My macbook freezes whenever I connect external HDD or USB pen.

My macbook freezes everytime I plug my USB pen or my external HDD, however if I reboot it and keep the USB pen/ext HD plugged it will work just fine.
Can you guys help me because it's really frustrating having to turn the computer off everytime I need to copy sth to my USB pen/Ext HDD.
Many thanks.

Hi fol10,
If you are having unusual USB behavior, you may want to start by resetting the System Management Controller (SMC) and PRAM, as outlined in the following articles
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple-support
OS X Mavericks: Reset your computer’s PRAM
You may also want to see if this behavior happens with every USB port on the Mac, or just a specific one.
Regards,
- Brenden

Similar Messages

  • Is it possible that iMac corrupts connected external hdd-s drive via USB?

    Is it possible that iMac corrupts connected external hdd-s drive via USB? (two wd cav. green 2tb from different purchase went down in one day, both from the backside usb ports)
    First one of my video storage hdd, full of files suddenly got extremely slow, and a few minutes later, it unmounted itself, but with the unmount error, but nobody even touched the cables, electricity etc. When I tried to mount it again, it did not respond, just give a periodical load light and ticking. First I thought it must be hardware failure, but since I bought a brand new drive today and it made the same problem as soon as I tried to format it. I got suspicious. The consol, said about these - i googled all but now solution so far. (WesternFresh is my drive)
    Oct 23 17:10:58 xxxx fseventsd[47]: disk logger: failed to open output file /Volumes/WesternFresh/.fseventsd/636573acca1d6550 (No such file or directory). mount point /Volumes/WesternFresh/.fseventsd
    Oct 24 10:55:42 xxxx com.apple.kextd[10]: Can't create kext cache under / - owner not root.
    Oct 24 17:23:05 tmdc diskarbitrationd[16]: unable to probe /dev/disk1 (status code 0xFFFFFFFA).
    and there was an I/O faliure not but it was on another mac - where i hoped itt will come back to live.
    I think - if it is possible - that the OS maybe misunderstand something about these drives, and try to change - maybe permissions - all the time if a usb external connects...? (I am not really into it as you see )
    Also about Disk Utility - it does not see any partition on the old hdd, but i shows the name of the product. If I connect the new hdd via the keyboard usb, the disk utility is able to see and format it, but the hdd will be still slow and tikking after it.
    Also I tried Disk Warrior (freezd out) and Techtool Pro 6 thanks to some ol'frineds - which also not saw the old hdd, but did nothing useful with the new one.
    About cav green: I have 3 of them and no error so far, and got 4 1tb cav green in 2 mybook studio II also without any problem.
    Iam a bit scared, and try not to plug in any usb hdd-s now, but I have to continue work, so I need solutions.
    I hope if it is not hardware failure, maybe some tricky terminal code will bring back the viability of my old hdd - and I won't have to spend a lot of money to recover data.
    strange.
    if anybody has a clue?
    update 1:
    i found this post also:
    https://discussions.apple.com/message/15905481#15905481
    I also made the mentioned steps - but it is a bit different sice it reproduce itself and I cant use DU.

    It turned out that WD is the big bad guy in this game.
    According the data rescue company where I asked for an inspection, both of the drives had their reader head loose. And in the one, which was my already-in-use disk its even damaged the platters... xxxxx
    So its time to pay bunch of money to recover, and take a walk to wd service to bang on the desk.
    Also note - it may be somehow related to intellispeed technology - since macs not really friendly with wd-s built-in solutions.
    On the other hand, with WD GP 1Tb there is no problems at all for ages.
    thanks guys, thread is closed

  • How do I FTP files from a security camera to iCloud so they can be retrieved back to my MacBook Pro whenever I connect when travelling?

