My MacBook freezes on the Apple Screen

My MacBook freezes on the Apple Screen. What should i do?

Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk. You could have some directory corruption. Let us know what errors Disk Repair reports and if DU was able to repair them. This could just be a start in repairs and you may need a better utility to finish the job.
Then Repair Permissions.
No need to report any Permissions errors........we all get them.
   DALE

Similar Messages

  • My ipod Classic hangs and freezes on the apple screen.  It will not do anything.  I tried to restore using iTunes, but came out 1415 error code, and cannot do anything about it.

    My iPod Classic which I rarely uses.  I try to refresh it and put new song into it.
    As I try with iTunes, it runs very slow and show that it had problem, need to restore it.
    When I tried, it will not and hangs, also slows my HP Win 7 system immensly.
    I tried to reset, pressing the middle and menu botton, now it hangs on the apple screen and remains there forever.
    What is the problem and how can I solve it?

    The screen is telling you to connect the iPod to your computer and restore via iTunes.
    iTunes: Backing up, updating, and restoring iOS software

  • My ipod froze on the apple screen

    When i turn on my ipod it freezes on the apple screen.  when I restore I get error code 3194.  any suggestions?

    hook it up to your computer then try to put the device into DFU Mode by holding down the power button for 5 seconds, without releasing the power button hold down the home button for 10 seconds, release the power button but don't release the home button for 15 seconds. once it is in DFU mode click iPod touch then click restore

  • I have a MacBook Pro 13.3 OS- MAC OS X LION.Whenever I am staring the computer, it says You need to restart your computer by pressing the power button.I did this number of times and everytime it freezes to the same screen.Solution needed urgently pls.

    I have a MacBook Pro 13.3 OS- MAC OS X LION.
    Whenever I am staring the computer, it says You need to restart your computer by pressing the power button.
    I did this number of times and everytime it freezes to the same screen.Solution needed urgently pls.
    Thank you for any help in this regard that comes fast.

