My macbook can't load java

I am surprised to find out that all of a sudden the applet (java) can't load properly.
Before today, 31 July, I was able to use any website that require java platform and the applet doesn't have any problem loading.  For example, I could go to a bank's website to do internet banking and transfer.  Today, I couldn't.
I've tried many methods that I've come across in the web community but nothing is helping.
Please help!
Julia
PS: My Macbook's on Lion OS and my iMac on Snow Leopard... both can't load the applet / Java platform.

The latest drivers here:
http://support.apple.com/kb/DL1398
The new driver is 9.04

Similar Messages

  • Can't load Java applets in Safari

    Ever since I installed Snow Leopard, Safari can't load Java applets. I get a blue Lego brick with a question mark, and a message telling me that Java was not found.
    Firefox is unaffected, and I get the same error whether Safari is open in 32-bit or 64-bit mode. Programs written in Java, such as Vuze, are unaffected.

    Create another admin user account log into it, and see if the problem persists. If not, the issue's within the original account, usually amongst preference (plist) files. If so, then it's system-wide and reinstalling the 10.6.2 COMBO update, repairing permissions, and restarting should do the trick.

  • Can't load "java pulse" on gemplus-card but "HelloWorld"

    Hi.
    configuration
    Reader/Writer : GemPC Twin (USB)
    Tool : GemXplore Admin
    Card : Gemplus card
    Cardlet : Helloworld, JavaPulse (from java.sun site)
    I can load "HelloWorld" applet by changing to "HelloWorld.jar" from "HelloWorld.cap"
    I'm still not able to understand why I should change ".cap" to ".jar".
    But, anyway loading of "HelloWorld" on Gem+ card was done.
    The problem is that I can't load "JavaPulse" applet on gem+ card by what I've done for "HelloWorld".
    The Compiling, converting, changing to ".jar" from ".cap" was done in same way such as "HelloWorld"
    The error message is "69 85" (condition of use not satisfied)
    For some detail understanding,
    the steps (SELECT, INITIALIZE UPDATE, EXTERNAL AUTHENTICATE, INSTALL FOR LOAD) are done well but the "LOAD" step is failed at all.
    I hope you to have a good idea for resolving this problem. Thanx.
    Jade.

    Go to this link
    http://www.webct.com/tuneup
    and run what they call a browser tuneup. Looks like they will tell you what you need to know. Safari is supported, depending on what part of WebCT you need.

  • Can i load java onto my ipad2 to play online games?

    Can I download java onto my ipad2 to play online games thru wi fi?

    What a shame I was hoping..I thought if u could get onto the internet you would be able to play their games just like a PC.....thanks for your help.....much appreciated...
    Thanks again

  • Samsung X495 cell T-mobile SIM can't load java midlets...

    Have spent $120 on h'ware & s'ware, plus an eternity of minutes on hold, & can't seem to download jar/jad files to this %^$# phone - don't know if it's T-Mobile's fault (they DO block access to WAP sites) of some deficiency in either the phone or my technique. Using Softick PPP & Samsung's loader.exe - looks good, but fails to load...
    Any help would be appreciated...
    [email protected]

    I am looking to do the same thing, I am looking for the java sim card as well, not just a reader. Let me know if you find any answers

  • Can I  load Java classes generated by the Web Service Proxy Wizard?

    Hi gurus,
    I am very new to Oracle JDeveloper and I have mainly used it to create and debug PL/SQL procedures. My client app is written in PowerBuilder 11 (Sybase), which claims that it will create a datawindow from a web service. Well, it turned out that PB can only handle simple stuff (it works with a very simple wsdl from the internet) but can't handle more complex ones that we need to use. So I am thinking about using JDev to create the web service proxy for the web service and then load it into Oracle as a Java stored procedure so that PowerBuilder can call the procedure. JDev succsfully generated the proxy and a few Java classes. My question is, do I need to load all the classes into the database? If yes, will the reference to the package work? For example, in a JDev generated class (the soap client class), it has package MyJdev.proxy; at the top. Or, will it work if I load all the classes included in package /MyJdev/proxy into the database?
    Thank you very much for any help.
    Ben