    How do I FTP files from a security camera to iCloud so they can be retrieved back to my MacBook Pro whenever I connect when travelling?
    Russ

    Do you want to watch the live feed of your secutiry cameras or recorded footage?
    In either case, I don't think iCloud is your solution.
    For the first one, check with your security camera software, they usually have this option of broadcasting, so you'll know how to access it.
    For the later, you should use something like Dropbox (www.dropbox.com), since iCloud file sharing is, up to this date, app restricted.
    Hope it helps.
    JP

  • How can i Transfer Photos from iPad to an external hdd or USB drive?

    Hey everyone,
    Do you Know how to Transfer Files and especially Photos from the iPad to an external hdd or USB drive? I ll Be travelling for a Long Time and Wont take my MacBook with me, only the iPad, the Camera and an external hdd to Save Photos and Videos from the Camera. Thanks.
    Best Wishes,
    Nick

    You can't - external drives and flash drives can't be connected to the iPad for copying photos (or anything else) off the iPad. You can use some photo upload sites to store them on web accounts or cloud services, but for a large number of photographs you'll be better off with a laptop and external drives for backup.

  • I have a MacBook, iPhone, Airport Extreme and external hdd. What is my best option to stream my music and movies to my hifi set and TV without having to turn on my MacBook?

    I would very much like to store all my movies and music on my external HDD, which is connected to an Airport Extreme. Could for example Apple TV access this HDD and stream either music to my hifi system or video to my tv, without having to turn on my MacBook or iTunes? And use my iPhone to control everything?

    About Wake on Demand and Bonjour Sleep Proxy
    When a Mac computer is in sleep mode, it can continue sharing services, such as iTunes and iPhoto library sharing, printer sharing, file sharing, and screen sharing.
    http://support.apple.com/kb/ht3774

  • Twin unpowered USB hub for connecting external HDD and iphone

    I have a MBA and a powered Kensington 7 port USB hub which works great when I am either at home/in the office.
    Is there an unpowered twin port USB hub that would allow me to connect both my WD myv passport 320gb external HDD and 3g iphone to my MBA when i am truly on the move?
    thanks in advance
    Message was edited by: NRG1970

    Because those are both drawing power from the macbook air, it might be questionable, but any should do, but I haven't seen any 2 port hubs, only four port ones, and I tend to like Logiix, as their support is good and their products are good also, and they are fairly low profile.

  • HT1349 very slow external HDD and usb drive connected to Apple Extreme Router

    Hello
    So I got a western digital USB drive (500gig) and western digital Live 2TB.
    I bought a new Apple Extreme router and connected them both.
    USB drive and external hdd (WD Live 2TB) very slow when connected to Apple Extreme Router, using Lion 10.7 and updated both firmware for router, western digital and Airport Utility.
    Slow means, it takes half an hour to copy 200 Mb of file to the WD Live 2TB, and its connected to my router with a gigabit ethernet cable!
    Is someone else having the same problem, I thought even over usb I should get around 2-5mb range.
    I am using Macbook Pro and 802.11n with Lion 10.7.2
    Please Help

    The USB WD 500 gig is connected to the Airport Extreme using a non-powered USB 2.0 hub, only two things a HP printer and the 500 gig is connected through it. I already formatted it to MAC OS Extended Journalled. ANd I think the speed didnt change.
    For the WD 2TB Live I didnt format it to anything, started using it out of the box. I just updated its firmware. I was having the same speed even when I directly connected it to my Mac Book Pro using ethernet gigabit cable.
    This WD 2TB Live doesnt have any USB 2.0 or USB 3.0 connectors, just the ethernet cable. I wasnt planning to carry it around. Just wanted to use it as a good ol NAS. So then I saw the fix somewhere and connected to this drive via AFP,  afp://MyBookLive._afpovertcp._tcp.local/Public and it become suddenly very fast. Just like how it should be, I easily copied 20 gigs in around 20-25 minutes. (This was dirctly connected to my computer)
    So then I thought my problem is solved and disconnected my WD Live and connected it back to the Apple Router again, and the speed became very slow again. Now both the USB 500 gig and this 2TB Live are slow.
    Time machine is also very slow.
    Thing is I also have a linux and windows machine(in repair, but should be up soon), Since apple is the newest computer I have, I want to make it work on this first. I dont want to use the MACosx journaled on the 2TB right now. Besides formatting the USB 500 gig to this format didnt help with my speed. So the problem can be elsewhere.
    - I will try to get a powered USB hub as woodmeister50 suggested.
    - I dont know how to connect via iCloud as cigame suggested
    Please let me know if you guys have any suggestions. I have tested and returned enough routers in past few weeks. I really want it to work on this combination LionOSX + Airport Extreme + WD Live.
    Thanks

