My macbook doesnt work ---- blue screen

i cant get in my macbook air because ther us a blue screen ! please help me!!!

Had exactly the same symptoms: Normal start but instead of the desktop building up just a blue screen!
Repair via disk utility was one measure but did not solve the problem. Sould you have a second Mac start the Mac Book as fire wire HD ( press and hold T during start), connect it via firewire to the other Mac. It should appear as an external HD on the desktop! With "command + i" you can check the HD infos and the user rights!
Make sure all say read and write! The box next to "ignore owner..." should be ticked!
To make 200% sure that everything works on the next start up you can create an additional account for user "unknown" with read and write permissions!
After that  pull the HD (i.e. your MacBook) into the trash bin, disconnect the fire wire cable and shut down you Mac Book by holding the ON/OFF for about 3 sec.! Now you are ready to restart! Good luck!
PS: If you don't have a second Mac - find a friend with one or try a store selling Apple equipment!

Similar Messages

  • Macbook Pro 2011 blue screen with loading icon

    I was using my 2011 15 in. (2.0 GHz model) Macbook Pro, when a blue screen popped up for a second or two showing a circular gray loading icon, then disappeared and it looked like I had just logged in. It started to load the dock and desktop icons and my startup programs opened, but it didn't look like it had restarted because it didn't ask for a password, and only lasted a few seconds including the blue screen. At the time it had happened, I was working on a very high poly model in Blender, which might have caused it. I just got this computer, so I really hope there is nothing wrong with it, but I also got a warranty on it, so if there is anything wrong I can bring it in. If anyone knows if this is serious or not, please tell me. Thanks.

    Thanks for your response, and since I submitted this question, the same problem happened again. This time I was playing Left 4 Dead 2 on Steam, so I'm noticing a trend where this problem only occurs when I'm working with 3D graphics, which is basically why I got the Macbook Pro in the first place, thinking it would be good with this sort of thing. Interestingly, though, I first played the game on this computer fine at fairly high graphics settings and got a good, steady fps for about an hour, but the second time, when this crash occured, I had only just started. This has gotten me confused and worried, and I'm wondering if I should bring it in to Apple, and if so, if they can fix it. Any answers would be great. Thanks!

  • New MacBook getting the "Blue Screen of Death" equivalent

    So I just snagged a macbook from my school's bookstore.
    I've gotten the "you need to restart your computer message" that shows up in 5 languages or so twice already in the first day. i.e. the Mac equivalent of the Windows "Blue Screen of Death". I believe its called a "Fatal Error".
    I don't remember what I was trying to do the first time (I /think/ I was attempting to browse my network from the sidebar in Finder), but the second I was trying to get a program called Studiometry (http://www.oranged.net/studiometry/) to connect to my iMac and sync the program's database. I was already connected via Finder (Go >> Connect to Server). When I chose "connect to server" in Studiometry a second after it attempted to connect--Kaboom! I can't get the program to connect, but that doesn't concern me: I'm more worried about keeping this suspect machine.
    Other than playing with the pre-installed stuff (iLife, PhotoBooth, etc.) I have:
    1. Installed Windows XP SP2 with Boot Camp
    2. Used http://www.logmein.com/ to remote in from OS X on my MacBook to Windows Vista Ultimate at work.
    3. Installed Studiometry
    There is nothing else I have done that doesn't come in the box.
    I had a PowerBook give me grief the first week and the bum crashed on me pretty hard. Not interested in that again and I'm thinking of taking this back for a new one. Ugly babies usually get cute in a month or two, but ugly computers typically don't.
    Any suggestions?
    MacBook   Mac OS X (10.4.10)  

    Here are all my panics minus all the text in between them:
    panic(cpu 0 caller 0x0035E7BD): mbuf address out of range 0xfce54a
    panic(cpu 0 caller 0x0035D0BB): mbuf address out of range 0x4700a8c0
    panic(cpu 0 caller 0x0035CDC6): mget MCHECK: m_type=ffffaaaa m=26b6ec00
    panic(cpu 0 caller 0x001A4A55): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
    panic(cpu 0 caller 0x001A4A55): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
    panic(cpu 0 caller 0x0035DC60): mbuf address out of range 0x7a90e98f
    panic(cpu 0 caller 0x0035D0BB): mbuf address out of range 0xffff0100
    panic(cpu 0 caller 0x0035D113): mbuf address out of range 0xffff0100
    Ever since I started paying attention to battery power v. adapter, all have occurred on battery power and none while the adapter was plugged in. (The first two I don't know, but all the rest were on battery).
    One of them actually happened while I was sending a file using Bluetooth from my iMac (still probably airport though since it was on).
    While this is fun and all, I'm taking this bugger back and exchanging for a new one. Apple can have a blast troubleshooting this for a refurb. :P

