My macbook cpu is always stay in a high temperature around 65 to 85 celcius degree

my macbook air 's cpu is always stay in a high temperature around 65 to 85 celcius degree. cpu fan 's rpm is 2000 to 3000 .
Is it normal ?

that is within a safe tolerance.

Similar Messages

  • Loud Portege M800 - CPU usage always at 50% or higher

    Hi,
    my laptop M800 always runs with fan at full speed, CPU usage runs between 50% to 100% even when no programs are running, is this normal?, seems the computer never seems to go to a resting or idle mode.
    hope someone can help
    cheers

    Hi
    Do you use your Portege with factory settings?
    What you must do is to stop all useless processes that run in the background. This will reduce CPU usage.
    By the way: change cooling method settings.
    You can find it in advanced power plan settings > Toshiba Power saver > cooling method. Change it to battery optimized.
    It will reduce cooling fan activity and notebook will run much quieter.
    Test it please and post some feedback.

  • Mid 2010 Macbook Pro will not stay off or asleep

    Hi,
    I have a mid 2010 MacBook Pro will not stay turned off when I tell it to shut down.  It will shut down just fine, but a few seconds later it will boot up again.  This also happens when I try to close the lid (or just put it to sleep), it will work fine, screen/Apple logo on the back will turn off and the status LED will slowly pulse.  However a few seconds later, the LED stops pulsing and the Apple logo will illuminate.  If I open the lid I will be greeted with the log in page with zero delay (i.e. its been displaying for a while).
    This has become problematic because the computer always be running.  If I put it in my laptop bag the computer will get hot as ****. The only way to get it to really turn off is to let the battery die or remove the battery.  But this computer does not have the externally removable battery so that is not a trivial process.
    The symptoms exist in both Mac OS (Mountain Lion and Maveriks) and Windows 8/8.1.  This makes me believe its something in the hardware (or at least a setting in the hardware), not software (I know Apple doesn't care what Windows does, but it is exibiting identical behavior).
    I have reset the NVRAM and the SMC with no luck.  When I reset the SMC I didn't get a good indication that anything happened though, and was wondering if that is normal.  Resetting the NVRAM results in another restart, while its hard to tell if you actually reset the SMC.  I reset the SMC by turning the computer off, then holding the power button when it tries to restart (this usually gives me a few minutes where the computer will actually stay off), then pressing shift, control, option and power at the same time and releasing them at the same time.  This is how the Apple documentation said to do it.  They did not mention how long the must be held though so I presume that doesn't matter.
    Anyone experience this/have any ideas?
    Thanks,
    Jim

    Btmm error "can not coonnect to cloud server" Facetime and IMessage " Could not sign in, check your network connection and try again". Which I have again and again...

  • How can I script a Flash .exe file to always stay on top of all other windows?

    Hi All,
    I'm new to action script, and I just need this one script
    > How can I script a Flash .exe file to always stay on top of
    all other windows?
    Basically what i want to do is have a flash-created
    step-by-step instructional movie, but for the movie to remain on
    top of all windows so the instructee is able to follow the
    instructions on-screen...
    It would be preferable to not have to buy another product
    just to do this... as I said, this is the only scripting I need.
    Thanks in advance
    Cheers
    Rick

    if you create your exe with mProjector you can use one of its
    new AS
    commands to do this.
    setZOrder
    http://www.screentime.com/software/mprojector/docs/mWin_setZOrder.htm
    all APIS
    http://www.screentime.com/software/mprojector/docs/index.html
    Demo
    http://www.screentime.com/software/mprojector/demo.html
    mProjector installs new classes and help into Flash, to
    enable them you
    must build your app with mProjector (its input is your swf)
    John Pattenden
    Screentime Media - Flash Tools since 1997
    http://www.screentime.com

  • I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1

    I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1

    I haven't gotten a new sim card because the problem has been presenting itself in various cards not only mine. So far, all I've done is reset my network settings.
    Last night, I turned off the 3G tab and it had all the signal bars. Today, I did the network reset and it's working apparently. But like I said before, previously the bars just disappear and the iphone only has the 3G activated.