    Thanks again, Bruce.
    What I meant by SOAPElement is that one genereated Java class has this and this class also has the setter for this like this,
    public void setSelection(javax.xml.soap.SOAPElement selection) {
    this.selection = selection;
    And here is the whole class,
    public class CaseSearchByPartyRequest implements java.io.Serializable {
    protected java.lang.String schemaVersion;
    protected java.util.Calendar messageProducedDateTime;
    protected javax.xml.soap.SOAPElement selection;
    protected Restriction restriction;
    public CaseSearchByPartyRequest() {
    public java.lang.String getSchemaVersion() {
    return schemaVersion;
    public void setSchemaVersion(java.lang.String schemaVersion) {
    this.schemaVersion = schemaVersion;
    public java.util.Calendar getMessageProducedDateTime() {
    return messageProducedDateTime;
    public void setMessageProducedDateTime(java.util.Calendar messageProducedDateTime) {
    this.messageProducedDateTime = messageProducedDateTime;
    public javax.xml.soap.SOAPElement getSelection() {
    return selection;
    public void setSelection(javax.xml.soap.SOAPElement selection) {
    this.selection = selection;
    public Restriction getRestriction() {
    return restriction;
    public void setRestriction(Restriction restriction) {
    this.restriction = restriction;
    this.selection is the request that I think I need. And here is the static main method of the soap client class genereated.
    public static void main(String[] args) {
    try {
    MyJdev.proxy.SoapClient myPort = new MyJdev.proxy.SoapClient();
    System.out.println("calling " + myPort.getEndpoint());
    // Add your own code here
    } catch (Exception ex) {
    ex.printStackTrace();
    So, if I need to send the request to the web service, do I need to create the request, correct? I have done it through AQ and Messaging Gateway and works fine by manually creating the request xml in PL/SQL, but now I need to get it to work sychronously from the UI. I believe that I need the request (SOAPElement) because that is the only way that I can supply the parameters. I have not see any setters for the parameters other than some setters for user name and password.
    Did I get something wrong here? If I don't supply the "selection", will JDev do it?
    Thanks.
    Ben

  • Macbook can't load one website

    I have two computers on a wireless network in my home. One Macbook and the other a Dell.
    I have a DSL connection through a Westell D90-327W15-06 wireless modem/router.
    Recently, the Macbook only cannot connect to www.billboard.com
    The Dell can connect to this site. I have reset Safari and reinstalled Firefox on the Macbook, but still no luck. Does anyone have any ideas why this might be happening?
    Thanks for any help!

    I just discovered that I am able to load the site from another network in my apt building. I guess that means it has to do my my router/modem config. I never changed anything and it's always worked until now. Would anyone have any ideas?
    Thanks again.

  • Can't load java applet? help please?

    I am trying to load a java applet after an upgrade - but security settings are blocking it - please help

    Java is no longer supported on Mac OS X 10.6.    The security of Java has been found to be so bad, you are lucky to get any Apps that work wtih it.    You need a minimum of Mac OS X 10.7.3 to run the latest Java applets and that using Java from http://www.java.com/  See the user tip here to optimize Java under 10.6.8
    https://discussions.apple.com/docs/DOC-5532

  • Can't load java on my mac air book

    Has anyone else had a problem loading the Java app onto the mac airbook?  I need it to use a budget system and have done the software updates and downloaded the app and it still say that I need to load it.  Help please????