  • Macbook hangs on blue screen with menu icons, won't start

    I am having an issue with my MacBook (2010), which won't fully start up anymore. It gets past the initial grey loading screen and starts loading a few of the menu bar icons in the upper right corner. Then it stops with only a few of those icons loaded, a blue screen, and no desktop icons.
    The MacBook is running 10.6 (if I remember correctly, it's 10.6.8, but I'm not 100% sure).
    Things I've tried already:
    - Safe boot (doesn't work, no indication that it recognizes me trying to start it in safe mode)
    - Resetting the PRAM
    - Leaving it on for a long time to see if it will eventually start
    I lost the OS disc a while ago, so unfortunately I can't boot from that. Any other suggestions would be welcome.

    You might want to consider running the combo updater over your install to refresh your files.
    Combo updater: Mac OS X 10.6.8 Update v.1.1 - 1.09 GB
    http://support.apple.com/kb/DL1399
    MORE INFO ON WHY RUNNING COMBO FIXES ISSUES
    Apple updates available from the Software Update application are incremental updates. Delta updates are also incremental updates and are available from Apple Downloads (software updates are generally smaller than delta updates). The Combo updates contain all incremental updates and will update files that could have become corrupted.
    Combo updaters will install on the same version as they're applying--no need to roll back or do a clean install. So if you think you've got a borked 10.6.8 install from a regular update, just run the 10.6.8 Combo Updater on that system.
    "Delta" updaters can only take you from one version to the next. For example: 10.6.7 to 10.6.8. If somehow the 10.6.8 is missing something it should have, and that something isn't changed between 10.6.7 and 10.6.8 it will still be stale after the delta update.

  • Early 2011 2GHz Macbook pro distorted blue screen then wont boot, 3 times in last 2 weeks

    I have an early 2011, 2GHz macbook pro (15' model with ati radeon graphics). It was running fine for the last two years. Over the last couple of weeks, following things happen:
    1. I was running on bootcamp windows, browsing and some flash content was open, suddenly distorted blue stripes appear and it froze. Force shut down using power button, turn on again and it wont boot on windows or mac, or recovery partition or from the dvd. Tried for about 4 hours, after nvram, pram reset, it was able to safe boot, then run disk utility to verify and repair the disk, it said that there were problems with hard drive and fixed,then booted normally.
    2. I thought that the problem might be because I was on windows, so took a back up of the windows drive, erased it and installed windows 8 using bootcamp. It ran well for an week. After that, once I connected it with the tv using HDMI to watch a video, after I disconnected it, the screen was garbled over the windows start screen, but I was able to command restart normally. After restart, it wont boot to windows or mac.
    3. After several hours of trying, i was able to boot using the dvd this time, it said it 'can not install mac on the hard drive', erased the hard drive and it was able to install the os (snow leopard). After completing install, logged in to app store to download previously purchased mountain lion. Then ran it to upgrade the os, after the upgrade was completed, at the point when it prompts for apple id and password to set up icloud, it again froze with distorted blue screen. Shut down forcefully. Then turn on again and it wont boot. After the white screen and the sound, it shows the apple logo and spinning wheel for a while, then a bright white screen and nothing happens.
    Can anybody help reading the symptoms?

    I have the Early 2011 2GHz Macbook Pro and I have the same problem too.
    I switched out the logicboard a month ago and today the graphics just went distorted.
    Any solutions? Now I'm thinking it is the Graphics Card.

  • Macbook stuck on blue screen and cant turn it off even by holding the power button.

    Bought a refurbished macbook and it arrived today. was enjoying it for a while then i decided to reboot to get the new OS. I came back to it a minute later and there was a blue screen with the loader on it. Its been in this state for hours now and i cant reboot by holding the power button so i have no idea how to actually do anything. At the moment im leaving it running in its current state hoping it will all be sorted once the battery has run out. ANY help appreciated as i cant find anything whatsoever in forums that has any relation to my problem!!!

    More details bud... WHAT MBP version do you have? What movie player are you using....? Is it a AVI MP4 MKV? IS it a DVD???

  • My Macbook has a blue screen that wipes to gray with little squares??