  • How do I set a fixed page size in Muse so that the window always stays the same size

    how do I set a fixed page size in Muse so that the window always stays the same size

    Hi Aish & thanks for responding;
    I would like the window size to stay the same for the entire site and not be
    able to scale to drag & scale it. ie 950 pixels x 500 pixels.
    Thanks,
    JB
    On 12/4/14 3:30 PM, "Aishvarya Raj Rastogi" <[email protected]>

  • Mac OS X v10.5: Does the Finder always stay open?

    First off: sorry again for all the n00b questions.
    Next: So does the finder always stay "open"? Like with the blue dot below it. I already asked about the others and I realized I have to click command+Q but for the finder... it just stays "open"
    Oh and Is there a way to search on this forum? I know on the forum for my car ('97 Acura CL if anyones curious) there is a search function that all the n00bs are told to do before starting a new thread...

    You can quit the Finder but the option is hidden by default in OS X. As the Finder is the way that you interact with OS X its default is to restart automatically if it's quit. For example if it locked up (never happened to me though) and you used Force Quit (alt - command - esc) it would restart automatically. Using a third party application like TinkerTool (which simply opens up more of OS X'x capabilities) you can quit the Finder for specific purposes. 
    cheers
    mrtotes

  • HELP!  I subscribed to imatch on my mac so that I could access the songs anywhere with my iphone.  However since I live in a rural community I would like to make playlists that always stay on my phone in case I don't have service.  Not sure how.

    HELP!  I subscribed to imatch on my mac so that I could access the songs anywhere with my iphone.  However since I live in a rural community I would like to make playlists that always stay on my phone in case I don't have service.  Not sure how.

    I have the same issue.  While I am sure your solution would work, my playlist has over 6,000 songs and hiting every song to download it is not very practical.  Is there another way?
    I am looking to have a subset of my music physically on my phone so that I can play it without internet access, but have access to the entire library when I do have internet access. 

  • Please help. just got my jabra halo, worked fine with my iphone4 but can't use it on my macbook pro. it always prompts " the devise does not have the necessary service

    please help. just got my jabra halo, worked fine with my iphone4 but can't use it on my macbook pro. it always prompts " the devise does not have the necessary service

    Found these instructions here:
    https://discussions.apple.com/message/15388885#15388885
    I found an answer that worked for me. I am using an iMac.
    (1) Sign out of the iTunes store
    (2) Open a NEW account with a new Apple ID
    (3) Go through the sign up process and then go to the ACCOUNT INFORMATION page
    (4) Go to RECOMENDATIONS & PING POSTING
    (5) Turn on Genius there
    Once the Genius updates, you can sign out and then sign in under your original Apple ID or the e-mail address you use for the iTunes store. All my store credit was there and now Genius worked.
    Rather odd but I actually like the Genius at times except when it can't deal with some of my lesser known bands that I listen to.
    Worked for me.

  • My labeled files on my macbook pro won't stay colored

    my labeled files on my macbook pro won't stay colored

    Ok, in theory you cannot lock the hard drive, so, run Disk Utlities, First Aid, Repair Hard Drive again.  It should come back with a message that all is OK.  Then run Repair Permissions.  That often returns a lot of messages that are not actually problems, just grumbling by the system.
    Then try a normal restart by clicking the apple left side of the menu bar, Restart.  If you restart normally all is fine.
    If not, then restart on the recovery HD again and try an Install Mac OS X and see if that succeeds this time.

  • MacBook Pro won't stay asleep with external monitor attached.  When sleep is selected from the Apple menu the computer will go to sleep only to continually wake up...go back to sleep...wake up...etc. every few seconds.

    MacBook Pro won't stay asleep with external monitor attached.  When sleep is selected from the Apple menu the computer will go to sleep only to continually wake up...go back to sleep...wake up...etc. every few seconds.  This only happens when using the external monitor. Does anyone have any suggestions?

    Mine does that too. The worst thing is when it goes to sleep, then wakes up and keeps running while the lid is closed and it is wrapped up in a case. I am afraid when the hot weather comes it is going to burn up. I am hoping Apple fixes it in the software or they may have a melted MBP to replace.
    Then when I open the lid it is crashed running at fill tilt, pumping out heat to beat the band. I am forced to hold the button down and reboot.
    I wiped my hard disk and reinstalled my OS, but it didn't help. I reversed my OS to 10.5.0 and it solved the DVI problem but still won't sleep. This post will probably be deleted by Apple, they did it a few days ago. I just don't know what to do, and I consider myself a real Apple expert. Just hoping you realize you are not the only one.