    The details of the kernel-panic report is as follows-
    Interval Since Last Panic Report:  1458653 sec
    Panics Since Last Report:          6
    Anonymous UUID:                    70BA6A**************************************************
    Sun Sep 16 23:00:13 2012
    panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff8000290560, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0x0000000000800028, CR3: 0x000000000a509005, CR4: 0x00000000001606e0
    RAX: 0x0000000000000001, RBX: 0x0000000000820000, RCX: 0xffffff801122dc40, RDX: 0x0000000000020501
    RSP: 0xffffff80ef3d3da0, RBP: 0xffffff80ef3d3dc0, RSI: 0x000000002b1d78b6, RDI: 0xffffff800342d280
    R8:  0xffffff80ef3d3f08, R9:  0xffffff80ef3d3ef8, R10: 0x000000010d901000, R11: 0x0000000000000206
    R12: 0xffffff800342d280, R13: 0x0000000000000000, R14: 0xffffff8011cd6500, R15: 0x0000000000800000
    RFL: 0x0000000000010206, RIP: 0xffffff8000290560, CS:  0x0000000000000008, SS:  0x0000000000000000
    CR2: 0x0000000000800028, Error code: 0x0000000000000000, Faulting CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff80ef3d3a50 : 0xffffff8000220792
    0xffffff80ef3d3ad0 : 0xffffff80002c4794
    0xffffff80ef3d3c80 : 0xffffff80002da55d
    0xffffff80ef3d3ca0 : 0xffffff8000290560
    0xffffff80ef3d3dc0 : 0xffffff800026c9c3
    0xffffff80ef3d3f40 : 0xffffff80002c3fbb
    0xffffff80ef3d3fb0 : 0xffffff80002da481
    BSD process name corresponding to current thread: fsck_hfs
    Mac OS version:
    11E2620
    Kernel version:
    Darwin Kernel Version 11.4.2: Wed May 30 20:13:51 PDT 2012; root:xnu-1699.31.2~1/RELEASE_X86_64
    Kernel UUID: 25EC645A-8793-3201-8D0A-23EA280EC755
    System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
    System uptime in nanoseconds: 4850001132
    last loaded kext at 1796984176: com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.7f2 (addr 0xffffff7f80e16000, size 57344)
    loaded kexts:
    com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.7f2
    com.apple.driver.AppleUSBTCButtons    227.6
    com.apple.driver.AppleUSBTCKeyEventDriver    227.6
    com.apple.driver.AppleUSBTCKeyboard    227.6
    com.apple.driver.AppleIRController    312
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    33
    com.apple.iokit.SCSITaskUserClient    3.2.1
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCISerialATAPI    2.0.3
    com.apple.iokit.IOAHCIBlockStorage    2.0.4
    com.apple.driver.AppleFWOHCI    4.8.9
    com.apple.driver.AirPort.Brcm4331    560.7.21
    com.apple.driver.AppleSDXC    1.2.2
    com.apple.driver.AppleUSBHub    5.0.8
    com.apple.iokit.AppleBCM5701Ethernet    3.2.4b8
    com.apple.driver.AppleEFINVRAM    1.6.1
    com.apple.driver.AppleSmartBatteryManager    161.0.0
    com.apple.driver.AppleAHCIPort    2.3.0
    com.apple.driver.AppleUSBEHCI    5.0.7
    com.apple.driver.AppleUSBXHCI    1.0.7
    com.apple.driver.AppleACPIButtons    1.5
    com.apple.driver.AppleRTC    1.5
    com.apple.driver.AppleHPET    1.7
    com.apple.driver.AppleSMBIOS    1.9
    com.apple.driver.AppleACPIEC    1.5
    com.apple.driver.AppleAPIC    1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient    195.0.0
    com.apple.nke.applicationfirewall    3.2.30
    com.apple.security.quarantine    1.3
    com.apple.security.TMSafetyNet    8
    com.apple.driver.AppleIntelCPUPowerManagement    195.0.0
    com.apple.driver.AppleUSBBluetoothHCIController    4.0.7f2
    com.apple.iokit.IOBluetoothFamily    4.0.7f2
    com.apple.driver.AppleFileSystemDriver    13
    com.apple.driver.AppleUSBMultitouch    230.5
    com.apple.driver.AppleThunderboltDPInAdapter    1.8.4
    com.apple.driver.AppleThunderboltDPAdapterFamily    1.8.4
    com.apple.driver.AppleThunderboltPCIDownAdapter    1.2.5
    com.apple.iokit.IOUSBHIDDriver    5.0.0
    com.apple.driver.AppleUSBMergeNub    5.0.7
    com.apple.driver.AppleUSBComposite    5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.1
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.driver.AppleThunderboltNHI    1.6.0
    com.apple.iokit.IOThunderboltFamily    2.0.3
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.1
    com.apple.iokit.IOFireWireFamily    4.4.5
    com.apple.iokit.IO80211Family    420.3
    com.apple.iokit.IOEthernetAVBController    1.0.1b1
    com.apple.iokit.IONetworkingFamily    2.1
    com.apple.iokit.IOUSBUserClient    5.0.0
    com.apple.iokit.IOAHCIFamily    2.0.8
    com.apple.iokit.IOUSBFamily    5.0.8
    com.apple.driver.AppleEFIRuntime    1.6.1
    com.apple.iokit.IOHIDFamily    1.7.1
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    177.5
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.driver.DiskImages    331.7
    com.apple.iokit.IOStorageFamily    1.7.2
    com.apple.driver.AppleKeyStore    28.18
    com.apple.driver.AppleACPIPlatform    1.5
    com.apple.iokit.IOPCIFamily    2.7
    com.apple.iokit.IOACPIFamily    1.4

  • Macbook won't shut down or restart. it freezes at the blue screen.

    first time this happened i didn't notice. But then everytime I shutdown my macbook it freezes at the blue screen until all the battery is dranged, so I have to shut it down by pressing the button. Then I tried to restart it and the same thing happened!
    I don't remember downloading any new apps that night that might have caused this.
    please help.
    Mac OS X 10.6.7

    Hi. Try these steps.
    http://support.apple.com/kb/ts1545
    Good luck!