    When waking up my MacBook it'll have a totally blue screen that wipes to the gray log in screen with my curser.  It wipes in little squares.  Once I wipe clear enough to see my log in box and put in my password, it clears up and logs on.
    What does this mean?  Is my LCD going bad?

    If it's gotten past the hardware tests (assuming you mean the ones on your Install disks) then assume for now that the problem lies in the OS rather than the hardware. That means, for one thing, that you're actually in the wrong forum and should be moving over to the Mac OS X v10.4 Tiger section, probably the Installation & Setup forum you'll find there.
    On the way, take a look at the contents of the following KB article. It will get you started on the troubleshooting of this problem, and reporting what you've done from here (and what the results were) will speed the process in the other forum.
    See http://docs.info.apple.com/article.html?artnum=25392

  • Keyboard and lightning of my macbook doesnt work, neither does the usb keyboard work. I need to reinstall osx as its showing the folder with a questionmark. Any suggestions?

    I've got a Macbook Pro 13" early 2011. The keyboard and its lightning doesnt work, neither isnt working anymore. I need to reinstall osx as its showing the folder with a questionmark. An USB keyboard doesnt work either.. Any suggestions?

    Restart.
    Try this. I know you said "keyboard is not working.
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.
    Best.

  • Macbook goes to blue screen on wake up?

    My MacBook Pro goes to a blue screen upon wake up from sleep mode. Have to restart machine to get it functional. Any ideas of how to fix this issue?

    Hi there 504lmc,
    While this isn't the exact issue described in the article below, it may still be worth it to take a look at some of the troubleshooting steps found there.
    OS X Mountain Lion: If you see a blue screen at startup
    http://support.apple.com/kb/PH11043
    -Griff W.

  • MacBook stuck on blue screen when starting up?

    So I started my MacBook the other day (running Tiger) and it was stuck on the blue screen (with the apple logo) for a long time. I figured it was just slow and left the room. Came back about 15 minutes and it was still stuck. Went to the following site:
    http://support.apple.com/kb/TS1411#symp1
    and tried starting in solo mode, etc and made it all the way down the list till it said try Disk Utility (not exact name I don't think) so I put in the Install disk that came with it and attempted to repair it. It said it was unable to repair due to a node error or something along the lines.... I gave up and am reinstalling OS X (Erase and start again is what I did which is okay as I have no personal files on that computer, I keep them al on my iMac and backed up on my Time Capsule) not to go off on some rant but my question is will the computer fix whatever a node is by completely erasing the hard drive and starting over? It's only at 22% complete so I'm not sure yet. I consider myself fairly computer competent but can someone explain what a node is and how it got messed up?

    Yes and erase and install will fix ANY type of software issue you are having. A node is something used to build data structures, if there is an error or one is corrupted it will affect the whole data structure, but no worries, the E&I will fix this issue.

  • Macbook Pro had blue screen of death.  Now hard drive wont wake up.  HELP!  Computer keeps freezing and crashing.

    About a month ago, the "beach ball" appeared on my screan.  I rebooted the computer only to a blue screen.  Was instructed to Safe Boot and repair my files.  I got the computer to let me in.  My only problem now is, when i open the mac, my hard drive does not make the wake up noise?  Im not so computer savey so im not sure what im experiencing.  My mac also sees the "beach ball" on occasion followed by it freezing and me having to hard reboot it.  What am i experienceing?!  Also when computer is booting up, a black screen with white lettering jimbo-jamble appears for a solid 30 seconds to a minute.  I am worrying because my macbook was bought refurbished about a year ago, never had ANY problems, and JUST LIKE THAT...i got a world of issues.

    My mac also sees the "beach ball" on occasion followed by it freezing
    Troubleshoot the spinning beach ball
    Also when computer is booting up, a black screen with white lettering jimbo-jamble appears for a solid 30 seconds to a minute.
    Kernel Panics? Don't panic too!
    "You need to restart your computer" (kernel panic) message appears (Mac OS X v10.5, 10.6)
    I dont have a Apple store around me.  Nearest is around 5 hours away.
    Apple stores are not the only places that repairs Macs.  Check to see if there is an AASP closer to you - How to find your nearest Apple Authorized Service Provider (AASP) 

  • Macbook Pro gets blue screen and resets itself?