  • MacBook freezes whenever I let it alone a few minutes

    This is happening to both of our MacBooks. Whenever we leave the computer for a few minutes, and then come back, the display is frozen, and the keyboard and trackpad are unresponsive. The cursor is stuck, doesn't move. If I hook up the mouse, the cursor works, and I can put the computer to sleep. After waiting a few seconds, I can wake it up and everything works fine again. This was happening a few times a month, now it's happening EVERY time I leave the computer for a few minutes. The utilities Disk Aid says the disk is working properly. Seems like a software conflict but how can you test for that? The computer never freezes while I'm working on it, only when I've stepped away for a couple minutes.

    I'd call appe it sounds like a probpem with your optical drive but you can try zapping the pram and resseting the PMU,and mine as well try a firmware reset
    PMU reset-unplug power adapter and take out battery then hold power button for 7 seconds
    PRAM zap- http://docs.info.apple.com/article.html?artnum=2238
    FirmWare reset-shut down computer press power button and keep holding it till you here a loud beep

  • Help connecting external HDD to AT300 tablet.

    I want to know if and how it would be possible to connect an external HDD to a AT300 tablet.  Both the tablet and the HDD have micro usb ports, but I can not locate a micro to micro cable online.  Am I completly wrong about this even being possible?  Any help would be great.
    Thanks in advance.

    For a flash drive, you use a thing callled a USB "OTG" ("On-the-Go" or "host mode") cable. If you search the forum you can find a previous post with some good hints how to find one of these.
    Cannot say I've ever tried my AT305 with a hard disk--as opposed to a flash drive. I'd be concerned about current supply capability for some of the larger capsacity ones (many of which draw more than the USB is specified to provide and some hosts have more headroom above the spec than others). I'd also be concerned that some disk formats might not work with Android. I'm sure it's documented somewhere which ones do and which ones don't. But some research would be in order before betting this will work painlessly first time.

  • Connect external hdd

    connect external ndd to imac

    I have an early 2011 macbook pro 8,2 , that doesnt recognize my lacie rugged external hard drive using thunderbolt. Usb works great. Y tried update, other cable, smc and pram reset. But nothing works. Any suggestions?

  • TG797n v3 dropping connection after connecting External HDD

    Hi All, I have a Seagate SRD00F2 external HDD that I'd like to network on the TG797n v3. Problem is, as soon as I connect it the whole modem starts to drop out and reboot itself. The HDD has an external power supply, but not a switch to power it up. After reading some other posts I'm concerned that this hard drive still needs USB power as well which is causing the modem to crash/reboot. Would a powered USB hub be sufficient to connect the two devices, or do I need to change my external hard drive? Product suggestions would be appreciated.

    hey , Thats' a 2 TB harddrive, right? Which of the ports on the TG797 do you have it connected to - the back, or the side? I'm a tad confused, because the Seagate has it's own power supply, and you should not need a powered hub as well. I know some people have had issues, because IIRC, this is a USB3 drive. So some steps I suggest - run a test on the Seagate drive by connecting it to a PC and run the Seagate diagnostics (download them from Seagate), just to eliminate the drive as havig an issueTry a different port on the ModemTry a different USB drive as well, as I doubt the modem will like the separate hub, for instance As an aside,  after the modem reboots, does it "see" the Seagate drive, or does the TGN797 continue to misbehave?   

