My Macbook has died. Mail and Firefox wouldn't boot up today and so I turned it off at the button. Now I've just got a spinning wheel and nothing works. In the middle of doing a magazine too, altho I did some backup on a stick. Any suggestions?
My Macbook has died. Mail and Firefox wouldn’t boot up today and so I turned it off at the button. Now I’ve just got a spinning wheel and nothing works. In the middle of doing a magazine too, altho I did some backup on a stick.
Any suggestions?
Try rebooting while holding down the Command and R keys (two keys).
If you see an icon for Recovery, select it and continue.
Then select Disk Utiltiy and press Return.
Now select the hard drive and the Repair Disk.
Quit DU when that is done and restart.
Similar Messages
-
When using my MAC desktop, when I try to play a video on the Apple Homepage I just get a spinning wheel and it says "missing plug-in". What's the issue?
Yep. I installed Lion this morning. Open Mail. All is good. Went to video on the Apple's homepage and my whole computer froze up. I couldn't even shut down the computer properly. I just had to shut it off and restart. :|
Although, no "missing plug in" prompts were coming up for me. Just a frozen (brand new) iMac. -
I tried to restart my iPad -- now all I get is a spinning wheel and can't use my iPad at all
I tried to restart my iPad -- now all I get is a spinning wheel and cannot use my iPad at all??
Try resetting.
Press and hold the On/Off Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. -
Hi
For past year or so my mac book has been getting gradually worse. Spinning wheel, and overheating, last night I had trouble just getting it to start in Safe Mode (been using the on/off button a lot lately!)
Problem may be related to media - iMovie followed by iPhoto are the most likely programs to bring everything to a stop but not always.
I'm not an expert although I did figure out how to re install the operating system from the partition with help from this forum a couple of months ago but it didn't fix the problem.
The iOS is Mountain Lion (via Lion)
I managed to do a back- up last night and now wondering if I should re- install Snow Leopard from the original discs that came with the laptop.
Got a lot of media on there (replaced the 250gb drive with a Samsung 1tb a while back which is less than half full.
Never had to use any of my back-ups before so:
If I re install the original operating system will I be able to be selective in what I put back on later?
and -
Will there be any issues putting a Mountain Lion back-up into a Snow Leopard iOS?
A lot of whats there isn't needed but don't want to lose it completely.
Advice appreciated thanksBack up all data immediately as your boot drive may be failing.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'GPU|I/O' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the window will be empty. If you get output like this:
kernel[0] <Debug>: disk0s2: I/O error
the boot drive is failing, or there's some other hardware fault in the storage subsystem.
If you get output like this:
kernel[0] <Debug>: ** GPU Debug Info Start **
kernel[0] <Debug>: ** GPU Debug Info End **
there's a fault in the graphics processor or logic board. The two kinds of output are not mutually exclusive, but if you get both, a logic-board fault is likely. -
iv just got an iphone 5c and it say;s some writing at the top off me phone
Is there a question here somewhere? Maybe you should try posting in your native language.
-
My husband has an iPad and I just got one for me. We both have the same e-mail address. The message I get when I try to initiate setup is that the Apple ID is already in use. Any ideas on how to complete the setup of the new iPad since we both share the e-mail account?
If you selected open a new Apple ID account, go back a step and enter use existing Apple ID.
You will have to set up a separate iCloud account or your iPads will mirror each other. -
Hello, I just got an iPhone 4S and it seems that the bluetooth function in it doesn't work. I tried few times to pair it to other non Apple phones but it never worked. Does anyone has an idea how to solve the problem? Tks.
This is not a feature of iPhone, iPad or iOS.
Bluetooth is supported for stereo headsets/speakers, handsfree telephone
devices/headsets, some keyboards, some peer-to-peer apps from the
app store and internet tethering where provided by the carrier.
Other than this it will not connect to a phone/computer/device. (thanks to ckuan for the wording) -
Hi all,
My imac (osx 10.6.8), apple mail(4.5) has begun to act very odd. It quits out and on occasion I open an email to face "plugin is missing" or I have a spinning wheel and the email won't open. New to do list fails to add to the list. Can anyone help?Hi all,
My imac (osx 10.6.8), apple mail(4.5) has begun to act very odd. It quits out and on occasion I open an email to face "plugin is missing" or I have a spinning wheel and the email won't open. New to do list fails to add to the list. Can anyone help? -
I have just got an iMac 21" and it continuously freezes when it goes to sleep and also when the internet is trying to load, i have tried three different browsers but it still does it (safari, google chrome and firefox), does anyone know what is wrong?