    I have a 15in Macbook Pro, year 2008. I have Snow Leopard on it.
    I bought it refurbished online about two months ago however a few times it has done something none of my other Macs have done and I'm getting concerned. I will have it in sleep mode and when I try to wake it it is frozen. Next thing it does it go to a blue screen then it resets Safari and I have to open a new window and tabs.
    What is going on? I had two Powerbook G4's and neither ever did this. I would like to know so I can contact where i bought it since it is under warranty still.
    Thanks

    Thanks!
    Do you have a link? I did a search on APPLE and couldn't find it. I could be searching incorrectly but I put "install disc" in the search engine.
    It has been doing it more often and the place where I got said we didn't have the warranty so they won't help. My fiancee got this for me and I was on the phone telling him what to click and he added the warranty but it doesn't show on my purchase order so they won't help. To be honest I don't really want to send it to CA for repairs, I'd rather go thru Apple to get it fixed or looked at. IDK what happened with our order because I know he put in for the warranty and a RAM upgrade (which I still want as well as an HD upgrade) that isn't on here either which I just found out a few days ago when I looked at what the RAM was for school. It's not that big of a deal things happen when ordering online and I dont mind buying the discs if I knew where to get them.
    My concern is being the motherboard and if that is what the issue is. That term alone sends chills down my spine, I dont have the best luck with them! The only error message I get sometimes is a CPU error and I haven't a clue what that means. I did pay for a 24hr diagnostic on it before we got it, can things or issues show up later on? I don't do anything crazy online like DL. I only stream Netflix and that is about it.
    So Im just at a loss as to why this screen is coming up and why it resets my browser and goes to the desktop screen where I have to reopen all windows and tabs.
    Anyway, thanks for your reply. I will try to look more for the discs but if you have a link that would help.

  • I have a MacBookPro. When try to do a video call on facebook. The video camra doesnt work. the screen breaks and you can only hear some things. I update adobe flash so it has the latest verion. do u know wat going on ?

    i have a mac pro. when i try to connet to a vedio call. the call doesnt connet. the person on the other side can see me but i cant see them. i updated the new version for adobe flash. but the camra stiil doesnt work.

    You might want to see if the following article helps you:
        http://osxdaily.com/2011/07/06/facebook-video-chat-mac-os-x-lion/
    Hope this helps

  • HT201236 MY MACBOOK PRO SHOW BLUE SCREEN WHEN I SET UP OS.....

    when i try to set up mac os in my probook,its show blue screen.how can i solve it?

    Maybe:
    OS X Mavericks: If you see a blue screen at startup
    Yes even though you have Yosemite
    http://macs.about.com/od/MacTroubleshootingTips/qt/Troubleshooting-Mac-Startup-P roblems-Stuck-At-The-Blue-Screen.htm

  • When I turn on my Macbook, only a blue screen appears with no Dock or info in the menu bar

    When I went to turn on my Macbook OS X today, only a blue background showed up. For some reason the only program that opened was Bittorrent and besides that in the menu bar at the top there is nothing on the screen. The dock wont appear even if I hold my mouse down over where it should be. There is no time display in the menu bar. I can open single applications at a time by clicking on the apple icon in the left corner of the menu bar and selecting "recent items" but other than that nothing else works. When I go into "system preferences" and try to click different display options for the dock and menu bar such as the clock, it won't let me select it.
    I tired booting up the computer in "safe mode" and everything was fine, but then when I went to do a regular start up the same problem occurred.
    Has any one else seen this problem.

    Try running this program and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor.  Please use copy and paste as screen shots can be hard to read.
    Etrecheck – System Information

Maybe you are looking for

  • Creating threads based on information read from a configuration file

    Hi. I'm writing a program where I need to use threading. I've done some threading in my past, but I'm no expert. What I need to do is create a number of threads dependant on how many are requested So I have a conf file where: SomeValue = String1, Str

  • Passing a resultset to a method

    Hi all, I want to pass a resultset object that is scrollable and updateable to a method. THe problem is that, the resultset object in the other method is not scrollable or updateable anymore. Eg. Statement stat = null; ResultSet rs = null; stat = con

  • HTTP Header not showing up

    I am trying to add a authorization header to the HTTP Post, but it isn't showing up when my end point is https. It only shows up when my end point is http. This is how my header is supposed to look like, but it only works when my end point is http. C

  • Changing Desktop Pictures

    I selected a folder full of images to use for my desktop pictures. The thumbnails display and I select an image and it shows in the upper left corner of the window, however, it will not change on the desktop. I also tried to select the options for Ch

  • Strange request: varchar2 as multiple rows..

    Hi all. I have a varchar2 field with a delimiter and want the output in multiple records based on the delimiter. Ex: if the table name is XYZ and the data is as below XYZ field1~~~ field2~~~ field3 1~~~test1,test2,test3,test4~~~123123 2~~~test5,test6