My macbook cannot detect the TI Nspire CX

Good morning.
Recently I've bought the Ti Nspire CX(graphic calculator). When it arrived at my home I've decide to connect Nspire to macbook pro(mid 2014) by Ti Nspire Computer Link. The very disappointing fact is that the software cannot detect any device. I'm using the USB cable which was added to a pocket. Could you help me? I wonder if that problem concern a calculator or computer.
Regards.

The AirPort Express I am using was used previously at my mom's house. I was able to configure it I think. I used the ethernet cord and plugged one end into my macbook and the other into the airport. It then came up in my airport utility and it was the same name and password when it was used previously. But when I unplugged the cord from my mac and into the cable modem the airport express would only flash a amber light and not a solid green one. Where should I go from here.
I am new to macs so please as much detail as possible
Thanks

Similar Messages

  • Old MacBook Pro boots no further than the apple image and the ball spins aimlessly as if it cannot detect the hard drive

    My old MacBook Pro displays the apple image on start up then hangs with the ball spinning continuously. Seems it cannot detect the hard drive. Can I start up holding down certain keys to bypass the problem. Running snow leopard and don't have a start up disk.

    Try the procedures in this support article;
    http://support.apple.com/kb/TS2570
    You may also use the original install disk.  When you get to the point where the menu bar shows on top of the display, select Utilities.  The open Disk Utility from the drop down menu and try to repair the disk.
    Ciao.

  • Need help .. 4g usb modem .. application installed but cannot detect the usb modem .. mobily network interface installed but cannot detect the unit

    need help .. 4g usb modem .. application installed but cannot detect the usb modem .. mobily network interface installed but cannot detect the unit

    When you contacted the modem manufaturer what did they have to say?

  • Error: Recover-RecoverableItem : DPM cannot detect the volume

    Hi,
    We are currently extracting SQL backups from a secondary DPM server to copy to another device for long term archiving.
    We are doing this with a powershell script.
    We get this error message: Recover-RecoverableItem : DPM cannot detect the volume E:\ on SERVERNAME. (ID: 31085)
    Here's the script:
    Add-PSSnapin Microsoft.DataProtectionManager.PowerShell
    Add-Type -Path "C:\Program Files\Microsoft DPM\DPM\bin\Microsoft.Internal.EnterpriseStorage.Dls.UI.ObjectModel.SQL.dll"
    $pg = get-protectiongroup –dpmservername SERVERNAME | where {$_.FriendlyName -eq "SQLSERVERS"}
    $ds = get-datasource –protectiongroup $pg
    $i = 0
    $RestorePath = "D:\restore"
    $DPMServerName = "SERVERNAME"
    $rp= @(get-recoverypoint –datasource $ds[$i] | sort -Property RepresentedPointInTime -Descending);
    $rp_to_restore=$rp[0];
    $rop = New-RecoveryOption -SQL -Targetserver $DPMServerName -Recoverylocation CopyToFolder -RecoveryType Restore -TargetLocation $RestorePath
    $RestoreJob = Recover-RecoverableItem -RecoverableItem $rp_to_restore -RecoveryOption $rop
    Disconnect-DPMServer -DPMServerName $DPMServerName
    exit

    Hello,
    Same problem here, DPM cannot detect the volume I:\ on server xxxxx (ID: 31085)
    I've noticed, that the problem is appearing while trying to recover to my usb hdd, while is does recover to internal hdd normally. Some days ago it used to work fine with usb disk too. I don't know what happened.
    Any help please???

