My MacBook freezes occasionally...is there a way to bring it out of frozen?  What would be causing it to freeze?

My MacBook freezes @ least once a week.  I have to shut it down.  What might be causing it to freeze & is there another way to bring it out of frozen other than shutting it down?

Not enough free space on the disk can cause the system to freeze...
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space
Check the startup disk in case it needs repairing >  Using Disk Utility to verify or repair disks
MacBook, Mac OS X (10.6.5)  <  your profile
If that is correct, when you can, you need to update to v10.6.8
Updates are available from your Apple menu > Software Update...
Not enough RAM can cause the operating system to freeze also. You may want to consider increasing memory. To see how much memory you have installed click your Apple menu icon then click About This Mac. That will prompt the System Profiler. See Memory under Hardware on the left.

Similar Messages

  • Is there a way to transfer photos from an iPhone 4S to a flash drive (via MacBook, of course)?  There are way more photos in iPhoto than just what is on my phone, and I really just want to have a flash drive of "iPhone 4S photos."

    I know how to move things from iPhoto to a flash drive, but I'm hoping there is a simpler way to get the photos from my phone to a flash drive, because there are so many photos in iPhotos that I don't need on the flash drive.
    Thanks

    There isnt a simple way.  You could create a whole new libaray, move all your pictures to that, then move the libaray to a flash drive.
    From what you have said, can you not just create an album/event and move all your iPhone photos into that.  That would seperate it from the rest of your content, then as part of that process delete all the photos imported off of your iPhone..... just an idea

  • TA25361 I have a ton of documents and databases in AppleWorks v 6.0 that I can no longer open on my MacBook Pro.  Is there any way to recover this info?  Some documents can be opened and resaved with textedit, but not my database with all important addres

    I have a ton of documents and databases in AppleWorks v 6.0 that I can no longer open on my MacBook Pro.  Is there any way to recover this info?  Some documents can be opened and resaved with textedit, but not my database with all important addresses.

    I tried Peggy's List > Select All > Copy > Paste into an AW spreadsheet suggestion.
    In my case, pasting into the spreadsheet lost all text formatting (mostly text set to bold). The results of formulas were pasted, and checkboxes were pasted as "on" or "off". The DB did not contain any pop-up menus or radio buttons, but I expect they would transfer as a number showing the list position of the chosen item.
    Pasting the copied List view data into a Numbers table gave a result similar to that with AppleWorks. I selected B2 as the target cell (for top left cell of the pasted data) to avoid any effects of posting into a header row or column. Bold and regular text formatting looked the same as it had in AW's List view.
    Based on that, I'd slip the 'paste into an AppleWorks Spreadsheet step, and paste directly into a Numbers Table.
    Regards,
    Barry

  • I have a 2007 13" Macbook White. Is there any way to upgrade my OS from 10.6.8 to anything above 10.7?

    I have a 2007 13" Macbook White. Is there any way to upgrade my OS from 10.6.8 to anything above 10.7? I keep getting an error message when I try to download 10.8.3 because Apple didn't make it compatible with my machine, but I really only need 10.7. So is there ANY possible way to do this with my current Macbook? Thanks for the help guys.

    I have a 2007 13" Macbook White. Is there any way to upgrade my OS from 10.6.8 to anything above 10.7
    According to these system requirements, no, there is no way to go higher than Lion (10.7), as Mountain Lion (10.8) will not be compatible.
    http://www.apple.com/osx/specs/
    Also note that both Lion and Mountain Lion are memory hogs and the realistic minimum RAM should be 4 GB; you can run it with 2 GB, but depending on how you use your machine, you may not be happy with its performance.

  • HT5293 I use an MacBook OS X 10.9.  I think I tried to download OS X Mavericks without knowing what I was doing (still don't).  I think it may have slowed my MacBook significantly.  Is there any way to safely remove it?

    I use a MacBook OSx 10.9.  I think I tried to download the OS x Mavericks not knowing what I was doing. I think I may have slowed my MacBook significantly.  Is there a way to safely remove the Maverick without affecting my computer?

    See this User Tip:
    https://discussions.apple.com/docs/DOC-6161

  • I have recently had to fire my web designer who was using iWeb.  Now I'm trying to figure out how to get the site to open in iWeb on my new MacBook Pro.  Is there a way?

    I have recently had to fire my web designer who was using iWeb.  Now I'm trying to figure out how to get the site to open in iWeb on my new MacBook Pro.  Is there a way?

