My MacBook didn't work after the last update OS 10.7.2

I have MacBook Pro, i5 dual core 2.4. Just bought it yesterday and updated the OS to 10.7.2. after the update by less than tow hours, the mac shutdown and didn't work and not accepting the charger also!
Please guide me what to do with this issue

Bring it back to the store you bought it from. You are under a 1 year warranty.

Similar Messages

Hi i have iPhone 4S and some of the apps i've bought or downloade for free don't work after the last update iOS 6.0.1.Can you tell me why?

I have iPhone 4S and some of the apps I've bought don't work after
the last update iOS 6.0.1
Can you tell me the reason?

most likely the app developer havent made it compatible

Safari , App store , Ibook and preview won't work after the last update!

i bought my mac book pro since early 2011
and after i did the last update safari , App store , Ibook and preview won't work
when i press on it the small light on the dock light up then it goes off
and nothing open and there is no error massage show
and the bar don't change, plus about my mac don't open too
firefox and itunes work fine tho

I also deleted Safari and tried to reinstall it from the Apple website but It would not let me install it. I got to "select location" section and it would not allow me to select any of my drives because it said it required10.5.2 or newer. I have 10.5.3. Any Help?

Airplay does not work after the last update on iMac

Today I have instaled the last updates on my iMac and the AirPlay mirroring on my AppleTV does not work anymore. I can hear the sound but the video doesn't work. Somebody knows how to fix this? Really dissapponted with Apple products.

Try resettng the SMC and PRAM each 2-3 times, then post back.
Instructions are in Intel iMac SMC and PRAM resets

My E71 didn't startup after the last update!

I updated my E71 today. This isn't my first time. What happened today as usual after completing the update. It says startup your phone. I tried several times but it didn't startup the only thing is gives is the keypad light, it turn on like twice then it stopped.
If any one can help me in this I would be grateful.

try the last option with phone turned off. if this does not work your only option is to take it to nokia care for service.
With all these operations I recommend you TAKE OUT MEMORY CARD and DO A BACK UP OF YOUR STUFF!!!
1. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list. The default code for ALL operations listed here is 12345
2. *#7370# - Reformat your phone (out of the box, tho keep in mind that most newer nokia phones at least n series, e series and s60 based phones have udp - user data preservation so not ALL data may be lost. still it is a good idea to always do a back up of your stuff.)
3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
hard reset - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons ( for Nokia 5800XM - use the following buttons to do a hard reset, GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. ) For Nokia N97 (unofficial version but works) is SHIFT /SPACE BAR / BACKSPACE while holding the power button. Again do not let go until you see the handshake screen.
If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service for assistance.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Isight camera not working after the last update

After reboot of the last OS update
Isight camera not working...
i've tried photobooth, ichat, skype and it doesn't show up anywhere. in fact, when i go to system profiler, it doesn't show isight under USB connections at all.
just to give you a recap of what i've tried so far:
* restarting (obviously)
* resetting PRAM/SMC (by booting it the way it was specified in the isight troubleshooting thing)
* just shutting down my computer and taking the battery out for several hours
any Help pls
because i mast to use it as soon as possible in a conference

*A few suggestions.........*
Try running repair permissions from your HD and afterwards run +repair disk+ from your software install DVD.
my isight camera is not working-not recognized with photo booth or ichat
To fix your iSight, shut down computer. Reboot in safe mode (press power button and then hold shift key down). After computer boots, restart again. Hopefully, your iSight will start working again.

Why don't my fonts work after the last update?

I just updated my laptop & now all my fonts won't work! EVEN if it says it is the font I've selected!
I use Microsoft Word & Excel on my Mac.
Also, the fon't are listed as:
1-True Type
2-Open Type
3-Postscript
Under:
/Library/Fonts/then name of font
/Library/Fonts/Microsoft/then name of font
/System/Library/Fonts/then name of font
/Users/terri/Library/Fonts/then name of font
What the heck is happening? I have NO idea what all the above means.
I just love using FONTS!!!
ANY help/comments/insight you may have would be appreciated!
Thanks!
Terri

I'm having this same problem. These community forums can be a huge waste of time. Seems like the hard questions never even get answered. My iTunes won't play my HD movies that it played before the last iTunes update. Now that I upgraded to Yosemite it's even worse.

Airplay is not working after the last updates

Hello,
I've updated iphone, ipad air and ipad 4 to ios 8 and apple tv 3 (1469) to newest version (7?).
After that it's absolutely a disaster.
Mostly I using the apple tv for music streaming, sometimes for mirroring...
But it can not be found, I can not select the apple tv on ios devices because it is not there!
The airplay symbol comes after swiping the menu up after approx. 1 sec and theres only the Denon Cocoon to selcet but not the apple tv.
The same on the iMac I can not choose the apple tv directly from the top bar for mirroring and not in itunes for music streaming (but the Cocoon is there), and this altough the imac is also via ethernet on the same router, no wlan connection is required for streaming in this case.
The apple tv is connected by ethernet to the router and I see in the router menu that the apple tv is connected to the internet.
I did a hard-reset but this did not help.
I've tried also with blutooth on or off and rebootet the ios devices.
From time to time one of the different devices shows the apple tv...this morning for example after I turn blutooth on at the iphone and waited 30 seconds, it was there and it worked - sometimes on device shows the apple tv without blutooth and if I connect, nothing happen and the music starts on the device itself.
If I start the apple tv via remote, everything is fine, I find it at all devices including the imac!
If I managed it to start the music streaming with an device (as written, from time to time it works) the apple tv is avaible on all other devices.
For me theres no question that theres a bug in the new apple-tv software (because I can not find it on the imac as well, otherwise I would think the bug is in ios 8).
It is not possible to wake up the apple tv via airplay from sleep mode, I think that is the problem - if I turn off the sleep mode everything is fine.