    You shouldn't need to download anything for Mac OS X as it ships with Java2 inbuilt. Install the developer tools that came with your OS X disc (assuming you want to use this environment to write your code) and away you go.
    http://www.apple.com/java/

  • Load java liabrary in to data base

    Hi Friends,
    How can i load java liabrary in to data base.
    Please tell me step by step Because i am useing java 1st time .
    Please tell me how to run java code in to apex.
    List of file i need to run java code in apex
    Thanks

    Hi,
    if you are new, start reading the Java manual for the database: [url http://download.oracle.com/docs/cd/E11882_01/java.112/e10588/toc.htm] Oracle Database Java Developers Guide . It will give you the basics and more.
    Herald ten Dam
    http://htendam.wordpress.com

  • Load java class into the database 10g

    Hi ,
    We have a program which creates pdf files by using bi publisher.for this program we r using some java package to create a directory in unix whenever invoiceprint program runs.
    Now i need to load this class into database,so how can i load this class into database.
    I got some samples and docs from google but i was confused with those wether i should load from Oracle/applmgr user.
    So Could any one please tell me how can i load java class into oracle database.
    I am verymuch thankful for your kind help.Its an emergency issue for me.
    Thanks,
    YMR

    Hi,
    http://www.oracle-training.cc/teas_elite_util9.htm
    SS

  • I am running 10.5.8, and just updated my java to java 5 update10. Now my firefox is missing the Java plugin, and I can't load any Java applet at all. When I try it with Safari, it hangs when certain Java applet loads. HELP!!!

    Suddenly my Java plugin is missing and i can't load any Java with Firefox at all, even though i have it enabled in the browser! i've tried loading in java embedding plugin, but it doesn't work. what should i do???

    It's not in Tools> Add-ons >plugins?  Should be Java Plug-in 2 for NPAPI browsers 13.5.0. What are you seeing there? I don't think it's called the embedding plugin any longer.
    Might try getting the Firefox 5 standalone application. Trash the current one and replace it. Doing this won't affect your Profile or any settings.
    http://www.mozilla.com/en-US/firefox/all.html
    If it's enabled, how can it be missing?
    If this doesn't work, ask here. No need to register. Make sure you put (Mac) in the title.
    http://forums.mozillazine.org/viewforum.php?f=38
    Message was edited by: WZZZ
    EDIT. Oops, may be different for 10.5.8. Was thinking recent Java update for 10.6. But try installing a new app anyway. In the past, this got me the latest Java plugin.

  • Can't load App Store on my macBook Pro.  Error is; You cannont open the application "App Store" because it is not supported on this system.  How can I upgrade App Store or download new version?

    Can't load App Store on my macBook Pro.  Error is; You cannont open the application "App Store" because it is not supported on this system.  How can I upgrade App Store or download new version?

    Problem now resolved as I upgraded to Snow Leopard 10.6.  Seems App Store doesn't like anything previous to 10.6.

  • I just bought a new Macbook Pro and loaded all my info from My old Macbook...now i can't remember for the life of me my Admin Password 9which i created 3 years ago)...is there ANY WAY to bypass this on my new Macbook Pro and begin again...?

    i just bought a new Macbook Pro and loaded all my info from My old Macbook...now i can't remember for the life of me my Admin Password (which i created 3 years ago)...is there ANY WAY to bypass this on my new Macbook Pro and begin again...?

    I assume that you don't have the installation discs, so:
    1. Reboot
    2. Hold command + s key down after you hear the chime.
    3. When you get a text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
    (Type these commands very carefully)
    mount -uw /
    rm /var/db/.AppleSetupDone
    shutdown -h now
    4. You will go through the setup process again, create a new admin account, login to it and then change your existing account password or whatever else you need to do. You can delete the account you made in this process, or not.

  • HT1338 Help I can't get Java to down load to my Mac version 3.06 I have did the soft ware up date ?

    Help I can't get Java to down load !

    Hello BROitsJAMIE,
    Thanks for using Apple Support Communities.
    I'd like you to please follow the troubleshooting in the article linked to below in order to resolve this issue with your Mail.
    OS X Mail: Troubleshooting sending and receiving email messages
    Take care,
    Alex H.

Maybe you are looking for