    Firstly iWeb CAN'T IMPORT any kind of published html code as it has no import facility.  You can however add html code, javascript and css by selecting the html snippet and placing it on your page the entering the code in here and clicking on Apply.  You DO NOT create a shape as you say - you use the html snippet and place your code in there.
    There are not really a lot of ways in which you can write code - if you want to enter small amounts of code, then you would use an ordinary text editor to do this such as Text Edit on a Mac or Text Wrangler.  If you want to add code to iWeb like this, then you would either use the html snippet method in iWeb itself or you would have to publish the site to a local folder from iWeb and open the relevant html page with a text editor and add the additional code in this way and then publish.  However, if he decided to add the code with a text editor, then you would have to upload the pages directly to the server using an ftp client - if you try to upload the site directly from iWeb, all the extra code will be overwritten.
    As for checking whether the site was created using iWeb, all you need do is view the site in Safari and then click on View and then select View Source Code and it will tell you.
    Even thoough extra code was added to the site and he might well have done this by publishing to a local folder and adding the code with a text editor, he should still have the domain file for the site too.
    Ask again.  I'm sure that for adding quick code, most would not want to use programmes such as Dreamweaver, but a simple text editor will suffice.  As OT already said, if he claims that he does not have the domain.sites file, then try Flux 4 which is a web design programme and has full import facilities.  At least this way, if he just gives you the published version of the site, you have some way of opening it.
    You can download a free trial of Flux 4 and you can also purchase the full version from the Mac App Store if you decide you like it.

  • HT1222 I can't remember the answers to my security questions because I made the account like 10 years ago. Because of this I can't purchase anything on my new MacBook Pro. Is there a way that I can get the answers emailed to me or reset them?

    I can't remember the answers to my security questions because I made the account like 10 years ago. Because of this I can't purchase anything on my new MacBook Pro. Is there a way that I can get the answers emailed to me or reset them?

    Reset Security Questions
    Frequently asked questions about Apple ID
    Manage My Apple ID
    If all else fails:
    Go to: Apple Express Lane;
    Under Product Categories choose iTunes;
    Then choose iTunes Store;
    Then choose Account Management;
    Press Continue;
    Now choose iTunes Store Security and answer the bullet questions, then click Continue;
    Sign in with your Apple ID and press Continue;
    Under Contact Options fill out the information and advise iTunes that you would like your security/challenge questions reset;
    Click Send.
    You should get a response within 24 hours by email.

  • ICloud got deleted off my MacBook Pro. Is there any way to get it back? I have an iphone now and actually have a use for it.

    iCloud got deleted off my MacBook Pro. Is there any way to get it back? I have an iphone now and actually have a use for it.

    Your signature says you have 10.6.8 - is this correct? (It it isn't please amend it to prevent confusion).
    Assuming Snow Leopard, iCloud has not been deleted - it was never there. The minimum requirement for iCloud is Lion 10.7.2 (Mountain Lion preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is non non-functional - you cannot now open or access a MobileMe account.
    You can set Snow Leopard up to access the email on an existing iCloud account which has been set up on a compliant device, and you may be able to sync iCal using an unsupported (and possibly unreliable) hack, but no other facilities will work. You cannot open an iCloud account on Snow Leopard.
    This page outlines the limited use you can make of an existing iCloud account with Snow Leopard:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudSL.html
    To make full use of iCloud you will have to upgrade your Mac to Lion or Mountain Lion, provided it meets the requirements.
    The requirements for Lion are:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    To purchase it you will have to ring Apple at the number given at the bottom left of this page.
    The requirements for Mountain Lion are listed here:
    http://www.apple.com/osx/specs/
    It is available from the Mac App Store (in Applications). (If you are currently pre-Snow Leopard you will have to upgrade to that to access the Mac App Store: it's available in the online Apple Store.)
    You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

  • I have lost my Macbook Air. Is there any way to track it using its serial number. I did not register it to find my iPhone before.

    I have lost my Macbook Air. Is there any way to track it using its serial number. I did not register it to find my iPhone before.

    If you had no installed http://www.apple.com/icloud/find-my-iphone.html  t
    then no,
    Change any vulnerable credit or bank info that might be got off your macbook.  Have you contacted the authorities about its theft?
    sorry for your loss

  • I have a 13" macbook pro and an 11" macbook air. Is there any way to charge the battery on the air with the power supply of the macbook pro?

    I have a 13" macbook pro and an 11" macbook air. Is there any way to charge the battery on the air with the power supply of the macbook pro?

    If the charging plug fits, use it.

  • Is there a way to bring back the "Open a New Tab" option via right-clicking on the Tab?