  • HT204146 My MacBook Air is always telling me that my start up disk is full or fairly full. Will iTunes match alleviate this problem? I have an iCloud account.

    My MacBook Air is always telling me that my start up disk is full or nearly full. Will iTunes match alleviate the problem of storage on my Hard Drive?  I have an iCloud account.

    It could, but I wouldn't.  You really need two external hard drives (one to act as a backup for the other one).  Relocate your entire iTunes library to the external drive unless there are things you would prefer to simply archive (movies you don't need to watch everyday).
    FAQ: Why iTunes Match Can Not Be Used as a Backup - https://discussions.apple.com/docs/DOC-4112
    Using Match as a backup for iTunes - https://discussions.apple.com/message/17039436#17039436
    To move a library if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its sub-folders and files) intact to the other drive.  Hold down the option (alt) key (shift on Windows) and open iTunes.  At the prompt to create or choose a library choose the copied iTunes folder.

  • Does the light for ATV always stay on?

    Does the light for ATV always stay on?  Is there an off button?

    Hi Mark,
    I don't know the specific answer to your question, but thought I'd pass on that even with a bad DC In board, my power supply looked like it was functioning normally...
    So, suspect that even with a green or amber light, you could still have a problem...
    I'd take the computer and power supply to a Mac store to see if a replacement power supply fixes your problem... Maybe a new power supply will charge the 'dead' battery...
    Bob

  • Does the 2012 Mac Pro have 2 CPU socket always? If I buy one CPU setup, can I upgrade it later to 2 CPU?

    Does the 2012 Mac Pro have 2 CPU socket always? If I buy one CPU setup, can I upgrade it later to 2 CPU?

    If money is no object, OWC will swap 2010 or 2012 Processor shelves for whatever you want as long as you have a working Mac Pro 5,1 shelf to swap and a ton of money.
    http://eshop.macsales.com/shop/turnkey/MacPro/2010_Xeon_Processor
    The basic charge is US$949 starting from the 2.8 Quad.
    • to move up to the 3.33 hex add US$550 to the base price for a total of about US$1500.
    • to move to dual Quads or dual hex ADD $1470 to $4250 to the base price.

  • My fans on my MacBook Pro are always going off

    My fans on my MacBook Pro are always going off
    I am running VM ware as soon as I go to the PCs
    Side  The fans start
    I can also be on the Mac side in the fans just start going
    I'm not able to get online
    On the PC side
    And anyone please help

    No sound with headphones.  I ended up restarting my computer and upon rebooting the sound came back.  So it works but I have no idea why it stopped working.

Maybe you are looking for

  • JDBC memory leak in 11.2.0.2.0 driver ?

    Hi, my customer on WLS 9.2.1 have just upgraded to new database and to a new JDBC Oracle 11.2.0.2.0 driver and it seems there is a memory leak. Based on heap dump it seem that leek i near oracle.jdbc.xa.OracleXAResource$XidListEntry. Admins are missi

  • SAPKCCD46C Command file for customer export

    Hi, We installed a new system 46C on Win2000/Oracle. then created a client. Then we import all customer develement classes in our PROD system to new system. Aim is to construct new system using client export import from our production system. during

  • "automatic" transcode settings is not filling my DVD capacity

    I've put together four AVI files in Encore and every time I go through the "build" process 20 GB worth of material is reduced down to 720 MB (approx).  I always thought that a great advantage in using Encore was that it filled your material to fit th

  • Adobe Premiere Elements for Mac

    Is there any version of the Adobe premiere elements that works on Mac and Windows? Thanks.

  • NO_TOTLINE in factory method

    Hi All, I am using factory method (SALV) for my grid. I have used aggregations and sub totaling for few fields. I want to remove Grand total line in the display. I know there is field NO_TOTLINE in REUSE_ALVGRID_DISPLAY Function module in LAYOUT stru