  • My iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat,  every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats??

    hello my name is kirstie, i updated to firmware 4.2.1 .....my iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat,  every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats the same problem?? (if i turn the phone off my pressing the two buttons it wont keep rebooting, its only when i leave it after turning it on)
    I have reset the phone, full firmware restore, even downgraded back from firmware 4.2.1 to .3.1.3 official by using dfu mode and still doesnt fix.
    (i correctly got out of dfu mode after the downgrade)
    i can enter dfu mode and recovery, and update through itunes with no problem, but it doesnt fix the problem,
    i have searched and found no answer to this problem, every option availible to try that i know of i have tried and failed. i dont care about preserving my content i just want a fix. i have a good understanding how to operate software on a computer and shouldnt be too confused by any advice given, so plz even if the answer is very complex i wish to try anything, please help me to get my iphone working.

    Anyone have any suggestions? or is everyone else just as clueless as me !

  • I have a powerbook G-4 15 inch, It wont boot up and the display only works on the first try. it gets to the apple screen and freezes, when i try to restart theres no display. Help please, whats the issue here?

    I left it running over night, it was running perfectly, in the morning the screen was black. i tried to restart it and got no display but i can hear the machine running. so i put away for several months, plug it in, charge the battery, it boots, i have a display, it loads the desktop and freezes. when i try to restart it theres no display. the last time i tried, i started it, i got to the apple screen and nothing. whats the issue here? please help.

    Will it boot OK in Safe Mode? See What is Safe Boot, Safe Mode? (Mac OS X)
    http://docs.info.apple.com/article.html?artnum=107392 Takes a while to run, but it usually "fixes" problems.
    Safe Boot takes longer than normal startup
    http://support.apple.com/kb/TS1884?viewlocale=en_US
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck
    http://docs.info.apple.com/article.html?artnum=106214
     Cheers, Tom

  • Hi, when powering up my macbook pro, when the apple symbol appears the screen flashes pink, can anyone advise whats up?

    Hi, when powering up my macbook pro, when the apple symbol appears the screen flashes pink, can anyone advise whats up?

    You can try a system reinstall:
    Reinstalling Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • HT201412 my iphone is not turning on its freeze on the black screen with the apple logo.Please help me guys iam fed up please its a humble request

    my iphone is not turning on its freeze on the black screen with the apple

    - Try a reset.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Then connect to your computer and try to restore.
    - See if placing the iPod in recovery mode will allow a restore. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    - If the logo still show all the time, let the battery fully drain. After charging for an hour try the above again.

  • Mac freezes on the apple startup screen?

    My iMac 24 inch freezes on the apple startup screen, then it takes along time for the cog wheel to start turning, and then that's all you'll get untill you switch off. I've fixed permissions and erased and reinstalled but still same issues, any ideas for what to do next????

    If you can afford to erase everything again...
      1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
       2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
          *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
       3. Click the Erase tab.
       4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
       5. Select your Mac OS X volume.
       6. Highlight the drive, select Partition Tab, then Format type... MacOS Extended Journalled, select the Security Options button, choose Zero Out Data, Erase... after completion hopefully you'll be able to get a good install.
    Or...
    Boot off your *original* Install Disk while holding down the *d key*, (not c key), then run the extended Apple Hardware Test. Some disks require you to use the Option key at bootup to select AHT.
    The Memory test can really only be trusted if it finds a problem, not if it doesn't find a problem.
    Memtest OS X...
    http://www.memtestosx.org/joomla/index.php
    Rember is a freeware GUI for the memtest ...
    http://tech.kateva.org/2005/10/rember-freeware-memory-test-utility.html

  • While doing a non-iTunes upgrade to 8.02 my iPad froze on the apple screen. After hours of waiting I forced a power off. Froze in same place. Tried attaching to iTunes on PC from power off. Freezing in same place. Any ideas?

    While doing a non-iTunes upgrade to 8.02 my iPad froze on the apple screen. After hours of waiting I forced a power off. Froze in same place. Tried attaching to iTunes on PC from power off. Freezing in same place. Any ideas on how to get past this so that I can at least run a restore?

    I Don't know that recovery mode would work, but did you try it?
    If you can't update or restore your iPhone, iPad, or iPod touch
    IF that fails, have you considered erasing the device using Find my iPhone in iCloud.com? I'm not sure what good that would do either of the iPad continues to freeze, but if nothing else is working .....