    I just upgraded to latest version of Firefox (6.0). Yesterday it informed me that an upgrade to Firefox 5.(something) was available and asked if I wanted to upgrade. I went for it. However, I hadn't used it since then till today. Now when I opened it today it asked me if I wanted to upgrade to version 6.0. Without hesitation, I went for it too.
    While this version looks nice, it feels a bit odd to use it. Previously whenever I wanted to open a new Tab, I right-clicked on any of the Tabs (active tab or any other Tab) and after right-clicking, it had the option to '''''Open a New Tab''''' along with few other options. Now there's no such option. There's the + button to open a new tab, but what if I want to open a link in a new tab by right-clicking on it? Similarly the option to Open in New Window is also missing.
    Is there a way to bring back those previous Tab options/settings? If yes, how?
    P.S. In my bookmark toolbar, when I click on a bookmark icon, it has the same options/settings as it previously had in the last version I used (last version I used was 3.something; while I'd upgraded to version 5.something I hadn't used it except for opening the browser when it asked me to upgrade to version 6.0). Options on right clicking the bookmark icon are:
    Open
    Open in a New Tab
    Open in a New Window
    New Bookmark...
    New Folder...
    New Separator
    Cut
    Copy
    Paste
    Delete
    Properties
    I'd also like to mention here that I know of the shortcut keys; so please don't waste your time by trying to help me that way. Thanks.

    No. The Tab bar is a regular toolbar in current Firefox versions, so you get the normal right-click context menu of a toolbar if you right-click the tab bar.
    You can double click on empty space on the tab bar to open a new tab if you do not want to use the new tab button.<br />
    You can drag a link on that new tab button to open that link in a new tab.<br />
    You can also drag the new tab button on another toolbar if you would like that better.<br />
    Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"<br />

  • The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because

    The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because in the listed applications which can be added below it is not listed.  Thanks!

    If you're a paying Creative Cloud member, you may not see Lightroom in the Creative Cloud if your computer doesn't meet the minimum system requirements. Check to make sure that your system meets the minimum requirements for the latest release of Lightroom.
    If you're using a trial version of Creative Cloud, the Lightroom trial is not available through Creative Cloud. It is, however, available as a stand-alone trial. See Install Lightroom trial | Creative Cloud membership. 
    Please refer to : Lightroom and Creative Cloud FAQ
    Regards
    Rajshree

  • Is there any way I can find out the service record on this mac ?

    I purchased a used QS from an authorized apple dealer at their after boxing day sales event. This QS is extremely quite compared to my polar express MDD.
    Is there any way I can find out the service record on this mac ?
    Somewhere away back when I heard that by knowing the serial number the details of the service record on the given mac could be found. However in those days I only bought new. These days with mac's inability to run applications that require the for real OS 9 ( not classic ) I have to scour the used market. I have some high end audio midi programmes ( for example emagic, cubase VST score ) that do the job and sometimes better then then the OS X versions.

    Hello,
    You can use System.getProperty("SAPSYSTEMNAME"); in your UDF as specified in this thread.
    Get name of XI System in mapping
    Hope this helps,
    Mark
    Edited by: Mark Dihiansan on Apr 27, 2011 7:51 AM

  • One day i went to go get on Photoshop Elemnts 13 and it said i had to pay for it all over again or do a 30 day free trial, i also forgot what my serial number is, so is there a way i can find out what my serial number is by signing in to my adobe Id?

    one day i went to go get on Photoshop Elements 13 and it said i had to pay for it all over again or do a 30 day free trial, i also forgot what my serial number is, so is there a way i can find out what my serial number is by signing in to my adobe Id?

    Make an appointment at the genius bar.
    If you went without an appointment, then it would make sense that you could be turned away.

  • Is there any way to bring back the font type and background of Safari reader from iOS6 in to the iOS7 ? I really miss it, the new design is awful, simple and has now class at all.

    Is there any way to bring back the font type and background of Safari Reader from iOS6 in to the iOS7 ? I really miss it, the new design is awful, simple and has now class at all.

    I agree with you, many things in the ios 6.x were more elegant. The reader was the most one of them. I think the ios7 wants to be the windows 8.

Maybe you are looking for

  • Print Issue - Normal Behavior?

    When using the right click menu in Explorer to print a PDF file, the file prints fine but the Reader (v10.1.3) stays open with no file loaded.  Is there a setting to change this behavior so the program closes when the printing is completed? Thanks, R

  • Desktop files disappeared (advanced user)

    Hello, Main Problem: While working (though not specifically while I was watching, ie: I was cycling through firefox, acrobat reader, outlook 2010, and microsoft word 2010 without viewing the desktop very often) all of the documents on my desktop disa

  • How can I run my doclet from main method?

    I want to run doclet from main method. My source is: command = String.format("%s%s%s%s", "cmd /c ", "% javadoc -doclet ", "ExportJavaLib ", "-private " + dir.getAbsolutePath() + ".java"); Runtime.getRuntime().exec(command);My doclet class file is in

  • Confirm emails are being received

    I am looking for an application like MSGTAG - MessageTag for the Mac as I would be really helpful to know if my email have been received by my clients. Can anyone help. http://msgtag.com/home/

  • Upgrading an 8 year old G4 Desktop on a budget - is it worth it?

    Hi all. I have an 8 year old G4 desktop (with DVD burner) and 17" flat panel display. Both are in immaculate, time capsule condition. After some extensive traveling the last few years, I recently got them out of storage and was hoping to trade them i