  • WLC cannot detect the CAPWAP 3602E

    Hi Guys,
    We setup some new CAPWAP AP 3602E in the network and configure the DHCP server option 43 , but the WLCs still cannot detect the APs , Do you know if there any new way to troubleshooting?
    WLC: 5508  version: 7.2.103.0
    SW:3750E
    AP: AIR-CAP3602E-C-K9

    *Jan 20 06:41:20.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Removing de
    fault route for existing gateway 10.x.x.x
    *Jan 20 06:41:20.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Adding defa
    ult route for gateway 10.x.x.x
    *Jan 20 06:41:20.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway  - gateway fo
    und 10.x.x.x
    *Jan 20 06:41:30.783: %CAPWAP-3-EVENTLOG: Could not discover any MWAR.
    *Jan 20 06:41:30.783: %CAPWAP-3-EVENTLOG: Starting Discovery. Initializing disco
    very latency in discovery responses.
    *Jan 20 06:41:30.783: %CAPWAP-3-EVENTLOG: CAPWAP State: Discovery.
    *Jan 20 06:41:30.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Removing de
    fault route for existing gateway 10.x.x.x
    *Jan 20 06:41:30.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Adding defa
    ult route for gateway 10.x.x.x
    *Jan 20 06:41:30.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway  - gateway fo
    und 10.x.x.x
    *Jan 20 06:41:30.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Removing de
    fault route for existing gateway 10.x.x.x
    *Jan 20 06:41:30.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Adding defa
    ult route for gateway 10.x.x.x
    *Jan 20 06:41:30.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway  - gateway fo
    und 10.x.x.x
    *Jan 20 06:41:40.783: %CAPWAP-3-EVENTLOG: Could not discover any MWAR.
    *Jan 20 06:41:40.783: %CAPWAP-3-EVENTLOG: Starting Discovery. Initializing disco
    very latency in discovery responses.
    *Jan 20 06:41:40.783: %CAPWAP-3-EVENTLOG: CAPWAP State: Discovery.
    *Jan 20 06:41:40.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Removing de
    fault route for existing gateway 10.x.x.x
    *Jan 20 06:41:40.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Adding defa
    ult route for gateway 10.x.x.x
    *Jan 20 06:41:40.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway  - gateway fo
    und 10.x.x.x
    *Jan 20 06:41:40.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Removing de
    fault route for existing gateway 10.x.x.x
    *Jan 20 06:41:40.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Adding defa
    ult route for gateway 10.x.x.x
    *Jan 20 06:41:40.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway  - gateway fo
    und 10.x.x.x
    *Jan 20 06:41:50.783: %CAPWAP-3-EVENTLOG: Could not discover any MWAR.
    *Jan 20 06:41:50.783: %CAPWAP-3-EVENTLOG: Starting Discovery. Initializing disco
    very latency in discovery responses.

  • Cannot detect the Airport network

    Hi: Suddenly my Ti G4 cannot detect the airport basestation as my other computers can. Sometimes the airport signal is detected and after some time it disappears. I've tried to use the airport utilities from this computer and cannot detect the network. I removed the botom cover of my computer, and all connections seems to be OK. Checking the apple system profiler, shows the card installed but no network available. Is there any test to check if the card is broken? Is there something else to check?

    Ditto on Henry's advice about swapping cards. My PB was having some intermittent problems with a new AEBS I bought. Then I was in Boston and the PB wireless was flaky. It would have a full signal, then drop instantly to zero, then come right back. Since there was an Apple store within 2 blocks, I went down there to troubleshoot. Interestingly, the Apple Store connection was perfect. But the tech swapped out my card and tested the old one. He said it was "starting" to go bad and suggested I get a new one. I did, and the hotel connection was fine. I sold my old card to another mac guy and it's been working perfectly with his home system.
    Now a year later I'm in CA and the hotel wireless was flaky. Exact same symptoms. I had my electronics screwdrivers along (don't ask), so opened the case and checked all connections. Then I drove over to the Burlingame store and had no problems getting on their network.
    I now think it's really a problem with the Hilton Family Hotels wireless routers. The cards seem to work perfectly elsewhere. Don't know why my home system was bad. So long story short, go bribe your local genius (if possible) and get them to check your card.
    So long story

  • WRT54G cannot detect the internet!!!