  • Can I connect an additional External HDD through USB?

    Hi,
    I would like to know if it's possible to connect an additional external HDD to the Time Capsule and share it like on the AirPort Extreme with "Hard Drive Sharing".
    I think it's called an AirPort Disk, through USB.
    Thanks!

    I had two drives, two printers and a powered USB hub. The best I ever got the AEBS to read was the two printers and one drive. I haven't tried it yet with the Time Capsule as the hard drive onboard made the the other two expendable.
    I still do have access to the secondary drive but am in the middle of an archive of the time capsule as there's something wrong with the Time Capsule drive or directory. Once I get that straightened out I will test two drives in the hub and see if Time Capsule is any better suited to multiple externals.
    Message was edited by: John Teeter

  • HT4106 Will this thing support if I connect external HDD's or Flash drives to watch movies or transfer photos?

    I'm very interested in purchasing this accesory for my camera but I would like to maximize it's usage. I wanna know if the camera connector (via the usb port) will support if I connect, say, flash drive or external hdd. I want to know if I can watch movies directly from the hdd/flash drive instead of buying an app to stream

    Theoretically you can put movies and videos onto an SD card, satisfy the naming requirements - all files in a DCIM folder and with a name of exactly 8 characters. Then you can use the photo app to import that video file onto your iPad, watch it and delete it.
    Does require that you have the room to import....so it's not perfect but it does work.
    but if you want to watch a lot of movies and video files, the seagate is probably the best way to go since you can keep tons more than what fits on a 4-32 gig card (which start to get pricey after a bit)

  • Leopard crashes when connecting external HDD

    Hi all,
    I bought my MacBook Pro 2.6 GHz Intel Core 2 Duo about 3 months ago and about a month ago I also bought as external 2.5 Freecom toughdrive 250GB HDD. I used this for the Time Machine and for about a month everything was working perfectly. However about 10 days ago while working the system crashed, I got the usual Gray box with 'You need to restart you computer. Hold down the power button for several seconds or press the restart button'
    After several attempts I came to the conclusion that the system crashes when the external HDD is mounted. So, I though it was the time machine that was causing this crash and I erased the external HDD and switched off the Time machine, but unfortunatly that did not help either, still even tough the external HDD is erased and clean, every time I mount it, after about 5 minutes the system crashes and I have to restart it by holding down the power button.
    Has anyone had this problem? can someone help?
    Thanks in advance
    Alex

    Hi Jeff,
    Tried that but to no luck, it still crashed after about 5 minutes!
    Below is the report I get when I restart the system, I don't know if anyone can figure this one out?
    Tue May 13 01:54:42 2008
    panic(cpu 1 caller 0x001A8C8A): Kernel trap at 0x005d2fab, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x00000010, CR3: 0x01439000, CR4: 0x00000660
    EAX: 0x00000000, EBX: 0x05a1b300, ECX: 0x05805c00, EDX: 0x00000001
    CR2: 0x00000010, EBP: 0x349d3f08, ESI: 0x05805c00, EDI: 0x00000000
    EFL: 0x00010202, EIP: 0x005d2fab, CS: 0x00000008, DS: 0x00000010
    Error code: 0x00000000
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x349d3cf8 : 0x12b0f7 (0x4581f4 0x349d3d2c 0x133230 0x0)
    0x349d3d48 : 0x1a8c8a (0x461720 0x5d2fab 0xe 0x460ed0)
    0x349d3e28 : 0x19ece5 (0x349d3e40 0x0 0x349d3f08 0x5d2fab)
    0x349d3e38 : 0x5d2fab (0xe 0x48 0x10 0x10)
    0x349d3f08 : 0x62185a (0x5a1b300 0x5805c00 0x0 0x0)
    0x349d3f58 : 0x5d91e9 (0x5a1b300 0x26a56a83 0x349d3f78 0x1a236f)
    0x349d3f78 : 0x13ea4a (0x5a1b300 0x0 0x0 0x0)
    0x349d3fc8 : 0x19eadc (0x0 0x0 0x1a20b5 0x4c11de0)
    Backtrace terminated-invalid frame pointer 0
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.iokit.IOSCSIBlockCommandsDevice(2.0.2)@0x617000->0x62cfff
    dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(2.0.2)@0x5cf000
    dependency: com.apple.iokit.IOStorageFamily(1.5.2)@0x5ff000
    com.apple.iokit.IOSCSIArchitectureModelFamily(2.0.2)@0x5cf000->0x5e6fff
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    9C7010
    Kernel version:
    Darwin Kernel Version 9.2.2: Tue Mar 4 21:17:34 PST 2008; root:xnu-1228.4.31~1/RELEASE_I386
    System model name: MacBookPro3,1 (Mac-F4**BC)

