename?

    Hi I've got a bunch of files with numbers in the name. I want to rename the ones numbered 1 - 9 to add a leading zero, so they sort correctly lexicographically. I used $1 to back-reference the digit, but it didn't work and I don't know why: [~] prena