    I HAVE A WRT54G AND FOR SOME REASON IN CANNOT DETECT THE INTERNET. I HAVE A DSL MODEM AND IT WORKS PERFECTLY I'M ON IT RIGHT NOW. ALL THE DSL AND ROUTER LIGHTS ARE ON. I'VE USED THE ROUTER BEFORE. I'VE TRIED RESETTING THE ROUTER, I'VE TRIED POWERING OFF BOTH THE ROUTER AND DSL. NOTHING AT ALL WORKS. I EVEN TRIED CALLING LINKSYS BUT THEY WANT ME TO PAY FOR THEM TO FIX THIS PROBLEM AND I AM NOT WILLING TO DO THAT BECAUSE THIS PROBLEM HAS BEFORE AND THEY FIXED IT OVER THE PHONE I HAVE NO CLUE HOW.

    As you mentioned, your Internet Service Providor is DSL you may follow the link here to re-configure your router...

  • Hp scan applicatio​n cannot detect the OCR software

    Since I converted to Windows 8.1 I am unable to scan the document to my computer from the printers control panel, only from the HP software.   When I attempt to scan from the control panel I receive an error "hp scan application cannot detect the OCR software check the computer screen for more details" but nothing pops up.   Is there a fix?

    Hello there! Welcome to the forums @SJChamber !
    I saw your post about how you are now seeing a message stating "hp scan application cannot detect the OCR software check the computer screen for more details", when attempting to scan to your Windows 8.1 system.
    I will try to help!
    I am thinking that the full feature software may not be fully installed on your system, as the OCR software is included in the software.
    In having said that, try downloading the full driver and run through the installation here:
    HP Officejet Full Feature Software and Driver
    Try scanning from the printer software afterwards, and also try a scan from the front panel of your printer.
    Let me know the results!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • My iMac cannot detect the Hard Disk

    Hi, i've got a question...
    Something is wrong with my new iMac. Somedays (only somedays) my iMac cannot detect the hard disk, so when I startup it stops on the initial screen (whit a gray "apple" and background). I tryed to startup it with OSX system discs but the installation app and disk utility don't detect any Hard Disk.
    At an authorized store have said to me that can be a software problem...
    Is that true? I thought that was a hardware problem.
    Thanx,
    Eneko
    iMac 17"/2.0GHz Intel Core 2 Duo/1GB 667 DDR2 SDRAM/160GB Serial ATA   Mac OS X (10.4.8)  

    Given the young age of you machine I believe you should be taking Apple to task on this one. I'd advise you back-up your data to multiple locations before you go any further. 
    mrtotes

  • The air app cannot detect the new added camera

    i made a desktop air-app. the problem is when i unpluged my usb camera and start the air app . the app detect the existed cameras with Camera.names.length = 2; and then i pluged another usb camera and use the Camera.names.length to detect the new camera, but the result is still 2 , not the 2 existed camera with the new added one which the total is 3. then i close the air-app and start it again ,this time the camera.names.length is 3. why ? the air-app just cannot detect the new added camera? the only way the air-app can detect the new added camera is restart the app?

    Air ow flash player for that matter won't detect camera added at runtime. It will detect if you remove the camera while you were capturing images from the camera. You can try to scan for camera suing a timer and see if it detects it then.
    There is also a not so documented flash.media.scanHardware() method, which should force a hardware scan. I did not used it yet so can't vouch for it.

  • Macbook Pro Retina (late 2013) & 10.10.1 cannot detect the external monitor is turned off

    I connect my MBPr (late 2013) to a 24" Dell monitor via HDMI using a high quality audioquest hdmi cable.
    When I turn off my Dell monitor, the MBPr did not detect the monitor is being turned off.
    Let's say I opened a chrome browser and I move it to the external monitor.   If I turn off my Dell monitor now, the chrome browser will not automatically move back to the MBPr screen.
    I have the same scenario if I just power on my MBPr now and not power on the Dell monitor.   I will do this if I need to do some small stuff (like typing this post) int he middle of night and I don't want to turn on my Dell monitor.
    I am not sure if this is a problem or this is a normal behaviour of the MBPr.  I was like this when I was on Mavericks.
    PS. If I connect my Lenovo laptop to the same monitor and I turn off my monitor, the opened applications will go back to the Lenovo screen.

    The hardware supports DP1.2 and MST but unfortunately at present OS X Mavericks does not.