  • My macbook slows down after using external HDD

    When I use an external drive via usb, my computer really slows down giving me no choice except reboot.
    I watched memory usage with activity monitor. Free memory decreases  by time and inactive memory increases with the same amount and others  don't change much. If I continue using -esp. reading-, free memory comes  below to 100MB and then increases a bit -I think it starts paging  =other applications' memories= to system disk-, then continues to  decrease. Closing the application -that use the external- do not relese  memory from inactive to free but ejecting the external does. After  unplugging and trying to use the other applications, I face very  sluggish performance so that rebooting becomes a better-fast choice.  Both NTFS and FAT partitions produce the same result and I don't have  any other partition.
    If I try to re-read the same file after the external drive stops  spinning (sleeps), it does not start spinning but trying to read another  file makes it start spining. This makes me think about some -overdone-  caching problem, but don't know what causes it and how to turn it off  (Tuxero's caching is already disabled in the preferences, although I  think it is only for writing only).
    I made some research and found nothing specific; they tell to  reinstall the os or format the drive -to HFS+ -. What is causing this?
    Note: All of my drives are in Spotlight's exclusion (privacy) list and using another usb slot did not change a thing.
    My EtreCheck is:
    EtreCheck version: 1.9.11 (43) - report generated June 15, 2014
    Hardware Information:
        MacBook Pro (13-inch, Mid 2009)
        MacBook Pro - model: MacBookPro5,5
        1 2.26 GHz Intel Core 2 Duo CPU: 2 cores
        4 GB RAM
    Video Information:
        NVIDIA GeForce 9400M - VRAM: 256 MB
    System Software:
        OS X 10.8.3 (12D78) - Uptime: 0 days 1:4:54
    Disk Information:
        Hitachi HTS5450 disk0 : (160.04 GB)
            disk0s1 (disk0s1) <not mounted>: 209.7 MB
            Macintosh HD (disk0s2) / [Startup]: 94.62 GB (48.81 GB free)
            Recovery HD (disk0s3) <not mounted>: 650 MB
            BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 64.57 GB (44.49 GB free)
        HL-DT-ST DVDRW  GS23N 
    USB Information:
        Apple Inc. Built-in iSight
        JMicron Storage 500.11 GB
            BKPFAT (disk1s1) /Volumes/BKPFAT: 443.2 GB (25.08 GB free)
            BKPNTFS (disk1s2) <not mounted>: 56.9 GB
        Apple Internal Memory Card Reader
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
    Configuration files:
        /etc/hosts - Count: 1
    Gatekeeper:
        Anywhere
    Startup Items:
        TuxeraNTFSUnmountHelper: Path: /Library/StartupItems/TuxeraNTFSUnmountHelper
    Launch Daemons:
        [loaded]    com.adobe.fpsaud.plist Support
        [loaded]    com.barebones.authd.plist Support
        [loaded]    com.barebones.textwrangler.plist Support
        [loaded]    com.google.keystone.daemon.plist Support
        [loaded]    com.oracle.java.Helper-Tool.plist Support
        [not loaded]    de.jinx.SmartSleepDaemon.plist Support
        [loaded]    org.macosforge.xquartz.privileged_startx.plist Support
    Launch Agents:
        [loaded]    com.google.keystone.agent.plist Support
        [loaded]    com.oracle.java.Java-Updater.plist Support
        [loaded]    org.macosforge.xquartz.startx.plist Support
    User Login Items:
        GrowlHelperApp
        Google Drive
        witchdaemon
        BetterTouchTool
    Internet Plug-ins:
        JavaAppletPlugin: Version: Java 8 Update 05 Check version
        FlashPlayer-10.6: Version: 12.0.0.38 - SDK 10.6 Support
        QuickTime Plugin: Version: 7.7.1
        Flash Player: Version: 12.0.0.38 - SDK 10.6 Outdated! Update
        o1dbrowserplugin: Version: 5.4.2.18903 Support
        googletalkbrowserplugin: Version: 5.4.2.18903 Support
        Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
        Unity Web Player: Version: UnityPlayer version 4.1.5f1 Support
        iPhotoPhotocast: Version: 7.0
    Safari Extensions:
        Bing Highlights: Version: 1.0.20
        ClickToFlash: Version: 2.5.1
    Audio Plug-ins:
        AirPlay: Version: 1.7 - SDK 10.8
        iSightAudio: Version: 7.7.1 - SDK 10.8
    iTunes Plug-ins:
        Quartz Composer Visualizer: Version: 1.4 - SDK 10.8
    3rd Party Preference Panes:
        Flash Player  Support
        FUSE for OS X (OSXFUSE)  Support
        GamePadCompanionPrefPanel  Support
        Growl  Support
        Java  Support
        MenuMeters  Support
        SmartSleep  Support
        Tuxera NTFS  Support
        Witch  Support
    Time Machine:
        Time Machine not configured!
    Top Processes by CPU:
            25% firefox
             4% activitymonitord
             4% WindowServer
             1% hidd
             1% BetterTouchTool
    Top Processes by Memory:
        254 MB  firefox
        111 MB  Google Chrome
        66 MB   Sublime Text
        61 MB   mds
        59 MB   Google Chrome Helper
    Virtual Memory Information:
        1.72 GB Free RAM
        1.21 GB Active RAM
        416 MB  Inactive RAM
        425 MB  Wired RAM
        378 MB  Page-ins
        0 B Page-outs