To fix the freezing when sleeping problem go to System Preferences>Energy Saver and set 'Computer Sleep' to 'Never'. It seems there is a problem for some with Bluetooth failing to wake after sleep. This fixes it 100% for me and many others on here, until Apple issue a software update to address it.
Not sure what to suggest on the internet problem. I assume you are connected and receive and send emails OK.
Edit: To try to troubleshoot the internet issue maybe try turning the Firewall off: System Preferences>Security & Privacy>Firewall tab. -
i just got my ipad 2 and when i go to trun it on it has a picture with itunes prompting me to sync up. When i do this it does not sync up with my itunes. I can not turn my ipad2 on. Any one out there got any answers. Appreciate the help
The first thing that has to be done with a new iPad is to activate it via iTunes. What version of iTunes, and what spec computer, have you got ? The iPad's minimum requirements are (from http://www.apple.com/ipad/specs/) :
Mac :
Mac computer with USB 2.0 port
Mac OS X v10.5.8 or later
iTunes 10.2 or later recommended
(free download from www.itunes.com/download)
iTunes Store account
Internet access
PC :
PC with USB 2.0 port
Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.2 or later recommended
(free download from www.itunes.com/download)
iTunes Store account
Internet access
Edit : there is troubleshootin here :
pc - http://support.apple.com/kb/TS1538
mac - http://support.apple.com/kb/TS1591
Message was edited by: King_Penguin -
I just got an iPhone 5s and it won't let me add my hotmail email address to my mail. I can add it under outlook but then it doesn't show me all the emails or folders I have, I have to login in via the we page to view them, too inconvenient... Please help!
Open Mail app and then click on Mailboxes(Left up)>Go down and select your Hotmail acoount and then try Refreshing by pulling down the list.
-
The display suddently changed two days ago. Everthing exploded in size. I have tried changing the contrast but nothing works. The display screen becomes either too wide, too long, or too narrow and in all cases the font is extra large and out of focus. What can I do please I am really disappointed since my iMac is only 2.5 months old.
Don't think so. But tried it anyway. I have been into utilities and tried different contrast settings now I don't know what is the right one. But no matter which one I tried I have either about a third of the screen black, with display centered as though hidden behind the black. What is going on?
Also, I have to say that I can't understand why there is no information anywhere on what the correct settings should be.
Any ideas Capt? -
I have a 2009 Macbook Pro with 1T hdd 8GB Ram and ran Maverick without problem...Yosemite installation has me completely frozen, nothing works but the spinning ball...I had to force shutdown last night, and haven't turned it on again...what do you advise? During installation emptied cache, etc. Backed up using time machine, fortunately.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
I just got a new IPAD and transferred everything through the cloud from my old IPAD 2. The new one says "this IPAD is currently being restored. It has been that way for over two hours. Also, I Books opens and then closes right away with no content. Does it take this long, or is there an issue?
I also tried manually underlining a few things on the new iPad and when highlighting a paragraph, it would skip a few lines and the line would go through a few as well. Looks like a major iBooks glitch needs to be addressed here.
-
why does creative cloud is still asking serial number after i purchase and it wouldn't let me use it anymore because my trial is over need help NOW PLZ
Hi There,
Kindly try the following steps:
Sign out and sign in to Creative Cloud app: Sign out, Sign in | Creative Cloud Desktop app
Sign in, activation, or connection errors | CS5.5 and later
Thanks.
Atul Saini
Maybe you are looking for
-
Updating XML and not seeing changes reflected
We have a very basic xml that we are using to insert a field into the custom panel. The file is as follows: <?xml version="1.0"><!DOCTYPE panel SYSTEM "[http://ns.adobe.com/custompanels/1.0 | http://ns.adobe.com/custompanels/1.0]"><panel title="$$$/
-
Message type control for movement type
Hi All, We are using two movment types, 301 - Plant to plant transfer 934- initial stock entry reversal(custom one). Issue is when ever available stock of materia lM1 is consumed against some sales orders , if we try to do transfer posting using tran
-
WAAS - Custom Reporting - Documentation
Does anyone have a link to documentation regarding creating custom reports on the WAAS appliance? I have been told that you can create a custom report that will let me look at data for a specific port on a specific day during a specific time. What I
-
Blurb/Booksmart will not open since I have installed Yosemite. The error message requires Java 6, is there a fix?
-
I always get a unresponsive script error from chrome://browser/content/browser.js:5582 . If I uninstall and reinstall firefox, It'll stop for awhile. My os is ubuntu 10.04 64 bit. == User Agent == Mozilla/5.0 (X11; U; Linux x86_64; en-US) AppleWebKit