  • My MacBook cannot detect my AirPort Express

    My AirPort Express is plugged into the outlet, it has the ethernet cable plugged in and a solid green light is on.
    When I go into Airport Utility and it scans it says that it cannot detect any devices.
    I am not out of range it is in an outlet right beside the couch I am sitting on.
    There is nothing near by which could be interfering with it.
    I have already tried resetting my modem, my computer and the Airport itself but I still get the same thing each time

    The AirPort Express I am using was used previously at my mom's house. I was able to configure it I think. I used the ethernet cord and plugged one end into my macbook and the other into the airport. It then came up in my airport utility and it was the same name and password when it was used previously. But when I unplugged the cord from my mac and into the cable modem the airport express would only flash a amber light and not a solid green one. Where should I go from here.
    I am new to macs so please as much detail as possible
    Thanks

  • Macbook cannot detect D-Link DWM-156(A7) USB modem after upgrading to OS X Yosemite ver 10.10

    Hi
    My MacBook Pro 13" is unable to detect D-Link DWM-156(A7) USB modem once I open the D-Link Connection Manager app (to connect to the internet) even though the USB is plugged in.
    The MacBook is able to detect the USB at first, but once after I open the D-Link Connection Manger, it can no longer detect the USB Modem and a notification which says "No USB Modem Connected" pops up.
    This problem only surfaced after I upgraded the Macbook to OS X Yosemite ver 10.10. I tried to solve the problem by restarting the Mac but the same problem still arise.
    What do i do?
    Thanks in advance.
    Regards

    I figured it out!
    I had the same problem with the dongle sent to me by Telkom South Africa.
    Mine was D-Link Model: DWM-157. Here's how I fixed it.
    I basically flashed or updated the firmware on the dongle to the latest one I got from the D-Link website.
    1. You need access to a PC (Windows computer).
    2. Go to: http://www.dlink.com/uk/en/support/product/dwm-157-3g-hspa-plus-usb-adapter
    3. Scroll down and download firmware version 4.5.4.7
    4. Once download is complete, move over to your windows PC. Plug in the D-Link USB dongle.
    5. Run the firmware update on the Windows PC while the USB Dongle is plugged, Follow the prompts, it takes a little while, sometimes it seems like it is stuck but be patient. Once its done it will ask you to press any key to continue.
    6. After the install, pull out the dongle and plug it back in, sometimes the device installation prompt will appear. If so, rerun the device installation again. Wait for all the drivers to install. If not open d-link connection manager on your windows PC and test if it is able to make a connection to the internet. If the test was successful go to #7 below.
    7. Go to your Mac. Uninstall the current D-Link connection manager your have.
    8. Plug the USB Dongle back, the installation prompt will pop up again.
    9. Go through the installation steps and a prompt will pop up asking you to restart, restart your machine.
    10. Run D-Link connection manager and you can now get to the connection screen. Wait a while for network to be found.
    11. Click connect.
    12. Come back here and tell us if this worked for you. It certainly worked for me.

  • HT1846 windows 7 cannot detect the wi-fi or wirless signal

    Anyone can help me out? I've just install the bootcamp on my Macbook Pro 15" with Lion OS, Windows 7 ultimate 64, the program cannot find the wirless signal, is there any trick that I missed?

    Wrong section, oops

  • Computer cannot detect the camera.

    I have had a Powershot A590, and could connect it to my HP, but now when I try to download images the computer says it cannot detect my camera.
    Solved!
    Go to Solution.

    Hi Katyboy,
    Is your notebook connected to AC power?  If not, please do connect it.  This will ensure it is adequately powered so it can properly work with the camera.
    Do you have any other devices connected to your notebook?  We only recommend, at least as a test this time, connecting the camera to the notebook.  Other devices, such as printers, scanners and external drives may interfere with proper communication.
    Does your notebook make a sound when the camera is connected and powered on in playback?  It should make a sound, indicating that it at least detects the camera.  If it does not, try connecting it to another USB port.
    What program are you using to attempt to download the images from the camera?
    If this is a time sensitive-matter, additional support options are available at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Maybe you are looking for