    Thread continues as an OSX discussion here, please do not reply this.

Maybe you are looking for

  • Problem with Datapump in 11g

    os windows server 2008 db 11.1.0.7.0 i have created an user with following rigths GRANT EXP_FULL_DATABASE GRANT CREATE JOB GRANT CREATE PROCEDURE GRANT CREATE VIEW GRANT CREATE TABLE GRANT CREATE SESSION GRANT READ ON DIRECTORY data_pump_dir GRANT WR

  • Strange figures in Purchase Analysis report

    Hello, I am running a purchase analysis report and am a little confused by the results. I am running the reports using goods receipts. What I am finding is that there are a vast amount of zero quantity items shown in the results. When I drill down in

  • Error while parsing AS2 message: DECRYPTION_ERROR in Seeburger Workbench

    Dear all, In our production SAP PI 7.1 server, we are getting the below error in the Seeburger Workbench screen. Error: State Error on receive, task will not be retried "State Description Error while parsing AS2 message: DECRYPTION_ERROR # com.seebur

  • Downloading ebook to Adobe Digital Editions produces activation error

    Hi there, So I bought an ebook from the Google ebook store. I then wanted to change it to the Epub format, so I can read it on my Kobo Touch device. Using Digital Editions, I went to 'File', then 'Add to Library'. I went to 'Downloads' on my pc, and

  • [SOLVED] update error, python2-zope-interface

    Hi! I encountered the following error when I wanted to update my system today. What should I do? [martin@faye ~]$ pacman -Syu :: Synchronizing package databases... core is up to date extra is up to date community is up to date multilib is up to date