  • My ipod only goes to the apple screen and freezes then turns off after about a minute. Is this fixable?

    My ipod only goes to the apple screen and freezes then turns off after about a minute. Is this fixable?

    Try a system reset.  It's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.

  • Hi i recently bought 8gb of ram and installed it in my mid 2010 13' macbook pro, but whenever i start my computer it freezes at the apple sign in the startup. I just put back my default 4gb of ram back into my computer and it runs fine. Any suggestions?

    Hi i recently bought 8gb of ram and installed it in my mid 2010 13' macbook pro, but whenever i start my computer it freezes at the apple sign in the startup. I just put back my default 4gb of ram back into my computer and it runs fine. Any suggestions?

    jamiesfromportland, greetings:  I do not take issue with your very valid reasons for purchasing RAM from Apple.  However by recommending not to purchase RAM from third party vendors I would suggest is unfounded advice.  Most of the problems that occur with third party RAM are attributable to the lack of adherence to the required specifications, viz. this post.
    I would be willing to wager that purchasing RAM from reputable vendors such as OWC or Crucial one would find similar fail/success ratios as those purchased from Apple.  In both cases this assumes that the specifications are adhered to.
    I have always purchased RAM upgrades from third party vendors with no performance issues.  True that I do so to save money but I do not skimp on quality.
    Ciao.

  • My macbook air wont go past the apple screen with the loading circle.

    My Macbook air (Early 2008 edition) Boots up fine, but it stays on the apple screen with the loading circle for a few minutes and then shuts down. I did the Command+v and it always stops at the same spot with:
    disk0s2: I/0 error.
    (see picture)
    I have already tried pretty much all the commands while booting up possible, and to no avail.
    Please help.

    Sorry for delay been super busy at work - have you tried to boot to your operating sytem disc - by inserting the disc  - then power down the unit - then power it up again while holding down the C key until you see the gear start spinning.  Once it comes up - go to utilities at the top of the screen - then disc utility - then selcet your hard drive in the left hand pane and then on the right hand pane select first aid and click verify disk in the lower right hand corner - your hard drive may be failing and this test will let you know if that is the case. If so you need to backup your hard drive - replace it and put your data back on the newly placed drive.  - please let me know how the verify disc goes

  • My Macbook wont load past the apple screen.