the1sen wrote:
There appear to be many others with the same issue on here.
Nothing unusual in that after an update.
Generally speaking it's fairly obvious from the volume of such posts if there's a problem with an update or not. On this occasion I'm not seeing the sort of numbers that indicate a widespread issue.

[Open a new tab] doesn't work after the last update!

Firefox just updated today and now all the sudden when I try to press the [+] to open a new tab nothing happens. Mousing over it even says it's still the same button. It's odd and rather inconvenient.
Firefox is updated to Version 29.0.1

Hello,
try to uninstall your Firefox and then reinstall your Firefox.

Problems in XORG after the last update.

My gdm not works after the last update.
GDM open, but when i try login, this panel close and open again.
My xorg.0.log http://pastebin.com/epTaJ1zN
Please help-me !

Which graphics driver are you using?
A nice alternative display manager for while you try fix gdm is lightdm https://wiki.archlinux.org/index.php/LightDM
otherwsie:
https://wiki.archlinux.org/index.php/GN … .2B_cursor
https://bbs.archlinux.org/viewtopic.php?id=161900
Last edited by jrussell (2013-06-04 17:01:41)

After the last update iTunes no longer works... "This application failed to start because MSVCF80.dll was not found. Re-installing the application may fix this problem" I tried and it did not fix the problem?

After the last update iTunes no longer works... "This application failed to start because MSVCF80.dll was not found. Re-installing the application may fix this problem" I tried and it did not fix the problem?

Click here and follow the instructions.
(99061)

I have an ipod touch 4th Gen that everything was working perfectly. After the last update of iOs5, the battery have charge 20 minutes. Even after the correction of the iOS 5.0.1 the battery have the same 20 minutes. What I can do?

Hi
I have an ipod touch 4th Gen that everything was working perfectly. After the last update of iOs 5, the battery have charge 20 minutes. After the correction of the iOS 5.0.1 the battery have the same 20 minutes. What I can do? Thanks

Same thing here. Try putting the brightness down all the way (its hard to see at first but you will get used to it) and one more thing is that close all you open apps. So to do that you have to click the home button twice (after you put your passcode in) and you will see some apps in the bottom. Hold it until there is a red - sign. click all of them so they go away. This does not delete your apps it just makes your ipod better.

The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu

PROVA

Yes, I know that, but I ever work with the right mouse button,
because selecting groups and subgroups with double click make some confusion for me.
Regards,
Fabio
ufficio tecnico
grafica e prestampa
Via Verdi, 11 - 43058 Sorbolo (PR)
Tel. 0521.694111 - Fax 0521.694360
E-mail: [email protected] <mailto:[email protected]>
E-mail: [email protected] <mailto:[email protected]>
Web: www.litoexpress.it <http://www.litoexpress.it/>
Il giorno 28/ott/2014, alle ore 06:57, Satinder S Bains <[email protected]> ha scritto:
The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu
created by Satinder S Bains <https://forums.adobe.com/people/SatinderSBains> in Illustrator - View the full discussion <https://forums.adobe.com/message/6874053#6874053>
You can double click on the selected object to get into the multilevel isolation mode.
Regards,
Satinder
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6874053#6874053
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Illustrator by email <mailto:[email protected]m> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 67>
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0 <http://forums.adobe.com/thread/416458?tstart=0>.

After the last update Acrobat X Pro doesn't work anymore. It doesn't open

after the last update Acrobat X Pro doesn't work anymore. It doesn't open

Prakash,
Since I couldn't get a hold of someone at Adobe today, Sunday, would you please let me know about the following:
1) My laptop has "blue screen of death". What can Adobe do for me if I restored my system back to when I first bought it from the store and potentially lose my Adobe X?
2) I bought my Adobe X on Jan. 10, 2010 thru Barnes & Noble Campus E store thru JourneyEd.
Rosemarie

Why did AME stop working after the last Windows 7 update

AME suddenly stopped working after the last Windows 7 update. After the initial splash screen, I get a message saying that AME is not working and the program will be closed. Then I get the windows message that it is searching for a solution, then nothing. I am using the Production CS6. This happens whether I try to start AME directly, or queuing through Premiere Pro. I have tried reinstalling the entire package and have implemented all available updates from Adobe. I have no clue why this happened, but AME is crucial to my workflow.

Try to delete the following folders and then launch AME:
%AppData%\Adobe\Adobe Media Encoder
%AppData%\Adobe\Common
Make sure to first make a backup of those folders.

My MacBook didn't work after the last update OS 10.7.2

Similar Messages

Maybe you are looking for