    ok so I have a macbook from late 2007 and it's not loading past the apple screen. Yesterday it froze so decided to turn it off and it hasnt started up since. Ive tried safe mode, resetting the NVRAM/PRAM, and then i decided to restart it and press command v and a screen popped up saying.
    npvhash=4895
    PRE enabled
    64 bit mode enable
    darwin kernel version 18.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/release_1386
    vm_page_bootstrap: 246299 free pages and 15845 wired pages
    standard timeslicing quantum is 10000 us
    mig_table_max_displ = 73
    AppleACPICPU: Processor Id=0 LopicId=0 Enabled
    AppleACPICPU: Processor Id=1 LopicId=1 Enabled
    calling mpo_policy_init for TMSafetynet
    Security policy losded: Safety net for Time Machine (TMSafetyNet)
    calling mpo_policy_init for Quarantine
    Security policy Loaded: Seatbelt sandbox policy (Sandbox)
    Copyright (c) 1982, 1986, 1989, 1991, 1993
         The Regents of the University for Californai. All Rights reserved.
    MAC Framework successfully initialized
    isong 5242 buffer headers and 4096 cluster 10 buffer headers
    IOAPIC: Verdion 0x20 Vectors 64:87
    ACPI: System state [so s3 s4 s5] (s3)
    PFM64 0xf10000000, 0xf10000000
    [ PCI configuration begin ]
    PCI configurstion changed (bridge=1 device=1 cardbus=0)
    [ PCI configuration end, birdges 4 devices 17 ]
    AppleIntellCPUPowerManagement: (built 16:44:45  Jun  7 2011)ninitialization complete
    mbinit: done (64 MB memory set
    for mbuf pool)
    FireWire (OHCI) Lucent ID 5811 built-in now active, GUID 001cb4fffe8bb384; max speed s400.
    rooting via boot -uuid from /choosen: 49342205-A733-3921-9F2C-4D88EAA7EB64
    Waiting on <dict ID="0"><key><string ID="1">[0Resources</key><string ID= "1">I0ResourceMatch</key><string ID= "2">boot -uuid-media-</string></dict>
    com.apple.AppleFSCompressionTypeZlib Kmod start
    com.apple.AppleFSCompressionType L\load succeeded
    appleIntelCPUPowerManagementClient : ready
    Got boot device = IOService:/AppleCPIPlatformExpert/PC1000/AppleACPIPCI/SATA@1F ,2/AppleAHCI/PRT2@2/I0AHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice /
    IOBlockStorageDriver/ST980811AS Media/IOGUIDPartitionScheme/Untitled 102
    BSD root: disk0s2, major 14, minor 2
    [Bluetooth: :CSRHIDTransition] switchToHCIMode (legacy)
    [Bluetooth: :CSRHIDTransition] transition complete.
    CSRUSBBluetoothHCIController: :setupHardware super returned 0
    AppleYukon2: Marvell Yukon Gigabit Adapter 88E8053 Singleport Copper SA
    AppleYukon2:RxingSize <= 1024, TxRingSize 256, RX_MAX_LE 1024, TX_MAX_LE 768, ST_MAX_LE 3328
    disk0s2: 1/0 error.
         0 [level 3] [ReadUid 0] [Facility com.apple.system.fs] [ErrType 10] [ErrNo 5] [10Type Read] [PbnukNum 50624960] [LblkNum 8] [FSLogMsgID 142858201] [FSLogMsgOrder First]
         0 [level 3] [ReadUid 0] [Facility com.apple.system.fs] [DevNode root_device] [MountPt /] [Path /usr/lib/dyld/ . .namedfork/rsrc] [FSLogMsgID 1462858201] [FSLogMsgOrder Last]
    /SourceCache/AppleFSCompression/AppleFSCompression-24.4/Common/commonUtilsKern.c :344: VNOP_GETXATTR com.apple.ResourceFork for /usr/lib/dyld: 5: error
    /SourceCache/AppleFSCompression/AppleFSCompression-24.4/Compressors/Type4/Compre ssorType4Imp.c.304: fh_getxattr /usr/lib/dyld: 5: error
    /SoundCache/AppleFSCompression/AppleFSCompression-24.4/Common/commonUtils.c:223: supplyChunk: error
    decmpfs.c:1149:decmpfs_pagein_compressed: err -1
    CODE SIGNING: cs_invalid_page(ox7fff5fc22000): p=1[launchd] clearing CS_VALID
    Sleep prevented by SB 1, SS 0, RS 1

    reading this, your hdd has unfortunately died. have you backed your system up? if you have it is not as bad as it seems.
    you will have to buy a new drive and simply restore to that drive from the backup.

Maybe you are looking for

  • SQL SELECT with GROUP BY: Retrieve records for a list of customers

    I need to write a SQL statement to retrieve a list of customers, which are in two tables of different natures, say T1 and T2. The customer is a FK in both tables. Both tables have a column which is the date of an order. INPUT: * list of customers, sa

  • When is Oracle 10.1.0.4 patchset available?

    Hi, Can someone tell me when the 10.1.0.4 patchset will be available please? Cheers, Warren

  • SDO_RELATE does not return expected points

    Hi, I have a problem with a query which does not return the results I am expecting. I think it may be to do with geodetic data v projected data but fail to see how. the table points2 contains point data stored in Lat Long (SRID 8307) Here is my query

  • Uninstalling Photoshop Elements 4.0

    I recently crashed my XP computer but used system restore discs to bring back all (?) the files.  Neither photoshop elements 4.0 nor Audition 2.0 will open, although the programs are in their pre-crash locations. I would try to uninstall and reinstal

  • Error: Expected a field name after '.' operator

    I'm trying to use a "for" loop to add an "onRelease" handler to my symbols using the following code, but I get error that says: Expected a field name after '.' operator. Any idea what's wrong and how I can fix this? for (i=1; i<10; i++) { thumbs_mc.t